mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 08:34:20 +08:00
f0635523c8
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+2010 ('‐'): HYPHEN
as ASCII HYPHEN is preferred over U+2010
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ba8b5122ac9d4918fd966d0eb0a5ca9d89044b04.1621159997.git.mchehab+huawei@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
64 lines
1.6 KiB
ReStructuredText
64 lines
1.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver ir36021
|
|
=====================
|
|
|
|
Supported chips:
|
|
|
|
* Infineon IR36021
|
|
|
|
Prefix: ir36021
|
|
Addresses scanned: -
|
|
|
|
Datasheet: Publicly available at the Infineon website
|
|
https://www.infineon.com/dgdl/ir36021.pdf?fileId=5546d462533600a4015355d0aa2d1775
|
|
|
|
Authors:
|
|
- Chris Packham <chris.packham@alliedtelesis.co.nz>
|
|
|
|
Description
|
|
-----------
|
|
|
|
The IR36021 is a dual-loop digital multi-phase buck controller designed for
|
|
point of load applications.
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not probe for PMBus devices. You will have to instantiate
|
|
devices explicitly.
|
|
|
|
Sysfs attributes
|
|
----------------
|
|
|
|
======================= ===========================
|
|
curr1_label "iin"
|
|
curr1_input Measured input current
|
|
curr1_alarm Input fault alarm
|
|
|
|
curr2_label "iout1"
|
|
curr2_input Measured output current
|
|
curr2_alarm Output over-current alarm
|
|
|
|
in1_label "vin"
|
|
in1_input Measured input voltage
|
|
in1_alarm Input under-voltage alarm
|
|
|
|
in2_label "vout1"
|
|
in2_input Measured output voltage
|
|
in2_alarm Output over-voltage alarm
|
|
|
|
power1_label "pin"
|
|
power1_input Measured input power
|
|
power1_alarm Input under-voltage alarm
|
|
|
|
power2_label "pout1"
|
|
power2_input Measured output power
|
|
|
|
temp1_input Measured temperature
|
|
temp1_alarm Temperature alarm
|
|
|
|
temp2_input Measured other loop temperature
|
|
temp2_alarm Temperature alarm
|
|
======================= ===========================
|