mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
cd9a0b6bd6
* 'next/pm' of git://git.linaro.org/people/arnd/arm-soc: (66 commits) ARM: CSR: PM: use outer_resume to resume L2 cache ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n ARM: CSR: PM: add sleep entry for SiRFprimaII ARM: CSR: PM: save/restore irq status in suspend cycle ARM: CSR: PM: save/restore timer status in suspend cycle OMAP4: PM: TWL6030: add cmd register OMAP4: PM: TWL6030: fix ON/RET/OFF voltages OMAP4: PM: TWL6030: address 0V conversions OMAP4: PM: TWL6030: fix uv to voltage for >0x39 OMAP4: PM: TWL6030: fix voltage conversion formula omap: voltage: add a stub header file for external/regulator use OMAP2+: VC: more registers are per-channel starting with OMAP5 OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage OMAP3+: voltdm: final removal of omap_vdd_info OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix OMAP3+: VP: combine setting init voltage into common function OMAP3+: VP: remove unused omap_vp_get_curr_volt() ... Fix up trivial conflict in arch/arm/mach-prima2/l2x0.c (code removal vs edit)
271 lines
8.9 KiB
Makefile
271 lines
8.9 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support
|
|
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
|
|
common.o gpio.o dma.o wd_timer.o
|
|
|
|
omap-2-3-common = irq.o sdrc.o
|
|
hwmod-common = omap_hwmod.o \
|
|
omap_hwmod_common_data.o
|
|
clock-common = clock.o clock_common_data.o \
|
|
clkt_dpll.o clkt_clksel.o
|
|
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
|
|
|
|
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
|
|
|
|
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
|
|
|
|
# SMP support ONLY available for OMAP4
|
|
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
|
|
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
|
|
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
|
|
|
|
plus_sec := $(call as-instr,.arch_extension sec,+sec)
|
|
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
# Functions loaded to SRAM
|
|
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
|
|
|
|
AFLAGS_sram242x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram243x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
|
|
|
|
# Pin multiplexing
|
|
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
|
|
|
|
# SMS/SDRC
|
|
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
|
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
|
|
|
# OPP table initialization
|
|
ifeq ($(CONFIG_PM_OPP),y)
|
|
obj-y += opp.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
|
|
endif
|
|
|
|
# Power Management
|
|
ifeq ($(CONFIG_PM),y)
|
|
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
|
|
cpuidle34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
|
|
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
|
|
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
|
|
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
|
|
|
|
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
|
|
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
ifeq ($(CONFIG_PM_VERBOSE),y)
|
|
CFLAGS_pm_bus.o += -DDEBUG
|
|
endif
|
|
|
|
endif
|
|
|
|
# PRCM
|
|
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
|
|
vc3xxx_data.o vp3xxx_data.o
|
|
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
|
|
# will be removed once the OMAP4 part of the codebase is converted to
|
|
# use OMAP4-specific PRCM functions.
|
|
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
|
|
cm44xx.o prcm_mpu44xx.o \
|
|
prminst44xx.o vc44xx_data.o \
|
|
vp44xx_data.o
|
|
|
|
# OMAP voltage domains
|
|
voltagedomain-common := voltage.o vc.o vp.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
|
|
voltagedomains2xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
|
|
voltagedomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
|
|
voltagedomains44xx_data.o
|
|
|
|
# OMAP powerdomain framework
|
|
powerdomain-common += powerdomain.o powerdomain-common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
|
|
powerdomain2xxx_3xxx.o \
|
|
powerdomains2xxx_data.o \
|
|
powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
|
|
powerdomain2xxx_3xxx.o \
|
|
powerdomains3xxx_data.o \
|
|
powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
|
|
powerdomain44xx.o \
|
|
powerdomains44xx_data.o
|
|
|
|
# PRCM clockdomain control
|
|
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
|
|
clockdomain2xxx_3xxx.o \
|
|
clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
|
|
clockdomain2xxx_3xxx.o \
|
|
clockdomains2xxx_3xxx_data.o \
|
|
clockdomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
|
|
clockdomain44xx.o \
|
|
clockdomains44xx_data.o
|
|
|
|
# Clock framework
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
|
|
clkt2xxx_sys.o \
|
|
clkt2xxx_dpllcore.o \
|
|
clkt2xxx_virt_prcm_set.o \
|
|
clkt2xxx_apll.o clkt2xxx_osc.o \
|
|
clkt2xxx_dpll.o clkt_iclk.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
|
|
clock34xx.o clkt34xx_dpll3m2.o \
|
|
clock3517.o clock36xx.o \
|
|
dpll3xxx.o clock3xxx_data.o \
|
|
clkt_iclk.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
|
|
dpll3xxx.o dpll44xx.o
|
|
|
|
# OMAP2 clock rate set data (old "OPP" data)
|
|
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
|
|
|
|
# hwmod data
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_3xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_interconnect_data.o \
|
|
omap_hwmod_2xxx_3xxx_interconnect_data.o \
|
|
omap_hwmod_2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_3xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_interconnect_data.o \
|
|
omap_hwmod_2xxx_3xxx_interconnect_data.o \
|
|
omap_hwmod_2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \
|
|
omap_hwmod_2xxx_3xxx_interconnect_data.o \
|
|
omap_hwmod_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
|
|
|
|
# EMU peripherals
|
|
obj-$(CONFIG_OMAP3_EMU) += emu.o
|
|
|
|
# L3 interconnect
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
|
|
|
|
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
|
|
mailbox_mach-objs := mailbox.o
|
|
|
|
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
|
|
|
|
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
|
|
obj-y += $(iommu-m) $(iommu-y)
|
|
|
|
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
|
|
obj-y += $(i2c-omap-m) $(i2c-omap-y)
|
|
|
|
ifneq ($(CONFIG_TIDSPBRIDGE),)
|
|
obj-y += dsp.o
|
|
endif
|
|
|
|
# Specific board support
|
|
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
|
|
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
|
|
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
|
|
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
|
|
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
|
|
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
|
|
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
|
|
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
|
|
obj-$(CONFIG_MACH_OVERO) += board-overo.o
|
|
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
|
|
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
|
|
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
|
|
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
|
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
|
|
sdram-nokia.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
|
sdram-nokia.o \
|
|
board-rx51-peripherals.o \
|
|
board-rx51-video.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
|
|
board-zoom-peripherals.o \
|
|
board-zoom-display.o
|
|
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
|
|
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
|
|
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
|
|
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
|
|
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
|
|
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
|
|
|
|
obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
|
|
|
|
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
|
|
|
|
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
|
|
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
|
|
|
|
# Platform specific device init code
|
|
|
|
omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
|
|
omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
|
|
obj-y += $(omap-flash-y) $(omap-flash-m)
|
|
|
|
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
|
|
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
|
|
|
|
|
|
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
|
|
obj-y += $(usbfs-m) $(usbfs-y)
|
|
obj-y += usb-musb.o
|
|
obj-y += omap_phy_internal.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
|
obj-y += usb-host.o
|
|
|
|
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
|
obj-y += $(onenand-m) $(onenand-y)
|
|
|
|
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
|
|
obj-y += $(nand-m) $(nand-y)
|
|
|
|
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
|
|
obj-y += $(smc91x-m) $(smc91x-y)
|
|
|
|
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
|
|
obj-y += $(smsc911x-m) $(smsc911x-y)
|
|
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
|
|
|
|
disp-$(CONFIG_OMAP2_DSS) := display.o
|
|
obj-y += $(disp-m) $(disp-y)
|
|
|
|
obj-y += common-board-devices.o twl-common.o
|