linux/drivers/mtd/onenand/omap2.c
Jarkko Nikula 73069e388d ARM: OMAP: Fix gpio by switching to generic gpio calls, v2
Fix compile by removing remaining omap specific gpio
calls. Based on earlier patches by Jarkko Nikula.

Also remove old GPIO key code, there is already a patch
to do this with gpio_keys.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15 13:09:52 +02:00

801 lines
20 KiB
C

/*
* linux/drivers/mtd/onenand/omap2.c
*
* OneNAND driver for OMAP2 / OMAP3
*
* Copyright © 2005-2006 Nokia Corporation
*
* Author: Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä
* IRQ and DMA support written by Timo Teras
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; see the file COPYING. If not, write to the Free Software
* Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <asm/mach/flash.h>
#include <mach/gpmc.h>
#include <mach/onenand.h>
#include <mach/gpio.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/board.h>
#define DRIVER_NAME "omap2-onenand"
#define ONENAND_IO_SIZE SZ_128K
#define ONENAND_BUFRAM_SIZE (1024 * 5)
struct omap2_onenand {
struct platform_device *pdev;
int gpmc_cs;
unsigned long phys_base;
int gpio_irq;
struct mtd_info mtd;
struct mtd_partition *parts;
struct onenand_chip onenand;
struct completion irq_done;
struct completion dma_done;
int dma_channel;
int freq;
int (*setup)(void __iomem *base, int freq);
};
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
{
struct omap2_onenand *c = data;
complete(&c->dma_done);
}
static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
{
struct omap2_onenand *c = dev_id;
complete(&c->irq_done);
return IRQ_HANDLED;
}
static inline unsigned short read_reg(struct omap2_onenand *c, int reg)
{
return readw(c->onenand.base + reg);
}
static inline void write_reg(struct omap2_onenand *c, unsigned short value,
int reg)
{
writew(value, c->onenand.base + reg);
}
static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr)
{
printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
msg, state, ctrl, intr);
}
static void wait_warn(char *msg, int state, unsigned int ctrl,
unsigned int intr)
{
printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
"intr 0x%04x\n", msg, state, ctrl, intr);
}
static int omap2_onenand_wait(struct mtd_info *mtd, int state)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
unsigned int intr = 0;
unsigned int ctrl;
unsigned long timeout;
u32 syscfg;
if (state == FL_RESETING) {
int i;
for (i = 0; i < 20; i++) {
udelay(1);
intr = read_reg(c, ONENAND_REG_INTERRUPT);
if (intr & ONENAND_INT_MASTER)
break;
}
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
wait_err("controller error", state, ctrl, intr);
return -EIO;
}
if (!(intr & ONENAND_INT_RESET)) {
wait_err("timeout", state, ctrl, intr);
return -EIO;
}
return 0;
}
if (state != FL_READING) {
int result;
/* Turn interrupts on */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
syscfg |= ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
if (cpu_is_omap34xx())
/* Add a delay to let GPIO settle */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
}
INIT_COMPLETION(c->irq_done);
if (c->gpio_irq) {
result = gpio_get_value(c->gpio_irq);
if (result == -1) {
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
intr = read_reg(c, ONENAND_REG_INTERRUPT);
wait_err("gpio error", state, ctrl, intr);
return -EIO;
}
} else
result = 0;
if (result == 0) {
int retry_cnt = 0;
retry:
result = wait_for_completion_timeout(&c->irq_done,
msecs_to_jiffies(20));
if (result == 0) {
/* Timeout after 20ms */
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ONGO) {
/*
* The operation seems to be still going
* so give it some more time.
*/
retry_cnt += 1;
if (retry_cnt < 3)
goto retry;
intr = read_reg(c,
ONENAND_REG_INTERRUPT);
wait_err("timeout", state, ctrl, intr);
return -EIO;
}
intr = read_reg(c, ONENAND_REG_INTERRUPT);
if ((intr & ONENAND_INT_MASTER) == 0)
wait_warn("timeout", state, ctrl, intr);
}
}
} else {
int retry_cnt = 0;
/* Turn interrupts off */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
syscfg &= ~ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
timeout = jiffies + msecs_to_jiffies(20);
while (1) {
if (time_before(jiffies, timeout)) {
intr = read_reg(c, ONENAND_REG_INTERRUPT);
if (intr & ONENAND_INT_MASTER)
break;
} else {
/* Timeout after 20ms */
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ONGO) {
/*
* The operation seems to be still going
* so give it some more time.
*/
retry_cnt += 1;
if (retry_cnt < 3) {
timeout = jiffies +
msecs_to_jiffies(20);
continue;
}
}
break;
}
}
}
intr = read_reg(c, ONENAND_REG_INTERRUPT);
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (intr & ONENAND_INT_READ) {
int ecc = read_reg(c, ONENAND_REG_ECC_STATUS);
if (ecc) {
unsigned int addr1, addr8;
addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1);
addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8);
if (ecc & ONENAND_ECC_2BIT_ALL) {
printk(KERN_ERR "onenand_wait: ECC error = "
"0x%04x, addr1 %#x, addr8 %#x\n",
ecc, addr1, addr8);
mtd->ecc_stats.failed++;
return -EBADMSG;
} else if (ecc & ONENAND_ECC_1BIT_ALL) {
printk(KERN_NOTICE "onenand_wait: correctable "
"ECC error = 0x%04x, addr1 %#x, "
"addr8 %#x\n", ecc, addr1, addr8);
mtd->ecc_stats.corrected++;
}
}
} else if (state == FL_READING) {
wait_err("timeout", state, ctrl, intr);
return -EIO;
}
if (ctrl & ONENAND_CTRL_ERROR) {
wait_err("controller error", state, ctrl, intr);
if (ctrl & ONENAND_CTRL_LOCK)
printk(KERN_ERR "onenand_wait: "
"Device is write protected!!!\n");
return -EIO;
}
if (ctrl & 0xFE9F)
wait_warn("unexpected controller status", state, ctrl, intr);
return 0;
}
static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
{
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
return mtd->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
return 0;
}
#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
unsigned long timeout;
void *buf = (void *)buffer;
size_t xtra;
volatile unsigned *done;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
goto out_copy;
if (buf >= high_memory) {
struct page *p1;
if (((size_t)buf & PAGE_MASK) !=
((size_t)(buf + count - 1) & PAGE_MASK))
goto out_copy;
p1 = vmalloc_to_page(buf);
if (!p1)
goto out_copy;
buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
}
xtra = count & 3;
if (xtra) {
count -= xtra;
memcpy(buf + count, this->base + bram_offset + count, xtra);
}
dma_src = c->phys_base + bram_offset;
dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE);
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
goto out_copy;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count >> 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
timeout = jiffies + msecs_to_jiffies(20);
done = &c->dma_done.done;
while (time_before(jiffies, timeout))
if (*done)
break;
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
if (!*done) {
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
goto out_copy;
}
return 0;
out_copy:
memcpy(buf, this->base + bram_offset, count);
return 0;
}
static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
unsigned long timeout;
void *buf = (void *)buffer;
volatile unsigned *done;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
goto out_copy;
/* panic_write() may be in an interrupt context */
if (in_interrupt())
goto out_copy;
if (buf >= high_memory) {
struct page *p1;
if (((size_t)buf & PAGE_MASK) !=
((size_t)(buf + count - 1) & PAGE_MASK))
goto out_copy;
p1 = vmalloc_to_page(buf);
if (!p1)
goto out_copy;
buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
}
dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
dma_dst = c->phys_base + bram_offset;
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count >> 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
timeout = jiffies + msecs_to_jiffies(20);
done = &c->dma_done.done;
while (time_before(jiffies, timeout))
if (*done)
break;
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
if (!*done) {
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
goto out_copy;
}
return 0;
out_copy:
memcpy(this->base + bram_offset, buf, count);
return 0;
}
#else
int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count);
int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count);
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
if (1 || (c->dma_channel < 0) ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy(buffer, (__force void *)(this->base + bram_offset),
count);
return 0;
}
dma_src = c->phys_base + bram_offset;
dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
DMA_FROM_DEVICE);
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count / 4, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
wait_for_completion(&c->dma_done);
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
return 0;
}
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
if (1 || (c->dma_channel < 0) ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy((__force void *)(this->base + bram_offset), buffer,
count);
return 0;
}
dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
DMA_TO_DEVICE);
dma_dst = c->phys_base + bram_offset;
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
count / 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
wait_for_completion(&c->dma_done);
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
return 0;
}
#else
int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count);
int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count);
#endif
static struct platform_driver omap2_onenand_driver;
static int __adjust_timing(struct device *dev, void *data)
{
int ret = 0;
struct omap2_onenand *c;
c = dev_get_drvdata(dev);
BUG_ON(c->setup == NULL);
/* DMA is not in use so this is all that is needed */
/* Revisit for OMAP3! */
ret = c->setup(c->onenand.base, c->freq);
return ret;
}
int omap2_onenand_rephase(void)
{
return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
NULL, __adjust_timing);
}
static void __devexit omap2_onenand_shutdown(struct platform_device *pdev)
{
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
/* With certain content in the buffer RAM, the OMAP boot ROM code
* can recognize the flash chip incorrectly. Zero it out before
* soft reset.
*/
memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
}
static int __devinit omap2_onenand_probe(struct platform_device *pdev)
{
struct omap_onenand_platform_data *pdata;
struct omap2_onenand *c;
int r;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
dev_err(&pdev->dev, "platform data missing\n");
return -ENODEV;
}
c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
if (!c)
return -ENOMEM;
init_completion(&c->irq_done);
init_completion(&c->dma_done);
c->gpmc_cs = pdata->cs;
c->gpio_irq = pdata->gpio_irq;
c->dma_channel = pdata->dma_channel;
if (c->dma_channel < 0) {
/* if -1, don't use DMA */
c->gpio_irq = 0;
}
r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
if (r < 0) {
dev_err(&pdev->dev, "Cannot request GPMC CS\n");
goto err_kfree;
}
if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
pdev->dev.driver->name) == NULL) {
dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
"size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE);
r = -EBUSY;
goto err_free_cs;
}
c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
if (c->onenand.base == NULL) {
r = -ENOMEM;
goto err_release_mem_region;
}
if (pdata->onenand_setup != NULL) {
r = pdata->onenand_setup(c->onenand.base, c->freq);
if (r < 0) {
dev_err(&pdev->dev, "Onenand platform setup failed: "
"%d\n", r);
goto err_iounmap;
}
c->setup = pdata->onenand_setup;
}
if (c->gpio_irq) {
if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
}
gpio_direction_input(c->gpio_irq);
if ((r = request_irq(gpio_to_irq(c->gpio_irq),
omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
pdev->dev.driver->name, c)) < 0)
goto err_release_gpio;
}
if (c->dma_channel >= 0) {
r = omap_request_dma(0, pdev->dev.driver->name,
omap2_onenand_dma_cb, (void *) c,
&c->dma_channel);
if (r == 0) {
omap_set_dma_write_mode(c->dma_channel,
OMAP_DMA_WRITE_NON_POSTED);
omap_set_dma_src_data_pack(c->dma_channel, 1);
omap_set_dma_src_burst_mode(c->dma_channel,
OMAP_DMA_DATA_BURST_8);
omap_set_dma_dest_data_pack(c->dma_channel, 1);
omap_set_dma_dest_burst_mode(c->dma_channel,
OMAP_DMA_DATA_BURST_8);
} else {
dev_info(&pdev->dev,
"failed to allocate DMA for OneNAND, "
"using PIO instead\n");
c->dma_channel = -1;
}
}
dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
"base %p\n", c->gpmc_cs, c->phys_base,
c->onenand.base);
c->pdev = pdev;
c->mtd.name = dev_name(&pdev->dev);
c->mtd.priv = &c->onenand;
c->mtd.owner = THIS_MODULE;
if (c->dma_channel >= 0) {
struct onenand_chip *this = &c->onenand;
this->wait = omap2_onenand_wait;
if (cpu_is_omap34xx()) {
this->read_bufferram = omap3_onenand_read_bufferram;
this->write_bufferram = omap3_onenand_write_bufferram;
} else {
this->read_bufferram = omap2_onenand_read_bufferram;
this->write_bufferram = omap2_onenand_write_bufferram;
}
}
if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_dma;
switch ((c->onenand.version_id >> 4) & 0xf) {
case 0:
c->freq = 40;
break;
case 1:
c->freq = 54;
break;
case 2:
c->freq = 66;
break;
case 3:
c->freq = 83;
break;
}
#ifdef CONFIG_MTD_PARTITIONS
if (pdata->parts != NULL)
r = add_mtd_partitions(&c->mtd, pdata->parts,
pdata->nr_parts);
else
#endif
r = add_mtd_device(&c->mtd);
if (r < 0)
goto err_release_onenand;
platform_set_drvdata(pdev, c);
return 0;
err_release_onenand:
onenand_release(&c->mtd);
err_release_dma:
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
if (c->gpio_irq)
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
err_free_cs:
gpmc_cs_free(c->gpmc_cs);
err_kfree:
kfree(c);
return r;
}
static int __devexit omap2_onenand_remove(struct platform_device *pdev)
{
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
BUG_ON(c == NULL);
#ifdef CONFIG_MTD_PARTITIONS
if (c->parts)
del_mtd_partitions(&c->mtd);
else
del_mtd_device(&c->mtd);
#else
del_mtd_device(&c->mtd);
#endif
onenand_release(&c->mtd);
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
omap2_onenand_shutdown(pdev);
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
kfree(c);
return 0;
}
static struct platform_driver omap2_onenand_driver = {
.probe = omap2_onenand_probe,
.remove = omap2_onenand_remove,
.shutdown = omap2_onenand_shutdown,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
};
static int __init omap2_onenand_init(void)
{
printk(KERN_INFO "OneNAND driver initializing\n");
return platform_driver_register(&omap2_onenand_driver);
}
static void __exit omap2_onenand_exit(void)
{
platform_driver_unregister(&omap2_onenand_driver);
}
module_init(omap2_onenand_init);
module_exit(omap2_onenand_exit);
MODULE_ALIAS(DRIVER_NAME);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");