Fabrice Gasnier 90938ca432 iio: trigger: stm32-timer: add enable attribute ... In order to use encoder mode, timers needs to be enabled (e.g. CEN bit) along with peripheral clock. Add IIO_CHAN_INFO_ENABLE attribute to handle this. Also, in triggered mode, CEN bit is set automatically in hardware. Then clock must be enabled before starting triggered mode. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-07-30 14:48:14 +01:00
..
accel	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
adc	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
amplifiers
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
light	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
magnetometer	iio: magnetometer: st_magn_spi: fix spi_device_id table	2017-06-11 15:07:40 +01:00
multiplexer	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: bmp280: properly initialize device for humidity reading	2017-07-30 14:41:12 +01:00
proximity	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: trigger: stm32-timer: add enable attribute	2017-07-30 14:48:14 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c	Char/Misc patches for 4.13-rc1	2017-07-03 20:55:59 -07:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00