mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
669 lines
17 KiB
C
669 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
|
|
*
|
|
* Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
|
|
*
|
|
* Special thanks to Fintek for providing hardware and spec sheets.
|
|
* This driver is based upon the nuvoton, ite and ene drivers for
|
|
* similar hardware.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#include "fintek-cir.h"
|
|
|
|
/* write val to config reg */
|
|
static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg)
|
|
{
|
|
fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)",
|
|
__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
|
|
outb(reg, fintek->cr_ip);
|
|
outb(val, fintek->cr_dp);
|
|
}
|
|
|
|
/* read val from config reg */
|
|
static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg)
|
|
{
|
|
u8 val;
|
|
|
|
outb(reg, fintek->cr_ip);
|
|
val = inb(fintek->cr_dp);
|
|
|
|
fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)",
|
|
__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
|
|
return val;
|
|
}
|
|
|
|
/* update config register bit without changing other bits */
|
|
static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
|
|
{
|
|
u8 tmp = fintek_cr_read(fintek, reg) | val;
|
|
fintek_cr_write(fintek, tmp, reg);
|
|
}
|
|
|
|
/* enter config mode */
|
|
static inline void fintek_config_mode_enable(struct fintek_dev *fintek)
|
|
{
|
|
/* Enabling Config Mode explicitly requires writing 2x */
|
|
outb(CONFIG_REG_ENABLE, fintek->cr_ip);
|
|
outb(CONFIG_REG_ENABLE, fintek->cr_ip);
|
|
}
|
|
|
|
/* exit config mode */
|
|
static inline void fintek_config_mode_disable(struct fintek_dev *fintek)
|
|
{
|
|
outb(CONFIG_REG_DISABLE, fintek->cr_ip);
|
|
}
|
|
|
|
/*
|
|
* When you want to address a specific logical device, write its logical
|
|
* device number to GCR_LOGICAL_DEV_NO
|
|
*/
|
|
static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev)
|
|
{
|
|
fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO);
|
|
}
|
|
|
|
/* write val to cir config register */
|
|
static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset)
|
|
{
|
|
outb(val, fintek->cir_addr + offset);
|
|
}
|
|
|
|
/* read val from cir config register */
|
|
static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset)
|
|
{
|
|
return inb(fintek->cir_addr + offset);
|
|
}
|
|
|
|
/* dump current cir register contents */
|
|
static void cir_dump_regs(struct fintek_dev *fintek)
|
|
{
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
|
|
pr_info("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME);
|
|
pr_info(" * CR CIR BASE ADDR: 0x%x\n",
|
|
(fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) |
|
|
fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO));
|
|
pr_info(" * CR CIR IRQ NUM: 0x%x\n",
|
|
fintek_cr_read(fintek, CIR_CR_IRQ_SEL));
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
pr_info("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME);
|
|
pr_info(" * STATUS: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_STATUS));
|
|
pr_info(" * CONTROL: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_CONTROL));
|
|
pr_info(" * RX_DATA: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_RX_DATA));
|
|
pr_info(" * TX_CONTROL: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_TX_CONTROL));
|
|
pr_info(" * TX_DATA: 0x%x\n",
|
|
fintek_cir_reg_read(fintek, CIR_TX_DATA));
|
|
}
|
|
|
|
/* detect hardware features */
|
|
static int fintek_hw_detect(struct fintek_dev *fintek)
|
|
{
|
|
unsigned long flags;
|
|
u8 chip_major, chip_minor;
|
|
u8 vendor_major, vendor_minor;
|
|
u8 portsel, ir_class;
|
|
u16 vendor, chip;
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* Check if we're using config port 0x4e or 0x2e */
|
|
portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
|
|
if (portsel == 0xff) {
|
|
fit_pr(KERN_INFO, "first portsel read was bunk, trying alt");
|
|
fintek_config_mode_disable(fintek);
|
|
fintek->cr_ip = CR_INDEX_PORT2;
|
|
fintek->cr_dp = CR_DATA_PORT2;
|
|
fintek_config_mode_enable(fintek);
|
|
portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
|
|
}
|
|
fit_dbg("portsel reg: 0x%02x", portsel);
|
|
|
|
ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS);
|
|
fit_dbg("ir_class reg: 0x%02x", ir_class);
|
|
|
|
switch (ir_class) {
|
|
case CLASS_RX_2TX:
|
|
case CLASS_RX_1TX:
|
|
fintek->hw_tx_capable = true;
|
|
break;
|
|
case CLASS_RX_ONLY:
|
|
default:
|
|
fintek->hw_tx_capable = false;
|
|
break;
|
|
}
|
|
|
|
chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI);
|
|
chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO);
|
|
chip = chip_major << 8 | chip_minor;
|
|
|
|
vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI);
|
|
vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO);
|
|
vendor = vendor_major << 8 | vendor_minor;
|
|
|
|
if (vendor != VENDOR_ID_FINTEK)
|
|
fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor);
|
|
else
|
|
fit_dbg("Read Fintek vendor ID from chip");
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
fintek->chip_major = chip_major;
|
|
fintek->chip_minor = chip_minor;
|
|
fintek->chip_vendor = vendor;
|
|
|
|
/*
|
|
* Newer reviews of this chipset uses port 8 instead of 5
|
|
*/
|
|
if ((chip != 0x0408) && (chip != 0x0804))
|
|
fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2;
|
|
else
|
|
fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1;
|
|
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fintek_cir_ldev_init(struct fintek_dev *fintek)
|
|
{
|
|
/* Select CIR logical device and enable */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
|
|
|
|
/* Write allocated CIR address and IRQ information to hardware */
|
|
fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI);
|
|
fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO);
|
|
|
|
fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL);
|
|
|
|
fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)",
|
|
fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len);
|
|
}
|
|
|
|
/* enable CIR interrupts */
|
|
static void fintek_enable_cir_irq(struct fintek_dev *fintek)
|
|
{
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
|
|
}
|
|
|
|
static void fintek_cir_regs_init(struct fintek_dev *fintek)
|
|
{
|
|
/* clear any and all stray interrupts */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
|
|
/* and finally, enable interrupts */
|
|
fintek_enable_cir_irq(fintek);
|
|
}
|
|
|
|
static void fintek_enable_wake(struct fintek_dev *fintek)
|
|
{
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI);
|
|
|
|
/* Allow CIR PME's to wake system */
|
|
fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG);
|
|
/* Enable CIR PME's */
|
|
fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG);
|
|
/* Clear CIR PME status register */
|
|
fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG);
|
|
/* Save state */
|
|
fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
}
|
|
|
|
static int fintek_cmdsize(u8 cmd, u8 subcmd)
|
|
{
|
|
int datasize = 0;
|
|
|
|
switch (cmd) {
|
|
case BUF_COMMAND_NULL:
|
|
if (subcmd == BUF_HW_CMD_HEADER)
|
|
datasize = 1;
|
|
break;
|
|
case BUF_HW_CMD_HEADER:
|
|
if (subcmd == BUF_CMD_G_REVISION)
|
|
datasize = 2;
|
|
break;
|
|
case BUF_COMMAND_HEADER:
|
|
switch (subcmd) {
|
|
case BUF_CMD_S_CARRIER:
|
|
case BUF_CMD_S_TIMEOUT:
|
|
case BUF_RSP_PULSE_COUNT:
|
|
datasize = 2;
|
|
break;
|
|
case BUF_CMD_SIG_END:
|
|
case BUF_CMD_S_TXMASK:
|
|
case BUF_CMD_S_RXSENSOR:
|
|
datasize = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return datasize;
|
|
}
|
|
|
|
/* process ir data stored in driver buffer */
|
|
static void fintek_process_rx_ir_data(struct fintek_dev *fintek)
|
|
{
|
|
struct ir_raw_event rawir = {};
|
|
u8 sample;
|
|
bool event = false;
|
|
int i;
|
|
|
|
for (i = 0; i < fintek->pkts; i++) {
|
|
sample = fintek->buf[i];
|
|
switch (fintek->parser_state) {
|
|
case CMD_HEADER:
|
|
fintek->cmd = sample;
|
|
if ((fintek->cmd == BUF_COMMAND_HEADER) ||
|
|
((fintek->cmd & BUF_COMMAND_MASK) !=
|
|
BUF_PULSE_BIT)) {
|
|
fintek->parser_state = SUBCMD;
|
|
continue;
|
|
}
|
|
fintek->rem = (fintek->cmd & BUF_LEN_MASK);
|
|
fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem);
|
|
if (fintek->rem)
|
|
fintek->parser_state = PARSE_IRDATA;
|
|
else
|
|
ir_raw_event_reset(fintek->rdev);
|
|
break;
|
|
case SUBCMD:
|
|
fintek->rem = fintek_cmdsize(fintek->cmd, sample);
|
|
fintek->parser_state = CMD_DATA;
|
|
break;
|
|
case CMD_DATA:
|
|
fintek->rem--;
|
|
break;
|
|
case PARSE_IRDATA:
|
|
fintek->rem--;
|
|
rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
|
|
rawir.duration = (sample & BUF_SAMPLE_MASK)
|
|
* CIR_SAMPLE_PERIOD;
|
|
|
|
fit_dbg("Storing %s with duration %d",
|
|
rawir.pulse ? "pulse" : "space",
|
|
rawir.duration);
|
|
if (ir_raw_event_store_with_filter(fintek->rdev,
|
|
&rawir))
|
|
event = true;
|
|
break;
|
|
}
|
|
|
|
if ((fintek->parser_state != CMD_HEADER) && !fintek->rem)
|
|
fintek->parser_state = CMD_HEADER;
|
|
}
|
|
|
|
fintek->pkts = 0;
|
|
|
|
if (event) {
|
|
fit_dbg("Calling ir_raw_event_handle");
|
|
ir_raw_event_handle(fintek->rdev);
|
|
}
|
|
}
|
|
|
|
/* copy data from hardware rx register into driver buffer */
|
|
static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs)
|
|
{
|
|
unsigned long flags;
|
|
u8 sample, status;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
|
|
/*
|
|
* We must read data from CIR_RX_DATA until the hardware IR buffer
|
|
* is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in
|
|
* the CIR_STATUS register
|
|
*/
|
|
do {
|
|
sample = fintek_cir_reg_read(fintek, CIR_RX_DATA);
|
|
fit_dbg("%s: sample: 0x%02x", __func__, sample);
|
|
|
|
fintek->buf[fintek->pkts] = sample;
|
|
fintek->pkts++;
|
|
|
|
status = fintek_cir_reg_read(fintek, CIR_STATUS);
|
|
if (!(status & CIR_STATUS_IRQ_EN))
|
|
break;
|
|
} while (status & rx_irqs);
|
|
|
|
fintek_process_rx_ir_data(fintek);
|
|
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
}
|
|
|
|
static void fintek_cir_log_irqs(u8 status)
|
|
{
|
|
fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status,
|
|
status & CIR_STATUS_IRQ_EN ? " IRQEN" : "",
|
|
status & CIR_STATUS_TX_FINISH ? " TXF" : "",
|
|
status & CIR_STATUS_TX_UNDERRUN ? " TXU" : "",
|
|
status & CIR_STATUS_RX_TIMEOUT ? " RXTO" : "",
|
|
status & CIR_STATUS_RX_RECEIVE ? " RXOK" : "");
|
|
}
|
|
|
|
/* interrupt service routine for incoming and outgoing CIR data */
|
|
static irqreturn_t fintek_cir_isr(int irq, void *data)
|
|
{
|
|
struct fintek_dev *fintek = data;
|
|
u8 status, rx_irqs;
|
|
|
|
fit_dbg_verbose("%s firing", __func__);
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/*
|
|
* Get IR Status register contents. Write 1 to ack/clear
|
|
*
|
|
* bit: reg name - description
|
|
* 3: TX_FINISH - TX is finished
|
|
* 2: TX_UNDERRUN - TX underrun
|
|
* 1: RX_TIMEOUT - RX data timeout
|
|
* 0: RX_RECEIVE - RX data received
|
|
*/
|
|
status = fintek_cir_reg_read(fintek, CIR_STATUS);
|
|
if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) {
|
|
fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status);
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
return IRQ_RETVAL(IRQ_NONE);
|
|
}
|
|
|
|
if (debug)
|
|
fintek_cir_log_irqs(status);
|
|
|
|
rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT);
|
|
if (rx_irqs)
|
|
fintek_get_rx_ir_data(fintek, rx_irqs);
|
|
|
|
/* ack/clear all irq flags we've got */
|
|
fintek_cir_reg_write(fintek, status, CIR_STATUS);
|
|
|
|
fit_dbg_verbose("%s done", __func__);
|
|
return IRQ_RETVAL(IRQ_HANDLED);
|
|
}
|
|
|
|
static void fintek_enable_cir(struct fintek_dev *fintek)
|
|
{
|
|
/* set IRQ enabled */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* enable the CIR logical device */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/* clear all pending interrupts */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
|
|
/* enable interrupts */
|
|
fintek_enable_cir_irq(fintek);
|
|
}
|
|
|
|
static void fintek_disable_cir(struct fintek_dev *fintek)
|
|
{
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* disable the CIR logical device */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
}
|
|
|
|
static int fintek_open(struct rc_dev *dev)
|
|
{
|
|
struct fintek_dev *fintek = dev->priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
fintek_enable_cir(fintek);
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fintek_close(struct rc_dev *dev)
|
|
{
|
|
struct fintek_dev *fintek = dev->priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
fintek_disable_cir(fintek);
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
}
|
|
|
|
/* Allocate memory, probe hardware, and initialize everything */
|
|
static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
|
|
{
|
|
struct fintek_dev *fintek;
|
|
struct rc_dev *rdev;
|
|
int ret = -ENOMEM;
|
|
|
|
fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL);
|
|
if (!fintek)
|
|
return ret;
|
|
|
|
/* input device for IR remote (and tx) */
|
|
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!rdev)
|
|
goto exit_free_dev_rdev;
|
|
|
|
ret = -ENODEV;
|
|
/* validate pnp resources */
|
|
if (!pnp_port_valid(pdev, 0)) {
|
|
dev_err(&pdev->dev, "IR PNP Port not valid!\n");
|
|
goto exit_free_dev_rdev;
|
|
}
|
|
|
|
if (!pnp_irq_valid(pdev, 0)) {
|
|
dev_err(&pdev->dev, "IR PNP IRQ not valid!\n");
|
|
goto exit_free_dev_rdev;
|
|
}
|
|
|
|
fintek->cir_addr = pnp_port_start(pdev, 0);
|
|
fintek->cir_irq = pnp_irq(pdev, 0);
|
|
fintek->cir_port_len = pnp_port_len(pdev, 0);
|
|
|
|
fintek->cr_ip = CR_INDEX_PORT;
|
|
fintek->cr_dp = CR_DATA_PORT;
|
|
|
|
spin_lock_init(&fintek->fintek_lock);
|
|
|
|
pnp_set_drvdata(pdev, fintek);
|
|
fintek->pdev = pdev;
|
|
|
|
ret = fintek_hw_detect(fintek);
|
|
if (ret)
|
|
goto exit_free_dev_rdev;
|
|
|
|
/* Initialize CIR & CIR Wake Logical Devices */
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_cir_ldev_init(fintek);
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/* Initialize CIR & CIR Wake Config Registers */
|
|
fintek_cir_regs_init(fintek);
|
|
|
|
/* Set up the rc device */
|
|
rdev->priv = fintek;
|
|
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
rdev->open = fintek_open;
|
|
rdev->close = fintek_close;
|
|
rdev->device_name = FINTEK_DESCRIPTION;
|
|
rdev->input_phys = "fintek/cir0";
|
|
rdev->input_id.bustype = BUS_HOST;
|
|
rdev->input_id.vendor = VENDOR_ID_FINTEK;
|
|
rdev->input_id.product = fintek->chip_major;
|
|
rdev->input_id.version = fintek->chip_minor;
|
|
rdev->dev.parent = &pdev->dev;
|
|
rdev->driver_name = FINTEK_DRIVER_NAME;
|
|
rdev->map_name = RC_MAP_RC6_MCE;
|
|
rdev->timeout = 1000;
|
|
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
|
|
rdev->rx_resolution = CIR_SAMPLE_PERIOD;
|
|
|
|
fintek->rdev = rdev;
|
|
|
|
ret = -EBUSY;
|
|
/* now claim resources */
|
|
if (!request_region(fintek->cir_addr,
|
|
fintek->cir_port_len, FINTEK_DRIVER_NAME))
|
|
goto exit_free_dev_rdev;
|
|
|
|
if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
|
|
FINTEK_DRIVER_NAME, (void *)fintek))
|
|
goto exit_free_cir_addr;
|
|
|
|
ret = rc_register_device(rdev);
|
|
if (ret)
|
|
goto exit_free_irq;
|
|
|
|
device_init_wakeup(&pdev->dev, true);
|
|
|
|
fit_pr(KERN_NOTICE, "driver has been successfully loaded\n");
|
|
if (debug)
|
|
cir_dump_regs(fintek);
|
|
|
|
return 0;
|
|
|
|
exit_free_irq:
|
|
free_irq(fintek->cir_irq, fintek);
|
|
exit_free_cir_addr:
|
|
release_region(fintek->cir_addr, fintek->cir_port_len);
|
|
exit_free_dev_rdev:
|
|
rc_free_device(rdev);
|
|
kfree(fintek);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fintek_remove(struct pnp_dev *pdev)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
/* disable CIR */
|
|
fintek_disable_cir(fintek);
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
/* enable CIR Wake (for IR power-on) */
|
|
fintek_enable_wake(fintek);
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
/* free resources */
|
|
free_irq(fintek->cir_irq, fintek);
|
|
release_region(fintek->cir_addr, fintek->cir_port_len);
|
|
|
|
rc_unregister_device(fintek->rdev);
|
|
|
|
kfree(fintek);
|
|
}
|
|
|
|
static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
unsigned long flags;
|
|
|
|
fit_dbg("%s called", __func__);
|
|
|
|
spin_lock_irqsave(&fintek->fintek_lock, flags);
|
|
|
|
/* disable all CIR interrupts */
|
|
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
|
|
|
|
spin_unlock_irqrestore(&fintek->fintek_lock, flags);
|
|
|
|
fintek_config_mode_enable(fintek);
|
|
|
|
/* disable cir logical dev */
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
/* make sure wake is enabled */
|
|
fintek_enable_wake(fintek);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fintek_resume(struct pnp_dev *pdev)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
|
|
fit_dbg("%s called", __func__);
|
|
|
|
/* open interrupt */
|
|
fintek_enable_cir_irq(fintek);
|
|
|
|
/* Enable CIR logical device */
|
|
fintek_config_mode_enable(fintek);
|
|
fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
|
|
fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
|
|
|
|
fintek_config_mode_disable(fintek);
|
|
|
|
fintek_cir_regs_init(fintek);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fintek_shutdown(struct pnp_dev *pdev)
|
|
{
|
|
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
|
|
fintek_enable_wake(fintek);
|
|
}
|
|
|
|
static const struct pnp_device_id fintek_ids[] = {
|
|
{ "FIT0002", 0 }, /* CIR */
|
|
{ "", 0 },
|
|
};
|
|
|
|
static struct pnp_driver fintek_driver = {
|
|
.name = FINTEK_DRIVER_NAME,
|
|
.id_table = fintek_ids,
|
|
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
|
|
.probe = fintek_probe,
|
|
.remove = fintek_remove,
|
|
.suspend = fintek_suspend,
|
|
.resume = fintek_resume,
|
|
.shutdown = fintek_shutdown,
|
|
};
|
|
|
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Enable debugging output");
|
|
|
|
MODULE_DEVICE_TABLE(pnp, fintek_ids);
|
|
MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver");
|
|
|
|
MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_pnp_driver(fintek_driver);
|