mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
8ddad55899
Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.
Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.
iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.
The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)
Fixes: 72f5801a4e
("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
742 lines
20 KiB
C
742 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* drivers/dma/fsl-edma.c
|
|
*
|
|
* Copyright 2013-2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* Driver for the Freescale eDMA engine with flexible channel multiplexing
|
|
* capability for DMA request sources. The eDMA block can be found on some
|
|
* Vybrid and Layerscape SoCs.
|
|
*/
|
|
|
|
#include <dt-bindings/dma/fsl-edma.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pm_domain.h>
|
|
#include <linux/property.h>
|
|
|
|
#include "fsl-edma-common.h"
|
|
|
|
static void fsl_edma_synchronize(struct dma_chan *chan)
|
|
{
|
|
struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
|
|
|
|
vchan_synchronize(&fsl_chan->vchan);
|
|
}
|
|
|
|
static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
|
|
{
|
|
struct fsl_edma_engine *fsl_edma = dev_id;
|
|
unsigned int intr, ch;
|
|
struct edma_regs *regs = &fsl_edma->regs;
|
|
|
|
intr = edma_readl(fsl_edma, regs->intl);
|
|
if (!intr)
|
|
return IRQ_NONE;
|
|
|
|
for (ch = 0; ch < fsl_edma->n_chans; ch++) {
|
|
if (intr & (0x1 << ch)) {
|
|
edma_writeb(fsl_edma, EDMA_CINT_CINT(ch), regs->cint);
|
|
fsl_edma_tx_chan_handler(&fsl_edma->chans[ch]);
|
|
}
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t fsl_edma3_tx_handler(int irq, void *dev_id)
|
|
{
|
|
struct fsl_edma_chan *fsl_chan = dev_id;
|
|
unsigned int intr;
|
|
|
|
intr = edma_readl_chreg(fsl_chan, ch_int);
|
|
if (!intr)
|
|
return IRQ_HANDLED;
|
|
|
|
edma_writel_chreg(fsl_chan, 1, ch_int);
|
|
|
|
fsl_edma_tx_chan_handler(fsl_chan);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t fsl_edma2_tx_handler(int irq, void *devi_id)
|
|
{
|
|
struct fsl_edma_chan *fsl_chan = devi_id;
|
|
|
|
return fsl_edma_tx_handler(irq, fsl_chan->edma);
|
|
}
|
|
|
|
static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id)
|
|
{
|
|
struct fsl_edma_engine *fsl_edma = dev_id;
|
|
unsigned int err, ch;
|
|
struct edma_regs *regs = &fsl_edma->regs;
|
|
|
|
err = edma_readl(fsl_edma, regs->errl);
|
|
if (!err)
|
|
return IRQ_NONE;
|
|
|
|
for (ch = 0; ch < fsl_edma->n_chans; ch++) {
|
|
if (err & (0x1 << ch)) {
|
|
fsl_edma_disable_request(&fsl_edma->chans[ch]);
|
|
edma_writeb(fsl_edma, EDMA_CERR_CERR(ch), regs->cerr);
|
|
fsl_edma_err_chan_handler(&fsl_edma->chans[ch]);
|
|
}
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
|
|
{
|
|
if (fsl_edma_tx_handler(irq, dev_id) == IRQ_HANDLED)
|
|
return IRQ_HANDLED;
|
|
|
|
return fsl_edma_err_handler(irq, dev_id);
|
|
}
|
|
|
|
static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
|
|
struct dma_chan *chan, *_chan;
|
|
struct fsl_edma_chan *fsl_chan;
|
|
u32 dmamux_nr = fsl_edma->drvdata->dmamuxs;
|
|
unsigned long chans_per_mux = fsl_edma->n_chans / dmamux_nr;
|
|
|
|
if (dma_spec->args_count != 2)
|
|
return NULL;
|
|
|
|
guard(mutex)(&fsl_edma->fsl_edma_mutex);
|
|
|
|
list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, device_node) {
|
|
if (chan->client_count)
|
|
continue;
|
|
if ((chan->chan_id / chans_per_mux) == dma_spec->args[0]) {
|
|
chan = dma_get_slave_channel(chan);
|
|
if (chan) {
|
|
chan->device->privatecnt++;
|
|
fsl_chan = to_fsl_edma_chan(chan);
|
|
fsl_chan->srcid = dma_spec->args[1];
|
|
|
|
if (!fsl_chan->srcid) {
|
|
dev_err(&fsl_chan->pdev->dev, "Invalidate srcid %d\n",
|
|
fsl_chan->srcid);
|
|
return NULL;
|
|
}
|
|
|
|
fsl_edma_chan_mux(fsl_chan, fsl_chan->srcid,
|
|
true);
|
|
return chan;
|
|
}
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_chan *fsl_edma3_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
|
|
struct dma_chan *chan, *_chan;
|
|
struct fsl_edma_chan *fsl_chan;
|
|
bool b_chmux;
|
|
int i;
|
|
|
|
if (dma_spec->args_count != 3)
|
|
return NULL;
|
|
|
|
b_chmux = !!(fsl_edma->drvdata->flags & FSL_EDMA_DRV_HAS_CHMUX);
|
|
|
|
mutex_lock(&fsl_edma->fsl_edma_mutex);
|
|
list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels,
|
|
device_node) {
|
|
|
|
if (chan->client_count)
|
|
continue;
|
|
|
|
fsl_chan = to_fsl_edma_chan(chan);
|
|
i = fsl_chan - fsl_edma->chans;
|
|
|
|
fsl_chan->priority = dma_spec->args[1];
|
|
fsl_chan->is_rxchan = dma_spec->args[2] & FSL_EDMA_RX;
|
|
fsl_chan->is_remote = dma_spec->args[2] & FSL_EDMA_REMOTE;
|
|
fsl_chan->is_multi_fifo = dma_spec->args[2] & FSL_EDMA_MULTI_FIFO;
|
|
|
|
if ((dma_spec->args[2] & FSL_EDMA_EVEN_CH) && (i & 0x1))
|
|
continue;
|
|
|
|
if ((dma_spec->args[2] & FSL_EDMA_ODD_CH) && !(i & 0x1))
|
|
continue;
|
|
|
|
if (!b_chmux && i == dma_spec->args[0]) {
|
|
chan = dma_get_slave_channel(chan);
|
|
chan->device->privatecnt++;
|
|
mutex_unlock(&fsl_edma->fsl_edma_mutex);
|
|
return chan;
|
|
} else if (b_chmux && !fsl_chan->srcid) {
|
|
/* if controller support channel mux, choose a free channel */
|
|
chan = dma_get_slave_channel(chan);
|
|
chan->device->privatecnt++;
|
|
fsl_chan->srcid = dma_spec->args[0];
|
|
mutex_unlock(&fsl_edma->fsl_edma_mutex);
|
|
return chan;
|
|
}
|
|
}
|
|
mutex_unlock(&fsl_edma->fsl_edma_mutex);
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
|
|
{
|
|
int ret;
|
|
|
|
edma_writel(fsl_edma, ~0, fsl_edma->regs.intl);
|
|
|
|
fsl_edma->txirq = platform_get_irq_byname(pdev, "edma-tx");
|
|
if (fsl_edma->txirq < 0)
|
|
return fsl_edma->txirq;
|
|
|
|
fsl_edma->errirq = platform_get_irq_byname(pdev, "edma-err");
|
|
if (fsl_edma->errirq < 0)
|
|
return fsl_edma->errirq;
|
|
|
|
if (fsl_edma->txirq == fsl_edma->errirq) {
|
|
ret = devm_request_irq(&pdev->dev, fsl_edma->txirq,
|
|
fsl_edma_irq_handler, 0, "eDMA", fsl_edma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't register eDMA IRQ.\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = devm_request_irq(&pdev->dev, fsl_edma->txirq,
|
|
fsl_edma_tx_handler, 0, "eDMA tx", fsl_edma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, fsl_edma->errirq,
|
|
fsl_edma_err_handler, 0, "eDMA err", fsl_edma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't register eDMA err IRQ.\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_edma3_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < fsl_edma->n_chans; i++) {
|
|
|
|
struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i];
|
|
|
|
if (fsl_edma->chan_masked & BIT(i))
|
|
continue;
|
|
|
|
/* request channel irq */
|
|
fsl_chan->txirq = platform_get_irq(pdev, i);
|
|
if (fsl_chan->txirq < 0)
|
|
return -EINVAL;
|
|
|
|
fsl_chan->irq_handler = fsl_edma3_tx_handler;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fsl_edma2_irq_init(struct platform_device *pdev,
|
|
struct fsl_edma_engine *fsl_edma)
|
|
{
|
|
int i, ret, irq;
|
|
int count;
|
|
|
|
edma_writel(fsl_edma, ~0, fsl_edma->regs.intl);
|
|
|
|
count = platform_irq_count(pdev);
|
|
dev_dbg(&pdev->dev, "%s Found %d interrupts\r\n", __func__, count);
|
|
if (count <= 2) {
|
|
dev_err(&pdev->dev, "Interrupts in DTS not correct.\n");
|
|
return -EINVAL;
|
|
}
|
|
/*
|
|
* 16 channel independent interrupts + 1 error interrupt on i.mx7ulp.
|
|
* 2 channel share one interrupt, for example, ch0/ch16, ch1/ch17...
|
|
* For now, just simply request irq without IRQF_SHARED flag, since 16
|
|
* channels are enough on i.mx7ulp whose M4 domain own some peripherals.
|
|
*/
|
|
for (i = 0; i < count; i++) {
|
|
irq = platform_get_irq(pdev, i);
|
|
ret = 0;
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
/* The last IRQ is for eDMA err */
|
|
if (i == count - 1) {
|
|
ret = devm_request_irq(&pdev->dev, irq,
|
|
fsl_edma_err_handler,
|
|
0, "eDMA2-ERR", fsl_edma);
|
|
} else {
|
|
fsl_edma->chans[i].txirq = irq;
|
|
fsl_edma->chans[i].irq_handler = fsl_edma2_tx_handler;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_edma_irq_exit(
|
|
struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
|
|
{
|
|
if (fsl_edma->txirq == fsl_edma->errirq) {
|
|
devm_free_irq(&pdev->dev, fsl_edma->txirq, fsl_edma);
|
|
} else {
|
|
devm_free_irq(&pdev->dev, fsl_edma->txirq, fsl_edma);
|
|
devm_free_irq(&pdev->dev, fsl_edma->errirq, fsl_edma);
|
|
}
|
|
}
|
|
|
|
static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nr_clocks; i++)
|
|
clk_disable_unprepare(fsl_edma->muxclk[i]);
|
|
}
|
|
|
|
static struct fsl_edma_drvdata vf610_data = {
|
|
.dmamuxs = DMAMUX_NR,
|
|
.flags = FSL_EDMA_DRV_WRAP_IO,
|
|
.chreg_off = EDMA_TCD,
|
|
.chreg_space_sz = sizeof(struct fsl_edma_hw_tcd),
|
|
.setup_irq = fsl_edma_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata ls1028a_data = {
|
|
.dmamuxs = DMAMUX_NR,
|
|
.flags = FSL_EDMA_DRV_MUX_SWAP | FSL_EDMA_DRV_WRAP_IO,
|
|
.chreg_off = EDMA_TCD,
|
|
.chreg_space_sz = sizeof(struct fsl_edma_hw_tcd),
|
|
.setup_irq = fsl_edma_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata imx7ulp_data = {
|
|
.dmamuxs = 1,
|
|
.chreg_off = EDMA_TCD,
|
|
.chreg_space_sz = sizeof(struct fsl_edma_hw_tcd),
|
|
.flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_CONFIG32,
|
|
.setup_irq = fsl_edma2_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata imx8qm_data = {
|
|
.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_MEM_REMOTE,
|
|
.chreg_space_sz = 0x10000,
|
|
.chreg_off = 0x10000,
|
|
.setup_irq = fsl_edma3_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata imx8ulp_data = {
|
|
.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_CHCLK | FSL_EDMA_DRV_HAS_DMACLK |
|
|
FSL_EDMA_DRV_EDMA3,
|
|
.chreg_space_sz = 0x10000,
|
|
.chreg_off = 0x10000,
|
|
.mux_off = 0x10000 + offsetof(struct fsl_edma3_ch_reg, ch_mux),
|
|
.mux_skip = 0x10000,
|
|
.setup_irq = fsl_edma3_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata imx93_data3 = {
|
|
.flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA3,
|
|
.chreg_space_sz = 0x10000,
|
|
.chreg_off = 0x10000,
|
|
.setup_irq = fsl_edma3_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata imx93_data4 = {
|
|
.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4,
|
|
.chreg_space_sz = 0x8000,
|
|
.chreg_off = 0x10000,
|
|
.mux_off = 0x10000 + offsetof(struct fsl_edma3_ch_reg, ch_mux),
|
|
.mux_skip = 0x8000,
|
|
.setup_irq = fsl_edma3_irq_init,
|
|
};
|
|
|
|
static struct fsl_edma_drvdata imx95_data5 = {
|
|
.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4 |
|
|
FSL_EDMA_DRV_TCD64,
|
|
.chreg_space_sz = 0x8000,
|
|
.chreg_off = 0x10000,
|
|
.mux_off = 0x200,
|
|
.mux_skip = sizeof(u32),
|
|
.setup_irq = fsl_edma3_irq_init,
|
|
};
|
|
|
|
static const struct of_device_id fsl_edma_dt_ids[] = {
|
|
{ .compatible = "fsl,vf610-edma", .data = &vf610_data},
|
|
{ .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data},
|
|
{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
|
|
{ .compatible = "fsl,imx8qm-edma", .data = &imx8qm_data},
|
|
{ .compatible = "fsl,imx8ulp-edma", .data = &imx8ulp_data},
|
|
{ .compatible = "fsl,imx93-edma3", .data = &imx93_data3},
|
|
{ .compatible = "fsl,imx93-edma4", .data = &imx93_data4},
|
|
{ .compatible = "fsl,imx95-edma5", .data = &imx95_data5},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fsl_edma_dt_ids);
|
|
|
|
static int fsl_edma3_attach_pd(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
|
|
{
|
|
struct fsl_edma_chan *fsl_chan;
|
|
struct device_link *link;
|
|
struct device *pd_chan;
|
|
struct device *dev;
|
|
int i;
|
|
|
|
dev = &pdev->dev;
|
|
|
|
for (i = 0; i < fsl_edma->n_chans; i++) {
|
|
if (fsl_edma->chan_masked & BIT(i))
|
|
continue;
|
|
|
|
fsl_chan = &fsl_edma->chans[i];
|
|
|
|
pd_chan = dev_pm_domain_attach_by_id(dev, i);
|
|
if (IS_ERR_OR_NULL(pd_chan)) {
|
|
dev_err(dev, "Failed attach pd %d\n", i);
|
|
return -EINVAL;
|
|
}
|
|
|
|
link = device_link_add(dev, pd_chan, DL_FLAG_STATELESS |
|
|
DL_FLAG_PM_RUNTIME |
|
|
DL_FLAG_RPM_ACTIVE);
|
|
if (!link) {
|
|
dev_err(dev, "Failed to add device_link to %d\n", i);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fsl_chan->pd_dev = pd_chan;
|
|
|
|
pm_runtime_use_autosuspend(fsl_chan->pd_dev);
|
|
pm_runtime_set_autosuspend_delay(fsl_chan->pd_dev, 200);
|
|
pm_runtime_set_active(fsl_chan->pd_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_edma_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct fsl_edma_engine *fsl_edma;
|
|
const struct fsl_edma_drvdata *drvdata = NULL;
|
|
u32 chan_mask[2] = {0, 0};
|
|
char clk_name[36];
|
|
struct edma_regs *regs;
|
|
int chans;
|
|
int ret, i;
|
|
|
|
drvdata = device_get_match_data(&pdev->dev);
|
|
if (!drvdata) {
|
|
dev_err(&pdev->dev, "unable to find driver data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "dma-channels", &chans);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't get dma-channels.\n");
|
|
return ret;
|
|
}
|
|
|
|
fsl_edma = devm_kzalloc(&pdev->dev, struct_size(fsl_edma, chans, chans),
|
|
GFP_KERNEL);
|
|
if (!fsl_edma)
|
|
return -ENOMEM;
|
|
|
|
fsl_edma->drvdata = drvdata;
|
|
fsl_edma->n_chans = chans;
|
|
mutex_init(&fsl_edma->fsl_edma_mutex);
|
|
|
|
fsl_edma->membase = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(fsl_edma->membase))
|
|
return PTR_ERR(fsl_edma->membase);
|
|
|
|
if (!(drvdata->flags & FSL_EDMA_DRV_SPLIT_REG)) {
|
|
fsl_edma_setup_regs(fsl_edma);
|
|
regs = &fsl_edma->regs;
|
|
}
|
|
|
|
if (drvdata->flags & FSL_EDMA_DRV_HAS_DMACLK) {
|
|
fsl_edma->dmaclk = devm_clk_get_enabled(&pdev->dev, "dma");
|
|
if (IS_ERR(fsl_edma->dmaclk)) {
|
|
dev_err(&pdev->dev, "Missing DMA block clock.\n");
|
|
return PTR_ERR(fsl_edma->dmaclk);
|
|
}
|
|
}
|
|
|
|
ret = of_property_read_variable_u32_array(np, "dma-channel-mask", chan_mask, 1, 2);
|
|
|
|
if (ret > 0) {
|
|
fsl_edma->chan_masked = chan_mask[1];
|
|
fsl_edma->chan_masked <<= 32;
|
|
fsl_edma->chan_masked |= chan_mask[0];
|
|
}
|
|
|
|
for (i = 0; i < fsl_edma->drvdata->dmamuxs; i++) {
|
|
char clkname[32];
|
|
|
|
/* eDMAv3 mux register move to TCD area if ch_mux exist */
|
|
if (drvdata->flags & FSL_EDMA_DRV_SPLIT_REG)
|
|
break;
|
|
|
|
fsl_edma->muxbase[i] = devm_platform_ioremap_resource(pdev,
|
|
1 + i);
|
|
if (IS_ERR(fsl_edma->muxbase[i])) {
|
|
/* on error: disable all previously enabled clks */
|
|
fsl_disable_clocks(fsl_edma, i);
|
|
return PTR_ERR(fsl_edma->muxbase[i]);
|
|
}
|
|
|
|
sprintf(clkname, "dmamux%d", i);
|
|
fsl_edma->muxclk[i] = devm_clk_get_enabled(&pdev->dev, clkname);
|
|
if (IS_ERR(fsl_edma->muxclk[i])) {
|
|
dev_err(&pdev->dev, "Missing DMAMUX block clock.\n");
|
|
/* on error: disable all previously enabled clks */
|
|
return PTR_ERR(fsl_edma->muxclk[i]);
|
|
}
|
|
}
|
|
|
|
fsl_edma->big_endian = of_property_read_bool(np, "big-endian");
|
|
|
|
if (drvdata->flags & FSL_EDMA_DRV_HAS_PD) {
|
|
ret = fsl_edma3_attach_pd(pdev, fsl_edma);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (drvdata->flags & FSL_EDMA_DRV_TCD64)
|
|
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
|
|
|
|
INIT_LIST_HEAD(&fsl_edma->dma_dev.channels);
|
|
for (i = 0; i < fsl_edma->n_chans; i++) {
|
|
struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i];
|
|
int len;
|
|
|
|
if (fsl_edma->chan_masked & BIT(i))
|
|
continue;
|
|
|
|
snprintf(fsl_chan->chan_name, sizeof(fsl_chan->chan_name), "%s-CH%02d",
|
|
dev_name(&pdev->dev), i);
|
|
|
|
fsl_chan->edma = fsl_edma;
|
|
fsl_chan->pm_state = RUNNING;
|
|
fsl_chan->srcid = 0;
|
|
fsl_chan->dma_dir = DMA_NONE;
|
|
fsl_chan->vchan.desc_free = fsl_edma_free_desc;
|
|
|
|
len = (drvdata->flags & FSL_EDMA_DRV_SPLIT_REG) ?
|
|
offsetof(struct fsl_edma3_ch_reg, tcd) : 0;
|
|
fsl_chan->tcd = fsl_edma->membase
|
|
+ i * drvdata->chreg_space_sz + drvdata->chreg_off + len;
|
|
fsl_chan->mux_addr = fsl_edma->membase + drvdata->mux_off + i * drvdata->mux_skip;
|
|
|
|
if (drvdata->flags & FSL_EDMA_DRV_HAS_CHCLK) {
|
|
snprintf(clk_name, sizeof(clk_name), "ch%02d", i);
|
|
fsl_chan->clk = devm_clk_get_enabled(&pdev->dev,
|
|
(const char *)clk_name);
|
|
|
|
if (IS_ERR(fsl_chan->clk))
|
|
return PTR_ERR(fsl_chan->clk);
|
|
}
|
|
fsl_chan->pdev = pdev;
|
|
vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);
|
|
|
|
edma_write_tcdreg(fsl_chan, cpu_to_le32(0), csr);
|
|
fsl_edma_chan_mux(fsl_chan, 0, false);
|
|
if (fsl_chan->edma->drvdata->flags & FSL_EDMA_DRV_HAS_CHCLK)
|
|
clk_disable_unprepare(fsl_chan->clk);
|
|
}
|
|
|
|
ret = fsl_edma->drvdata->setup_irq(pdev, fsl_edma);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dma_cap_set(DMA_PRIVATE, fsl_edma->dma_dev.cap_mask);
|
|
dma_cap_set(DMA_SLAVE, fsl_edma->dma_dev.cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, fsl_edma->dma_dev.cap_mask);
|
|
dma_cap_set(DMA_MEMCPY, fsl_edma->dma_dev.cap_mask);
|
|
|
|
fsl_edma->dma_dev.dev = &pdev->dev;
|
|
fsl_edma->dma_dev.device_alloc_chan_resources
|
|
= fsl_edma_alloc_chan_resources;
|
|
fsl_edma->dma_dev.device_free_chan_resources
|
|
= fsl_edma_free_chan_resources;
|
|
fsl_edma->dma_dev.device_tx_status = fsl_edma_tx_status;
|
|
fsl_edma->dma_dev.device_prep_slave_sg = fsl_edma_prep_slave_sg;
|
|
fsl_edma->dma_dev.device_prep_dma_cyclic = fsl_edma_prep_dma_cyclic;
|
|
fsl_edma->dma_dev.device_prep_dma_memcpy = fsl_edma_prep_memcpy;
|
|
fsl_edma->dma_dev.device_config = fsl_edma_slave_config;
|
|
fsl_edma->dma_dev.device_pause = fsl_edma_pause;
|
|
fsl_edma->dma_dev.device_resume = fsl_edma_resume;
|
|
fsl_edma->dma_dev.device_terminate_all = fsl_edma_terminate_all;
|
|
fsl_edma->dma_dev.device_synchronize = fsl_edma_synchronize;
|
|
fsl_edma->dma_dev.device_issue_pending = fsl_edma_issue_pending;
|
|
|
|
fsl_edma->dma_dev.src_addr_widths = FSL_EDMA_BUSWIDTHS;
|
|
fsl_edma->dma_dev.dst_addr_widths = FSL_EDMA_BUSWIDTHS;
|
|
|
|
if (drvdata->flags & FSL_EDMA_DRV_BUS_8BYTE) {
|
|
fsl_edma->dma_dev.src_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
|
|
fsl_edma->dma_dev.dst_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
|
|
}
|
|
|
|
fsl_edma->dma_dev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
|
|
if (drvdata->flags & FSL_EDMA_DRV_DEV_TO_DEV)
|
|
fsl_edma->dma_dev.directions |= BIT(DMA_DEV_TO_DEV);
|
|
|
|
fsl_edma->dma_dev.copy_align = drvdata->flags & FSL_EDMA_DRV_ALIGN_64BYTE ?
|
|
DMAENGINE_ALIGN_64_BYTES :
|
|
DMAENGINE_ALIGN_32_BYTES;
|
|
|
|
/* Per worst case 'nbytes = 1' take CITER as the max_seg_size */
|
|
dma_set_max_seg_size(fsl_edma->dma_dev.dev,
|
|
FIELD_GET(EDMA_TCD_ITER_MASK, EDMA_TCD_ITER_MASK));
|
|
|
|
fsl_edma->dma_dev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
|
|
|
|
platform_set_drvdata(pdev, fsl_edma);
|
|
|
|
ret = dma_async_device_register(&fsl_edma->dma_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Can't register Freescale eDMA engine. (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = of_dma_controller_register(np,
|
|
drvdata->flags & FSL_EDMA_DRV_SPLIT_REG ? fsl_edma3_xlate : fsl_edma_xlate,
|
|
fsl_edma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Can't register Freescale eDMA of_dma. (%d)\n", ret);
|
|
dma_async_device_unregister(&fsl_edma->dma_dev);
|
|
return ret;
|
|
}
|
|
|
|
/* enable round robin arbitration */
|
|
if (!(drvdata->flags & FSL_EDMA_DRV_SPLIT_REG))
|
|
edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, regs->cr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_edma_remove(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct fsl_edma_engine *fsl_edma = platform_get_drvdata(pdev);
|
|
|
|
fsl_edma_irq_exit(pdev, fsl_edma);
|
|
fsl_edma_cleanup_vchan(&fsl_edma->dma_dev);
|
|
of_dma_controller_free(np);
|
|
dma_async_device_unregister(&fsl_edma->dma_dev);
|
|
fsl_disable_clocks(fsl_edma, fsl_edma->drvdata->dmamuxs);
|
|
}
|
|
|
|
static int fsl_edma_suspend_late(struct device *dev)
|
|
{
|
|
struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
|
|
struct fsl_edma_chan *fsl_chan;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
for (i = 0; i < fsl_edma->n_chans; i++) {
|
|
fsl_chan = &fsl_edma->chans[i];
|
|
if (fsl_edma->chan_masked & BIT(i))
|
|
continue;
|
|
spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
|
|
/* Make sure chan is idle or will force disable. */
|
|
if (unlikely(fsl_chan->status == DMA_IN_PROGRESS)) {
|
|
dev_warn(dev, "WARN: There is non-idle channel.");
|
|
fsl_edma_disable_request(fsl_chan);
|
|
fsl_edma_chan_mux(fsl_chan, 0, false);
|
|
}
|
|
|
|
fsl_chan->pm_state = SUSPENDED;
|
|
spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_edma_resume_early(struct device *dev)
|
|
{
|
|
struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
|
|
struct fsl_edma_chan *fsl_chan;
|
|
struct edma_regs *regs = &fsl_edma->regs;
|
|
int i;
|
|
|
|
for (i = 0; i < fsl_edma->n_chans; i++) {
|
|
fsl_chan = &fsl_edma->chans[i];
|
|
if (fsl_edma->chan_masked & BIT(i))
|
|
continue;
|
|
fsl_chan->pm_state = RUNNING;
|
|
edma_write_tcdreg(fsl_chan, 0, csr);
|
|
if (fsl_chan->srcid != 0)
|
|
fsl_edma_chan_mux(fsl_chan, fsl_chan->srcid, true);
|
|
}
|
|
|
|
if (!(fsl_edma->drvdata->flags & FSL_EDMA_DRV_SPLIT_REG))
|
|
edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, regs->cr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* eDMA provides the service to others, so it should be suspend late
|
|
* and resume early. When eDMA suspend, all of the clients should stop
|
|
* the DMA data transmission and let the channel idle.
|
|
*/
|
|
static const struct dev_pm_ops fsl_edma_pm_ops = {
|
|
.suspend_late = fsl_edma_suspend_late,
|
|
.resume_early = fsl_edma_resume_early,
|
|
};
|
|
|
|
static struct platform_driver fsl_edma_driver = {
|
|
.driver = {
|
|
.name = "fsl-edma",
|
|
.of_match_table = fsl_edma_dt_ids,
|
|
.pm = &fsl_edma_pm_ops,
|
|
},
|
|
.probe = fsl_edma_probe,
|
|
.remove_new = fsl_edma_remove,
|
|
};
|
|
|
|
static int __init fsl_edma_init(void)
|
|
{
|
|
return platform_driver_register(&fsl_edma_driver);
|
|
}
|
|
subsys_initcall(fsl_edma_init);
|
|
|
|
static void __exit fsl_edma_exit(void)
|
|
{
|
|
platform_driver_unregister(&fsl_edma_driver);
|
|
}
|
|
module_exit(fsl_edma_exit);
|
|
|
|
MODULE_ALIAS("platform:fsl-edma");
|
|
MODULE_DESCRIPTION("Freescale eDMA engine driver");
|
|
MODULE_LICENSE("GPL v2");
|