linux/drivers/irqchip/irq-madera.c
Linus Walleij 8fa4e55bbf irqchip/madera: Drop GPIO includes
This irqchip does not use anything GPIO-related so drop
the GPIO includes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-01-17 17:04:24 +00:00

255 lines
7.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Interrupt support for Cirrus Logic Madera codecs
*
* Copyright (C) 2015-2018 Cirrus Logic, Inc. and
* Cirrus Logic International Semiconductor Ltd.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/irqchip/irq-madera.h>
#include <linux/mfd/madera/core.h>
#include <linux/mfd/madera/pdata.h>
#include <linux/mfd/madera/registers.h>
#define MADERA_IRQ(_irq, _reg) \
[MADERA_IRQ_ ## _irq] = { \
.reg_offset = (_reg) - MADERA_IRQ1_STATUS_2, \
.mask = MADERA_ ## _irq ## _EINT1 \
}
/* Mappings are the same for all Madera codecs */
static const struct regmap_irq madera_irqs[MADERA_NUM_IRQ] = {
MADERA_IRQ(FLL1_LOCK, MADERA_IRQ1_STATUS_2),
MADERA_IRQ(FLL2_LOCK, MADERA_IRQ1_STATUS_2),
MADERA_IRQ(FLL3_LOCK, MADERA_IRQ1_STATUS_2),
MADERA_IRQ(FLLAO_LOCK, MADERA_IRQ1_STATUS_2),
MADERA_IRQ(MICDET1, MADERA_IRQ1_STATUS_6),
MADERA_IRQ(MICDET2, MADERA_IRQ1_STATUS_6),
MADERA_IRQ(HPDET, MADERA_IRQ1_STATUS_6),
MADERA_IRQ(MICD_CLAMP_RISE, MADERA_IRQ1_STATUS_7),
MADERA_IRQ(MICD_CLAMP_FALL, MADERA_IRQ1_STATUS_7),
MADERA_IRQ(JD1_RISE, MADERA_IRQ1_STATUS_7),
MADERA_IRQ(JD1_FALL, MADERA_IRQ1_STATUS_7),
MADERA_IRQ(ASRC2_IN1_LOCK, MADERA_IRQ1_STATUS_9),
MADERA_IRQ(ASRC2_IN2_LOCK, MADERA_IRQ1_STATUS_9),
MADERA_IRQ(ASRC1_IN1_LOCK, MADERA_IRQ1_STATUS_9),
MADERA_IRQ(ASRC1_IN2_LOCK, MADERA_IRQ1_STATUS_9),
MADERA_IRQ(DRC2_SIG_DET, MADERA_IRQ1_STATUS_9),
MADERA_IRQ(DRC1_SIG_DET, MADERA_IRQ1_STATUS_9),
MADERA_IRQ(DSP_IRQ1, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ2, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ3, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ4, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ5, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ6, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ7, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ8, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ9, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ10, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ11, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ12, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ13, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ14, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ15, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(DSP_IRQ16, MADERA_IRQ1_STATUS_11),
MADERA_IRQ(HP3R_SC, MADERA_IRQ1_STATUS_12),
MADERA_IRQ(HP3L_SC, MADERA_IRQ1_STATUS_12),
MADERA_IRQ(HP2R_SC, MADERA_IRQ1_STATUS_12),
MADERA_IRQ(HP2L_SC, MADERA_IRQ1_STATUS_12),
MADERA_IRQ(HP1R_SC, MADERA_IRQ1_STATUS_12),
MADERA_IRQ(HP1L_SC, MADERA_IRQ1_STATUS_12),
MADERA_IRQ(SPK_OVERHEAT_WARN, MADERA_IRQ1_STATUS_15),
MADERA_IRQ(SPK_OVERHEAT, MADERA_IRQ1_STATUS_15),
MADERA_IRQ(DSP1_BUS_ERR, MADERA_IRQ1_STATUS_33),
MADERA_IRQ(DSP2_BUS_ERR, MADERA_IRQ1_STATUS_33),
MADERA_IRQ(DSP3_BUS_ERR, MADERA_IRQ1_STATUS_33),
MADERA_IRQ(DSP4_BUS_ERR, MADERA_IRQ1_STATUS_33),
MADERA_IRQ(DSP5_BUS_ERR, MADERA_IRQ1_STATUS_33),
MADERA_IRQ(DSP6_BUS_ERR, MADERA_IRQ1_STATUS_33),
MADERA_IRQ(DSP7_BUS_ERR, MADERA_IRQ1_STATUS_33),
};
static const struct regmap_irq_chip madera_irq_chip = {
.name = "madera IRQ",
.status_base = MADERA_IRQ1_STATUS_2,
.mask_base = MADERA_IRQ1_MASK_2,
.ack_base = MADERA_IRQ1_STATUS_2,
.runtime_pm = true,
.num_regs = 32,
.irqs = madera_irqs,
.num_irqs = ARRAY_SIZE(madera_irqs),
};
#ifdef CONFIG_PM_SLEEP
static int madera_suspend(struct device *dev)
{
struct madera *madera = dev_get_drvdata(dev->parent);
dev_dbg(madera->irq_dev, "Suspend, disabling IRQ\n");
/*
* A runtime resume would be needed to access the chip interrupt
* controller but runtime pm doesn't function during suspend.
* Temporarily disable interrupts until we reach suspend_noirq state.
*/
disable_irq(madera->irq);
return 0;
}
static int madera_suspend_noirq(struct device *dev)
{
struct madera *madera = dev_get_drvdata(dev->parent);
dev_dbg(madera->irq_dev, "No IRQ suspend, reenabling IRQ\n");
/* Re-enable interrupts to service wakeup interrupts from the chip */
enable_irq(madera->irq);
return 0;
}
static int madera_resume_noirq(struct device *dev)
{
struct madera *madera = dev_get_drvdata(dev->parent);
dev_dbg(madera->irq_dev, "No IRQ resume, disabling IRQ\n");
/*
* We can't handle interrupts until runtime pm is available again.
* Disable them temporarily.
*/
disable_irq(madera->irq);
return 0;
}
static int madera_resume(struct device *dev)
{
struct madera *madera = dev_get_drvdata(dev->parent);
dev_dbg(madera->irq_dev, "Resume, reenabling IRQ\n");
/* Interrupts can now be handled */
enable_irq(madera->irq);
return 0;
}
#endif
static const struct dev_pm_ops madera_irq_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(madera_suspend, madera_resume)
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(madera_suspend_noirq,
madera_resume_noirq)
};
static int madera_irq_probe(struct platform_device *pdev)
{
struct madera *madera = dev_get_drvdata(pdev->dev.parent);
struct irq_data *irq_data;
unsigned int irq_flags = 0;
int ret;
dev_dbg(&pdev->dev, "probe\n");
/*
* Read the flags from the interrupt controller if not specified
* by pdata
*/
irq_flags = madera->pdata.irq_flags;
if (!irq_flags) {
irq_data = irq_get_irq_data(madera->irq);
if (!irq_data) {
dev_err(&pdev->dev, "Invalid IRQ: %d\n", madera->irq);
return -EINVAL;
}
irq_flags = irqd_get_trigger_type(irq_data);
/* Codec defaults to trigger low, use this if no flags given */
if (irq_flags == IRQ_TYPE_NONE)
irq_flags = IRQF_TRIGGER_LOW;
}
if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
dev_err(&pdev->dev, "Host interrupt not level-triggered\n");
return -EINVAL;
}
/*
* The silicon always starts at active-low, check if we need to
* switch to active-high.
*/
if (irq_flags & IRQF_TRIGGER_HIGH) {
ret = regmap_update_bits(madera->regmap, MADERA_IRQ1_CTRL,
MADERA_IRQ_POL_MASK, 0);
if (ret) {
dev_err(&pdev->dev,
"Failed to set IRQ polarity: %d\n", ret);
return ret;
}
}
/*
* NOTE: regmap registers this against the OF node of the parent of
* the regmap - that is, against the mfd driver
*/
ret = regmap_add_irq_chip(madera->regmap, madera->irq, IRQF_ONESHOT, 0,
&madera_irq_chip, &madera->irq_data);
if (ret) {
dev_err(&pdev->dev, "add_irq_chip failed: %d\n", ret);
return ret;
}
/* Save dev in parent MFD struct so it is accessible to siblings */
madera->irq_dev = &pdev->dev;
return 0;
}
static int madera_irq_remove(struct platform_device *pdev)
{
struct madera *madera = dev_get_drvdata(pdev->dev.parent);
/*
* The IRQ is disabled by the parent MFD driver before
* it starts cleaning up all child drivers
*/
madera->irq_dev = NULL;
regmap_del_irq_chip(madera->irq, madera->irq_data);
return 0;
}
static struct platform_driver madera_irq_driver = {
.probe = &madera_irq_probe,
.remove = &madera_irq_remove,
.driver = {
.name = "madera-irq",
.pm = &madera_irq_pm_ops,
}
};
module_platform_driver(madera_irq_driver);
MODULE_SOFTDEP("pre: madera");
MODULE_DESCRIPTION("Madera IRQ driver");
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
MODULE_LICENSE("GPL v2");