linux/drivers/phy/phy-can-transceiver.c
Vinod Koul 4315eab705 phy: fixes for 6.2
Fixes in drivers for:
  - Binding fix for g12a phys
  - Kconfig operator precedence for TI driver
  - renesas: register setting
  - sunplus: null deref fix
  - rockchip-inno fix for clk_disable_unprepare()
  - MDM9607 init sequence revert due to regression
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmPKqp8ACgkQfBQHDyUj
 g0c8QxAAlT17OSekO44/4j1ZPc1c0fvgf0CEDE6xrcfoD7taByuvFK7gm2NGYSaT
 5RNYDniiMBDgchxHvy4BoEAXqrTbGLC6uFBlZ3BcEMM9ONFSU5t/J7YK0gH1WdSq
 15Bp491XhWGVr3KlqAxgtatv7qgi0JS/mRmjXnN5ytIxETCqzPWwWvMtMRudQFTy
 g3pydR1j4bTu/9yhBWfw6OIOnPVRTTmiEaqxUmahTCRld9YWvPLLJCCllZIh3YKS
 kDF3UKDP0nRTPH7LqPlZtnOFdM0yq8lU8Wzt4Y+QVzTUr2OZ7+hCK03c/kVIA/5e
 5tRValarw5hpZ0BfRAqhRIFFkh6K7ImqlMuuduZnDG8v/m7XKse7y2HaVOn9wDY8
 l4FgrzJxSbfQzyPk3JYds+9tQezM1IGAc0FxarqY99NYMwHbqAHPs+W/Ft2tRY3W
 ncG5j9YcGAdIZ/qa9/rY1Qdm9UOkzba9/bsi6ahQcW6QmtrmTtKgs2SKTpGOEnly
 qwjmjKynVByZ8Kf3310lmhHm8TPs/vN0SAKbzh0VLacAcYmJMV9bN/E/DLzttkKP
 lFx0GZ1WdyIlQaT/pXMGBPM2fux9oyNIKDn6sRmfe6ybx+I3e1UrHtgJa9HoyJet
 iJQibehGdM+o+RP12lO97IsvzN1qHhfPkN144r/PZwK95UJsWDM=
 =MDsZ
 -----END PGP SIGNATURE-----

Merge tag 'phy-fixes-6.2' into next

Merge fixes tag pulled into mainline by Linus into phy/next due to
dependency on amlogic patches
2023-02-14 19:25:45 +05:30

174 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* phy-can-transceiver.c - phy driver for CAN transceivers
*
* Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com
*
*/
#include<linux/phy/phy.h>
#include<linux/platform_device.h>
#include<linux/module.h>
#include<linux/gpio.h>
#include<linux/gpio/consumer.h>
#include <linux/mux/consumer.h>
struct can_transceiver_data {
u32 flags;
#define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
#define CAN_TRANSCEIVER_EN_PRESENT BIT(1)
};
struct can_transceiver_phy {
struct phy *generic_phy;
struct gpio_desc *standby_gpio;
struct gpio_desc *enable_gpio;
struct mux_state *mux_state;
};
/* Power on function */
static int can_transceiver_phy_power_on(struct phy *phy)
{
struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
int ret;
if (can_transceiver_phy->mux_state) {
ret = mux_state_select(can_transceiver_phy->mux_state);
if (ret) {
dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
return ret;
}
}
if (can_transceiver_phy->standby_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
if (can_transceiver_phy->enable_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1);
return 0;
}
/* Power off function */
static int can_transceiver_phy_power_off(struct phy *phy)
{
struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
if (can_transceiver_phy->standby_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
if (can_transceiver_phy->enable_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
if (can_transceiver_phy->mux_state)
mux_state_deselect(can_transceiver_phy->mux_state);
return 0;
}
static const struct phy_ops can_transceiver_phy_ops = {
.power_on = can_transceiver_phy_power_on,
.power_off = can_transceiver_phy_power_off,
.owner = THIS_MODULE,
};
static const struct can_transceiver_data tcan1042_drvdata = {
.flags = CAN_TRANSCEIVER_STB_PRESENT,
};
static const struct can_transceiver_data tcan1043_drvdata = {
.flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT,
};
static const struct of_device_id can_transceiver_phy_ids[] = {
{
.compatible = "ti,tcan1042",
.data = &tcan1042_drvdata
},
{
.compatible = "ti,tcan1043",
.data = &tcan1043_drvdata
},
{
.compatible = "nxp,tjr1443",
.data = &tcan1043_drvdata
},
{ }
};
MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
static int can_transceiver_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct can_transceiver_phy *can_transceiver_phy;
const struct can_transceiver_data *drvdata;
const struct of_device_id *match;
struct phy *phy;
struct gpio_desc *standby_gpio;
struct gpio_desc *enable_gpio;
u32 max_bitrate = 0;
int err;
can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL);
if (!can_transceiver_phy)
return -ENOMEM;
match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
drvdata = match->data;
if (of_property_read_bool(dev->of_node, "mux-states")) {
struct mux_state *mux_state;
mux_state = devm_mux_state_get(dev, NULL);
if (IS_ERR(mux_state))
return dev_err_probe(&pdev->dev, PTR_ERR(mux_state),
"failed to get mux\n");
can_transceiver_phy->mux_state = mux_state;
}
phy = devm_phy_create(dev, dev->of_node,
&can_transceiver_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create can transceiver phy\n");
return PTR_ERR(phy);
}
err = device_property_read_u32(dev, "max-bitrate", &max_bitrate);
if ((err != -EINVAL) && !max_bitrate)
dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
phy->attrs.max_link_rate = max_bitrate;
can_transceiver_phy->generic_phy = phy;
if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH);
if (IS_ERR(standby_gpio))
return PTR_ERR(standby_gpio);
can_transceiver_phy->standby_gpio = standby_gpio;
}
if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(enable_gpio))
return PTR_ERR(enable_gpio);
can_transceiver_phy->enable_gpio = enable_gpio;
}
phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver can_transceiver_phy_driver = {
.probe = can_transceiver_phy_probe,
.driver = {
.name = "can-transceiver-phy",
.of_match_table = can_transceiver_phy_ids,
},
};
module_platform_driver(can_transceiver_phy_driver);
MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>");
MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>");
MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver");
MODULE_LICENSE("GPL v2");