mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 14:04:05 +08:00
5a0e3ad6af
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
465 lines
9.3 KiB
C
465 lines
9.3 KiB
C
/*
|
|
* linux/drivers/mmc/core/mmc_ops.h
|
|
*
|
|
* Copyright 2006-2007 Pierre Ossman
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/mmc.h>
|
|
|
|
#include "core.h"
|
|
#include "mmc_ops.h"
|
|
|
|
static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
|
|
BUG_ON(!host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SELECT_CARD;
|
|
|
|
if (card) {
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
} else {
|
|
cmd.arg = 0;
|
|
cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
|
|
}
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_select_card(struct mmc_card *card)
|
|
{
|
|
BUG_ON(!card);
|
|
|
|
return _mmc_select_card(card->host, card);
|
|
}
|
|
|
|
int mmc_deselect_cards(struct mmc_host *host)
|
|
{
|
|
return _mmc_select_card(host, NULL);
|
|
}
|
|
|
|
int mmc_card_sleepawake(struct mmc_host *host, int sleep)
|
|
{
|
|
struct mmc_command cmd;
|
|
struct mmc_card *card = host->card;
|
|
int err;
|
|
|
|
if (sleep)
|
|
mmc_deselect_cards(host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SLEEP_AWAKE;
|
|
cmd.arg = card->rca << 16;
|
|
if (sleep)
|
|
cmd.arg |= 1 << 15;
|
|
|
|
cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* If the host does not wait while the card signals busy, then we will
|
|
* will have to wait the sleep/awake timeout. Note, we cannot use the
|
|
* SEND_STATUS command to poll the status because that command (and most
|
|
* others) is invalid while the card sleeps.
|
|
*/
|
|
if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
|
|
mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
|
|
|
|
if (!sleep)
|
|
err = mmc_select_card(card);
|
|
|
|
return err;
|
|
}
|
|
|
|
int mmc_go_idle(struct mmc_host *host)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
|
|
/*
|
|
* Non-SPI hosts need to prevent chipselect going active during
|
|
* GO_IDLE; that would put chips into SPI mode. Remind them of
|
|
* that in case of hardware that won't pull up DAT3/nCS otherwise.
|
|
*
|
|
* SPI hosts ignore ios.chip_select; it's managed according to
|
|
* rules that must accomodate non-MMC slaves which this layer
|
|
* won't even know about.
|
|
*/
|
|
if (!mmc_host_is_spi(host)) {
|
|
mmc_set_chip_select(host, MMC_CS_HIGH);
|
|
mmc_delay(1);
|
|
}
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_GO_IDLE_STATE;
|
|
cmd.arg = 0;
|
|
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
|
mmc_delay(1);
|
|
|
|
if (!mmc_host_is_spi(host)) {
|
|
mmc_set_chip_select(host, MMC_CS_DONTCARE);
|
|
mmc_delay(1);
|
|
}
|
|
|
|
host->use_spi_crc = 0;
|
|
|
|
return err;
|
|
}
|
|
|
|
int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
|
|
{
|
|
struct mmc_command cmd;
|
|
int i, err = 0;
|
|
|
|
BUG_ON(!host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SEND_OP_COND;
|
|
cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
|
|
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
|
|
|
|
for (i = 100; i; i--) {
|
|
err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
if (err)
|
|
break;
|
|
|
|
/* if we're just probing, do a single pass */
|
|
if (ocr == 0)
|
|
break;
|
|
|
|
/* otherwise wait until reset completes */
|
|
if (mmc_host_is_spi(host)) {
|
|
if (!(cmd.resp[0] & R1_SPI_IDLE))
|
|
break;
|
|
} else {
|
|
if (cmd.resp[0] & MMC_CARD_BUSY)
|
|
break;
|
|
}
|
|
|
|
err = -ETIMEDOUT;
|
|
|
|
mmc_delay(10);
|
|
}
|
|
|
|
if (rocr && !mmc_host_is_spi(host))
|
|
*rocr = cmd.resp[0];
|
|
|
|
return err;
|
|
}
|
|
|
|
int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
|
|
BUG_ON(!host);
|
|
BUG_ON(!cid);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_ALL_SEND_CID;
|
|
cmd.arg = 0;
|
|
cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
return err;
|
|
|
|
memcpy(cid, cmd.resp, sizeof(u32) * 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_set_relative_addr(struct mmc_card *card)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
|
|
BUG_ON(!card);
|
|
BUG_ON(!card->host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SET_RELATIVE_ADDR;
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
|
|
BUG_ON(!host);
|
|
BUG_ON(!cxd);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = opcode;
|
|
cmd.arg = arg;
|
|
cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
return err;
|
|
|
|
memcpy(cxd, cmd.resp, sizeof(u32) * 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
|
|
u32 opcode, void *buf, unsigned len)
|
|
{
|
|
struct mmc_request mrq;
|
|
struct mmc_command cmd;
|
|
struct mmc_data data;
|
|
struct scatterlist sg;
|
|
void *data_buf;
|
|
|
|
/* dma onto stack is unsafe/nonportable, but callers to this
|
|
* routine normally provide temporary on-stack buffers ...
|
|
*/
|
|
data_buf = kmalloc(len, GFP_KERNEL);
|
|
if (data_buf == NULL)
|
|
return -ENOMEM;
|
|
|
|
memset(&mrq, 0, sizeof(struct mmc_request));
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
memset(&data, 0, sizeof(struct mmc_data));
|
|
|
|
mrq.cmd = &cmd;
|
|
mrq.data = &data;
|
|
|
|
cmd.opcode = opcode;
|
|
cmd.arg = 0;
|
|
|
|
/* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
|
|
* rely on callers to never use this with "native" calls for reading
|
|
* CSD or CID. Native versions of those commands use the R2 type,
|
|
* not R1 plus a data block.
|
|
*/
|
|
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
|
data.blksz = len;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
data.sg = &sg;
|
|
data.sg_len = 1;
|
|
|
|
sg_init_one(&sg, data_buf, len);
|
|
|
|
if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
|
|
/*
|
|
* The spec states that CSR and CID accesses have a timeout
|
|
* of 64 clock cycles.
|
|
*/
|
|
data.timeout_ns = 0;
|
|
data.timeout_clks = 64;
|
|
} else
|
|
mmc_set_data_timeout(&data, card);
|
|
|
|
mmc_wait_for_req(host, &mrq);
|
|
|
|
memcpy(buf, data_buf, len);
|
|
kfree(data_buf);
|
|
|
|
if (cmd.error)
|
|
return cmd.error;
|
|
if (data.error)
|
|
return data.error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_send_csd(struct mmc_card *card, u32 *csd)
|
|
{
|
|
int ret, i;
|
|
|
|
if (!mmc_host_is_spi(card->host))
|
|
return mmc_send_cxd_native(card->host, card->rca << 16,
|
|
csd, MMC_SEND_CSD);
|
|
|
|
ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0;i < 4;i++)
|
|
csd[i] = be32_to_cpu(csd[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_send_cid(struct mmc_host *host, u32 *cid)
|
|
{
|
|
int ret, i;
|
|
|
|
if (!mmc_host_is_spi(host)) {
|
|
if (!host->card)
|
|
return -EINVAL;
|
|
return mmc_send_cxd_native(host, host->card->rca << 16,
|
|
cid, MMC_SEND_CID);
|
|
}
|
|
|
|
ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0;i < 4;i++)
|
|
cid[i] = be32_to_cpu(cid[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
|
|
{
|
|
return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
|
|
ext_csd, 512);
|
|
}
|
|
|
|
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
|
|
{
|
|
struct mmc_command cmd;
|
|
int err;
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SPI_READ_OCR;
|
|
cmd.arg = highcap ? (1 << 30) : 0;
|
|
cmd.flags = MMC_RSP_SPI_R3;
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
|
|
*ocrp = cmd.resp[1];
|
|
return err;
|
|
}
|
|
|
|
int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
|
|
{
|
|
struct mmc_command cmd;
|
|
int err;
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SPI_CRC_ON_OFF;
|
|
cmd.flags = MMC_RSP_SPI_R1;
|
|
cmd.arg = use_crc;
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, 0);
|
|
if (!err)
|
|
host->use_spi_crc = use_crc;
|
|
return err;
|
|
}
|
|
|
|
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
u32 status;
|
|
|
|
BUG_ON(!card);
|
|
BUG_ON(!card->host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SWITCH;
|
|
cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
|
|
(index << 16) |
|
|
(value << 8) |
|
|
set;
|
|
cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Must check status to be sure of no errors */
|
|
do {
|
|
err = mmc_send_status(card, &status);
|
|
if (err)
|
|
return err;
|
|
if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
|
|
break;
|
|
if (mmc_host_is_spi(card->host))
|
|
break;
|
|
} while (R1_CURRENT_STATE(status) == 7);
|
|
|
|
if (mmc_host_is_spi(card->host)) {
|
|
if (status & R1_SPI_ILLEGAL_COMMAND)
|
|
return -EBADMSG;
|
|
} else {
|
|
if (status & 0xFDFFA000)
|
|
printk(KERN_WARNING "%s: unexpected status %#x after "
|
|
"switch", mmc_hostname(card->host), status);
|
|
if (status & R1_SWITCH_ERROR)
|
|
return -EBADMSG;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_send_status(struct mmc_card *card, u32 *status)
|
|
{
|
|
int err;
|
|
struct mmc_command cmd;
|
|
|
|
BUG_ON(!card);
|
|
BUG_ON(!card->host);
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = MMC_SEND_STATUS;
|
|
if (!mmc_host_is_spi(card->host))
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
|
|
if (err)
|
|
return err;
|
|
|
|
/* NOTE: callers are required to understand the difference
|
|
* between "native" and SPI format status words!
|
|
*/
|
|
if (status)
|
|
*status = cmd.resp[0];
|
|
|
|
return 0;
|
|
}
|
|
|