linux/include/net/udp_tunnel.h
Jakub Kicinski b9ef3fecd1 udp_tunnel: reshuffle NETIF_F_RX_UDP_TUNNEL_PORT checks
Move the NETIF_F_RX_UDP_TUNNEL_PORT feature check into
udp_tunnel_nic_*_port() helpers, since they're always
done right before the call.

Add similar checks before calling the notifier.
udp_tunnel_nic invokes the notifier without checking
features which could result in some wasted cycles.

Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 12:53:29 -08:00

380 lines
12 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __NET_UDP_TUNNEL_H
#define __NET_UDP_TUNNEL_H
#include <net/ip_tunnels.h>
#include <net/udp.h>
#if IS_ENABLED(CONFIG_IPV6)
#include <net/ipv6.h>
#include <net/ipv6_stubs.h>
#endif
struct udp_port_cfg {
u8 family;
/* Used only for kernel-created sockets */
union {
struct in_addr local_ip;
#if IS_ENABLED(CONFIG_IPV6)
struct in6_addr local_ip6;
#endif
};
union {
struct in_addr peer_ip;
#if IS_ENABLED(CONFIG_IPV6)
struct in6_addr peer_ip6;
#endif
};
__be16 local_udp_port;
__be16 peer_udp_port;
int bind_ifindex;
unsigned int use_udp_checksums:1,
use_udp6_tx_checksums:1,
use_udp6_rx_checksums:1,
ipv6_v6only:1;
};
int udp_sock_create4(struct net *net, struct udp_port_cfg *cfg,
struct socket **sockp);
#if IS_ENABLED(CONFIG_IPV6)
int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg,
struct socket **sockp);
#else
static inline int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg,
struct socket **sockp)
{
return 0;
}
#endif
static inline int udp_sock_create(struct net *net,
struct udp_port_cfg *cfg,
struct socket **sockp)
{
if (cfg->family == AF_INET)
return udp_sock_create4(net, cfg, sockp);
if (cfg->family == AF_INET6)
return udp_sock_create6(net, cfg, sockp);
return -EPFNOSUPPORT;
}
typedef int (*udp_tunnel_encap_rcv_t)(struct sock *sk, struct sk_buff *skb);
typedef int (*udp_tunnel_encap_err_lookup_t)(struct sock *sk,
struct sk_buff *skb);
typedef void (*udp_tunnel_encap_destroy_t)(struct sock *sk);
typedef struct sk_buff *(*udp_tunnel_gro_receive_t)(struct sock *sk,
struct list_head *head,
struct sk_buff *skb);
typedef int (*udp_tunnel_gro_complete_t)(struct sock *sk, struct sk_buff *skb,
int nhoff);
struct udp_tunnel_sock_cfg {
void *sk_user_data; /* user data used by encap_rcv call back */
/* Used for setting up udp_sock fields, see udp.h for details */
__u8 encap_type;
udp_tunnel_encap_rcv_t encap_rcv;
udp_tunnel_encap_err_lookup_t encap_err_lookup;
udp_tunnel_encap_destroy_t encap_destroy;
udp_tunnel_gro_receive_t gro_receive;
udp_tunnel_gro_complete_t gro_complete;
};
/* Setup the given (UDP) sock to receive UDP encapsulated packets */
void setup_udp_tunnel_sock(struct net *net, struct socket *sock,
struct udp_tunnel_sock_cfg *sock_cfg);
/* -- List of parsable UDP tunnel types --
*
* Adding to this list will result in serious debate. The main issue is
* that this list is essentially a list of workarounds for either poorly
* designed tunnels, or poorly designed device offloads.
*
* The parsing supported via these types should really be used for Rx
* traffic only as the network stack will have already inserted offsets for
* the location of the headers in the skb. In addition any ports that are
* pushed should be kept within the namespace without leaking to other
* devices such as VFs or other ports on the same device.
*
* It is strongly encouraged to use CHECKSUM_COMPLETE for Rx to avoid the
* need to use this for Rx checksum offload. It should not be necessary to
* call this function to perform Tx offloads on outgoing traffic.
*/
enum udp_parsable_tunnel_type {
UDP_TUNNEL_TYPE_VXLAN = BIT(0), /* RFC 7348 */
UDP_TUNNEL_TYPE_GENEVE = BIT(1), /* draft-ietf-nvo3-geneve */
UDP_TUNNEL_TYPE_VXLAN_GPE = BIT(2), /* draft-ietf-nvo3-vxlan-gpe */
};
struct udp_tunnel_info {
unsigned short type;
sa_family_t sa_family;
__be16 port;
u8 hw_priv;
};
/* Notify network devices of offloadable types */
void udp_tunnel_push_rx_port(struct net_device *dev, struct socket *sock,
unsigned short type);
void udp_tunnel_drop_rx_port(struct net_device *dev, struct socket *sock,
unsigned short type);
void udp_tunnel_notify_add_rx_port(struct socket *sock, unsigned short type);
void udp_tunnel_notify_del_rx_port(struct socket *sock, unsigned short type);
static inline void udp_tunnel_get_rx_info(struct net_device *dev)
{
ASSERT_RTNL();
if (!(dev->features & NETIF_F_RX_UDP_TUNNEL_PORT))
return;
call_netdevice_notifiers(NETDEV_UDP_TUNNEL_PUSH_INFO, dev);
}
static inline void udp_tunnel_drop_rx_info(struct net_device *dev)
{
ASSERT_RTNL();
if (!(dev->features & NETIF_F_RX_UDP_TUNNEL_PORT))
return;
call_netdevice_notifiers(NETDEV_UDP_TUNNEL_DROP_INFO, dev);
}
/* Transmit the skb using UDP encapsulation. */
void udp_tunnel_xmit_skb(struct rtable *rt, struct sock *sk, struct sk_buff *skb,
__be32 src, __be32 dst, __u8 tos, __u8 ttl,
__be16 df, __be16 src_port, __be16 dst_port,
bool xnet, bool nocheck);
int udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk,
struct sk_buff *skb,
struct net_device *dev, struct in6_addr *saddr,
struct in6_addr *daddr,
__u8 prio, __u8 ttl, __be32 label,
__be16 src_port, __be16 dst_port, bool nocheck);
void udp_tunnel_sock_release(struct socket *sock);
struct metadata_dst *udp_tun_rx_dst(struct sk_buff *skb, unsigned short family,
__be16 flags, __be64 tunnel_id,
int md_size);
#ifdef CONFIG_INET
static inline int udp_tunnel_handle_offloads(struct sk_buff *skb, bool udp_csum)
{
int type = udp_csum ? SKB_GSO_UDP_TUNNEL_CSUM : SKB_GSO_UDP_TUNNEL;
return iptunnel_handle_offloads(skb, type);
}
#endif
static inline void udp_tunnel_encap_enable(struct socket *sock)
{
struct udp_sock *up = udp_sk(sock->sk);
if (up->encap_enabled)
return;
up->encap_enabled = 1;
#if IS_ENABLED(CONFIG_IPV6)
if (sock->sk->sk_family == PF_INET6)
ipv6_stub->udpv6_encap_enable();
else
#endif
udp_encap_enable();
}
#define UDP_TUNNEL_NIC_MAX_TABLES 4
enum udp_tunnel_nic_info_flags {
/* Device callbacks may sleep */
UDP_TUNNEL_NIC_INFO_MAY_SLEEP = BIT(0),
/* Device only supports offloads when it's open, all ports
* will be removed before close and re-added after open.
*/
UDP_TUNNEL_NIC_INFO_OPEN_ONLY = BIT(1),
/* Device supports only IPv4 tunnels */
UDP_TUNNEL_NIC_INFO_IPV4_ONLY = BIT(2),
/* Device has hard-coded the IANA VXLAN port (4789) as VXLAN.
* This port must not be counted towards n_entries of any table.
* Driver will not receive any callback associated with port 4789.
*/
UDP_TUNNEL_NIC_INFO_STATIC_IANA_VXLAN = BIT(3),
};
struct udp_tunnel_nic;
#define UDP_TUNNEL_NIC_MAX_SHARING_DEVICES (U16_MAX / 2)
struct udp_tunnel_nic_shared {
struct udp_tunnel_nic *udp_tunnel_nic_info;
struct list_head devices;
};
struct udp_tunnel_nic_shared_node {
struct net_device *dev;
struct list_head list;
};
/**
* struct udp_tunnel_nic_info - driver UDP tunnel offload information
* @set_port: callback for adding a new port
* @unset_port: callback for removing a port
* @sync_table: callback for syncing the entire port table at once
* @shared: reference to device global state (optional)
* @flags: device flags from enum udp_tunnel_nic_info_flags
* @tables: UDP port tables this device has
* @tables.n_entries: number of entries in this table
* @tables.tunnel_types: types of tunnels this table accepts
*
* Drivers are expected to provide either @set_port and @unset_port callbacks
* or the @sync_table callback. Callbacks are invoked with rtnl lock held.
*
* Devices which (misguidedly) share the UDP tunnel port table across multiple
* netdevs should allocate an instance of struct udp_tunnel_nic_shared and
* point @shared at it.
* There must never be more than %UDP_TUNNEL_NIC_MAX_SHARING_DEVICES devices
* sharing a table.
*
* Known limitations:
* - UDP tunnel port notifications are fundamentally best-effort -
* it is likely the driver will both see skbs which use a UDP tunnel port,
* while not being a tunneled skb, and tunnel skbs from other ports -
* drivers should only use these ports for non-critical RX-side offloads,
* e.g. the checksum offload;
* - none of the devices care about the socket family at present, so we don't
* track it. Please extend this code if you care.
*/
struct udp_tunnel_nic_info {
/* one-by-one */
int (*set_port)(struct net_device *dev,
unsigned int table, unsigned int entry,
struct udp_tunnel_info *ti);
int (*unset_port)(struct net_device *dev,
unsigned int table, unsigned int entry,
struct udp_tunnel_info *ti);
/* all at once */
int (*sync_table)(struct net_device *dev, unsigned int table);
struct udp_tunnel_nic_shared *shared;
unsigned int flags;
struct udp_tunnel_nic_table_info {
unsigned int n_entries;
unsigned int tunnel_types;
} tables[UDP_TUNNEL_NIC_MAX_TABLES];
};
/* UDP tunnel module dependencies
*
* Tunnel drivers are expected to have a hard dependency on the udp_tunnel
* module. NIC drivers are not, they just attach their
* struct udp_tunnel_nic_info to the netdev and wait for callbacks to come.
* Loading a tunnel driver will cause the udp_tunnel module to be loaded
* and only then will all the required state structures be allocated.
* Since we want a weak dependency from the drivers and the core to udp_tunnel
* we call things through the following stubs.
*/
struct udp_tunnel_nic_ops {
void (*get_port)(struct net_device *dev, unsigned int table,
unsigned int idx, struct udp_tunnel_info *ti);
void (*set_port_priv)(struct net_device *dev, unsigned int table,
unsigned int idx, u8 priv);
void (*add_port)(struct net_device *dev, struct udp_tunnel_info *ti);
void (*del_port)(struct net_device *dev, struct udp_tunnel_info *ti);
void (*reset_ntf)(struct net_device *dev);
size_t (*dump_size)(struct net_device *dev, unsigned int table);
int (*dump_write)(struct net_device *dev, unsigned int table,
struct sk_buff *skb);
};
#ifdef CONFIG_INET
extern const struct udp_tunnel_nic_ops *udp_tunnel_nic_ops;
#else
#define udp_tunnel_nic_ops ((struct udp_tunnel_nic_ops *)NULL)
#endif
static inline void
udp_tunnel_nic_get_port(struct net_device *dev, unsigned int table,
unsigned int idx, struct udp_tunnel_info *ti)
{
/* This helper is used from .sync_table, we indicate empty entries
* by zero'ed @ti. Drivers which need to know the details of a port
* when it gets deleted should use the .set_port / .unset_port
* callbacks.
* Zero out here, otherwise !CONFIG_INET causes uninitilized warnings.
*/
memset(ti, 0, sizeof(*ti));
if (udp_tunnel_nic_ops)
udp_tunnel_nic_ops->get_port(dev, table, idx, ti);
}
static inline void
udp_tunnel_nic_set_port_priv(struct net_device *dev, unsigned int table,
unsigned int idx, u8 priv)
{
if (udp_tunnel_nic_ops)
udp_tunnel_nic_ops->set_port_priv(dev, table, idx, priv);
}
static inline void
udp_tunnel_nic_add_port(struct net_device *dev, struct udp_tunnel_info *ti)
{
if (!(dev->features & NETIF_F_RX_UDP_TUNNEL_PORT))
return;
if (udp_tunnel_nic_ops)
udp_tunnel_nic_ops->add_port(dev, ti);
}
static inline void
udp_tunnel_nic_del_port(struct net_device *dev, struct udp_tunnel_info *ti)
{
if (!(dev->features & NETIF_F_RX_UDP_TUNNEL_PORT))
return;
if (udp_tunnel_nic_ops)
udp_tunnel_nic_ops->del_port(dev, ti);
}
/**
* udp_tunnel_nic_reset_ntf() - device-originating reset notification
* @dev: network interface device structure
*
* Called by the driver to inform the core that the entire UDP tunnel port
* state has been lost, usually due to device reset. Core will assume device
* forgot all the ports and issue .set_port and .sync_table callbacks as
* necessary.
*
* This function must be called with rtnl lock held, and will issue all
* the callbacks before returning.
*/
static inline void udp_tunnel_nic_reset_ntf(struct net_device *dev)
{
if (udp_tunnel_nic_ops)
udp_tunnel_nic_ops->reset_ntf(dev);
}
static inline size_t
udp_tunnel_nic_dump_size(struct net_device *dev, unsigned int table)
{
if (!udp_tunnel_nic_ops)
return 0;
return udp_tunnel_nic_ops->dump_size(dev, table);
}
static inline int
udp_tunnel_nic_dump_write(struct net_device *dev, unsigned int table,
struct sk_buff *skb)
{
if (!udp_tunnel_nic_ops)
return 0;
return udp_tunnel_nic_ops->dump_write(dev, table, skb);
}
#endif