mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
34dcdebecf
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates. The patch implements the functionality to select at runtime the appropriate AUDIO PLL as function of audio file rate. As the clock parent may be changed, need to probe txclk according to sample rate again. Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1656667961-1799-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
1758 lines
49 KiB
C
1758 lines
49 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Freescale S/PDIF ALSA SoC Digital Audio Interface (DAI) driver
|
|
//
|
|
// Copyright (C) 2013 Freescale Semiconductor, Inc.
|
|
//
|
|
// Based on stmp3xxx_spdif_dai.c
|
|
// Vladimir Barinov <vbarinov@embeddedalley.com>
|
|
// Copyright 2008 SigmaTel, Inc
|
|
// Copyright 2008 Embedded Alley Solutions, Inc
|
|
|
|
#include <linux/bitrev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <sound/asoundef.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include "fsl_spdif.h"
|
|
#include "fsl_utils.h"
|
|
#include "imx-pcm.h"
|
|
|
|
#define FSL_SPDIF_TXFIFO_WML 0x8
|
|
#define FSL_SPDIF_RXFIFO_WML 0x8
|
|
|
|
#define INTR_FOR_PLAYBACK (INT_TXFIFO_RESYNC)
|
|
#define INTR_FOR_CAPTURE (INT_SYM_ERR | INT_BIT_ERR | INT_URX_FUL |\
|
|
INT_URX_OV | INT_QRX_FUL | INT_QRX_OV |\
|
|
INT_UQ_SYNC | INT_UQ_ERR | INT_RXFIFO_RESYNC |\
|
|
INT_LOSS_LOCK | INT_DPLL_LOCKED)
|
|
|
|
#define SIE_INTR_FOR(tx) (tx ? INTR_FOR_PLAYBACK : INTR_FOR_CAPTURE)
|
|
|
|
/* Index list for the values that has if (DPLL Locked) condition */
|
|
static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb };
|
|
#define SRPC_NODPLL_START1 0x5
|
|
#define SRPC_NODPLL_START2 0xc
|
|
|
|
#define DEFAULT_RXCLK_SRC 1
|
|
|
|
/**
|
|
* struct fsl_spdif_soc_data: soc specific data
|
|
*
|
|
* @imx: for imx platform
|
|
* @shared_root_clock: flag of sharing a clock source with others;
|
|
* so the driver shouldn't set root clock rate
|
|
* @raw_capture_mode: if raw capture mode support
|
|
* @cchannel_192b: if there are registers for 192bits C channel data
|
|
* @interrupts: interrupt number
|
|
* @tx_burst: tx maxburst size
|
|
* @rx_burst: rx maxburst size
|
|
* @tx_formats: tx supported data format
|
|
*/
|
|
struct fsl_spdif_soc_data {
|
|
bool imx;
|
|
bool shared_root_clock;
|
|
bool raw_capture_mode;
|
|
bool cchannel_192b;
|
|
u32 interrupts;
|
|
u32 tx_burst;
|
|
u32 rx_burst;
|
|
u64 tx_formats;
|
|
};
|
|
|
|
/*
|
|
* SPDIF control structure
|
|
* Defines channel status, subcode and Q sub
|
|
*/
|
|
struct spdif_mixer_control {
|
|
/* spinlock to access control data */
|
|
spinlock_t ctl_lock;
|
|
|
|
/* IEC958 channel tx status bit */
|
|
unsigned char ch_status[4];
|
|
|
|
/* User bits */
|
|
unsigned char subcode[2 * SPDIF_UBITS_SIZE];
|
|
|
|
/* Q subcode part of user bits */
|
|
unsigned char qsub[2 * SPDIF_QSUB_SIZE];
|
|
|
|
/* Buffer offset for U/Q */
|
|
u32 upos;
|
|
u32 qpos;
|
|
|
|
/* Ready buffer index of the two buffers */
|
|
u32 ready_buf;
|
|
};
|
|
|
|
/**
|
|
* struct fsl_spdif_priv - Freescale SPDIF private data
|
|
* @soc: SPDIF soc data
|
|
* @fsl_spdif_control: SPDIF control data
|
|
* @cpu_dai_drv: cpu dai driver
|
|
* @pdev: platform device pointer
|
|
* @regmap: regmap handler
|
|
* @dpll_locked: dpll lock flag
|
|
* @txrate: the best rates for playback
|
|
* @txclk_df: STC_TXCLK_DF dividers value for playback
|
|
* @sysclk_df: STC_SYSCLK_DF dividers value for playback
|
|
* @txclk_src: STC_TXCLK_SRC values for playback
|
|
* @rxclk_src: SRPC_CLKSRC_SEL values for capture
|
|
* @txclk: tx clock sources for playback
|
|
* @rxclk: rx clock sources for capture
|
|
* @coreclk: core clock for register access via DMA
|
|
* @sysclk: system clock for rx clock rate measurement
|
|
* @spbaclk: SPBA clock (optional, depending on SoC design)
|
|
* @dma_params_tx: DMA parameters for transmit channel
|
|
* @dma_params_rx: DMA parameters for receive channel
|
|
* @regcache_srpc: regcache for SRPC
|
|
* @bypass: status of bypass input to output
|
|
* @pll8k_clk: PLL clock for the rate of multiply of 8kHz
|
|
* @pll11k_clk: PLL clock for the rate of multiply of 11kHz
|
|
*/
|
|
struct fsl_spdif_priv {
|
|
const struct fsl_spdif_soc_data *soc;
|
|
struct spdif_mixer_control fsl_spdif_control;
|
|
struct snd_soc_dai_driver cpu_dai_drv;
|
|
struct platform_device *pdev;
|
|
struct regmap *regmap;
|
|
bool dpll_locked;
|
|
u32 txrate[SPDIF_TXRATE_MAX];
|
|
u8 txclk_df[SPDIF_TXRATE_MAX];
|
|
u16 sysclk_df[SPDIF_TXRATE_MAX];
|
|
u8 txclk_src[SPDIF_TXRATE_MAX];
|
|
u8 rxclk_src;
|
|
struct clk *txclk[STC_TXCLK_SRC_MAX];
|
|
struct clk *rxclk;
|
|
struct clk *coreclk;
|
|
struct clk *sysclk;
|
|
struct clk *spbaclk;
|
|
struct snd_dmaengine_dai_dma_data dma_params_tx;
|
|
struct snd_dmaengine_dai_dma_data dma_params_rx;
|
|
/* regcache for SRPC */
|
|
u32 regcache_srpc;
|
|
bool bypass;
|
|
struct clk *pll8k_clk;
|
|
struct clk *pll11k_clk;
|
|
};
|
|
|
|
static struct fsl_spdif_soc_data fsl_spdif_vf610 = {
|
|
.imx = false,
|
|
.shared_root_clock = false,
|
|
.raw_capture_mode = false,
|
|
.interrupts = 1,
|
|
.tx_burst = FSL_SPDIF_TXFIFO_WML,
|
|
.rx_burst = FSL_SPDIF_RXFIFO_WML,
|
|
.tx_formats = FSL_SPDIF_FORMATS_PLAYBACK,
|
|
};
|
|
|
|
static struct fsl_spdif_soc_data fsl_spdif_imx35 = {
|
|
.imx = true,
|
|
.shared_root_clock = false,
|
|
.raw_capture_mode = false,
|
|
.interrupts = 1,
|
|
.tx_burst = FSL_SPDIF_TXFIFO_WML,
|
|
.rx_burst = FSL_SPDIF_RXFIFO_WML,
|
|
.tx_formats = FSL_SPDIF_FORMATS_PLAYBACK,
|
|
};
|
|
|
|
static struct fsl_spdif_soc_data fsl_spdif_imx6sx = {
|
|
.imx = true,
|
|
.shared_root_clock = true,
|
|
.raw_capture_mode = false,
|
|
.interrupts = 1,
|
|
.tx_burst = FSL_SPDIF_TXFIFO_WML,
|
|
.rx_burst = FSL_SPDIF_RXFIFO_WML,
|
|
.tx_formats = FSL_SPDIF_FORMATS_PLAYBACK,
|
|
|
|
};
|
|
|
|
static struct fsl_spdif_soc_data fsl_spdif_imx8qm = {
|
|
.imx = true,
|
|
.shared_root_clock = true,
|
|
.raw_capture_mode = false,
|
|
.interrupts = 2,
|
|
.tx_burst = 2, /* Applied for EDMA */
|
|
.rx_burst = 2, /* Applied for EDMA */
|
|
.tx_formats = SNDRV_PCM_FMTBIT_S24_LE, /* Applied for EDMA */
|
|
};
|
|
|
|
static struct fsl_spdif_soc_data fsl_spdif_imx8mm = {
|
|
.imx = true,
|
|
.shared_root_clock = false,
|
|
.raw_capture_mode = true,
|
|
.interrupts = 1,
|
|
.tx_burst = FSL_SPDIF_TXFIFO_WML,
|
|
.rx_burst = FSL_SPDIF_RXFIFO_WML,
|
|
.tx_formats = FSL_SPDIF_FORMATS_PLAYBACK,
|
|
};
|
|
|
|
static struct fsl_spdif_soc_data fsl_spdif_imx8ulp = {
|
|
.imx = true,
|
|
.shared_root_clock = true,
|
|
.raw_capture_mode = false,
|
|
.interrupts = 1,
|
|
.tx_burst = 2, /* Applied for EDMA */
|
|
.rx_burst = 2, /* Applied for EDMA */
|
|
.tx_formats = SNDRV_PCM_FMTBIT_S24_LE, /* Applied for EDMA */
|
|
.cchannel_192b = true,
|
|
};
|
|
|
|
/* Check if clk is a root clock that does not share clock source with others */
|
|
static inline bool fsl_spdif_can_set_clk_rate(struct fsl_spdif_priv *spdif, int clk)
|
|
{
|
|
return (clk == STC_TXCLK_SPDIF_ROOT) && !spdif->soc->shared_root_clock;
|
|
}
|
|
|
|
/* DPLL locked and lock loss interrupt handler */
|
|
static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u32 locked;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SRPC, &locked);
|
|
locked &= SRPC_DPLL_LOCKED;
|
|
|
|
dev_dbg(&pdev->dev, "isr: Rx dpll %s \n",
|
|
locked ? "locked" : "loss lock");
|
|
|
|
spdif_priv->dpll_locked = locked ? true : false;
|
|
}
|
|
|
|
/* Receiver found illegal symbol interrupt handler */
|
|
static void spdif_irq_sym_error(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
|
|
dev_dbg(&pdev->dev, "isr: receiver found illegal symbol\n");
|
|
|
|
/* Clear illegal symbol if DPLL unlocked since no audio stream */
|
|
if (!spdif_priv->dpll_locked)
|
|
regmap_update_bits(regmap, REG_SPDIF_SIE, INT_SYM_ERR, 0);
|
|
}
|
|
|
|
/* U/Q Channel receive register full */
|
|
static void spdif_irq_uqrx_full(struct fsl_spdif_priv *spdif_priv, char name)
|
|
{
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u32 *pos, size, val, reg;
|
|
|
|
switch (name) {
|
|
case 'U':
|
|
pos = &ctrl->upos;
|
|
size = SPDIF_UBITS_SIZE;
|
|
reg = REG_SPDIF_SRU;
|
|
break;
|
|
case 'Q':
|
|
pos = &ctrl->qpos;
|
|
size = SPDIF_QSUB_SIZE;
|
|
reg = REG_SPDIF_SRQ;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "unsupported channel name\n");
|
|
return;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "isr: %c Channel receive register full\n", name);
|
|
|
|
if (*pos >= size * 2) {
|
|
*pos = 0;
|
|
} else if (unlikely((*pos % size) + 3 > size)) {
|
|
dev_err(&pdev->dev, "User bit receive buffer overflow\n");
|
|
return;
|
|
}
|
|
|
|
regmap_read(regmap, reg, &val);
|
|
ctrl->subcode[*pos++] = val >> 16;
|
|
ctrl->subcode[*pos++] = val >> 8;
|
|
ctrl->subcode[*pos++] = val;
|
|
}
|
|
|
|
/* U/Q Channel sync found */
|
|
static void spdif_irq_uq_sync(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
|
|
dev_dbg(&pdev->dev, "isr: U/Q Channel sync found\n");
|
|
|
|
/* U/Q buffer reset */
|
|
if (ctrl->qpos == 0)
|
|
return;
|
|
|
|
/* Set ready to this buffer */
|
|
ctrl->ready_buf = (ctrl->qpos - 1) / SPDIF_QSUB_SIZE + 1;
|
|
}
|
|
|
|
/* U/Q Channel framing error */
|
|
static void spdif_irq_uq_err(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u32 val;
|
|
|
|
dev_dbg(&pdev->dev, "isr: U/Q Channel framing error\n");
|
|
|
|
/* Read U/Q data to clear the irq and do buffer reset */
|
|
regmap_read(regmap, REG_SPDIF_SRU, &val);
|
|
regmap_read(regmap, REG_SPDIF_SRQ, &val);
|
|
|
|
/* Drop this U/Q buffer */
|
|
ctrl->ready_buf = 0;
|
|
ctrl->upos = 0;
|
|
ctrl->qpos = 0;
|
|
}
|
|
|
|
/* Get spdif interrupt status and clear the interrupt */
|
|
static u32 spdif_intr_status_clear(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val, val2;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SIS, &val);
|
|
regmap_read(regmap, REG_SPDIF_SIE, &val2);
|
|
|
|
regmap_write(regmap, REG_SPDIF_SIC, val & val2);
|
|
|
|
return val;
|
|
}
|
|
|
|
static irqreturn_t spdif_isr(int irq, void *devid)
|
|
{
|
|
struct fsl_spdif_priv *spdif_priv = (struct fsl_spdif_priv *)devid;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u32 sis;
|
|
|
|
sis = spdif_intr_status_clear(spdif_priv);
|
|
|
|
if (sis & INT_DPLL_LOCKED)
|
|
spdif_irq_dpll_lock(spdif_priv);
|
|
|
|
if (sis & INT_TXFIFO_UNOV)
|
|
dev_dbg(&pdev->dev, "isr: Tx FIFO under/overrun\n");
|
|
|
|
if (sis & INT_TXFIFO_RESYNC)
|
|
dev_dbg(&pdev->dev, "isr: Tx FIFO resync\n");
|
|
|
|
if (sis & INT_CNEW)
|
|
dev_dbg(&pdev->dev, "isr: cstatus new\n");
|
|
|
|
if (sis & INT_VAL_NOGOOD)
|
|
dev_dbg(&pdev->dev, "isr: validity flag no good\n");
|
|
|
|
if (sis & INT_SYM_ERR)
|
|
spdif_irq_sym_error(spdif_priv);
|
|
|
|
if (sis & INT_BIT_ERR)
|
|
dev_dbg(&pdev->dev, "isr: receiver found parity bit error\n");
|
|
|
|
if (sis & INT_URX_FUL)
|
|
spdif_irq_uqrx_full(spdif_priv, 'U');
|
|
|
|
if (sis & INT_URX_OV)
|
|
dev_dbg(&pdev->dev, "isr: U Channel receive register overrun\n");
|
|
|
|
if (sis & INT_QRX_FUL)
|
|
spdif_irq_uqrx_full(spdif_priv, 'Q');
|
|
|
|
if (sis & INT_QRX_OV)
|
|
dev_dbg(&pdev->dev, "isr: Q Channel receive register overrun\n");
|
|
|
|
if (sis & INT_UQ_SYNC)
|
|
spdif_irq_uq_sync(spdif_priv);
|
|
|
|
if (sis & INT_UQ_ERR)
|
|
spdif_irq_uq_err(spdif_priv);
|
|
|
|
if (sis & INT_RXFIFO_UNOV)
|
|
dev_dbg(&pdev->dev, "isr: Rx FIFO under/overrun\n");
|
|
|
|
if (sis & INT_RXFIFO_RESYNC)
|
|
dev_dbg(&pdev->dev, "isr: Rx FIFO resync\n");
|
|
|
|
if (sis & INT_LOSS_LOCK)
|
|
spdif_irq_dpll_lock(spdif_priv);
|
|
|
|
/* FIXME: Write Tx FIFO to clear TxEm */
|
|
if (sis & INT_TX_EM)
|
|
dev_dbg(&pdev->dev, "isr: Tx FIFO empty\n");
|
|
|
|
/* FIXME: Read Rx FIFO to clear RxFIFOFul */
|
|
if (sis & INT_RXFIFO_FUL)
|
|
dev_dbg(&pdev->dev, "isr: Rx FIFO full\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int spdif_softreset(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val, cycle = 1000;
|
|
|
|
regcache_cache_bypass(regmap, true);
|
|
|
|
regmap_write(regmap, REG_SPDIF_SCR, SCR_SOFT_RESET);
|
|
|
|
/*
|
|
* RESET bit would be cleared after finishing its reset procedure,
|
|
* which typically lasts 8 cycles. 1000 cycles will keep it safe.
|
|
*/
|
|
do {
|
|
regmap_read(regmap, REG_SPDIF_SCR, &val);
|
|
} while ((val & SCR_SOFT_RESET) && cycle--);
|
|
|
|
regcache_cache_bypass(regmap, false);
|
|
regcache_mark_dirty(regmap);
|
|
regcache_sync(regmap);
|
|
|
|
if (cycle)
|
|
return 0;
|
|
else
|
|
return -EBUSY;
|
|
}
|
|
|
|
static void spdif_set_cstatus(struct spdif_mixer_control *ctrl,
|
|
u8 mask, u8 cstatus)
|
|
{
|
|
ctrl->ch_status[3] &= ~mask;
|
|
ctrl->ch_status[3] |= cstatus & mask;
|
|
}
|
|
|
|
static void spdif_write_channel_status(struct fsl_spdif_priv *spdif_priv)
|
|
{
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u32 ch_status;
|
|
|
|
ch_status = (bitrev8(ctrl->ch_status[0]) << 16) |
|
|
(bitrev8(ctrl->ch_status[1]) << 8) |
|
|
bitrev8(ctrl->ch_status[2]);
|
|
regmap_write(regmap, REG_SPDIF_STCSCH, ch_status);
|
|
|
|
dev_dbg(&pdev->dev, "STCSCH: 0x%06x\n", ch_status);
|
|
|
|
ch_status = bitrev8(ctrl->ch_status[3]) << 16;
|
|
regmap_write(regmap, REG_SPDIF_STCSCL, ch_status);
|
|
|
|
dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status);
|
|
|
|
if (spdif_priv->soc->cchannel_192b) {
|
|
ch_status = (bitrev8(ctrl->ch_status[0]) << 24) |
|
|
(bitrev8(ctrl->ch_status[1]) << 16) |
|
|
(bitrev8(ctrl->ch_status[2]) << 8) |
|
|
bitrev8(ctrl->ch_status[3]);
|
|
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, 0x1000000, 0x1000000);
|
|
|
|
/*
|
|
* The first 32bit should be in REG_SPDIF_STCCA_31_0 register,
|
|
* but here we need to set REG_SPDIF_STCCA_191_160 on 8ULP
|
|
* then can get correct result with HDMI analyzer capture.
|
|
* There is a hardware bug here.
|
|
*/
|
|
regmap_write(regmap, REG_SPDIF_STCCA_191_160, ch_status);
|
|
}
|
|
}
|
|
|
|
/* Set SPDIF PhaseConfig register for rx clock */
|
|
static int spdif_set_rx_clksrc(struct fsl_spdif_priv *spdif_priv,
|
|
enum spdif_gainsel gainsel, int dpll_locked)
|
|
{
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u8 clksrc = spdif_priv->rxclk_src;
|
|
|
|
if (clksrc >= SRPC_CLKSRC_MAX || gainsel >= GAINSEL_MULTI_MAX)
|
|
return -EINVAL;
|
|
|
|
regmap_update_bits(regmap, REG_SPDIF_SRPC,
|
|
SRPC_CLKSRC_SEL_MASK | SRPC_GAINSEL_MASK,
|
|
SRPC_CLKSRC_SEL_SET(clksrc) | SRPC_GAINSEL_SET(gainsel));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, enum spdif_txrate index);
|
|
|
|
static int spdif_set_sample_rate(struct snd_pcm_substream *substream,
|
|
int sample_rate)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
unsigned long csfs = 0;
|
|
u32 stc, mask, rate;
|
|
u16 sysclk_df;
|
|
u8 clk, txclk_df;
|
|
int ret;
|
|
|
|
switch (sample_rate) {
|
|
case 32000:
|
|
rate = SPDIF_TXRATE_32000;
|
|
csfs = IEC958_AES3_CON_FS_32000;
|
|
break;
|
|
case 44100:
|
|
rate = SPDIF_TXRATE_44100;
|
|
csfs = IEC958_AES3_CON_FS_44100;
|
|
break;
|
|
case 48000:
|
|
rate = SPDIF_TXRATE_48000;
|
|
csfs = IEC958_AES3_CON_FS_48000;
|
|
break;
|
|
case 88200:
|
|
rate = SPDIF_TXRATE_88200;
|
|
csfs = IEC958_AES3_CON_FS_88200;
|
|
break;
|
|
case 96000:
|
|
rate = SPDIF_TXRATE_96000;
|
|
csfs = IEC958_AES3_CON_FS_96000;
|
|
break;
|
|
case 176400:
|
|
rate = SPDIF_TXRATE_176400;
|
|
csfs = IEC958_AES3_CON_FS_176400;
|
|
break;
|
|
case 192000:
|
|
rate = SPDIF_TXRATE_192000;
|
|
csfs = IEC958_AES3_CON_FS_192000;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "unsupported sample rate %d\n", sample_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = fsl_spdif_probe_txclk(spdif_priv, rate);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk = spdif_priv->txclk_src[rate];
|
|
if (clk >= STC_TXCLK_SRC_MAX) {
|
|
dev_err(&pdev->dev, "tx clock source is out of range\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
txclk_df = spdif_priv->txclk_df[rate];
|
|
if (txclk_df == 0) {
|
|
dev_err(&pdev->dev, "the txclk_df can't be zero\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
sysclk_df = spdif_priv->sysclk_df[rate];
|
|
|
|
if (!fsl_spdif_can_set_clk_rate(spdif_priv, clk))
|
|
goto clk_set_bypass;
|
|
|
|
/* The S/PDIF block needs a clock of 64 * fs * txclk_df */
|
|
ret = clk_set_rate(spdif_priv->txclk[clk],
|
|
64 * sample_rate * txclk_df);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to set tx clock rate\n");
|
|
return ret;
|
|
}
|
|
|
|
clk_set_bypass:
|
|
dev_dbg(&pdev->dev, "expected clock rate = %d\n",
|
|
(64 * sample_rate * txclk_df * sysclk_df));
|
|
dev_dbg(&pdev->dev, "actual clock rate = %ld\n",
|
|
clk_get_rate(spdif_priv->txclk[clk]));
|
|
|
|
/* set fs field in consumer channel status */
|
|
spdif_set_cstatus(ctrl, IEC958_AES3_CON_FS, csfs);
|
|
|
|
/* select clock source and divisor */
|
|
stc = STC_TXCLK_ALL_EN | STC_TXCLK_SRC_SET(clk) |
|
|
STC_TXCLK_DF(txclk_df) | STC_SYSCLK_DF(sysclk_df);
|
|
mask = STC_TXCLK_ALL_EN_MASK | STC_TXCLK_SRC_MASK |
|
|
STC_TXCLK_DF_MASK | STC_SYSCLK_DF_MASK;
|
|
regmap_update_bits(regmap, REG_SPDIF_STC, mask, stc);
|
|
|
|
dev_dbg(&pdev->dev, "set sample rate to %dHz for %dHz playback\n",
|
|
spdif_priv->txrate[rate], sample_rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 scr, mask;
|
|
int ret;
|
|
|
|
/* Reset module and interrupts only for first initialization */
|
|
if (!snd_soc_dai_active(cpu_dai)) {
|
|
ret = spdif_softreset(spdif_priv);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to soft reset\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Disable all the interrupts */
|
|
regmap_update_bits(regmap, REG_SPDIF_SIE, 0xffffff, 0);
|
|
}
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
scr = SCR_TXFIFO_AUTOSYNC | SCR_TXFIFO_CTRL_NORMAL |
|
|
SCR_TXSEL_NORMAL | SCR_USRC_SEL_CHIP |
|
|
SCR_TXFIFO_FSEL_IF8;
|
|
mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK |
|
|
SCR_TXSEL_MASK | SCR_USRC_SEL_MASK |
|
|
SCR_TXFIFO_FSEL_MASK;
|
|
} else {
|
|
scr = SCR_RXFIFO_FSEL_IF8 | SCR_RXFIFO_AUTOSYNC;
|
|
mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK|
|
|
SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK;
|
|
}
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
|
|
|
|
/* Power up SPDIF module */
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 scr, mask;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
scr = 0;
|
|
mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK |
|
|
SCR_TXSEL_MASK | SCR_USRC_SEL_MASK |
|
|
SCR_TXFIFO_FSEL_MASK;
|
|
/* Disable TX clock */
|
|
regmap_update_bits(regmap, REG_SPDIF_STC, STC_TXCLK_ALL_EN_MASK, 0);
|
|
} else {
|
|
scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO;
|
|
mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK|
|
|
SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK;
|
|
}
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
|
|
|
|
/* Power down SPDIF module only if tx&rx are both inactive */
|
|
if (!snd_soc_dai_active(cpu_dai)) {
|
|
spdif_intr_status_clear(spdif_priv);
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR,
|
|
SCR_LOW_POWER, SCR_LOW_POWER);
|
|
}
|
|
}
|
|
|
|
static int spdif_reparent_rootclk(struct fsl_spdif_priv *spdif_priv, unsigned int sample_rate)
|
|
{
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
/* Reparent clock if required condition is true */
|
|
if (!fsl_spdif_can_set_clk_rate(spdif_priv, STC_TXCLK_SPDIF_ROOT))
|
|
return 0;
|
|
|
|
/* Get root clock */
|
|
clk = spdif_priv->txclk[STC_TXCLK_SPDIF_ROOT];
|
|
|
|
/* Disable clock first, for it was enabled by pm_runtime */
|
|
clk_disable_unprepare(clk);
|
|
fsl_asoc_reparent_pll_clocks(&pdev->dev, clk, spdif_priv->pll8k_clk,
|
|
spdif_priv->pll11k_clk, sample_rate);
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
static int fsl_spdif_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u32 sample_rate = params_rate(params);
|
|
int ret = 0;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
ret = spdif_reparent_rootclk(spdif_priv, sample_rate);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "%s: reparent root clk failed: %d\n",
|
|
__func__, sample_rate);
|
|
return ret;
|
|
}
|
|
|
|
ret = spdif_set_sample_rate(substream, sample_rate);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "%s: set sample rate failed: %d\n",
|
|
__func__, sample_rate);
|
|
return ret;
|
|
}
|
|
spdif_set_cstatus(ctrl, IEC958_AES3_CON_CLOCK,
|
|
IEC958_AES3_CON_CLOCK_1000PPM);
|
|
spdif_write_channel_status(spdif_priv);
|
|
} else {
|
|
/* Setup rx clock source */
|
|
ret = spdif_set_rx_clksrc(spdif_priv, SPDIF_DEFAULT_GAINSEL, 1);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fsl_spdif_trigger(struct snd_pcm_substream *substream,
|
|
int cmd, struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
u32 intr = SIE_INTR_FOR(tx);
|
|
u32 dmaen = SCR_DMA_xX_EN(tx);
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
regmap_update_bits(regmap, REG_SPDIF_SIE, intr, intr);
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, dmaen);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, 0);
|
|
regmap_update_bits(regmap, REG_SPDIF_SIE, intr, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops fsl_spdif_dai_ops = {
|
|
.startup = fsl_spdif_startup,
|
|
.hw_params = fsl_spdif_hw_params,
|
|
.trigger = fsl_spdif_trigger,
|
|
.shutdown = fsl_spdif_shutdown,
|
|
};
|
|
|
|
|
|
/*
|
|
* FSL SPDIF IEC958 controller(mixer) functions
|
|
*
|
|
* Channel status get/put control
|
|
* User bit value get/put control
|
|
* Valid bit value get control
|
|
* DPLL lock status get control
|
|
* User bit sync mode selection control
|
|
*/
|
|
|
|
static int fsl_spdif_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
|
|
uinfo->count = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_pb_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
|
|
uvalue->value.iec958.status[0] = ctrl->ch_status[0];
|
|
uvalue->value.iec958.status[1] = ctrl->ch_status[1];
|
|
uvalue->value.iec958.status[2] = ctrl->ch_status[2];
|
|
uvalue->value.iec958.status[3] = ctrl->ch_status[3];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_pb_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
|
|
ctrl->ch_status[0] = uvalue->value.iec958.status[0];
|
|
ctrl->ch_status[1] = uvalue->value.iec958.status[1];
|
|
ctrl->ch_status[2] = uvalue->value.iec958.status[2];
|
|
ctrl->ch_status[3] = uvalue->value.iec958.status[3];
|
|
|
|
spdif_write_channel_status(spdif_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Get channel status from SPDIF_RX_CCHAN register */
|
|
static int fsl_spdif_capture_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 cstatus, val;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SIS, &val);
|
|
if (!(val & INT_CNEW))
|
|
return -EAGAIN;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SRCSH, &cstatus);
|
|
ucontrol->value.iec958.status[0] = (cstatus >> 16) & 0xFF;
|
|
ucontrol->value.iec958.status[1] = (cstatus >> 8) & 0xFF;
|
|
ucontrol->value.iec958.status[2] = cstatus & 0xFF;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SRCSL, &cstatus);
|
|
ucontrol->value.iec958.status[3] = (cstatus >> 16) & 0xFF;
|
|
ucontrol->value.iec958.status[4] = (cstatus >> 8) & 0xFF;
|
|
ucontrol->value.iec958.status[5] = cstatus & 0xFF;
|
|
|
|
/* Clear intr */
|
|
regmap_write(regmap, REG_SPDIF_SIC, INT_CNEW);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get User bits (subcode) from chip value which readed out
|
|
* in UChannel register.
|
|
*/
|
|
static int fsl_spdif_subcode_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
unsigned long flags;
|
|
int ret = -EAGAIN;
|
|
|
|
spin_lock_irqsave(&ctrl->ctl_lock, flags);
|
|
if (ctrl->ready_buf) {
|
|
int idx = (ctrl->ready_buf - 1) * SPDIF_UBITS_SIZE;
|
|
memcpy(&ucontrol->value.iec958.subcode[0],
|
|
&ctrl->subcode[idx], SPDIF_UBITS_SIZE);
|
|
ret = 0;
|
|
}
|
|
spin_unlock_irqrestore(&ctrl->ctl_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Q-subcode information. The byte size is SPDIF_UBITS_SIZE/8 */
|
|
static int fsl_spdif_qinfo(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
|
|
uinfo->count = SPDIF_QSUB_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Get Q subcode from chip value which readed out in QChannel register */
|
|
static int fsl_spdif_qget(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
|
|
unsigned long flags;
|
|
int ret = -EAGAIN;
|
|
|
|
spin_lock_irqsave(&ctrl->ctl_lock, flags);
|
|
if (ctrl->ready_buf) {
|
|
int idx = (ctrl->ready_buf - 1) * SPDIF_QSUB_SIZE;
|
|
memcpy(&ucontrol->value.bytes.data[0],
|
|
&ctrl->qsub[idx], SPDIF_QSUB_SIZE);
|
|
ret = 0;
|
|
}
|
|
spin_unlock_irqrestore(&ctrl->ctl_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Get valid good bit from interrupt status register */
|
|
static int fsl_spdif_rx_vbit_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SIS, &val);
|
|
ucontrol->value.integer.value[0] = (val & INT_VAL_NOGOOD) != 0;
|
|
regmap_write(regmap, REG_SPDIF_SIC, INT_VAL_NOGOOD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_tx_vbit_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SCR, &val);
|
|
val = (val & SCR_VAL_MASK) >> SCR_VAL_OFFSET;
|
|
val = 1 - val;
|
|
ucontrol->value.integer.value[0] = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_tx_vbit_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val = (1 - ucontrol->value.integer.value[0]) << SCR_VAL_OFFSET;
|
|
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_VAL_MASK, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_rx_rcm_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SCR, &val);
|
|
val = (val & SCR_RAW_CAPTURE_MODE) ? 1 : 0;
|
|
ucontrol->value.integer.value[0] = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_rx_rcm_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val = (ucontrol->value.integer.value[0] ? SCR_RAW_CAPTURE_MODE : 0);
|
|
|
|
if (val)
|
|
cpu_dai->driver->capture.formats |= SNDRV_PCM_FMTBIT_S32_LE;
|
|
else
|
|
cpu_dai->driver->capture.formats &= ~SNDRV_PCM_FMTBIT_S32_LE;
|
|
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_RAW_CAPTURE_MODE, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_bypass_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
ucontrol->value.integer.value[0] = priv->bypass ? 1 : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_bypass_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *priv = snd_soc_dai_get_drvdata(dai);
|
|
struct snd_soc_card *card = dai->component->card;
|
|
bool set = (ucontrol->value.integer.value[0] != 0);
|
|
struct regmap *regmap = priv->regmap;
|
|
struct snd_soc_pcm_runtime *rtd;
|
|
u32 scr, mask;
|
|
int stream;
|
|
|
|
rtd = snd_soc_get_pcm_runtime(card, card->dai_link);
|
|
|
|
if (priv->bypass == set)
|
|
return 0; /* nothing to do */
|
|
|
|
if (snd_soc_dai_active(dai)) {
|
|
dev_err(dai->dev, "Cannot change BYPASS mode while stream is running.\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
pm_runtime_get_sync(dai->dev);
|
|
|
|
if (set) {
|
|
/* Disable interrupts */
|
|
regmap_update_bits(regmap, REG_SPDIF_SIE, 0xffffff, 0);
|
|
|
|
/* Configure BYPASS mode */
|
|
scr = SCR_TXSEL_RX | SCR_RXFIFO_OFF;
|
|
mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK |
|
|
SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK | SCR_TXSEL_MASK;
|
|
/* Power up SPDIF module */
|
|
mask |= SCR_LOW_POWER;
|
|
} else {
|
|
/* Power down SPDIF module, disable TX */
|
|
scr = SCR_LOW_POWER | SCR_TXSEL_OFF;
|
|
mask = SCR_LOW_POWER | SCR_TXSEL_MASK;
|
|
}
|
|
|
|
regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
|
|
|
|
/* Disable playback & capture if BYPASS mode is enabled, enable otherwise */
|
|
for_each_pcm_streams(stream)
|
|
rtd->pcm->streams[stream].substream_count = (set ? 0 : 1);
|
|
|
|
priv->bypass = set;
|
|
pm_runtime_put_sync(dai->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* DPLL lock information */
|
|
static int fsl_spdif_rxrate_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 16000;
|
|
uinfo->value.integer.max = 192000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 gainsel_multi[GAINSEL_MULTI_MAX] = {
|
|
24, 16, 12, 8, 6, 4, 3,
|
|
};
|
|
|
|
/* Get RX data clock rate given the SPDIF bus_clk */
|
|
static int spdif_get_rxclk_rate(struct fsl_spdif_priv *spdif_priv,
|
|
enum spdif_gainsel gainsel)
|
|
{
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
u64 tmpval64, busclk_freq = 0;
|
|
u32 freqmeas, phaseconf;
|
|
u8 clksrc;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SRFM, &freqmeas);
|
|
regmap_read(regmap, REG_SPDIF_SRPC, &phaseconf);
|
|
|
|
clksrc = (phaseconf >> SRPC_CLKSRC_SEL_OFFSET) & 0xf;
|
|
|
|
/* Get bus clock from system */
|
|
if (srpc_dpll_locked[clksrc] && (phaseconf & SRPC_DPLL_LOCKED))
|
|
busclk_freq = clk_get_rate(spdif_priv->sysclk);
|
|
|
|
/* FreqMeas_CLK = (BUS_CLK * FreqMeas) / 2 ^ 10 / GAINSEL / 128 */
|
|
tmpval64 = (u64) busclk_freq * freqmeas;
|
|
do_div(tmpval64, gainsel_multi[gainsel] * 1024);
|
|
do_div(tmpval64, 128 * 1024);
|
|
|
|
dev_dbg(&pdev->dev, "FreqMeas: %d\n", freqmeas);
|
|
dev_dbg(&pdev->dev, "BusclkFreq: %lld\n", busclk_freq);
|
|
dev_dbg(&pdev->dev, "RxRate: %lld\n", tmpval64);
|
|
|
|
return (int)tmpval64;
|
|
}
|
|
|
|
/*
|
|
* Get DPLL lock or not info from stable interrupt status register.
|
|
* User application must use this control to get locked,
|
|
* then can do next PCM operation
|
|
*/
|
|
static int fsl_spdif_rxrate_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
int rate = 0;
|
|
|
|
if (spdif_priv->dpll_locked)
|
|
rate = spdif_get_rxclk_rate(spdif_priv, SPDIF_DEFAULT_GAINSEL);
|
|
|
|
ucontrol->value.integer.value[0] = rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* User bit sync mode:
|
|
* 1 CD User channel subcode
|
|
* 0 Non-CD data
|
|
*/
|
|
static int fsl_spdif_usync_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val;
|
|
|
|
regmap_read(regmap, REG_SPDIF_SRCD, &val);
|
|
ucontrol->value.integer.value[0] = (val & SRCD_CD_USER) != 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* User bit sync mode:
|
|
* 1 CD User channel subcode
|
|
* 0 Non-CD data
|
|
*/
|
|
static int fsl_spdif_usync_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
|
|
struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct regmap *regmap = spdif_priv->regmap;
|
|
u32 val = ucontrol->value.integer.value[0] << SRCD_CD_USER_OFFSET;
|
|
|
|
regmap_update_bits(regmap, REG_SPDIF_SRCD, SRCD_CD_USER, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* FSL SPDIF IEC958 controller defines */
|
|
static struct snd_kcontrol_new fsl_spdif_ctrls[] = {
|
|
/* Status cchanel controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_WRITE |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = fsl_spdif_info,
|
|
.get = fsl_spdif_pb_get,
|
|
.put = fsl_spdif_pb_put,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = fsl_spdif_info,
|
|
.get = fsl_spdif_capture_get,
|
|
},
|
|
/* User bits controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 Subcode Capture Default",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = fsl_spdif_info,
|
|
.get = fsl_spdif_subcode_get,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 Q-subcode Capture Default",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = fsl_spdif_qinfo,
|
|
.get = fsl_spdif_qget,
|
|
},
|
|
/* Valid bit error controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 RX V-Bit Errors",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = snd_ctl_boolean_mono_info,
|
|
.get = fsl_spdif_rx_vbit_get,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 TX V-Bit",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_WRITE |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = snd_ctl_boolean_mono_info,
|
|
.get = fsl_spdif_tx_vbit_get,
|
|
.put = fsl_spdif_tx_vbit_put,
|
|
},
|
|
/* DPLL lock info get controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "RX Sample Rate",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = fsl_spdif_rxrate_info,
|
|
.get = fsl_spdif_rxrate_get,
|
|
},
|
|
/* RX bypass controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "Bypass Mode",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = snd_ctl_boolean_mono_info,
|
|
.get = fsl_spdif_bypass_get,
|
|
.put = fsl_spdif_bypass_put,
|
|
},
|
|
/* User bit sync mode set/get controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 USyncMode CDText",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_WRITE |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = snd_ctl_boolean_mono_info,
|
|
.get = fsl_spdif_usync_get,
|
|
.put = fsl_spdif_usync_put,
|
|
},
|
|
};
|
|
|
|
static struct snd_kcontrol_new fsl_spdif_ctrls_rcm[] = {
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 Raw Capture Mode",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_WRITE |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = snd_ctl_boolean_mono_info,
|
|
.get = fsl_spdif_rx_rcm_get,
|
|
.put = fsl_spdif_rx_rcm_put,
|
|
},
|
|
};
|
|
|
|
static int fsl_spdif_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct fsl_spdif_priv *spdif_private = snd_soc_dai_get_drvdata(dai);
|
|
|
|
snd_soc_dai_init_dma_data(dai, &spdif_private->dma_params_tx,
|
|
&spdif_private->dma_params_rx);
|
|
|
|
snd_soc_add_dai_controls(dai, fsl_spdif_ctrls, ARRAY_SIZE(fsl_spdif_ctrls));
|
|
|
|
if (spdif_private->soc->raw_capture_mode)
|
|
snd_soc_add_dai_controls(dai, fsl_spdif_ctrls_rcm,
|
|
ARRAY_SIZE(fsl_spdif_ctrls_rcm));
|
|
|
|
/*Clear the val bit for Tx*/
|
|
regmap_update_bits(spdif_private->regmap, REG_SPDIF_SCR,
|
|
SCR_VAL_MASK, SCR_VAL_CLEAR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver fsl_spdif_dai = {
|
|
.probe = &fsl_spdif_dai_probe,
|
|
.playback = {
|
|
.stream_name = "CPU-Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = FSL_SPDIF_RATES_PLAYBACK,
|
|
.formats = FSL_SPDIF_FORMATS_PLAYBACK,
|
|
},
|
|
.capture = {
|
|
.stream_name = "CPU-Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = FSL_SPDIF_RATES_CAPTURE,
|
|
.formats = FSL_SPDIF_FORMATS_CAPTURE,
|
|
},
|
|
.ops = &fsl_spdif_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver fsl_spdif_component = {
|
|
.name = "fsl-spdif",
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
/* FSL SPDIF REGMAP */
|
|
static const struct reg_default fsl_spdif_reg_defaults[] = {
|
|
{REG_SPDIF_SCR, 0x00000400},
|
|
{REG_SPDIF_SRCD, 0x00000000},
|
|
{REG_SPDIF_SIE, 0x00000000},
|
|
{REG_SPDIF_STL, 0x00000000},
|
|
{REG_SPDIF_STR, 0x00000000},
|
|
{REG_SPDIF_STCSCH, 0x00000000},
|
|
{REG_SPDIF_STCSCL, 0x00000000},
|
|
{REG_SPDIF_STCSPH, 0x00000000},
|
|
{REG_SPDIF_STCSPL, 0x00000000},
|
|
{REG_SPDIF_STC, 0x00020f00},
|
|
};
|
|
|
|
static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SPDIF_SCR:
|
|
case REG_SPDIF_SRCD:
|
|
case REG_SPDIF_SRPC:
|
|
case REG_SPDIF_SIE:
|
|
case REG_SPDIF_SIS:
|
|
case REG_SPDIF_SRL:
|
|
case REG_SPDIF_SRR:
|
|
case REG_SPDIF_SRCSH:
|
|
case REG_SPDIF_SRCSL:
|
|
case REG_SPDIF_SRU:
|
|
case REG_SPDIF_SRQ:
|
|
case REG_SPDIF_STCSCH:
|
|
case REG_SPDIF_STCSCL:
|
|
case REG_SPDIF_STCSPH:
|
|
case REG_SPDIF_STCSPL:
|
|
case REG_SPDIF_SRFM:
|
|
case REG_SPDIF_STC:
|
|
case REG_SPDIF_SRCCA_31_0:
|
|
case REG_SPDIF_SRCCA_63_32:
|
|
case REG_SPDIF_SRCCA_95_64:
|
|
case REG_SPDIF_SRCCA_127_96:
|
|
case REG_SPDIF_SRCCA_159_128:
|
|
case REG_SPDIF_SRCCA_191_160:
|
|
case REG_SPDIF_STCCA_31_0:
|
|
case REG_SPDIF_STCCA_63_32:
|
|
case REG_SPDIF_STCCA_95_64:
|
|
case REG_SPDIF_STCCA_127_96:
|
|
case REG_SPDIF_STCCA_159_128:
|
|
case REG_SPDIF_STCCA_191_160:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool fsl_spdif_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SPDIF_SRPC:
|
|
case REG_SPDIF_SIS:
|
|
case REG_SPDIF_SRL:
|
|
case REG_SPDIF_SRR:
|
|
case REG_SPDIF_SRCSH:
|
|
case REG_SPDIF_SRCSL:
|
|
case REG_SPDIF_SRU:
|
|
case REG_SPDIF_SRQ:
|
|
case REG_SPDIF_SRFM:
|
|
case REG_SPDIF_SRCCA_31_0:
|
|
case REG_SPDIF_SRCCA_63_32:
|
|
case REG_SPDIF_SRCCA_95_64:
|
|
case REG_SPDIF_SRCCA_127_96:
|
|
case REG_SPDIF_SRCCA_159_128:
|
|
case REG_SPDIF_SRCCA_191_160:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case REG_SPDIF_SCR:
|
|
case REG_SPDIF_SRCD:
|
|
case REG_SPDIF_SRPC:
|
|
case REG_SPDIF_SIE:
|
|
case REG_SPDIF_SIC:
|
|
case REG_SPDIF_STL:
|
|
case REG_SPDIF_STR:
|
|
case REG_SPDIF_STCSCH:
|
|
case REG_SPDIF_STCSCL:
|
|
case REG_SPDIF_STCSPH:
|
|
case REG_SPDIF_STCSPL:
|
|
case REG_SPDIF_STC:
|
|
case REG_SPDIF_STCCA_31_0:
|
|
case REG_SPDIF_STCCA_63_32:
|
|
case REG_SPDIF_STCCA_95_64:
|
|
case REG_SPDIF_STCCA_127_96:
|
|
case REG_SPDIF_STCCA_159_128:
|
|
case REG_SPDIF_STCCA_191_160:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config fsl_spdif_regmap_config = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
|
|
.max_register = REG_SPDIF_STCCA_191_160,
|
|
.reg_defaults = fsl_spdif_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(fsl_spdif_reg_defaults),
|
|
.readable_reg = fsl_spdif_readable_reg,
|
|
.volatile_reg = fsl_spdif_volatile_reg,
|
|
.writeable_reg = fsl_spdif_writeable_reg,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv,
|
|
struct clk *clk, u64 savesub,
|
|
enum spdif_txrate index, bool round)
|
|
{
|
|
static const u32 rate[] = { 32000, 44100, 48000, 88200, 96000, 176400,
|
|
192000, };
|
|
bool is_sysclk = clk_is_match(clk, spdif_priv->sysclk);
|
|
u64 rate_ideal, rate_actual, sub;
|
|
u32 arate;
|
|
u16 sysclk_dfmin, sysclk_dfmax, sysclk_df;
|
|
u8 txclk_df;
|
|
|
|
/* The sysclk has an extra divisor [2, 512] */
|
|
sysclk_dfmin = is_sysclk ? 2 : 1;
|
|
sysclk_dfmax = is_sysclk ? 512 : 1;
|
|
|
|
for (sysclk_df = sysclk_dfmin; sysclk_df <= sysclk_dfmax; sysclk_df++) {
|
|
for (txclk_df = 1; txclk_df <= 128; txclk_df++) {
|
|
rate_ideal = rate[index] * txclk_df * 64ULL;
|
|
if (round)
|
|
rate_actual = clk_round_rate(clk, rate_ideal);
|
|
else
|
|
rate_actual = clk_get_rate(clk);
|
|
|
|
arate = rate_actual / 64;
|
|
arate /= txclk_df * sysclk_df;
|
|
|
|
if (arate == rate[index]) {
|
|
/* We are lucky */
|
|
savesub = 0;
|
|
spdif_priv->txclk_df[index] = txclk_df;
|
|
spdif_priv->sysclk_df[index] = sysclk_df;
|
|
spdif_priv->txrate[index] = arate;
|
|
goto out;
|
|
} else if (arate / rate[index] == 1) {
|
|
/* A little bigger than expect */
|
|
sub = (u64)(arate - rate[index]) * 100000;
|
|
do_div(sub, rate[index]);
|
|
if (sub >= savesub)
|
|
continue;
|
|
savesub = sub;
|
|
spdif_priv->txclk_df[index] = txclk_df;
|
|
spdif_priv->sysclk_df[index] = sysclk_df;
|
|
spdif_priv->txrate[index] = arate;
|
|
} else if (rate[index] / arate == 1) {
|
|
/* A little smaller than expect */
|
|
sub = (u64)(rate[index] - arate) * 100000;
|
|
do_div(sub, rate[index]);
|
|
if (sub >= savesub)
|
|
continue;
|
|
savesub = sub;
|
|
spdif_priv->txclk_df[index] = txclk_df;
|
|
spdif_priv->sysclk_df[index] = sysclk_df;
|
|
spdif_priv->txrate[index] = arate;
|
|
}
|
|
}
|
|
}
|
|
|
|
out:
|
|
return savesub;
|
|
}
|
|
|
|
static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv,
|
|
enum spdif_txrate index)
|
|
{
|
|
static const u32 rate[] = { 32000, 44100, 48000, 88200, 96000, 176400,
|
|
192000, };
|
|
struct platform_device *pdev = spdif_priv->pdev;
|
|
struct device *dev = &pdev->dev;
|
|
u64 savesub = 100000, ret;
|
|
struct clk *clk;
|
|
int i;
|
|
|
|
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) {
|
|
clk = spdif_priv->txclk[i];
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "no rxtx%d clock in devicetree\n", i);
|
|
return PTR_ERR(clk);
|
|
}
|
|
if (!clk_get_rate(clk))
|
|
continue;
|
|
|
|
ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index,
|
|
fsl_spdif_can_set_clk_rate(spdif_priv, i));
|
|
if (savesub == ret)
|
|
continue;
|
|
|
|
savesub = ret;
|
|
spdif_priv->txclk_src[index] = i;
|
|
|
|
/* To quick catch a divisor, we allow a 0.1% deviation */
|
|
if (savesub < 100)
|
|
break;
|
|
}
|
|
|
|
dev_dbg(dev, "use rxtx%d as tx clock source for %dHz sample rate\n",
|
|
spdif_priv->txclk_src[index], rate[index]);
|
|
dev_dbg(dev, "use txclk df %d for %dHz sample rate\n",
|
|
spdif_priv->txclk_df[index], rate[index]);
|
|
if (clk_is_match(spdif_priv->txclk[spdif_priv->txclk_src[index]], spdif_priv->sysclk))
|
|
dev_dbg(dev, "use sysclk df %d for %dHz sample rate\n",
|
|
spdif_priv->sysclk_df[index], rate[index]);
|
|
dev_dbg(dev, "the best rate for %dHz sample rate is %dHz\n",
|
|
rate[index], spdif_priv->txrate[index]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_probe(struct platform_device *pdev)
|
|
{
|
|
struct fsl_spdif_priv *spdif_priv;
|
|
struct spdif_mixer_control *ctrl;
|
|
struct resource *res;
|
|
void __iomem *regs;
|
|
int irq, ret, i;
|
|
char tmp[16];
|
|
|
|
spdif_priv = devm_kzalloc(&pdev->dev, sizeof(*spdif_priv), GFP_KERNEL);
|
|
if (!spdif_priv)
|
|
return -ENOMEM;
|
|
|
|
spdif_priv->pdev = pdev;
|
|
|
|
spdif_priv->soc = of_device_get_match_data(&pdev->dev);
|
|
|
|
/* Initialize this copy of the CPU DAI driver structure */
|
|
memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
|
|
spdif_priv->cpu_dai_drv.name = dev_name(&pdev->dev);
|
|
spdif_priv->cpu_dai_drv.playback.formats =
|
|
spdif_priv->soc->tx_formats;
|
|
|
|
/* Get the addresses and IRQ */
|
|
regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
spdif_priv->regmap = devm_regmap_init_mmio(&pdev->dev, regs, &fsl_spdif_regmap_config);
|
|
if (IS_ERR(spdif_priv->regmap)) {
|
|
dev_err(&pdev->dev, "regmap init failed\n");
|
|
return PTR_ERR(spdif_priv->regmap);
|
|
}
|
|
|
|
for (i = 0; i < spdif_priv->soc->interrupts; i++) {
|
|
irq = platform_get_irq(pdev, i);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, spdif_isr, 0,
|
|
dev_name(&pdev->dev), spdif_priv);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not claim irq %u\n", irq);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) {
|
|
sprintf(tmp, "rxtx%d", i);
|
|
spdif_priv->txclk[i] = devm_clk_get(&pdev->dev, tmp);
|
|
if (IS_ERR(spdif_priv->txclk[i])) {
|
|
dev_err(&pdev->dev, "no rxtx%d clock in devicetree\n", i);
|
|
return PTR_ERR(spdif_priv->txclk[i]);
|
|
}
|
|
}
|
|
|
|
/* Get system clock for rx clock rate calculation */
|
|
spdif_priv->sysclk = spdif_priv->txclk[5];
|
|
if (IS_ERR(spdif_priv->sysclk)) {
|
|
dev_err(&pdev->dev, "no sys clock (rxtx5) in devicetree\n");
|
|
return PTR_ERR(spdif_priv->sysclk);
|
|
}
|
|
|
|
/* Get core clock for data register access via DMA */
|
|
spdif_priv->coreclk = devm_clk_get(&pdev->dev, "core");
|
|
if (IS_ERR(spdif_priv->coreclk)) {
|
|
dev_err(&pdev->dev, "no core clock in devicetree\n");
|
|
return PTR_ERR(spdif_priv->coreclk);
|
|
}
|
|
|
|
spdif_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
|
|
if (IS_ERR(spdif_priv->spbaclk))
|
|
dev_warn(&pdev->dev, "no spba clock in devicetree\n");
|
|
|
|
/* Select clock source for rx/tx clock */
|
|
spdif_priv->rxclk = spdif_priv->txclk[1];
|
|
if (IS_ERR(spdif_priv->rxclk)) {
|
|
dev_err(&pdev->dev, "no rxtx1 clock in devicetree\n");
|
|
return PTR_ERR(spdif_priv->rxclk);
|
|
}
|
|
spdif_priv->rxclk_src = DEFAULT_RXCLK_SRC;
|
|
|
|
fsl_asoc_get_pll_clocks(&pdev->dev, &spdif_priv->pll8k_clk,
|
|
&spdif_priv->pll11k_clk);
|
|
|
|
/* Initial spinlock for control data */
|
|
ctrl = &spdif_priv->fsl_spdif_control;
|
|
spin_lock_init(&ctrl->ctl_lock);
|
|
|
|
/* Init tx channel status default value */
|
|
ctrl->ch_status[0] = IEC958_AES0_CON_NOT_COPYRIGHT |
|
|
IEC958_AES0_CON_EMPHASIS_5015;
|
|
ctrl->ch_status[1] = IEC958_AES1_CON_DIGDIGCONV_ID;
|
|
ctrl->ch_status[2] = 0x00;
|
|
ctrl->ch_status[3] = IEC958_AES3_CON_FS_44100 |
|
|
IEC958_AES3_CON_CLOCK_1000PPM;
|
|
|
|
spdif_priv->dpll_locked = false;
|
|
|
|
spdif_priv->dma_params_tx.maxburst = spdif_priv->soc->tx_burst;
|
|
spdif_priv->dma_params_rx.maxburst = spdif_priv->soc->rx_burst;
|
|
spdif_priv->dma_params_tx.addr = res->start + REG_SPDIF_STL;
|
|
spdif_priv->dma_params_rx.addr = res->start + REG_SPDIF_SRL;
|
|
|
|
/* Register with ASoC */
|
|
dev_set_drvdata(&pdev->dev, spdif_priv);
|
|
pm_runtime_enable(&pdev->dev);
|
|
regcache_cache_only(spdif_priv->regmap, true);
|
|
|
|
/*
|
|
* Register platform component before registering cpu dai for there
|
|
* is not defer probe for platform component in snd_soc_add_pcm_runtime().
|
|
*/
|
|
ret = imx_pcm_dma_init(pdev);
|
|
if (ret) {
|
|
dev_err_probe(&pdev->dev, ret, "imx_pcm_dma_init failed\n");
|
|
goto err_pm_disable;
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(&pdev->dev, &fsl_spdif_component,
|
|
&spdif_priv->cpu_dai_drv, 1);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
|
|
goto err_pm_disable;
|
|
}
|
|
|
|
return ret;
|
|
|
|
err_pm_disable:
|
|
pm_runtime_disable(&pdev->dev);
|
|
return ret;
|
|
}
|
|
|
|
static int fsl_spdif_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int fsl_spdif_runtime_suspend(struct device *dev)
|
|
{
|
|
struct fsl_spdif_priv *spdif_priv = dev_get_drvdata(dev);
|
|
int i;
|
|
|
|
/* Disable all the interrupts */
|
|
regmap_update_bits(spdif_priv->regmap, REG_SPDIF_SIE, 0xffffff, 0);
|
|
|
|
regmap_read(spdif_priv->regmap, REG_SPDIF_SRPC,
|
|
&spdif_priv->regcache_srpc);
|
|
regcache_cache_only(spdif_priv->regmap, true);
|
|
|
|
for (i = 0; i < STC_TXCLK_SRC_MAX; i++)
|
|
clk_disable_unprepare(spdif_priv->txclk[i]);
|
|
|
|
if (!IS_ERR(spdif_priv->spbaclk))
|
|
clk_disable_unprepare(spdif_priv->spbaclk);
|
|
clk_disable_unprepare(spdif_priv->coreclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spdif_runtime_resume(struct device *dev)
|
|
{
|
|
struct fsl_spdif_priv *spdif_priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
int i;
|
|
|
|
ret = clk_prepare_enable(spdif_priv->coreclk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable core clock\n");
|
|
return ret;
|
|
}
|
|
|
|
if (!IS_ERR(spdif_priv->spbaclk)) {
|
|
ret = clk_prepare_enable(spdif_priv->spbaclk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable spba clock\n");
|
|
goto disable_core_clk;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) {
|
|
ret = clk_prepare_enable(spdif_priv->txclk[i]);
|
|
if (ret)
|
|
goto disable_tx_clk;
|
|
}
|
|
|
|
regcache_cache_only(spdif_priv->regmap, false);
|
|
regcache_mark_dirty(spdif_priv->regmap);
|
|
|
|
regmap_update_bits(spdif_priv->regmap, REG_SPDIF_SRPC,
|
|
SRPC_CLKSRC_SEL_MASK | SRPC_GAINSEL_MASK,
|
|
spdif_priv->regcache_srpc);
|
|
|
|
ret = regcache_sync(spdif_priv->regmap);
|
|
if (ret)
|
|
goto disable_tx_clk;
|
|
|
|
return 0;
|
|
|
|
disable_tx_clk:
|
|
for (i--; i >= 0; i--)
|
|
clk_disable_unprepare(spdif_priv->txclk[i]);
|
|
if (!IS_ERR(spdif_priv->spbaclk))
|
|
clk_disable_unprepare(spdif_priv->spbaclk);
|
|
disable_core_clk:
|
|
clk_disable_unprepare(spdif_priv->coreclk);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops fsl_spdif_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
SET_RUNTIME_PM_OPS(fsl_spdif_runtime_suspend, fsl_spdif_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static const struct of_device_id fsl_spdif_dt_ids[] = {
|
|
{ .compatible = "fsl,imx35-spdif", .data = &fsl_spdif_imx35, },
|
|
{ .compatible = "fsl,vf610-spdif", .data = &fsl_spdif_vf610, },
|
|
{ .compatible = "fsl,imx6sx-spdif", .data = &fsl_spdif_imx6sx, },
|
|
{ .compatible = "fsl,imx8qm-spdif", .data = &fsl_spdif_imx8qm, },
|
|
{ .compatible = "fsl,imx8mm-spdif", .data = &fsl_spdif_imx8mm, },
|
|
{ .compatible = "fsl,imx8ulp-spdif", .data = &fsl_spdif_imx8ulp, },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids);
|
|
|
|
static struct platform_driver fsl_spdif_driver = {
|
|
.driver = {
|
|
.name = "fsl-spdif-dai",
|
|
.of_match_table = fsl_spdif_dt_ids,
|
|
.pm = &fsl_spdif_pm,
|
|
},
|
|
.probe = fsl_spdif_probe,
|
|
.remove = fsl_spdif_remove,
|
|
};
|
|
|
|
module_platform_driver(fsl_spdif_driver);
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
|
|
MODULE_DESCRIPTION("Freescale S/PDIF CPU DAI Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:fsl-spdif-dai");
|