mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
9f72d4757c
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as SM8450 does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. This results in timeouts like below: pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) Add the device to the Command Completed quirk to mark commands "completed" immediately unless they change the "Control" bits. Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
1097 lines
30 KiB
C
1097 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* PCI Express PCI Hot Plug Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
|
|
*/
|
|
|
|
#define dev_fmt(fmt) "pciehp: " fmt
|
|
|
|
#include <linux/dmi.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
|
|
/*
|
|
* Match all Dell systems, as some Dell systems have inband
|
|
* presence disabled on NVMe slots (but don't support the bit to
|
|
* report it). Setting inband presence disabled should have no
|
|
* negative effect, except on broken hotplug slots that never
|
|
* assert presence detect--and those will still work, they will
|
|
* just have a bit of extra delay before being probed.
|
|
*/
|
|
{
|
|
.ident = "Dell System",
|
|
.matches = {
|
|
DMI_MATCH(DMI_OEM_STRING, "Dell System"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
|
|
{
|
|
return ctrl->pcie->port;
|
|
}
|
|
|
|
static irqreturn_t pciehp_isr(int irq, void *dev_id);
|
|
static irqreturn_t pciehp_ist(int irq, void *dev_id);
|
|
static int pciehp_poll(void *data);
|
|
|
|
static inline int pciehp_request_irq(struct controller *ctrl)
|
|
{
|
|
int retval, irq = ctrl->pcie->irq;
|
|
|
|
if (pciehp_poll_mode) {
|
|
ctrl->poll_thread = kthread_run(&pciehp_poll, ctrl,
|
|
"pciehp_poll-%s",
|
|
slot_name(ctrl));
|
|
return PTR_ERR_OR_ZERO(ctrl->poll_thread);
|
|
}
|
|
|
|
/* Installs the interrupt handler */
|
|
retval = request_threaded_irq(irq, pciehp_isr, pciehp_ist,
|
|
IRQF_SHARED, "pciehp", ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n",
|
|
irq);
|
|
return retval;
|
|
}
|
|
|
|
static inline void pciehp_free_irq(struct controller *ctrl)
|
|
{
|
|
if (pciehp_poll_mode)
|
|
kthread_stop(ctrl->poll_thread);
|
|
else
|
|
free_irq(ctrl->pcie->irq, ctrl);
|
|
}
|
|
|
|
static int pcie_poll_cmd(struct controller *ctrl, int timeout)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
|
|
do {
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (PCI_POSSIBLE_ERROR(slot_status)) {
|
|
ctrl_info(ctrl, "%s: no response from device\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
if (slot_status & PCI_EXP_SLTSTA_CC) {
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_CC);
|
|
ctrl->cmd_busy = 0;
|
|
smp_mb();
|
|
return 1;
|
|
}
|
|
msleep(10);
|
|
timeout -= 10;
|
|
} while (timeout >= 0);
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
static void pcie_wait_cmd(struct controller *ctrl)
|
|
{
|
|
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
|
|
unsigned long duration = msecs_to_jiffies(msecs);
|
|
unsigned long cmd_timeout = ctrl->cmd_started + duration;
|
|
unsigned long now, timeout;
|
|
int rc;
|
|
|
|
/*
|
|
* If the controller does not generate notifications for command
|
|
* completions, we never need to wait between writes.
|
|
*/
|
|
if (NO_CMD_CMPL(ctrl))
|
|
return;
|
|
|
|
if (!ctrl->cmd_busy)
|
|
return;
|
|
|
|
/*
|
|
* Even if the command has already timed out, we want to call
|
|
* pcie_poll_cmd() so it can clear PCI_EXP_SLTSTA_CC.
|
|
*/
|
|
now = jiffies;
|
|
if (time_before_eq(cmd_timeout, now))
|
|
timeout = 1;
|
|
else
|
|
timeout = cmd_timeout - now;
|
|
|
|
if (ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE &&
|
|
ctrl->slot_ctrl & PCI_EXP_SLTCTL_CCIE)
|
|
rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
|
|
else
|
|
rc = pcie_poll_cmd(ctrl, jiffies_to_msecs(timeout));
|
|
|
|
if (!rc)
|
|
ctrl_info(ctrl, "Timeout on hotplug command %#06x (issued %u msec ago)\n",
|
|
ctrl->slot_ctrl,
|
|
jiffies_to_msecs(jiffies - ctrl->cmd_started));
|
|
}
|
|
|
|
#define CC_ERRATUM_MASK (PCI_EXP_SLTCTL_PCC | \
|
|
PCI_EXP_SLTCTL_PIC | \
|
|
PCI_EXP_SLTCTL_AIC | \
|
|
PCI_EXP_SLTCTL_EIC)
|
|
|
|
static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
|
|
u16 mask, bool wait)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl_orig, slot_ctrl;
|
|
|
|
mutex_lock(&ctrl->ctrl_lock);
|
|
|
|
/*
|
|
* Always wait for any previous command that might still be in progress
|
|
*/
|
|
pcie_wait_cmd(ctrl);
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
if (PCI_POSSIBLE_ERROR(slot_ctrl)) {
|
|
ctrl_info(ctrl, "%s: no response from device\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
slot_ctrl_orig = slot_ctrl;
|
|
slot_ctrl &= ~mask;
|
|
slot_ctrl |= (cmd & mask);
|
|
ctrl->cmd_busy = 1;
|
|
smp_mb();
|
|
ctrl->slot_ctrl = slot_ctrl;
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl);
|
|
ctrl->cmd_started = jiffies;
|
|
|
|
/*
|
|
* Controllers with the Intel CF118 and similar errata advertise
|
|
* Command Completed support, but they only set Command Completed
|
|
* if we change the "Control" bits for power, power indicator,
|
|
* attention indicator, or interlock. If we only change the
|
|
* "Enable" bits, they never set the Command Completed bit.
|
|
*/
|
|
if (pdev->broken_cmd_compl &&
|
|
(slot_ctrl_orig & CC_ERRATUM_MASK) == (slot_ctrl & CC_ERRATUM_MASK))
|
|
ctrl->cmd_busy = 0;
|
|
|
|
/*
|
|
* Optionally wait for the hardware to be ready for a new command,
|
|
* indicating completion of the above issued command.
|
|
*/
|
|
if (wait)
|
|
pcie_wait_cmd(ctrl);
|
|
|
|
out:
|
|
mutex_unlock(&ctrl->ctrl_lock);
|
|
}
|
|
|
|
/**
|
|
* pcie_write_cmd - Issue controller command
|
|
* @ctrl: controller to which the command is issued
|
|
* @cmd: command value written to slot control register
|
|
* @mask: bitmask of slot control register to be modified
|
|
*/
|
|
static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
|
|
{
|
|
pcie_do_write_cmd(ctrl, cmd, mask, true);
|
|
}
|
|
|
|
/* Same as above without waiting for the hardware to latch */
|
|
static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask)
|
|
{
|
|
pcie_do_write_cmd(ctrl, cmd, mask, false);
|
|
}
|
|
|
|
/**
|
|
* pciehp_check_link_active() - Is the link active
|
|
* @ctrl: PCIe hotplug controller
|
|
*
|
|
* Check whether the downstream link is currently active. Note it is
|
|
* possible that the card is removed immediately after this so the
|
|
* caller may need to take it into account.
|
|
*
|
|
* If the hotplug controller itself is not available anymore returns
|
|
* %-ENODEV.
|
|
*/
|
|
int pciehp_check_link_active(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 lnk_status;
|
|
int ret;
|
|
|
|
ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
|
|
if (ret == PCIBIOS_DEVICE_NOT_FOUND || PCI_POSSIBLE_ERROR(lnk_status))
|
|
return -ENODEV;
|
|
|
|
ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
|
|
{
|
|
u32 l;
|
|
int count = 0;
|
|
int delay = 1000, step = 20;
|
|
bool found = false;
|
|
|
|
do {
|
|
found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0);
|
|
count++;
|
|
|
|
if (found)
|
|
break;
|
|
|
|
msleep(step);
|
|
delay -= step;
|
|
} while (delay > 0);
|
|
|
|
if (count > 1)
|
|
pr_debug("pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n",
|
|
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
|
|
PCI_FUNC(devfn), count, step, l);
|
|
|
|
return found;
|
|
}
|
|
|
|
static void pcie_wait_for_presence(struct pci_dev *pdev)
|
|
{
|
|
int timeout = 1250;
|
|
u16 slot_status;
|
|
|
|
do {
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status & PCI_EXP_SLTSTA_PDS)
|
|
return;
|
|
msleep(10);
|
|
timeout -= 10;
|
|
} while (timeout > 0);
|
|
}
|
|
|
|
int pciehp_check_link_status(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
bool found;
|
|
u16 lnk_status;
|
|
|
|
if (!pcie_wait_for_link(pdev, true)) {
|
|
ctrl_info(ctrl, "Slot(%s): No link\n", slot_name(ctrl));
|
|
return -1;
|
|
}
|
|
|
|
if (ctrl->inband_presence_disabled)
|
|
pcie_wait_for_presence(pdev);
|
|
|
|
found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
|
|
PCI_DEVFN(0, 0));
|
|
|
|
/* ignore link or presence changes up to this point */
|
|
if (found)
|
|
atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC),
|
|
&ctrl->pending_events);
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
if ((lnk_status & PCI_EXP_LNKSTA_LT) ||
|
|
!(lnk_status & PCI_EXP_LNKSTA_NLW)) {
|
|
ctrl_info(ctrl, "Slot(%s): Cannot train link: status %#06x\n",
|
|
slot_name(ctrl), lnk_status);
|
|
return -1;
|
|
}
|
|
|
|
pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
|
|
|
|
if (!found) {
|
|
ctrl_info(ctrl, "Slot(%s): No device found\n",
|
|
slot_name(ctrl));
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __pciehp_link_set(struct controller *ctrl, bool enable)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 lnk_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &lnk_ctrl);
|
|
|
|
if (enable)
|
|
lnk_ctrl &= ~PCI_EXP_LNKCTL_LD;
|
|
else
|
|
lnk_ctrl |= PCI_EXP_LNKCTL_LD;
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, lnk_ctrl);
|
|
ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl);
|
|
return 0;
|
|
}
|
|
|
|
static int pciehp_link_enable(struct controller *ctrl)
|
|
{
|
|
return __pciehp_link_set(ctrl, true);
|
|
}
|
|
|
|
int pciehp_get_raw_indicator_status(struct hotplug_slot *hotplug_slot,
|
|
u8 *status)
|
|
{
|
|
struct controller *ctrl = to_ctrl(hotplug_slot);
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pci_config_pm_runtime_get(pdev);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
pci_config_pm_runtime_put(pdev);
|
|
*status = (slot_ctrl & (PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC)) >> 6;
|
|
return 0;
|
|
}
|
|
|
|
int pciehp_get_attention_status(struct hotplug_slot *hotplug_slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = to_ctrl(hotplug_slot);
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pci_config_pm_runtime_get(pdev);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
pci_config_pm_runtime_put(pdev);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
switch (slot_ctrl & PCI_EXP_SLTCTL_AIC) {
|
|
case PCI_EXP_SLTCTL_ATTN_IND_ON:
|
|
*status = 1; /* On */
|
|
break;
|
|
case PCI_EXP_SLTCTL_ATTN_IND_BLINK:
|
|
*status = 2; /* Blink */
|
|
break;
|
|
case PCI_EXP_SLTCTL_ATTN_IND_OFF:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void pciehp_get_power_status(struct controller *ctrl, u8 *status)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) {
|
|
case PCI_EXP_SLTCTL_PWR_ON:
|
|
*status = 1; /* On */
|
|
break;
|
|
case PCI_EXP_SLTCTL_PWR_OFF:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pciehp_get_latch_status(struct controller *ctrl, u8 *status)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS);
|
|
}
|
|
|
|
/**
|
|
* pciehp_card_present() - Is the card present
|
|
* @ctrl: PCIe hotplug controller
|
|
*
|
|
* Function checks whether the card is currently present in the slot and
|
|
* in that case returns true. Note it is possible that the card is
|
|
* removed immediately after the check so the caller may need to take
|
|
* this into account.
|
|
*
|
|
* It the hotplug controller itself is not available anymore returns
|
|
* %-ENODEV.
|
|
*/
|
|
int pciehp_card_present(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
int ret;
|
|
|
|
ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (ret == PCIBIOS_DEVICE_NOT_FOUND || PCI_POSSIBLE_ERROR(slot_status))
|
|
return -ENODEV;
|
|
|
|
return !!(slot_status & PCI_EXP_SLTSTA_PDS);
|
|
}
|
|
|
|
/**
|
|
* pciehp_card_present_or_link_active() - whether given slot is occupied
|
|
* @ctrl: PCIe hotplug controller
|
|
*
|
|
* Unlike pciehp_card_present(), which determines presence solely from the
|
|
* Presence Detect State bit, this helper also returns true if the Link Active
|
|
* bit is set. This is a concession to broken hotplug ports which hardwire
|
|
* Presence Detect State to zero, such as Wilocity's [1ae9:0200].
|
|
*
|
|
* Returns: %1 if the slot is occupied and %0 if it is not. If the hotplug
|
|
* port is not present anymore returns %-ENODEV.
|
|
*/
|
|
int pciehp_card_present_or_link_active(struct controller *ctrl)
|
|
{
|
|
int ret;
|
|
|
|
ret = pciehp_card_present(ctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pciehp_check_link_active(ctrl);
|
|
}
|
|
|
|
int pciehp_query_power_fault(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
|
|
}
|
|
|
|
int pciehp_set_raw_indicator_status(struct hotplug_slot *hotplug_slot,
|
|
u8 status)
|
|
{
|
|
struct controller *ctrl = to_ctrl(hotplug_slot);
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
|
|
pci_config_pm_runtime_get(pdev);
|
|
pcie_write_cmd_nowait(ctrl, status << 6,
|
|
PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC);
|
|
pci_config_pm_runtime_put(pdev);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pciehp_set_indicators() - set attention indicator, power indicator, or both
|
|
* @ctrl: PCIe hotplug controller
|
|
* @pwr: one of:
|
|
* PCI_EXP_SLTCTL_PWR_IND_ON
|
|
* PCI_EXP_SLTCTL_PWR_IND_BLINK
|
|
* PCI_EXP_SLTCTL_PWR_IND_OFF
|
|
* @attn: one of:
|
|
* PCI_EXP_SLTCTL_ATTN_IND_ON
|
|
* PCI_EXP_SLTCTL_ATTN_IND_BLINK
|
|
* PCI_EXP_SLTCTL_ATTN_IND_OFF
|
|
*
|
|
* Either @pwr or @attn can also be INDICATOR_NOOP to leave that indicator
|
|
* unchanged.
|
|
*/
|
|
void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn)
|
|
{
|
|
u16 cmd = 0, mask = 0;
|
|
|
|
if (PWR_LED(ctrl) && pwr != INDICATOR_NOOP) {
|
|
cmd |= (pwr & PCI_EXP_SLTCTL_PIC);
|
|
mask |= PCI_EXP_SLTCTL_PIC;
|
|
}
|
|
|
|
if (ATTN_LED(ctrl) && attn != INDICATOR_NOOP) {
|
|
cmd |= (attn & PCI_EXP_SLTCTL_AIC);
|
|
mask |= PCI_EXP_SLTCTL_AIC;
|
|
}
|
|
|
|
if (cmd) {
|
|
pcie_write_cmd_nowait(ctrl, cmd, mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
|
|
}
|
|
}
|
|
|
|
int pciehp_power_on_slot(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
int retval;
|
|
|
|
/* Clear power-fault bit from previous power failures */
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status & PCI_EXP_SLTSTA_PFD)
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_PFD);
|
|
ctrl->power_fault_detected = 0;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_ON);
|
|
|
|
retval = pciehp_link_enable(ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "%s: Can not enable the link!\n", __func__);
|
|
|
|
return retval;
|
|
}
|
|
|
|
void pciehp_power_off_slot(struct controller *ctrl)
|
|
{
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_OFF);
|
|
}
|
|
|
|
static void pciehp_ignore_dpc_link_change(struct controller *ctrl,
|
|
struct pci_dev *pdev, int irq)
|
|
{
|
|
/*
|
|
* Ignore link changes which occurred while waiting for DPC recovery.
|
|
* Could be several if DPC triggered multiple times consecutively.
|
|
*/
|
|
synchronize_hardirq(irq);
|
|
atomic_and(~PCI_EXP_SLTSTA_DLLSC, &ctrl->pending_events);
|
|
if (pciehp_poll_mode)
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_DLLSC);
|
|
ctrl_info(ctrl, "Slot(%s): Link Down/Up ignored (recovered by DPC)\n",
|
|
slot_name(ctrl));
|
|
|
|
/*
|
|
* If the link is unexpectedly down after successful recovery,
|
|
* the corresponding link change may have been ignored above.
|
|
* Synthesize it to ensure that it is acted on.
|
|
*/
|
|
down_read_nested(&ctrl->reset_lock, ctrl->depth);
|
|
if (!pciehp_check_link_active(ctrl))
|
|
pciehp_request(ctrl, PCI_EXP_SLTSTA_DLLSC);
|
|
up_read(&ctrl->reset_lock);
|
|
}
|
|
|
|
static irqreturn_t pciehp_isr(int irq, void *dev_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *)dev_id;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
struct device *parent = pdev->dev.parent;
|
|
u16 status, events = 0;
|
|
|
|
/*
|
|
* Interrupts only occur in D3hot or shallower and only if enabled
|
|
* in the Slot Control register (PCIe r4.0, sec 6.7.3.4).
|
|
*/
|
|
if (pdev->current_state == PCI_D3cold ||
|
|
(!(ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE) && !pciehp_poll_mode))
|
|
return IRQ_NONE;
|
|
|
|
/*
|
|
* Keep the port accessible by holding a runtime PM ref on its parent.
|
|
* Defer resume of the parent to the IRQ thread if it's suspended.
|
|
* Mask the interrupt until then.
|
|
*/
|
|
if (parent) {
|
|
pm_runtime_get_noresume(parent);
|
|
if (!pm_runtime_active(parent)) {
|
|
pm_runtime_put(parent);
|
|
disable_irq_nosync(irq);
|
|
atomic_or(RERUN_ISR, &ctrl->pending_events);
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
}
|
|
|
|
read_status:
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
|
|
if (PCI_POSSIBLE_ERROR(status)) {
|
|
ctrl_info(ctrl, "%s: no response from device\n", __func__);
|
|
if (parent)
|
|
pm_runtime_put(parent);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/*
|
|
* Slot Status contains plain status bits as well as event
|
|
* notification bits; right now we only want the event bits.
|
|
*/
|
|
status &= PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_CC |
|
|
PCI_EXP_SLTSTA_DLLSC;
|
|
|
|
/*
|
|
* If we've already reported a power fault, don't report it again
|
|
* until we've done something to handle it.
|
|
*/
|
|
if (ctrl->power_fault_detected)
|
|
status &= ~PCI_EXP_SLTSTA_PFD;
|
|
else if (status & PCI_EXP_SLTSTA_PFD)
|
|
ctrl->power_fault_detected = true;
|
|
|
|
events |= status;
|
|
if (!events) {
|
|
if (parent)
|
|
pm_runtime_put(parent);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (status) {
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, status);
|
|
|
|
/*
|
|
* In MSI mode, all event bits must be zero before the port
|
|
* will send a new interrupt (PCIe Base Spec r5.0 sec 6.7.3.4).
|
|
* So re-read the Slot Status register in case a bit was set
|
|
* between read and write.
|
|
*/
|
|
if (pci_dev_msi_enabled(pdev) && !pciehp_poll_mode)
|
|
goto read_status;
|
|
}
|
|
|
|
ctrl_dbg(ctrl, "pending interrupts %#06x from Slot Status\n", events);
|
|
if (parent)
|
|
pm_runtime_put(parent);
|
|
|
|
/*
|
|
* Command Completed notifications are not deferred to the
|
|
* IRQ thread because it may be waiting for their arrival.
|
|
*/
|
|
if (events & PCI_EXP_SLTSTA_CC) {
|
|
ctrl->cmd_busy = 0;
|
|
smp_mb();
|
|
wake_up(&ctrl->queue);
|
|
|
|
if (events == PCI_EXP_SLTSTA_CC)
|
|
return IRQ_HANDLED;
|
|
|
|
events &= ~PCI_EXP_SLTSTA_CC;
|
|
}
|
|
|
|
if (pdev->ignore_hotplug) {
|
|
ctrl_dbg(ctrl, "ignoring hotplug event %#06x\n", events);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Save pending events for consumption by IRQ thread. */
|
|
atomic_or(events, &ctrl->pending_events);
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static irqreturn_t pciehp_ist(int irq, void *dev_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *)dev_id;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
irqreturn_t ret;
|
|
u32 events;
|
|
|
|
ctrl->ist_running = true;
|
|
pci_config_pm_runtime_get(pdev);
|
|
|
|
/* rerun pciehp_isr() if the port was inaccessible on interrupt */
|
|
if (atomic_fetch_and(~RERUN_ISR, &ctrl->pending_events) & RERUN_ISR) {
|
|
ret = pciehp_isr(irq, dev_id);
|
|
enable_irq(irq);
|
|
if (ret != IRQ_WAKE_THREAD)
|
|
goto out;
|
|
}
|
|
|
|
synchronize_hardirq(irq);
|
|
events = atomic_xchg(&ctrl->pending_events, 0);
|
|
if (!events) {
|
|
ret = IRQ_NONE;
|
|
goto out;
|
|
}
|
|
|
|
/* Check Attention Button Pressed */
|
|
if (events & PCI_EXP_SLTSTA_ABP) {
|
|
ctrl_info(ctrl, "Slot(%s): Attention button pressed\n",
|
|
slot_name(ctrl));
|
|
pciehp_handle_button_press(ctrl);
|
|
}
|
|
|
|
/* Check Power Fault Detected */
|
|
if (events & PCI_EXP_SLTSTA_PFD) {
|
|
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
|
|
pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
|
|
PCI_EXP_SLTCTL_ATTN_IND_ON);
|
|
}
|
|
|
|
/*
|
|
* Ignore Link Down/Up events caused by Downstream Port Containment
|
|
* if recovery from the error succeeded.
|
|
*/
|
|
if ((events & PCI_EXP_SLTSTA_DLLSC) && pci_dpc_recovered(pdev) &&
|
|
ctrl->state == ON_STATE) {
|
|
events &= ~PCI_EXP_SLTSTA_DLLSC;
|
|
pciehp_ignore_dpc_link_change(ctrl, pdev, irq);
|
|
}
|
|
|
|
/*
|
|
* Disable requests have higher priority than Presence Detect Changed
|
|
* or Data Link Layer State Changed events.
|
|
*/
|
|
down_read_nested(&ctrl->reset_lock, ctrl->depth);
|
|
if (events & DISABLE_SLOT)
|
|
pciehp_handle_disable_request(ctrl);
|
|
else if (events & (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC))
|
|
pciehp_handle_presence_or_link_change(ctrl, events);
|
|
up_read(&ctrl->reset_lock);
|
|
|
|
ret = IRQ_HANDLED;
|
|
out:
|
|
pci_config_pm_runtime_put(pdev);
|
|
ctrl->ist_running = false;
|
|
wake_up(&ctrl->requester);
|
|
return ret;
|
|
}
|
|
|
|
static int pciehp_poll(void *data)
|
|
{
|
|
struct controller *ctrl = data;
|
|
|
|
schedule_timeout_idle(10 * HZ); /* start with 10 sec delay */
|
|
|
|
while (!kthread_should_stop()) {
|
|
/* poll for interrupt events or user requests */
|
|
while (pciehp_isr(IRQ_NOTCONNECTED, ctrl) == IRQ_WAKE_THREAD ||
|
|
atomic_read(&ctrl->pending_events))
|
|
pciehp_ist(IRQ_NOTCONNECTED, ctrl);
|
|
|
|
if (pciehp_poll_time <= 0 || pciehp_poll_time > 60)
|
|
pciehp_poll_time = 2; /* clamp to sane value */
|
|
|
|
schedule_timeout_idle(pciehp_poll_time * HZ);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_enable_notification(struct controller *ctrl)
|
|
{
|
|
u16 cmd, mask;
|
|
|
|
/*
|
|
* TBD: Power fault detected software notification support.
|
|
*
|
|
* Power fault detected software notification is not enabled
|
|
* now, because it caused power fault detected interrupt storm
|
|
* on some machines. On those machines, power fault detected
|
|
* bit in the slot status register was set again immediately
|
|
* when it is cleared in the interrupt service routine, and
|
|
* next power fault detected interrupt was notified again.
|
|
*/
|
|
|
|
/*
|
|
* Always enable link events: thus link-up and link-down shall
|
|
* always be treated as hotplug and unplug respectively. Enable
|
|
* presence detect only if Attention Button is not present.
|
|
*/
|
|
cmd = PCI_EXP_SLTCTL_DLLSCE;
|
|
if (ATTN_BUTTN(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_ABPE;
|
|
else
|
|
cmd |= PCI_EXP_SLTCTL_PDCE;
|
|
if (!pciehp_poll_mode)
|
|
cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
|
|
PCI_EXP_SLTCTL_DLLSCE);
|
|
|
|
pcie_write_cmd_nowait(ctrl, cmd, mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
|
|
}
|
|
|
|
static void pcie_disable_notification(struct controller *ctrl)
|
|
{
|
|
u16 mask;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
|
|
PCI_EXP_SLTCTL_DLLSCE);
|
|
pcie_write_cmd(ctrl, 0, mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
|
|
}
|
|
|
|
void pcie_clear_hotplug_events(struct controller *ctrl)
|
|
{
|
|
pcie_capability_write_word(ctrl_dev(ctrl), PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
|
|
}
|
|
|
|
void pcie_enable_interrupt(struct controller *ctrl)
|
|
{
|
|
u16 mask;
|
|
|
|
mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE;
|
|
pcie_write_cmd(ctrl, mask, mask);
|
|
}
|
|
|
|
void pcie_disable_interrupt(struct controller *ctrl)
|
|
{
|
|
u16 mask;
|
|
|
|
/*
|
|
* Mask hot-plug interrupt to prevent it triggering immediately
|
|
* when the link goes inactive (we still get PME when any of the
|
|
* enabled events is detected). Same goes with Link Layer State
|
|
* changed event which generates PME immediately when the link goes
|
|
* inactive so mask it as well.
|
|
*/
|
|
mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE;
|
|
pcie_write_cmd(ctrl, 0, mask);
|
|
}
|
|
|
|
/**
|
|
* pciehp_slot_reset() - ignore link event caused by error-induced hot reset
|
|
* @dev: PCI Express port service device
|
|
*
|
|
* Called from pcie_portdrv_slot_reset() after AER or DPC initiated a reset
|
|
* further up in the hierarchy to recover from an error. The reset was
|
|
* propagated down to this hotplug port. Ignore the resulting link flap.
|
|
* If the link failed to retrain successfully, synthesize the ignored event.
|
|
* Surprise removal during reset is detected through Presence Detect Changed.
|
|
*/
|
|
int pciehp_slot_reset(struct pcie_device *dev)
|
|
{
|
|
struct controller *ctrl = get_service_data(dev);
|
|
|
|
if (ctrl->state != ON_STATE)
|
|
return 0;
|
|
|
|
pcie_capability_write_word(dev->port, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_DLLSC);
|
|
|
|
if (!pciehp_check_link_active(ctrl))
|
|
pciehp_request(ctrl, PCI_EXP_SLTSTA_DLLSC);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
|
|
* bus reset of the bridge, but at the same time we want to ensure that it is
|
|
* not seen as a hot-unplug, followed by the hot-plug of the device. Thus,
|
|
* disable link state notification and presence detection change notification
|
|
* momentarily, if we see that they could interfere. Also, clear any spurious
|
|
* events after.
|
|
*/
|
|
int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, bool probe)
|
|
{
|
|
struct controller *ctrl = to_ctrl(hotplug_slot);
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 stat_mask = 0, ctrl_mask = 0;
|
|
int rc;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
down_write_nested(&ctrl->reset_lock, ctrl->depth);
|
|
|
|
if (!ATTN_BUTTN(ctrl)) {
|
|
ctrl_mask |= PCI_EXP_SLTCTL_PDCE;
|
|
stat_mask |= PCI_EXP_SLTSTA_PDC;
|
|
}
|
|
ctrl_mask |= PCI_EXP_SLTCTL_DLLSCE;
|
|
stat_mask |= PCI_EXP_SLTSTA_DLLSC;
|
|
|
|
pcie_write_cmd(ctrl, 0, ctrl_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0);
|
|
|
|
rc = pci_bridge_secondary_bus_reset(ctrl->pcie->port);
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask);
|
|
pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask);
|
|
|
|
up_write(&ctrl->reset_lock);
|
|
return rc;
|
|
}
|
|
|
|
int pcie_init_notification(struct controller *ctrl)
|
|
{
|
|
if (pciehp_request_irq(ctrl))
|
|
return -1;
|
|
pcie_enable_notification(ctrl);
|
|
ctrl->notification_enabled = 1;
|
|
return 0;
|
|
}
|
|
|
|
void pcie_shutdown_notification(struct controller *ctrl)
|
|
{
|
|
if (ctrl->notification_enabled) {
|
|
pcie_disable_notification(ctrl);
|
|
pciehp_free_irq(ctrl);
|
|
ctrl->notification_enabled = 0;
|
|
}
|
|
}
|
|
|
|
static inline void dbg_ctrl(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl->pcie->port;
|
|
u16 reg16;
|
|
|
|
ctrl_dbg(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, ®16);
|
|
ctrl_dbg(ctrl, "Slot Status : 0x%04x\n", reg16);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, ®16);
|
|
ctrl_dbg(ctrl, "Slot Control : 0x%04x\n", reg16);
|
|
}
|
|
|
|
#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
|
|
|
|
static inline int pcie_hotplug_depth(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *bus = dev->bus;
|
|
int depth = 0;
|
|
|
|
while (bus->parent) {
|
|
bus = bus->parent;
|
|
if (bus->self && bus->self->is_hotplug_bridge)
|
|
depth++;
|
|
}
|
|
|
|
return depth;
|
|
}
|
|
|
|
struct controller *pcie_init(struct pcie_device *dev)
|
|
{
|
|
struct controller *ctrl;
|
|
u32 slot_cap, slot_cap2, link_cap;
|
|
u8 poweron;
|
|
struct pci_dev *pdev = dev->port;
|
|
struct pci_bus *subordinate = pdev->subordinate;
|
|
|
|
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
|
|
if (!ctrl)
|
|
return NULL;
|
|
|
|
ctrl->pcie = dev;
|
|
ctrl->depth = pcie_hotplug_depth(dev->port);
|
|
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
|
|
|
|
if (pdev->hotplug_user_indicators)
|
|
slot_cap &= ~(PCI_EXP_SLTCAP_AIP | PCI_EXP_SLTCAP_PIP);
|
|
|
|
/*
|
|
* We assume no Thunderbolt controllers support Command Complete events,
|
|
* but some controllers falsely claim they do.
|
|
*/
|
|
if (pdev->is_thunderbolt)
|
|
slot_cap |= PCI_EXP_SLTCAP_NCCS;
|
|
|
|
ctrl->slot_cap = slot_cap;
|
|
mutex_init(&ctrl->ctrl_lock);
|
|
mutex_init(&ctrl->state_lock);
|
|
init_rwsem(&ctrl->reset_lock);
|
|
init_waitqueue_head(&ctrl->requester);
|
|
init_waitqueue_head(&ctrl->queue);
|
|
INIT_DELAYED_WORK(&ctrl->button_work, pciehp_queue_pushbutton_work);
|
|
dbg_ctrl(ctrl);
|
|
|
|
down_read(&pci_bus_sem);
|
|
ctrl->state = list_empty(&subordinate->devices) ? OFF_STATE : ON_STATE;
|
|
up_read(&pci_bus_sem);
|
|
|
|
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
|
|
if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
|
|
pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
|
|
PCI_EXP_SLTCTL_IBPD_DISABLE);
|
|
ctrl->inband_presence_disabled = 1;
|
|
}
|
|
|
|
if (dmi_first_match(inband_presence_disabled_dmi_table))
|
|
ctrl->inband_presence_disabled = 1;
|
|
|
|
/* Check if Data Link Layer Link Active Reporting is implemented */
|
|
pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
|
|
|
|
/* Clear all remaining event bits in Slot Status register. */
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC |
|
|
PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC);
|
|
|
|
ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c IbPresDis%c LLActRep%c%s\n",
|
|
(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_MRLSP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_AIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_PIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_HPC),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_HPS),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_EIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS),
|
|
FLAG(slot_cap2, PCI_EXP_SLTCAP2_IBPD),
|
|
FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
|
|
pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
|
|
|
|
/*
|
|
* If empty slot's power status is on, turn power off. The IRQ isn't
|
|
* requested yet, so avoid triggering a notification with this command.
|
|
*/
|
|
if (POWER_CTRL(ctrl)) {
|
|
pciehp_get_power_status(ctrl, &poweron);
|
|
if (!pciehp_card_present_or_link_active(ctrl) && poweron) {
|
|
pcie_disable_notification(ctrl);
|
|
pciehp_power_off_slot(ctrl);
|
|
}
|
|
}
|
|
|
|
return ctrl;
|
|
}
|
|
|
|
void pciehp_release_ctrl(struct controller *ctrl)
|
|
{
|
|
cancel_delayed_work_sync(&ctrl->button_work);
|
|
kfree(ctrl);
|
|
}
|
|
|
|
static void quirk_cmd_compl(struct pci_dev *pdev)
|
|
{
|
|
u32 slot_cap;
|
|
|
|
if (pci_is_pcie(pdev)) {
|
|
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
|
|
if (slot_cap & PCI_EXP_SLTCAP_HPC &&
|
|
!(slot_cap & PCI_EXP_SLTCAP_NCCS))
|
|
pdev->broken_cmd_compl = 1;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0110,
|
|
PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0400,
|
|
PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0401,
|
|
PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_HXT, 0x0401,
|
|
PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
|