mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-03 00:54:09 +08:00
87e4ee759f
The timers are common to both A9 cores, so let's set the clock event struct's cpumask accordingly, to all possible CPUs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
325 lines
8.7 KiB
C
325 lines
8.7 KiB
C
/*
|
|
* This file contains driver for the Xilinx PS Timer Counter IP.
|
|
*
|
|
* Copyright (C) 2011 Xilinx
|
|
*
|
|
* based on arch/mips/kernel/time.c timer driver
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk-provider.h>
|
|
#include "common.h"
|
|
|
|
/*
|
|
* Timer Register Offset Definitions of Timer 1, Increment base address by 4
|
|
* and use same offsets for Timer 2
|
|
*/
|
|
#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
|
|
#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
|
|
#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
|
|
#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
|
|
#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
|
|
#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
|
|
|
|
#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1
|
|
|
|
/*
|
|
* Setup the timers to use pre-scaling, using a fixed value for now that will
|
|
* work across most input frequency, but it may need to be more dynamic
|
|
*/
|
|
#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
|
|
#define PRESCALE 2048 /* The exponent must match this */
|
|
#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
|
|
#define CLK_CNTRL_PRESCALE_EN 1
|
|
#define CNT_CNTRL_RESET (1<<4)
|
|
|
|
/**
|
|
* struct xttcps_timer - This definition defines local timer structure
|
|
*
|
|
* @base_addr: Base address of timer
|
|
**/
|
|
struct xttcps_timer {
|
|
void __iomem *base_addr;
|
|
};
|
|
|
|
struct xttcps_timer_clocksource {
|
|
struct xttcps_timer xttc;
|
|
struct clocksource cs;
|
|
};
|
|
|
|
#define to_xttcps_timer_clksrc(x) \
|
|
container_of(x, struct xttcps_timer_clocksource, cs)
|
|
|
|
struct xttcps_timer_clockevent {
|
|
struct xttcps_timer xttc;
|
|
struct clock_event_device ce;
|
|
struct clk *clk;
|
|
};
|
|
|
|
#define to_xttcps_timer_clkevent(x) \
|
|
container_of(x, struct xttcps_timer_clockevent, ce)
|
|
|
|
/**
|
|
* xttcps_set_interval - Set the timer interval value
|
|
*
|
|
* @timer: Pointer to the timer instance
|
|
* @cycles: Timer interval ticks
|
|
**/
|
|
static void xttcps_set_interval(struct xttcps_timer *timer,
|
|
unsigned long cycles)
|
|
{
|
|
u32 ctrl_reg;
|
|
|
|
/* Disable the counter, set the counter value and re-enable counter */
|
|
ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
|
|
__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
|
|
__raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
|
|
|
|
/*
|
|
* Reset the counter (0x10) so that it starts from 0, one-shot
|
|
* mode makes this needed for timing to be right.
|
|
*/
|
|
ctrl_reg |= CNT_CNTRL_RESET;
|
|
ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
|
|
__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* xttcps_clock_event_interrupt - Clock event timer interrupt handler
|
|
*
|
|
* @irq: IRQ number of the Timer
|
|
* @dev_id: void pointer to the xttcps_timer instance
|
|
*
|
|
* returns: Always IRQ_HANDLED - success
|
|
**/
|
|
static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct xttcps_timer_clockevent *xttce = dev_id;
|
|
struct xttcps_timer *timer = &xttce->xttc;
|
|
|
|
/* Acknowledge the interrupt and call event handler */
|
|
__raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
|
|
|
|
xttce->ce.event_handler(&xttce->ce);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* __xttc_clocksource_read - Reads the timer counter register
|
|
*
|
|
* returns: Current timer counter register value
|
|
**/
|
|
static cycle_t __xttc_clocksource_read(struct clocksource *cs)
|
|
{
|
|
struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
|
|
|
|
return (cycle_t)__raw_readl(timer->base_addr +
|
|
XTTCPS_COUNT_VAL_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* xttcps_set_next_event - Sets the time interval for next event
|
|
*
|
|
* @cycles: Timer interval ticks
|
|
* @evt: Address of clock event instance
|
|
*
|
|
* returns: Always 0 - success
|
|
**/
|
|
static int xttcps_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
|
|
struct xttcps_timer *timer = &xttce->xttc;
|
|
|
|
xttcps_set_interval(timer, cycles);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xttcps_set_mode - Sets the mode of timer
|
|
*
|
|
* @mode: Mode to be set
|
|
* @evt: Address of clock event instance
|
|
**/
|
|
static void xttcps_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *evt)
|
|
{
|
|
struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
|
|
struct xttcps_timer *timer = &xttce->xttc;
|
|
u32 ctrl_reg;
|
|
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC:
|
|
xttcps_set_interval(timer,
|
|
DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
|
|
PRESCALE * HZ));
|
|
break;
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
ctrl_reg = __raw_readl(timer->base_addr +
|
|
XTTCPS_CNT_CNTRL_OFFSET);
|
|
ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
|
|
__raw_writel(ctrl_reg,
|
|
timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
break;
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
ctrl_reg = __raw_readl(timer->base_addr +
|
|
XTTCPS_CNT_CNTRL_OFFSET);
|
|
ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
|
|
__raw_writel(ctrl_reg,
|
|
timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __init zynq_ttc_setup_clocksource(struct device_node *np,
|
|
void __iomem *base)
|
|
{
|
|
struct xttcps_timer_clocksource *ttccs;
|
|
struct clk *clk;
|
|
int err;
|
|
u32 reg;
|
|
|
|
ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
|
|
if (WARN_ON(!ttccs))
|
|
return;
|
|
|
|
err = of_property_read_u32(np, "reg", ®);
|
|
if (WARN_ON(err))
|
|
return;
|
|
|
|
clk = of_clk_get_by_name(np, "cpu_1x");
|
|
if (WARN_ON(IS_ERR(clk)))
|
|
return;
|
|
|
|
err = clk_prepare_enable(clk);
|
|
if (WARN_ON(err))
|
|
return;
|
|
|
|
ttccs->xttc.base_addr = base + reg * 4;
|
|
|
|
ttccs->cs.name = np->name;
|
|
ttccs->cs.rating = 200;
|
|
ttccs->cs.read = __xttc_clocksource_read;
|
|
ttccs->cs.mask = CLOCKSOURCE_MASK(16);
|
|
ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
|
|
|
|
__raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
|
|
__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
|
|
ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
|
|
__raw_writel(CNT_CNTRL_RESET,
|
|
ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
|
|
err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
|
|
if (WARN_ON(err))
|
|
return;
|
|
}
|
|
|
|
static void __init zynq_ttc_setup_clockevent(struct device_node *np,
|
|
void __iomem *base)
|
|
{
|
|
struct xttcps_timer_clockevent *ttcce;
|
|
int err, irq;
|
|
u32 reg;
|
|
|
|
ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
|
|
if (WARN_ON(!ttcce))
|
|
return;
|
|
|
|
err = of_property_read_u32(np, "reg", ®);
|
|
if (WARN_ON(err))
|
|
return;
|
|
|
|
ttcce->xttc.base_addr = base + reg * 4;
|
|
|
|
ttcce->clk = of_clk_get_by_name(np, "cpu_1x");
|
|
if (WARN_ON(IS_ERR(ttcce->clk)))
|
|
return;
|
|
|
|
err = clk_prepare_enable(ttcce->clk);
|
|
if (WARN_ON(err))
|
|
return;
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
if (WARN_ON(!irq))
|
|
return;
|
|
|
|
ttcce->ce.name = np->name;
|
|
ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
|
|
ttcce->ce.set_next_event = xttcps_set_next_event;
|
|
ttcce->ce.set_mode = xttcps_set_mode;
|
|
ttcce->ce.rating = 200;
|
|
ttcce->ce.irq = irq;
|
|
ttcce->ce.cpumask = cpu_possible_mask;
|
|
|
|
__raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
|
|
__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
|
|
ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
|
|
__raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
|
|
|
|
err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
|
|
np->name, ttcce);
|
|
if (WARN_ON(err))
|
|
return;
|
|
|
|
clockevents_config_and_register(&ttcce->ce,
|
|
clk_get_rate(ttcce->clk) / PRESCALE,
|
|
1, 0xfffe);
|
|
}
|
|
|
|
static const __initconst struct of_device_id zynq_ttc_match[] = {
|
|
{ .compatible = "xlnx,ttc-counter-clocksource",
|
|
.data = zynq_ttc_setup_clocksource, },
|
|
{ .compatible = "xlnx,ttc-counter-clockevent",
|
|
.data = zynq_ttc_setup_clockevent, },
|
|
{}
|
|
};
|
|
|
|
/**
|
|
* xttcps_timer_init - Initialize the timer
|
|
*
|
|
* Initializes the timer hardware and register the clock source and clock event
|
|
* timers with Linux kernal timer framework
|
|
**/
|
|
void __init xttcps_timer_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
for_each_compatible_node(np, NULL, "xlnx,ttc") {
|
|
struct device_node *np_chld;
|
|
void __iomem *base;
|
|
|
|
base = of_iomap(np, 0);
|
|
if (WARN_ON(!base))
|
|
return;
|
|
|
|
for_each_available_child_of_node(np, np_chld) {
|
|
int (*cb)(struct device_node *np, void __iomem *base);
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(zynq_ttc_match, np_chld);
|
|
if (match) {
|
|
cb = match->data;
|
|
cb(np_chld, base);
|
|
}
|
|
}
|
|
}
|
|
}
|