Martin Blumenstingl 9073f694ef ARM: dts: meson8b: add the thermal-zones with cooling configuration ... The vendor kernel uses the following thermal-zone settings: <= 70°C: - CPU frequency limited to 1.488GHz - GPU limited to 511MHz and 2 cores (pixel processors) <= 80°C: - CPU frequency limited to 1.2GHz - GPU limited to 435MHz and 2 cores (pixel processors) <= 90°C: - CPU frequency limited to 0.804GHz - GPU limited to 328MHz and 1 core (pixel processor) Add simplified thermal configuration which is taken from the GXBB/GXL/GXM SoC family (which uses the same manufacturing process and has the same maximum junction temperature of 125°C). With this the thermal framework will try to keep the SoC temperature at or below 80°C which is identical to the vendor kernel (with the exception of one CPU frequency step from 1.488GHz to 1.536GHz). The number of GPU cores are not taken into account as this is not supported. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201221181306.904272-5-martin.blumenstingl@googlemail.com		2021-01-25 09:46:44 -08:00
..
boot	ARM: dts: meson8b: add the thermal-zones with cooling configuration	2021-01-25 09:46:44 -08:00
common	ARM/sa1111: add a missing include of dma-map-ops.h	2020-10-20 09:40:33 +02:00
configs	ARM: SoC defconfigs for 5.11	2020-12-16 16:25:03 -08:00
crypto	crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata	2020-12-04 18:13:14 +11:00
include	EFI updates collected by Ard Biesheuvel:	2020-12-24 12:40:07 -08:00
kernel	A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy	2020-12-24 13:50:23 -08:00
lib	ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak	2020-11-12 14:53:19 +00:00
mach-actions
mach-alpine
mach-artpec
mach-asm9260
mach-aspeed
mach-at91	ARM: at91: pm: remove unnecessary at91sam9x60_idle	2020-08-17 11:18:59 +02:00
mach-axxia
mach-bcm	arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL	2020-12-15 12:13:42 -08:00
mach-berlin
mach-clps711x
mach-cns3xxx
mach-davinci	arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL	2020-12-15 12:13:42 -08:00
mach-digicolor
mach-dove
mach-efm32
mach-ep93xx	treewide: Use fallthrough pseudo-keyword	2020-08-23 17:36:59 -05:00
mach-exynos	ARM: SoC updates for 5.11	2020-12-16 16:22:36 -08:00
mach-footbridge	treewide: replace '---help---' in Kconfig files with 'help'	2020-06-14 01:57:21 +09:00
mach-gemini
mach-highbank	arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL	2020-12-15 12:13:42 -08:00
mach-hisi	ARM: hisi: add support for SD5203 SoC	2020-09-30 09:56:03 +08:00
mach-imx	ARM: SoC updates for 5.11	2020-12-16 16:22:36 -08:00
mach-integrator	mm: reorder includes after introduction of linux/pgtable.h	2020-06-09 09:39:13 -07:00
mach-iop32x	mm: don't include asm/pgtable.h if linux/mm.h is already included	2020-06-09 09:39:13 -07:00
mach-ixp4xx	ARM/ixp4xx: add a missing include of dma-map-ops.h	2020-10-13 13:28:22 +02:00
mach-keystone	ARM: SoC drivers for v5.11	2020-12-16 16:38:41 -08:00
mach-lpc18xx
mach-lpc32xx
mach-mediatek
mach-meson
mach-milbeaut
mach-mmp	treewide: Use fallthrough pseudo-keyword	2020-08-23 17:36:59 -05:00
mach-moxart
mach-mstar	ARM: mstar: SMP support	2020-12-09 17:45:40 +01:00
mach-mv78xx0
mach-mvebu	mvebu fixes for 5.9 (part 1)	2020-10-26 10:11:55 +01:00
mach-mxs	ARM: mxs: Add serial number support for i.MX23, i.MX28 SoCs	2020-11-30 17:31:29 +08:00
mach-nomadik
mach-npcm
mach-nspire
mach-omap1	ARM: SoC drivers for v5.11	2020-12-16 16:38:41 -08:00
mach-omap2	ARM: SoC updates for OMAP GenPD	2020-12-16 16:53:54 -08:00
mach-orion5x	treewide: Use fallthrough pseudo-keyword	2020-08-23 17:36:59 -05:00
mach-oxnas
mach-picoxcell
mach-prima2
mach-pxa	power: supply: gpio-charger: Convert to GPIO descriptors	2020-08-27 16:47:14 +02:00
mach-qcom
mach-rda
mach-realtek
mach-realview
mach-rockchip
mach-rpc	ARM: rpc: use legacy_timer_tick	2020-10-30 21:57:05 +01:00
mach-s3c	power supply and reset changes for the v5.11 series	2020-12-19 11:58:46 -08:00
mach-s5pv210	arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL	2020-12-15 12:13:42 -08:00
mach-sa1100	power: supply: collie_battery: Convert to GPIO descriptors	2020-11-30 02:18:49 +01:00
mach-shmobile	ARM: shmobile: Stop using __raw_*() I/O accessors	2020-11-23 09:54:59 +01:00
mach-socfpga	ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()	2020-07-28 13:57:36 -05:00
mach-spear
mach-sti	Revert "ARM: sti: Implement dummy L2 cache's write_sec"	2020-06-28 14:46:54 +02:00
mach-stm32	ARM: stm32: Replace HTTP links with HTTPS ones	2020-10-03 12:38:54 -07:00
mach-sunxi	ARM: sunxi: Add machine match for the Allwinner V3 SoC	2020-11-02 10:28:14 +01:00
mach-tango	arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL	2020-12-15 12:13:42 -08:00
mach-tegra	treewide: Use fallthrough pseudo-keyword	2020-08-23 17:36:59 -05:00
mach-u300
mach-uniphier
mach-ux500
mach-versatile
mach-vexpress
mach-vt8500
mach-zx
mach-zynq	mm: reorder includes after introduction of linux/pgtable.h	2020-06-09 09:39:13 -07:00
mm	ARM updates for 5.11:	2020-12-22 13:34:27 -08:00
net
nwfpe
oprofile
plat-omap	PM: AVS: smartreflex Move driver to soc specific drivers	2020-10-16 18:28:43 +02:00
plat-orion	ARM: orion/gpio: Make use of for_each_requested_gpio()	2020-07-18 22:49:23 +02:00
plat-pxa
plat-versatile
probes	ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template	2020-10-27 12:11:51 +00:00
tools	epoll: wire up syscall epoll_pwait2	2020-12-19 11:18:38 -08:00
vdso	ARM: 9013/2: Disable KASan instrumentation for some code	2020-10-27 12:11:04 +00:00
vfp	ARM: 9044/1: vfp: use undef hook for VFP support detection	2020-12-21 11:19:19 +00:00
xen	dma-mapping updates for 5.10	2020-10-15 14:43:29 -07:00
Kbuild	ARM: 8981/1: add arch/arm/Kbuild	2020-07-21 16:33:35 +01:00
Kconfig	ARM updates for 5.11:	2020-12-22 13:34:27 -08:00
Kconfig-nommu
Kconfig.assembler	ARM: 8991/1: use VFP assembler mnemonics if available	2020-07-21 16:33:39 +01:00
Kconfig.debug	ARM: remove ebsa110 platform	2020-10-30 21:57:03 +01:00
Makefile	ARM updates for 5.11:	2020-12-22 13:34:27 -08:00