mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 16:44:10 +08:00
df561f6688
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
529 lines
12 KiB
C
529 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* omap-dmic.c -- OMAP ASoC DMIC DAI driver
|
|
*
|
|
* Copyright (C) 2010 - 2011 Texas Instruments
|
|
*
|
|
* Author: David Lambert <dlambert@ti.com>
|
|
* Misael Lopez Cruz <misael.lopez@ti.com>
|
|
* Liam Girdwood <lrg@ti.com>
|
|
* Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
|
|
#include "omap-dmic.h"
|
|
#include "sdma-pcm.h"
|
|
|
|
struct omap_dmic {
|
|
struct device *dev;
|
|
void __iomem *io_base;
|
|
struct clk *fclk;
|
|
struct pm_qos_request pm_qos_req;
|
|
int latency;
|
|
int fclk_freq;
|
|
int out_freq;
|
|
int clk_div;
|
|
int sysclk;
|
|
int threshold;
|
|
u32 ch_enabled;
|
|
bool active;
|
|
struct mutex mutex;
|
|
|
|
struct snd_dmaengine_dai_dma_data dma_data;
|
|
};
|
|
|
|
static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val)
|
|
{
|
|
writel_relaxed(val, dmic->io_base + reg);
|
|
}
|
|
|
|
static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg)
|
|
{
|
|
return readl_relaxed(dmic->io_base + reg);
|
|
}
|
|
|
|
static inline void omap_dmic_start(struct omap_dmic *dmic)
|
|
{
|
|
u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG);
|
|
|
|
/* Configure DMA controller */
|
|
omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_SET_REG,
|
|
OMAP_DMIC_DMA_ENABLE);
|
|
|
|
omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, ctrl | dmic->ch_enabled);
|
|
}
|
|
|
|
static inline void omap_dmic_stop(struct omap_dmic *dmic)
|
|
{
|
|
u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG);
|
|
omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG,
|
|
ctrl & ~OMAP_DMIC_UP_ENABLE_MASK);
|
|
|
|
/* Disable DMA request generation */
|
|
omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_CLR_REG,
|
|
OMAP_DMIC_DMA_ENABLE);
|
|
|
|
}
|
|
|
|
static inline int dmic_is_enabled(struct omap_dmic *dmic)
|
|
{
|
|
return omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG) &
|
|
OMAP_DMIC_UP_ENABLE_MASK;
|
|
}
|
|
|
|
static int omap_dmic_dai_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dmic->mutex);
|
|
|
|
if (!snd_soc_dai_active(dai))
|
|
dmic->active = 1;
|
|
else
|
|
ret = -EBUSY;
|
|
|
|
mutex_unlock(&dmic->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
|
|
mutex_lock(&dmic->mutex);
|
|
|
|
cpu_latency_qos_remove_request(&dmic->pm_qos_req);
|
|
|
|
if (!snd_soc_dai_active(dai))
|
|
dmic->active = 0;
|
|
|
|
mutex_unlock(&dmic->mutex);
|
|
}
|
|
|
|
static int omap_dmic_select_divider(struct omap_dmic *dmic, int sample_rate)
|
|
{
|
|
int divider = -EINVAL;
|
|
|
|
/*
|
|
* 192KHz rate is only supported with 19.2MHz/3.84MHz clock
|
|
* configuration.
|
|
*/
|
|
if (sample_rate == 192000) {
|
|
if (dmic->fclk_freq == 19200000 && dmic->out_freq == 3840000)
|
|
divider = 0x6; /* Divider: 5 (192KHz sampling rate) */
|
|
else
|
|
dev_err(dmic->dev,
|
|
"invalid clock configuration for 192KHz\n");
|
|
|
|
return divider;
|
|
}
|
|
|
|
switch (dmic->out_freq) {
|
|
case 1536000:
|
|
if (dmic->fclk_freq != 24576000)
|
|
goto div_err;
|
|
divider = 0x4; /* Divider: 16 */
|
|
break;
|
|
case 2400000:
|
|
switch (dmic->fclk_freq) {
|
|
case 12000000:
|
|
divider = 0x5; /* Divider: 5 */
|
|
break;
|
|
case 19200000:
|
|
divider = 0x0; /* Divider: 8 */
|
|
break;
|
|
case 24000000:
|
|
divider = 0x2; /* Divider: 10 */
|
|
break;
|
|
default:
|
|
goto div_err;
|
|
}
|
|
break;
|
|
case 3072000:
|
|
if (dmic->fclk_freq != 24576000)
|
|
goto div_err;
|
|
divider = 0x3; /* Divider: 8 */
|
|
break;
|
|
case 3840000:
|
|
if (dmic->fclk_freq != 19200000)
|
|
goto div_err;
|
|
divider = 0x1; /* Divider: 5 (96KHz sampling rate) */
|
|
break;
|
|
default:
|
|
dev_err(dmic->dev, "invalid out frequency: %dHz\n",
|
|
dmic->out_freq);
|
|
break;
|
|
}
|
|
|
|
return divider;
|
|
|
|
div_err:
|
|
dev_err(dmic->dev, "invalid out frequency %dHz for %dHz input\n",
|
|
dmic->out_freq, dmic->fclk_freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
struct snd_dmaengine_dai_dma_data *dma_data;
|
|
int channels;
|
|
|
|
dmic->clk_div = omap_dmic_select_divider(dmic, params_rate(params));
|
|
if (dmic->clk_div < 0) {
|
|
dev_err(dmic->dev, "no valid divider for %dHz from %dHz\n",
|
|
dmic->out_freq, dmic->fclk_freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dmic->ch_enabled = 0;
|
|
channels = params_channels(params);
|
|
switch (channels) {
|
|
case 6:
|
|
dmic->ch_enabled |= OMAP_DMIC_UP3_ENABLE;
|
|
fallthrough;
|
|
case 4:
|
|
dmic->ch_enabled |= OMAP_DMIC_UP2_ENABLE;
|
|
fallthrough;
|
|
case 2:
|
|
dmic->ch_enabled |= OMAP_DMIC_UP1_ENABLE;
|
|
break;
|
|
default:
|
|
dev_err(dmic->dev, "invalid number of legacy channels\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* packet size is threshold * channels */
|
|
dma_data = snd_soc_dai_get_dma_data(dai, substream);
|
|
dma_data->maxburst = dmic->threshold * channels;
|
|
dmic->latency = (OMAP_DMIC_THRES_MAX - dmic->threshold) * USEC_PER_SEC /
|
|
params_rate(params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
u32 ctrl;
|
|
|
|
if (cpu_latency_qos_request_active(&dmic->pm_qos_req))
|
|
cpu_latency_qos_update_request(&dmic->pm_qos_req,
|
|
dmic->latency);
|
|
|
|
/* Configure uplink threshold */
|
|
omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold);
|
|
|
|
ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG);
|
|
|
|
/* Set dmic out format */
|
|
ctrl &= ~(OMAP_DMIC_FORMAT | OMAP_DMIC_POLAR_MASK);
|
|
ctrl |= (OMAP_DMICOUTFORMAT_LJUST | OMAP_DMIC_POLAR1 |
|
|
OMAP_DMIC_POLAR2 | OMAP_DMIC_POLAR3);
|
|
|
|
/* Configure dmic clock divider */
|
|
ctrl &= ~OMAP_DMIC_CLK_DIV_MASK;
|
|
ctrl |= OMAP_DMIC_CLK_DIV(dmic->clk_div);
|
|
|
|
omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, ctrl);
|
|
|
|
omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG,
|
|
ctrl | OMAP_DMICOUTFORMAT_LJUST | OMAP_DMIC_POLAR1 |
|
|
OMAP_DMIC_POLAR2 | OMAP_DMIC_POLAR3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dmic_dai_trigger(struct snd_pcm_substream *substream,
|
|
int cmd, struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
omap_dmic_start(dmic);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
omap_dmic_stop(dmic);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dmic_select_fclk(struct omap_dmic *dmic, int clk_id,
|
|
unsigned int freq)
|
|
{
|
|
struct clk *parent_clk, *mux;
|
|
char *parent_clk_name;
|
|
int ret = 0;
|
|
|
|
switch (freq) {
|
|
case 12000000:
|
|
case 19200000:
|
|
case 24000000:
|
|
case 24576000:
|
|
break;
|
|
default:
|
|
dev_err(dmic->dev, "invalid input frequency: %dHz\n", freq);
|
|
dmic->fclk_freq = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dmic->sysclk == clk_id) {
|
|
dmic->fclk_freq = freq;
|
|
return 0;
|
|
}
|
|
|
|
/* re-parent not allowed if a stream is ongoing */
|
|
if (dmic->active && dmic_is_enabled(dmic)) {
|
|
dev_err(dmic->dev, "can't re-parent when DMIC active\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
switch (clk_id) {
|
|
case OMAP_DMIC_SYSCLK_PAD_CLKS:
|
|
parent_clk_name = "pad_clks_ck";
|
|
break;
|
|
case OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS:
|
|
parent_clk_name = "slimbus_clk";
|
|
break;
|
|
case OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS:
|
|
parent_clk_name = "dmic_sync_mux_ck";
|
|
break;
|
|
default:
|
|
dev_err(dmic->dev, "fclk clk_id (%d) not supported\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
parent_clk = clk_get(dmic->dev, parent_clk_name);
|
|
if (IS_ERR(parent_clk)) {
|
|
dev_err(dmic->dev, "can't get %s\n", parent_clk_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mux = clk_get_parent(dmic->fclk);
|
|
if (IS_ERR(mux)) {
|
|
dev_err(dmic->dev, "can't get fck mux parent\n");
|
|
clk_put(parent_clk);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&dmic->mutex);
|
|
if (dmic->active) {
|
|
/* disable clock while reparenting */
|
|
pm_runtime_put_sync(dmic->dev);
|
|
ret = clk_set_parent(mux, parent_clk);
|
|
pm_runtime_get_sync(dmic->dev);
|
|
} else {
|
|
ret = clk_set_parent(mux, parent_clk);
|
|
}
|
|
mutex_unlock(&dmic->mutex);
|
|
|
|
if (ret < 0) {
|
|
dev_err(dmic->dev, "re-parent failed\n");
|
|
goto err_busy;
|
|
}
|
|
|
|
dmic->sysclk = clk_id;
|
|
dmic->fclk_freq = freq;
|
|
|
|
err_busy:
|
|
clk_put(mux);
|
|
clk_put(parent_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_dmic_select_outclk(struct omap_dmic *dmic, int clk_id,
|
|
unsigned int freq)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (clk_id != OMAP_DMIC_ABE_DMIC_CLK) {
|
|
dev_err(dmic->dev, "output clk_id (%d) not supported\n",
|
|
clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (freq) {
|
|
case 1536000:
|
|
case 2400000:
|
|
case 3072000:
|
|
case 3840000:
|
|
dmic->out_freq = freq;
|
|
break;
|
|
default:
|
|
dev_err(dmic->dev, "invalid out frequency: %dHz\n", freq);
|
|
dmic->out_freq = 0;
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_dmic_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
|
|
unsigned int freq, int dir)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
|
|
if (dir == SND_SOC_CLOCK_IN)
|
|
return omap_dmic_select_fclk(dmic, clk_id, freq);
|
|
else if (dir == SND_SOC_CLOCK_OUT)
|
|
return omap_dmic_select_outclk(dmic, clk_id, freq);
|
|
|
|
dev_err(dmic->dev, "invalid clock direction (%d)\n", dir);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops omap_dmic_dai_ops = {
|
|
.startup = omap_dmic_dai_startup,
|
|
.shutdown = omap_dmic_dai_shutdown,
|
|
.hw_params = omap_dmic_dai_hw_params,
|
|
.prepare = omap_dmic_dai_prepare,
|
|
.trigger = omap_dmic_dai_trigger,
|
|
.set_sysclk = omap_dmic_set_dai_sysclk,
|
|
};
|
|
|
|
static int omap_dmic_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pm_runtime_enable(dmic->dev);
|
|
|
|
/* Disable lines while request is ongoing */
|
|
pm_runtime_get_sync(dmic->dev);
|
|
omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, 0x00);
|
|
pm_runtime_put_sync(dmic->dev);
|
|
|
|
/* Configure DMIC threshold value */
|
|
dmic->threshold = OMAP_DMIC_THRES_MAX - 3;
|
|
|
|
snd_soc_dai_init_dma_data(dai, NULL, &dmic->dma_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dmic_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pm_runtime_disable(dmic->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver omap_dmic_dai = {
|
|
.name = "omap-dmic",
|
|
.probe = omap_dmic_probe,
|
|
.remove = omap_dmic_remove,
|
|
.capture = {
|
|
.channels_min = 2,
|
|
.channels_max = 6,
|
|
.rates = SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
|
|
.formats = SNDRV_PCM_FMTBIT_S32_LE,
|
|
.sig_bits = 24,
|
|
},
|
|
.ops = &omap_dmic_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver omap_dmic_component = {
|
|
.name = "omap-dmic",
|
|
};
|
|
|
|
static int asoc_dmic_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_dmic *dmic;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
dmic = devm_kzalloc(&pdev->dev, sizeof(struct omap_dmic), GFP_KERNEL);
|
|
if (!dmic)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, dmic);
|
|
dmic->dev = &pdev->dev;
|
|
dmic->sysclk = OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS;
|
|
|
|
mutex_init(&dmic->mutex);
|
|
|
|
dmic->fclk = devm_clk_get(dmic->dev, "fck");
|
|
if (IS_ERR(dmic->fclk)) {
|
|
dev_err(dmic->dev, "cant get fck\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
|
|
if (!res) {
|
|
dev_err(dmic->dev, "invalid dma memory resource\n");
|
|
return -ENODEV;
|
|
}
|
|
dmic->dma_data.addr = res->start + OMAP_DMIC_DATA_REG;
|
|
|
|
dmic->dma_data.filter_data = "up_link";
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
|
|
dmic->io_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(dmic->io_base))
|
|
return PTR_ERR(dmic->io_base);
|
|
|
|
|
|
ret = devm_snd_soc_register_component(&pdev->dev,
|
|
&omap_dmic_component,
|
|
&omap_dmic_dai, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sdma_pcm_platform_register(&pdev->dev, NULL, "up_link");
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id omap_dmic_of_match[] = {
|
|
{ .compatible = "ti,omap4-dmic", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_dmic_of_match);
|
|
|
|
static struct platform_driver asoc_dmic_driver = {
|
|
.driver = {
|
|
.name = "omap-dmic",
|
|
.of_match_table = omap_dmic_of_match,
|
|
},
|
|
.probe = asoc_dmic_probe,
|
|
};
|
|
|
|
module_platform_driver(asoc_dmic_driver);
|
|
|
|
MODULE_ALIAS("platform:omap-dmic");
|
|
MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
|
|
MODULE_DESCRIPTION("OMAP DMIC ASoC Interface");
|
|
MODULE_LICENSE("GPL");
|