Ulf Hansson 892bf10014 mmc: core: Fixup support for HW busy detection for HPI commands ... In case the host specify a max_busy_timeout, we need to validate that the needed timeout for the HPI command conforms to that requirement. If that's not the case, let's convert from a R1B response to a R1 response, as to instruct the host to avoid HW busy detection. Additionally, when R1B is used we must also inform the host about the busy timeout for the command, so let's do that via updating cmd.busy_timeout. Finally, when R1B is used and in case the host supports HW busy detection, there should be no need for doing polling, so then skip that. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-12-ulf.hansson@linaro.org		2020-03-24 14:35:40 +01:00
..
block.c	mmc: core: Enable re-use of mmc_blk_in_tran_state()	2020-03-24 14:35:39 +01:00
block.h	mmc: block: Remove code no longer needed after the switch to blk-mq	2017-12-11 13:02:22 +01:00
bus.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
bus.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
card.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194	2019-05-30 11:29:22 -07:00
core.c	mmc: core: Convert to mmc_poll_for_busy() for erase/trim/discard	2020-03-24 14:35:40 +01:00
core.h	mmc: core: Re-work HW reset for SDIO cards	2019-11-14 16:28:56 +01:00
debugfs.c	MMC core:	2019-07-11 18:11:21 -07:00
host.c	mmc: core: Remove mmc_gpiod_request_*(invert_gpio)	2019-12-18 13:37:07 +01:00
host.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
Kconfig	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
Makefile	mmc: core: Move regulator helpers to separate file	2019-02-25 15:20:58 +01:00
mmc_ops.c	mmc: core: Fixup support for HW busy detection for HPI commands	2020-03-24 14:35:40 +01:00
mmc_ops.h	mmc: core: Convert to mmc_poll_for_busy() for HPI commands	2020-03-24 14:35:40 +01:00
mmc_test.c	mmc: core: no need to check return value of debugfs_create functions	2019-06-17 13:30:49 +02:00
mmc.c	mmc: core: Drop redundant in-parameter to __mmc_switch()	2020-03-24 14:35:39 +01:00
pwrseq_emmc.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194	2019-05-30 11:29:22 -07:00
pwrseq_sd8787.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157	2019-05-30 11:26:37 -07:00
pwrseq_simple.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194	2019-05-30 11:29:22 -07:00
pwrseq.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194	2019-05-30 11:29:22 -07:00
pwrseq.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194	2019-05-30 11:29:22 -07:00
queue.c	mmc: Add MMC host software queue support	2020-03-24 14:35:39 +01:00
queue.h	mmc: stop abusing the request queue_lock pointer	2018-11-17 07:20:45 -07:00
quirks.h	mmc: core: fix wl1251 sdio quirks	2019-11-15 09:59:19 +01:00
regulator.c	mmc: core: Convert mmc_regulator_get_ocrmask() to static	2019-02-25 15:20:58 +01:00
sd_ops.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sd_ops.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sd.c	mmc: core: Enable the MMC host software queue for the SD card	2020-03-24 14:35:39 +01:00
sd.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
sdio_bus.c	mmc: core: Re-work HW reset for SDIO cards	2019-11-14 16:28:56 +01:00
sdio_bus.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sdio_cis.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sdio_cis.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sdio_io.c	mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()	2019-06-18 13:30:32 +02:00
sdio_irq.c	mmc: core: Fixup processing of SDIO IRQs during system suspend/resume	2019-09-11 16:10:19 +02:00
sdio_ops.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sdio_ops.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sdio_uart.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152	2019-05-30 11:26:32 -07:00
sdio.c	mmc: core: Re-work HW reset for SDIO cards	2019-11-14 16:28:56 +01:00
slot-gpio.c	mmc: core: Remove mmc_gpiod_request_*(invert_gpio)	2019-12-18 13:37:07 +01:00
slot-gpio.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194	2019-05-30 11:29:22 -07:00