linux/arch/arm/mach-omap2
Jorge Eduardo Candelaria 9319b9da35 ARM: McBSP: Fix request for irq in OMAP4
In OMAP4, there is only one irq line for TX and RX paths. Use
the correct irq line to avoid errors at runtime.

Also, request irq line only once (instead of requesting for TX
and RX).

Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-14 11:20:01 +01:00
..
include/mach AM35xx: Introduce am35xx.h file 2010-02-15 10:03:35 -08:00
board-2430sdp.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-3430sdp.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-3630sdp.c ARM/OMAP: Remove the +x bit from a couple of source files 2010-03-12 09:16:09 -08:00
board-4430sdp.c omap4: Fix build break by moving omap_smc1 into a separate .S 2010-03-11 09:38:53 -08:00
board-am3517evm.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-apollon.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-cm-t35.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-devkit8000.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-generic.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-h4.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-igep0020.c omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board 2010-03-11 14:50:00 -08:00
board-ldp.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-n8x0.c omap2: add USB initialization for tusb6010 2010-03-11 10:22:39 -08:00
board-omap3beagle.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-omap3evm.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-omap3pandora.c omap3: pandora: add missing i2c3 board_info 2010-03-11 15:55:43 -08:00
board-omap3touchbook.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-overo.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-rx51-peripherals.c omap: RX51: Remux to pull eMMC lines down when powering off 2010-02-15 10:03:34 -08:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51.c Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-02-23 19:22:48 -08:00
board-sdp-flash.c omap3: SDP: Introducing 'board-sdp-flash.c' for flash init 2010-02-15 10:03:33 -08:00
board-zoom2.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-zoom3.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
board-zoom-debugboard.c omap3: zoom: rename zoom2 name to generic zoom 2009-11-22 10:24:33 -08:00
board-zoom-peripherals.c ARM/OMAP: Remove the +x bit from a couple of source files 2010-03-12 09:16:09 -08:00
clkt2xxx_apll.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c 2010-01-26 20:13:06 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630 2010-02-24 12:29:43 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c omap2: add USB initialization for tusb6010 2010-03-11 10:22:39 -08:00
clock2430_data.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: convert clock34xx.h to clock34xx_data.c 2009-12-11 16:12:15 -07:00
clock.c OMAP2+ clock: revise omap2_clk_{disable,enable}() 2010-02-24 17:45:16 -07:00
clock.h OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clockdomain.c OMAP2+ clock: revise omap2_clk_{disable,enable}() 2010-02-24 17:45:16 -07:00
clockdomains44xx.h ARM: OMAP4 clock domains : Add the missing Clock Domain Structure 2010-01-26 20:12:58 -07:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
cm4xxx.c omap: Fix 44xx compile 2009-09-24 16:23:07 -07:00
cm44xx.h ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4 2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h [ARM] OMAP2 PRCM: clean up CM_IDLEST bits 2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h OMAP3 clock: add support for 192Mhz DPLL4M2 output 2010-02-24 12:15:03 -07:00
cm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
cm.c OMAP clock/hwmod: fix off-by-one errors 2009-12-11 17:00:43 -07:00
cm.h OMAP2/3 clock: Extend find_idlest() to pass back idle state value 2010-02-24 12:05:54 -07:00
control.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
cpuidle34xx.c OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
devices.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
dpll3xxx.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init 2010-02-15 10:03:33 -08:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc.c omap2/3/4: gpmc: kill compile warning 2010-02-15 10:03:33 -08:00
hsmmc.c omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
hsmmc.h omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
i2c.c omap: i2c: Fix muxing for command line enabled bus 2010-02-25 14:45:08 -08:00
id.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
io.c OMAP4: fix temporary hacks that break multi-omap PM 2010-03-11 15:55:43 -08:00
iommu2.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig Add minimal support for DevKit8000 2010-02-19 15:22:17 -08:00
mailbox.c omap2/3/4: mailbox: remove compiler warning 2010-03-11 14:50:00 -08:00
Makefile omap4: Fix build break by moving omap_smc1 into a separate .S 2010-03-11 09:38:53 -08:00
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c ARM: McBSP: Fix request for irq in OMAP4 2010-05-14 11:20:01 +01:00
mux34xx.c omap: Fix 3630 mux errors 2010-02-03 08:48:06 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux.c Merge branch 'omap-fixes-for-linus' into omap-for-linus 2010-02-17 14:08:58 -08:00
mux.h omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3 2010-02-15 09:27:02 -08:00
omap3-iommu.c omap: iommu: reorganize 2009-11-22 10:24:32 -08:00
omap44xx-smc.S omap4: Fix build break by moving omap_smc1 into a separate .S 2010-03-11 09:38:53 -08:00
omap_hwmod_3xxx_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_2420_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_2430_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap-headsmp.S OMAP4: AuxCoreBoot registers only accessible in secure mode 2009-12-11 16:16:35 -08:00
omap-smp.c OMAP4: Remove the secondary wait loop 2009-12-11 16:16:35 -08:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm24xx.c OMAP clockdomains: add usecounting for wakeup and sleep dependencies 2010-01-26 20:13:01 -07:00
pm34xx.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
pm-debug.c OMAP3 PM: Adding counters for power domain logic off and mem off during retention. 2010-02-24 12:05:50 -07:00
pm.h OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
powerdomain.c OMAP3 PM: Adding counters for power domain logic off and mem off during retention. 2010-02-24 12:05:50 -07:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure 2010-02-24 12:05:50 -07:00
powerdomains44xx.h ARM: OMAP4: PM: Add the Autogenerated OMAP4 specific power domain framework. 2010-01-26 20:12:52 -07:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
prcm-common.h ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up. 2010-01-26 20:12:51 -07:00
prcm.c omap: pass the reboot command to the boot loader 2010-03-11 14:50:00 -08:00
prm44xx.h OMAP4: PRCM: Fix the base address for CHIRONSS reg defines 2010-01-20 13:35:27 -07:00
prm-regbits-24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h OMAP3: PM: Enable IO-CHAIN wakeup 2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
prm.h ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up. 2010-01-26 20:12:51 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c OMAP2: serial.c: Fix number of uarts in early_init 2010-03-11 14:50:00 -08:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Added support for L2 aux ctrl register save and restore 2010-02-23 11:05:07 -08:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap2/3/4: ehci: avoid compiler error with touchbook 2010-03-11 09:32:03 -08:00
usb-musb.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-tusb6010.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00