mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-26 12:34:41 +08:00
61aaaa8110
There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).
Enabling qca,ar71xx causes a warning, so let's fix the node names:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
From schema: schemas/phy/phy-provider.yaml
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: ChiYuan Huang <cy_huang@richtek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210720172025.363238-1-robh@kernel.org
270 lines
9.1 KiB
YAML
270 lines
9.1 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
|
|
|
|
maintainers:
|
|
- Ramesh Shanmugasundaram <rashanmu@gmail.com>
|
|
- Fabrizio Castro <fabrizio.castro.jz@renesas.com>
|
|
|
|
description: |
|
|
R-Car Gen3 DRIF is a SPI like receive only slave device. A general
|
|
representation of DRIF interfacing with a master device is shown below.
|
|
|
|
+---------------------+ +---------------------+
|
|
| |-----SCK------->|CLK |
|
|
| Master |-----SS-------->|SYNC DRIFn (slave) |
|
|
| |-----SD0------->|D0 |
|
|
| |-----SD1------->|D1 |
|
|
+---------------------+ +---------------------+
|
|
|
|
As per datasheet, each DRIF channel (drifn) is made up of two internal
|
|
channels (drifn0 & drifn1). These two internal channels share the common
|
|
CLK & SYNC. Each internal channel has its own dedicated resources like
|
|
irq, dma channels, address space & clock. This internal split is not
|
|
visible to the external master device.
|
|
|
|
The device tree model represents each internal channel as a separate node.
|
|
The internal channels sharing the CLK & SYNC are tied together by their
|
|
phandles using a property called "renesas,bonding". For the rest of
|
|
the documentation, unless explicitly stated, the word channel implies an
|
|
internal channel.
|
|
|
|
When both internal channels are enabled they need to be managed together
|
|
as one (i.e.) they cannot operate alone as independent devices. Out of the
|
|
two, one of them needs to act as a primary device that accepts common
|
|
properties of both the internal channels. This channel is identified by a
|
|
property called "renesas,primary-bond".
|
|
|
|
To summarize,
|
|
* When both the internal channels that are bonded together are enabled,
|
|
the zeroth channel is selected as primary-bond. This channels accepts
|
|
properties common to all the members of the bond.
|
|
* When only one of the bonded channels need to be enabled, the property
|
|
"renesas,bonding" or "renesas,primary-bond" will have no effect. That
|
|
enabled channel can act alone as any other independent device.
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- renesas,r8a7795-drif # R-Car H3
|
|
- renesas,r8a7796-drif # R-Car M3-W
|
|
- renesas,r8a77965-drif # R-Car M3-N
|
|
- renesas,r8a77990-drif # R-Car E3
|
|
- const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
const: fck
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
dmas:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
dma-names:
|
|
minItems: 1
|
|
items:
|
|
- const: rx
|
|
- const: rx
|
|
|
|
renesas,bonding:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
The phandle to the other internal channel of DRIF
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
renesas,primary-bond:
|
|
type: boolean
|
|
description:
|
|
Indicates that the channel acts as primary among the bonded channels.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
unevaluatedProperties: false
|
|
description:
|
|
Child port node corresponding to the data input. The port node must
|
|
contain at least one endpoint.
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/graph.yaml#/$defs/endpoint-base
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
sync-active:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
description:
|
|
Indicates sync signal polarity, 0/1 for low/high respectively.
|
|
This property maps to SYNCAC bit in the hardware manual. The
|
|
default is 1 (active high).
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- resets
|
|
- dmas
|
|
- dma-names
|
|
- renesas,bonding
|
|
- power-domains
|
|
|
|
allOf:
|
|
- if:
|
|
required:
|
|
- renesas,primary-bond
|
|
then:
|
|
required:
|
|
- pinctrl-0
|
|
- pinctrl-names
|
|
- port
|
|
|
|
- if:
|
|
required:
|
|
- port
|
|
then:
|
|
required:
|
|
- pinctrl-0
|
|
- pinctrl-names
|
|
else:
|
|
properties:
|
|
pinctrl-0: false
|
|
pinctrl-names: false
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
# Example with both internal channels enabled.
|
|
#
|
|
# When interfacing with a third party tuner device with two data pins as shown
|
|
# below.
|
|
#
|
|
# +---------------------+ +---------------------+
|
|
# | |-----SCK------->|CLK |
|
|
# | Master |-----SS-------->|SYNC DRIFn (slave) |
|
|
# | |-----SD0------->|D0 |
|
|
# | |-----SD1------->|D1 |
|
|
# +---------------------+ +---------------------+
|
|
- |
|
|
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/r8a7795-sysc.h>
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
drif00: rif@e6f40000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f40000 0 0x64>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 515>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x20>, <&dmac2 0x20>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
renesas,bonding = <&drif01>;
|
|
resets = <&cpg 515>;
|
|
renesas,primary-bond;
|
|
pinctrl-0 = <&drif0_pins>;
|
|
pinctrl-names = "default";
|
|
port {
|
|
drif0_ep: endpoint {
|
|
remote-endpoint = <&tuner_ep>;
|
|
};
|
|
};
|
|
};
|
|
|
|
drif01: rif@e6f50000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f50000 0 0x64>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 514>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x22>, <&dmac2 0x22>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
renesas,bonding = <&drif00>;
|
|
resets = <&cpg 514>;
|
|
};
|
|
};
|
|
|
|
# Example with internal channel 1 alone enabled.
|
|
#
|
|
# When interfacing with a third party tuner device with one data pin as shown
|
|
# below.
|
|
#
|
|
# +---------------------+ +---------------------+
|
|
# | |-----SCK------->|CLK |
|
|
# | Master |-----SS-------->|SYNC DRIFn (slave) |
|
|
# | | |D0 (unused) |
|
|
# | |-----SD-------->|D1 |
|
|
# +---------------------+ +---------------------+
|
|
- |
|
|
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/r8a7795-sysc.h>
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
drif10: rif@e6f60000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f60000 0 0x64>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 513>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x24>, <&dmac2 0x24>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
resets = <&cpg 513>;
|
|
renesas,bonding = <&drif11>;
|
|
};
|
|
|
|
drif11: rif@e6f70000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f70000 0 0x64>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 512>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x26>, <&dmac2 0x26>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
resets = <&cpg 512>;
|
|
renesas,bonding = <&drif10>;
|
|
pinctrl-0 = <&drif1_pins>;
|
|
pinctrl-names = "default";
|
|
port {
|
|
drif1_ep: endpoint {
|
|
remote-endpoint = <&tuner_ep1>;
|
|
sync-active = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|