mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
a4b7619377
Some high speed capable controllers forget to set the high speed capability bit. Make sure we enable the functionality anyway. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
289 lines
8.8 KiB
C
289 lines
8.8 KiB
C
/*
|
|
* linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
|
|
*
|
|
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
#include <linux/scatterlist.h>
|
|
|
|
/*
|
|
* Controller registers
|
|
*/
|
|
|
|
#define SDHCI_DMA_ADDRESS 0x00
|
|
|
|
#define SDHCI_BLOCK_SIZE 0x04
|
|
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
|
|
|
|
#define SDHCI_BLOCK_COUNT 0x06
|
|
|
|
#define SDHCI_ARGUMENT 0x08
|
|
|
|
#define SDHCI_TRANSFER_MODE 0x0C
|
|
#define SDHCI_TRNS_DMA 0x01
|
|
#define SDHCI_TRNS_BLK_CNT_EN 0x02
|
|
#define SDHCI_TRNS_ACMD12 0x04
|
|
#define SDHCI_TRNS_READ 0x10
|
|
#define SDHCI_TRNS_MULTI 0x20
|
|
|
|
#define SDHCI_COMMAND 0x0E
|
|
#define SDHCI_CMD_RESP_MASK 0x03
|
|
#define SDHCI_CMD_CRC 0x08
|
|
#define SDHCI_CMD_INDEX 0x10
|
|
#define SDHCI_CMD_DATA 0x20
|
|
|
|
#define SDHCI_CMD_RESP_NONE 0x00
|
|
#define SDHCI_CMD_RESP_LONG 0x01
|
|
#define SDHCI_CMD_RESP_SHORT 0x02
|
|
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
|
|
|
|
#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
|
|
|
|
#define SDHCI_RESPONSE 0x10
|
|
|
|
#define SDHCI_BUFFER 0x20
|
|
|
|
#define SDHCI_PRESENT_STATE 0x24
|
|
#define SDHCI_CMD_INHIBIT 0x00000001
|
|
#define SDHCI_DATA_INHIBIT 0x00000002
|
|
#define SDHCI_DOING_WRITE 0x00000100
|
|
#define SDHCI_DOING_READ 0x00000200
|
|
#define SDHCI_SPACE_AVAILABLE 0x00000400
|
|
#define SDHCI_DATA_AVAILABLE 0x00000800
|
|
#define SDHCI_CARD_PRESENT 0x00010000
|
|
#define SDHCI_WRITE_PROTECT 0x00080000
|
|
|
|
#define SDHCI_HOST_CONTROL 0x28
|
|
#define SDHCI_CTRL_LED 0x01
|
|
#define SDHCI_CTRL_4BITBUS 0x02
|
|
#define SDHCI_CTRL_HISPD 0x04
|
|
#define SDHCI_CTRL_DMA_MASK 0x18
|
|
#define SDHCI_CTRL_SDMA 0x00
|
|
#define SDHCI_CTRL_ADMA1 0x08
|
|
#define SDHCI_CTRL_ADMA32 0x10
|
|
#define SDHCI_CTRL_ADMA64 0x18
|
|
|
|
#define SDHCI_POWER_CONTROL 0x29
|
|
#define SDHCI_POWER_ON 0x01
|
|
#define SDHCI_POWER_180 0x0A
|
|
#define SDHCI_POWER_300 0x0C
|
|
#define SDHCI_POWER_330 0x0E
|
|
|
|
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
|
|
|
|
#define SDHCI_WAKE_UP_CONTROL 0x2B
|
|
|
|
#define SDHCI_CLOCK_CONTROL 0x2C
|
|
#define SDHCI_DIVIDER_SHIFT 8
|
|
#define SDHCI_CLOCK_CARD_EN 0x0004
|
|
#define SDHCI_CLOCK_INT_STABLE 0x0002
|
|
#define SDHCI_CLOCK_INT_EN 0x0001
|
|
|
|
#define SDHCI_TIMEOUT_CONTROL 0x2E
|
|
|
|
#define SDHCI_SOFTWARE_RESET 0x2F
|
|
#define SDHCI_RESET_ALL 0x01
|
|
#define SDHCI_RESET_CMD 0x02
|
|
#define SDHCI_RESET_DATA 0x04
|
|
|
|
#define SDHCI_INT_STATUS 0x30
|
|
#define SDHCI_INT_ENABLE 0x34
|
|
#define SDHCI_SIGNAL_ENABLE 0x38
|
|
#define SDHCI_INT_RESPONSE 0x00000001
|
|
#define SDHCI_INT_DATA_END 0x00000002
|
|
#define SDHCI_INT_DMA_END 0x00000008
|
|
#define SDHCI_INT_SPACE_AVAIL 0x00000010
|
|
#define SDHCI_INT_DATA_AVAIL 0x00000020
|
|
#define SDHCI_INT_CARD_INSERT 0x00000040
|
|
#define SDHCI_INT_CARD_REMOVE 0x00000080
|
|
#define SDHCI_INT_CARD_INT 0x00000100
|
|
#define SDHCI_INT_ERROR 0x00008000
|
|
#define SDHCI_INT_TIMEOUT 0x00010000
|
|
#define SDHCI_INT_CRC 0x00020000
|
|
#define SDHCI_INT_END_BIT 0x00040000
|
|
#define SDHCI_INT_INDEX 0x00080000
|
|
#define SDHCI_INT_DATA_TIMEOUT 0x00100000
|
|
#define SDHCI_INT_DATA_CRC 0x00200000
|
|
#define SDHCI_INT_DATA_END_BIT 0x00400000
|
|
#define SDHCI_INT_BUS_POWER 0x00800000
|
|
#define SDHCI_INT_ACMD12ERR 0x01000000
|
|
#define SDHCI_INT_ADMA_ERROR 0x02000000
|
|
|
|
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
|
|
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
|
|
|
|
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
|
|
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
|
|
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
|
|
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
|
|
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
|
|
SDHCI_INT_DATA_END_BIT)
|
|
|
|
#define SDHCI_ACMD12_ERR 0x3C
|
|
|
|
/* 3E-3F reserved */
|
|
|
|
#define SDHCI_CAPABILITIES 0x40
|
|
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
|
|
#define SDHCI_TIMEOUT_CLK_SHIFT 0
|
|
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
|
|
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
|
|
#define SDHCI_CLOCK_BASE_SHIFT 8
|
|
#define SDHCI_MAX_BLOCK_MASK 0x00030000
|
|
#define SDHCI_MAX_BLOCK_SHIFT 16
|
|
#define SDHCI_CAN_DO_ADMA2 0x00080000
|
|
#define SDHCI_CAN_DO_ADMA1 0x00100000
|
|
#define SDHCI_CAN_DO_HISPD 0x00200000
|
|
#define SDHCI_CAN_DO_DMA 0x00400000
|
|
#define SDHCI_CAN_VDD_330 0x01000000
|
|
#define SDHCI_CAN_VDD_300 0x02000000
|
|
#define SDHCI_CAN_VDD_180 0x04000000
|
|
#define SDHCI_CAN_64BIT 0x10000000
|
|
|
|
/* 44-47 reserved for more caps */
|
|
|
|
#define SDHCI_MAX_CURRENT 0x48
|
|
|
|
/* 4C-4F reserved for more max current */
|
|
|
|
#define SDHCI_SET_ACMD12_ERROR 0x50
|
|
#define SDHCI_SET_INT_ERROR 0x52
|
|
|
|
#define SDHCI_ADMA_ERROR 0x54
|
|
|
|
/* 55-57 reserved */
|
|
|
|
#define SDHCI_ADMA_ADDRESS 0x58
|
|
|
|
/* 60-FB reserved */
|
|
|
|
#define SDHCI_SLOT_INT_STATUS 0xFC
|
|
|
|
#define SDHCI_HOST_VERSION 0xFE
|
|
#define SDHCI_VENDOR_VER_MASK 0xFF00
|
|
#define SDHCI_VENDOR_VER_SHIFT 8
|
|
#define SDHCI_SPEC_VER_MASK 0x00FF
|
|
#define SDHCI_SPEC_VER_SHIFT 0
|
|
#define SDHCI_SPEC_100 0
|
|
#define SDHCI_SPEC_200 1
|
|
|
|
struct sdhci_ops;
|
|
|
|
struct sdhci_host {
|
|
/* Data set by hardware interface driver */
|
|
const char *hw_name; /* Hardware bus name */
|
|
|
|
unsigned int quirks; /* Deviations from spec. */
|
|
|
|
/* Controller doesn't honor resets unless we touch the clock register */
|
|
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
|
|
/* Controller has bad caps bits, but really supports DMA */
|
|
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
|
|
/* Controller doesn't like to be reset when there is no card inserted. */
|
|
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
|
|
/* Controller doesn't like clearing the power reg before a change */
|
|
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
|
|
/* Controller has flaky internal state so reset it on each ios change */
|
|
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
|
|
/* Controller has an unusable DMA engine */
|
|
#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
|
|
/* Controller has an unusable ADMA engine */
|
|
#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
|
|
/* Controller can only DMA from 32-bit aligned addresses */
|
|
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
|
|
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
|
|
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
|
|
/* Controller can only ADMA chunks that are a multiple of 32 bits */
|
|
#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
|
|
/* Controller needs to be reset after each request to stay stable */
|
|
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
|
|
/* Controller needs voltage and power writes to happen separately */
|
|
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
|
|
/* Controller provides an incorrect timeout value for transfers */
|
|
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
|
|
/* Controller has an issue with buffer bits for small transfers */
|
|
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
|
|
/* Controller supports high speed but doesn't have the caps bit set */
|
|
#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
|
|
|
|
int irq; /* Device IRQ */
|
|
void __iomem * ioaddr; /* Mapped address */
|
|
|
|
const struct sdhci_ops *ops; /* Low level hw interface */
|
|
|
|
/* Internal data */
|
|
struct mmc_host *mmc; /* MMC structure */
|
|
u64 dma_mask; /* custom DMA mask */
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
struct led_classdev led; /* LED control */
|
|
#endif
|
|
|
|
spinlock_t lock; /* Mutex */
|
|
|
|
int flags; /* Host attributes */
|
|
#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
|
|
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
|
|
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
|
|
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
|
|
|
|
unsigned int version; /* SDHCI spec. version */
|
|
|
|
unsigned int max_clk; /* Max possible freq (MHz) */
|
|
unsigned int timeout_clk; /* Timeout freq (KHz) */
|
|
|
|
unsigned int clock; /* Current clock (MHz) */
|
|
unsigned short power; /* Current voltage */
|
|
|
|
struct mmc_request *mrq; /* Current request */
|
|
struct mmc_command *cmd; /* Current command */
|
|
struct mmc_data *data; /* Current data request */
|
|
unsigned int data_early:1; /* Data finished before cmd */
|
|
|
|
struct sg_mapping_iter sg_miter; /* SG state for PIO */
|
|
unsigned int blocks; /* remaining PIO blocks */
|
|
|
|
int sg_count; /* Mapped sg entries */
|
|
|
|
u8 *adma_desc; /* ADMA descriptor table */
|
|
u8 *align_buffer; /* Bounce buffer */
|
|
|
|
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
|
|
dma_addr_t align_addr; /* Mapped bounce buffer */
|
|
|
|
struct tasklet_struct card_tasklet; /* Tasklet structures */
|
|
struct tasklet_struct finish_tasklet;
|
|
|
|
struct timer_list timer; /* Timer for timeouts */
|
|
|
|
unsigned long private[0] ____cacheline_aligned;
|
|
};
|
|
|
|
|
|
struct sdhci_ops {
|
|
int (*enable_dma)(struct sdhci_host *host);
|
|
};
|
|
|
|
|
|
extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
|
|
size_t priv_size);
|
|
extern void sdhci_free_host(struct sdhci_host *host);
|
|
|
|
static inline void *sdhci_priv(struct sdhci_host *host)
|
|
{
|
|
return (void *)host->private;
|
|
}
|
|
|
|
extern int sdhci_add_host(struct sdhci_host *host);
|
|
extern void sdhci_remove_host(struct sdhci_host *host, int dead);
|
|
|
|
#ifdef CONFIG_PM
|
|
extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
|
|
extern int sdhci_resume_host(struct sdhci_host *host);
|
|
#endif
|