Joel Stanley 4b70c62b9e net: ftgmac100: Request clock and set speed ... According to the ASPEED datasheet, gigabit speeds require a clock of 100MHz or higher. Other speeds require 25MHz or higher. This patch configures a 100MHz clock if the system has a direct-attached PHY, or 25MHz if the system is running NC-SI which is limited to 100MHz. There appear to be no other upstream users of the FTGMAC100 driver it is hard to know the clocking requirements of other platforms. Therefore a conservative approach was taken with enabling clocks. If the platform is not ASPEED, both requesting the clock and configuring the speed is skipped. Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-10-18 12:09:06 +01:00
..
ftgmac100.c	net: ftgmac100: Request clock and set speed	2017-10-18 12:09:06 +01:00
ftgmac100.h	ftgmac100: Add pause frames configuration and support	2017-04-18 14:11:08 -04:00
ftmac100.c	net/{mii, smsc}: Make mii_ethtool_get_link_ksettings and smc_netdev_get_ecmd return void	2017-06-05 11:00:42 -04:00
ftmac100.h
Kconfig	drivers/net: remove all references to obsolete Ethernet-HOWTO	2015-06-23 06:50:35 -07:00
Makefile