korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 16:54:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
8f5a59354c
linux/sound/soc/codecs/wm9090.c
Julia Lawall f802d6c020 ASoC: constify snd_soc_codec_driver structures 
Check for snd_soc_codec_driver structures that are only passed to
snd_soc_register_codec or memcpy (2nd arg), for which the corresponding
parameters are declared const.  Declare as const snd_soc_codec_driver
structures that have these properties.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_soc_codec_driver i@p = { ... };

@ok@
identifier r.i;
expression e1,e2,e3;
position p;
@@
(
snd_soc_register_codec(e1,&i@p,e2,e3)
|
memcpy(e1,&i@p,e2)
)

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct snd_soc_codec_driver i = { ... };
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 20:55:31 +01:00

647 lines
20 KiB
C
Raw Blame History

/*
* ALSA SoC WM9090 driver
*
* Copyright 2009-12 Wolfson Microelectronics
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <sound/wm9090.h>
#include "wm9090.h"
static const struct reg_default wm9090_reg_defaults[] = {
{ 1, 0x0006 }, /* R1 - Power Management (1) */
{ 2, 0x6000 }, /* R2 - Power Management (2) */
{ 3, 0x0000 }, /* R3 - Power Management (3) */
{ 6, 0x01C0 }, /* R6 - Clocking 1 */
{ 22, 0x0003 }, /* R22 - IN1 Line Control */
{ 23, 0x0003 }, /* R23 - IN2 Line Control */
{ 24, 0x0083 }, /* R24 - IN1 Line Input A Volume */
{ 25, 0x0083 }, /* R25 - IN1 Line Input B Volume */
{ 26, 0x0083 }, /* R26 - IN2 Line Input A Volume */
{ 27, 0x0083 }, /* R27 - IN2 Line Input B Volume */
{ 28, 0x002D }, /* R28 - Left Output Volume */
{ 29, 0x002D }, /* R29 - Right Output Volume */
{ 34, 0x0100 }, /* R34 - SPKMIXL Attenuation */
{ 35, 0x0010 }, /* R36 - SPKOUT Mixers */
{ 37, 0x0140 }, /* R37 - ClassD3 */
{ 38, 0x0039 }, /* R38 - Speaker Volume Left */
{ 45, 0x0000 }, /* R45 - Output Mixer1 */
{ 46, 0x0000 }, /* R46 - Output Mixer2 */
{ 47, 0x0100 }, /* R47 - Output Mixer3 */
{ 48, 0x0100 }, /* R48 - Output Mixer4 */
{ 54, 0x0000 }, /* R54 - Speaker Mixer */
{ 57, 0x000D }, /* R57 - AntiPOP2 */
{ 70, 0x0000 }, /* R70 - Write Sequencer 0 */
{ 71, 0x0000 }, /* R71 - Write Sequencer 1 */
{ 72, 0x0000 }, /* R72 - Write Sequencer 2 */
{ 73, 0x0000 }, /* R73 - Write Sequencer 3 */
{ 74, 0x0000 }, /* R74 - Write Sequencer 4 */
{ 75, 0x0000 }, /* R75 - Write Sequencer 5 */
{ 76, 0x1F25 }, /* R76 - Charge Pump 1 */
{ 85, 0x054A }, /* R85 - DC Servo 1 */
{ 87, 0x0000 }, /* R87 - DC Servo 3 */
{ 96, 0x0100 }, /* R96 - Analogue HP 0 */
{ 98, 0x8640 }, /* R98 - AGC Control 0 */
{ 99, 0xC000 }, /* R99 - AGC Control 1 */
{ 100, 0x0200 }, /* R100 - AGC Control 2 */
};
/* This struct is used to save the context */
struct wm9090_priv {
struct wm9090_platform_data pdata;
struct regmap *regmap;
};
static bool wm9090_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM9090_SOFTWARE_RESET:
case WM9090_DC_SERVO_0:
case WM9090_DC_SERVO_READBACK_0:
case WM9090_DC_SERVO_READBACK_1:
case WM9090_DC_SERVO_READBACK_2:
return true;
default:
return false;
}
}
static bool wm9090_readable(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM9090_SOFTWARE_RESET:
case WM9090_POWER_MANAGEMENT_1:
case WM9090_POWER_MANAGEMENT_2:
case WM9090_POWER_MANAGEMENT_3:
case WM9090_CLOCKING_1:
case WM9090_IN1_LINE_CONTROL:
case WM9090_IN2_LINE_CONTROL:
case WM9090_IN1_LINE_INPUT_A_VOLUME:
case WM9090_IN1_LINE_INPUT_B_VOLUME:
case WM9090_IN2_LINE_INPUT_A_VOLUME:
case WM9090_IN2_LINE_INPUT_B_VOLUME:
case WM9090_LEFT_OUTPUT_VOLUME:
case WM9090_RIGHT_OUTPUT_VOLUME:
case WM9090_SPKMIXL_ATTENUATION:
case WM9090_SPKOUT_MIXERS:
case WM9090_CLASSD3:
case WM9090_SPEAKER_VOLUME_LEFT:
case WM9090_OUTPUT_MIXER1:
case WM9090_OUTPUT_MIXER2:
case WM9090_OUTPUT_MIXER3:
case WM9090_OUTPUT_MIXER4:
case WM9090_SPEAKER_MIXER:
case WM9090_ANTIPOP2:
case WM9090_WRITE_SEQUENCER_0:
case WM9090_WRITE_SEQUENCER_1:
case WM9090_WRITE_SEQUENCER_2:
case WM9090_WRITE_SEQUENCER_3:
case WM9090_WRITE_SEQUENCER_4:
case WM9090_WRITE_SEQUENCER_5:
case WM9090_CHARGE_PUMP_1:
case WM9090_DC_SERVO_0:
case WM9090_DC_SERVO_1:
case WM9090_DC_SERVO_3:
case WM9090_DC_SERVO_READBACK_0:
case WM9090_DC_SERVO_READBACK_1:
case WM9090_DC_SERVO_READBACK_2:
case WM9090_ANALOGUE_HP_0:
case WM9090_AGC_CONTROL_0:
case WM9090_AGC_CONTROL_1:
case WM9090_AGC_CONTROL_2:
return true;
default:
return false;
}
}
static void wait_for_dc_servo(struct snd_soc_codec *codec)
{
unsigned int reg;
int count = 0;
dev_dbg(codec->dev, "Waiting for DC servo...\n");
do {
count++;
msleep(1);
reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0);
dev_dbg(codec->dev, "DC servo status: %x\n", reg);
} while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK)
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
}
static const DECLARE_TLV_DB_RANGE(in_tlv,
0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0),
1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0),
4, 6, TLV_DB_SCALE_ITEM(600, 600, 0)
);
static const DECLARE_TLV_DB_RANGE(mix_tlv,
0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0),
3, 3, TLV_DB_SCALE_ITEM(0, 0, 0)
);
static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
static const DECLARE_TLV_DB_RANGE(spkboost_tlv,
0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0)
);
static const struct snd_kcontrol_new wm9090_controls[] = {
SOC_SINGLE_TLV("IN1A Volume", WM9090_IN1_LINE_INPUT_A_VOLUME, 0, 6, 0,
in_tlv),
SOC_SINGLE("IN1A Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 7, 1, 1),
SOC_SINGLE("IN1A ZC Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 6, 1, 0),
SOC_SINGLE_TLV("IN2A Volume", WM9090_IN2_LINE_INPUT_A_VOLUME, 0, 6, 0,
in_tlv),
SOC_SINGLE("IN2A Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 7, 1, 1),
SOC_SINGLE("IN2A ZC Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 6, 1, 0),
SOC_SINGLE("MIXOUTL Switch", WM9090_OUTPUT_MIXER3, 8, 1, 1),
SOC_SINGLE_TLV("MIXOUTL IN1A Volume", WM9090_OUTPUT_MIXER3, 6, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("MIXOUTL IN2A Volume", WM9090_OUTPUT_MIXER3, 2, 3, 1,
mix_tlv),
SOC_SINGLE("MIXOUTR Switch", WM9090_OUTPUT_MIXER4, 8, 1, 1),
SOC_SINGLE_TLV("MIXOUTR IN1A Volume", WM9090_OUTPUT_MIXER4, 6, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("MIXOUTR IN2A Volume", WM9090_OUTPUT_MIXER4, 2, 3, 1,
mix_tlv),
SOC_SINGLE("SPKMIX Switch", WM9090_SPKMIXL_ATTENUATION, 8, 1, 1),
SOC_SINGLE_TLV("SPKMIX IN1A Volume", WM9090_SPKMIXL_ATTENUATION, 6, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("SPKMIX IN2A Volume", WM9090_SPKMIXL_ATTENUATION, 2, 3, 1,
mix_tlv),
SOC_DOUBLE_R_TLV("Headphone Volume", WM9090_LEFT_OUTPUT_VOLUME,
WM9090_RIGHT_OUTPUT_VOLUME, 0, 63, 0, out_tlv),
SOC_DOUBLE_R("Headphone Switch", WM9090_LEFT_OUTPUT_VOLUME,
WM9090_RIGHT_OUTPUT_VOLUME, 6, 1, 1),
SOC_DOUBLE_R("Headphone ZC Switch", WM9090_LEFT_OUTPUT_VOLUME,
WM9090_RIGHT_OUTPUT_VOLUME, 7, 1, 0),
SOC_SINGLE_TLV("Speaker Volume", WM9090_SPEAKER_VOLUME_LEFT, 0, 63, 0,
out_tlv),
SOC_SINGLE("Speaker Switch", WM9090_SPEAKER_VOLUME_LEFT, 6, 1, 1),
SOC_SINGLE("Speaker ZC Switch", WM9090_SPEAKER_VOLUME_LEFT, 7, 1, 0),
SOC_SINGLE_TLV("Speaker Boost Volume", WM9090_CLASSD3, 3, 7, 0, spkboost_tlv),
};
static const struct snd_kcontrol_new wm9090_in1_se_controls[] = {
SOC_SINGLE_TLV("IN1B Volume", WM9090_IN1_LINE_INPUT_B_VOLUME, 0, 6, 0,
in_tlv),
SOC_SINGLE("IN1B Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 7, 1, 1),
SOC_SINGLE("IN1B ZC Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 6, 1, 0),
SOC_SINGLE_TLV("SPKMIX IN1B Volume", WM9090_SPKMIXL_ATTENUATION, 4, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("MIXOUTL IN1B Volume", WM9090_OUTPUT_MIXER3, 4, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("MIXOUTR IN1B Volume", WM9090_OUTPUT_MIXER4, 4, 3, 1,
mix_tlv),
};
static const struct snd_kcontrol_new wm9090_in2_se_controls[] = {
SOC_SINGLE_TLV("IN2B Volume", WM9090_IN2_LINE_INPUT_B_VOLUME, 0, 6, 0,
in_tlv),
SOC_SINGLE("IN2B Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 7, 1, 1),
SOC_SINGLE("IN2B ZC Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 6, 1, 0),
SOC_SINGLE_TLV("SPKMIX IN2B Volume", WM9090_SPKMIXL_ATTENUATION, 0, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("MIXOUTL IN2B Volume", WM9090_OUTPUT_MIXER3, 0, 3, 1,
mix_tlv),
SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1,
mix_tlv),
};
static int hp_ev(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, WM9090_CP_ENA);
msleep(5);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
/* Start the DC servo. We don't currently use the
* ability to save the state since we don't have full
* control of the analogue paths and they can change
* DC offsets; see the WM8904 driver for an example of
* doing so.
*/
snd_soc_write(codec, WM9090_DC_SERVO_0,
WM9090_DCS_ENA_CHAN_0 |
WM9090_DCS_ENA_CHAN_1 |
WM9090_DCS_TRIG_STARTUP_1 |
WM9090_DCS_TRIG_STARTUP_0);
wait_for_dc_servo(codec);
reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
break;
case SND_SOC_DAPM_PRE_PMD:
reg &= ~(WM9090_HPOUT1L_RMV_SHORT |
WM9090_HPOUT1L_DLY |
WM9090_HPOUT1L_OUTP |
WM9090_HPOUT1R_RMV_SHORT |
WM9090_HPOUT1R_DLY |
WM9090_HPOUT1R_OUTP);
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
snd_soc_write(codec, WM9090_DC_SERVO_0, 0);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
0);
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, 0);
break;
}
return 0;
}
static const struct snd_kcontrol_new spkmix[] = {
SOC_DAPM_SINGLE("IN1A Switch", WM9090_SPEAKER_MIXER, 6, 1, 0),
SOC_DAPM_SINGLE("IN1B Switch", WM9090_SPEAKER_MIXER, 4, 1, 0),
SOC_DAPM_SINGLE("IN2A Switch", WM9090_SPEAKER_MIXER, 2, 1, 0),
SOC_DAPM_SINGLE("IN2B Switch", WM9090_SPEAKER_MIXER, 0, 1, 0),
};
static const struct snd_kcontrol_new spkout[] = {
SOC_DAPM_SINGLE("Mixer Switch", WM9090_SPKOUT_MIXERS, 4, 1, 0),
};
static const struct snd_kcontrol_new mixoutl[] = {
SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER1, 6, 1, 0),
SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER1, 4, 1, 0),
SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER1, 2, 1, 0),
SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER1, 0, 1, 0),
};
static const struct snd_kcontrol_new mixoutr[] = {
SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER2, 6, 1, 0),
SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER2, 4, 1, 0),
SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER2, 2, 1, 0),
SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER2, 0, 1, 0),
};
static const struct snd_soc_dapm_widget wm9090_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("IN1+"),
SND_SOC_DAPM_INPUT("IN1-"),
SND_SOC_DAPM_INPUT("IN2+"),
SND_SOC_DAPM_INPUT("IN2-"),
SND_SOC_DAPM_SUPPLY("OSC", WM9090_POWER_MANAGEMENT_1, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN1A PGA", WM9090_POWER_MANAGEMENT_2, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN1B PGA", WM9090_POWER_MANAGEMENT_2, 6, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN2A PGA", WM9090_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN2B PGA", WM9090_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
SND_SOC_DAPM_MIXER("SPKMIX", WM9090_POWER_MANAGEMENT_3, 3, 0,
spkmix, ARRAY_SIZE(spkmix)),
SND_SOC_DAPM_MIXER("MIXOUTL", WM9090_POWER_MANAGEMENT_3, 5, 0,
mixoutl, ARRAY_SIZE(mixoutl)),
SND_SOC_DAPM_MIXER("MIXOUTR", WM9090_POWER_MANAGEMENT_3, 4, 0,
mixoutr, ARRAY_SIZE(mixoutr)),
SND_SOC_DAPM_PGA_E("HP PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
hp_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA("SPKPGA", WM9090_POWER_MANAGEMENT_3, 8, 0, NULL, 0),
SND_SOC_DAPM_MIXER("SPKOUT", WM9090_POWER_MANAGEMENT_1, 12, 0,
spkout, ARRAY_SIZE(spkout)),
SND_SOC_DAPM_OUTPUT("HPR"),
SND_SOC_DAPM_OUTPUT("HPL"),
SND_SOC_DAPM_OUTPUT("Speaker"),
};
static const struct snd_soc_dapm_route audio_map[] = {
{ "IN1A PGA", NULL, "IN1+" },
{ "IN2A PGA", NULL, "IN2+" },
{ "SPKMIX", "IN1A Switch", "IN1A PGA" },
{ "SPKMIX", "IN2A Switch", "IN2A PGA" },
{ "MIXOUTL", "IN1A Switch", "IN1A PGA" },
{ "MIXOUTL", "IN2A Switch", "IN2A PGA" },
{ "MIXOUTR", "IN1A Switch", "IN1A PGA" },
{ "MIXOUTR", "IN2A Switch", "IN2A PGA" },
{ "HP PGA", NULL, "OSC" },
{ "HP PGA", NULL, "MIXOUTL" },
{ "HP PGA", NULL, "MIXOUTR" },
{ "HPL", NULL, "HP PGA" },
{ "HPR", NULL, "HP PGA" },
{ "SPKPGA", NULL, "OSC" },
{ "SPKPGA", NULL, "SPKMIX" },
{ "SPKOUT", "Mixer Switch", "SPKPGA" },
{ "Speaker", NULL, "SPKOUT" },
};
static const struct snd_soc_dapm_route audio_map_in1_se[] = {
{ "IN1B PGA", NULL, "IN1-" },
{ "SPKMIX", "IN1B Switch", "IN1B PGA" },
{ "MIXOUTL", "IN1B Switch", "IN1B PGA" },
{ "MIXOUTR", "IN1B Switch", "IN1B PGA" },
};
static const struct snd_soc_dapm_route audio_map_in1_diff[] = {
{ "IN1A PGA", NULL, "IN1-" },
};
static const struct snd_soc_dapm_route audio_map_in2_se[] = {
{ "IN2B PGA", NULL, "IN2-" },
{ "SPKMIX", "IN2B Switch", "IN2B PGA" },
{ "MIXOUTL", "IN2B Switch", "IN2B PGA" },
{ "MIXOUTR", "IN2B Switch", "IN2B PGA" },
};
static const struct snd_soc_dapm_route audio_map_in2_diff[] = {
{ "IN2A PGA", NULL, "IN2-" },
};
static int wm9090_add_controls(struct snd_soc_codec *codec)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
int i;
snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
ARRAY_SIZE(wm9090_dapm_widgets));
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
snd_soc_add_codec_controls(codec, wm9090_controls,
ARRAY_SIZE(wm9090_controls));
if (wm9090->pdata.lin1_diff) {
snd_soc_dapm_add_routes(dapm, audio_map_in1_diff,
ARRAY_SIZE(audio_map_in1_diff));
} else {
snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
ARRAY_SIZE(audio_map_in1_se));
snd_soc_add_codec_controls(codec, wm9090_in1_se_controls,
ARRAY_SIZE(wm9090_in1_se_controls));
}
if (wm9090->pdata.lin2_diff) {
snd_soc_dapm_add_routes(dapm, audio_map_in2_diff,
ARRAY_SIZE(audio_map_in2_diff));
} else {
snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
ARRAY_SIZE(audio_map_in2_se));
snd_soc_add_codec_controls(codec, wm9090_in2_se_controls,
ARRAY_SIZE(wm9090_in2_se_controls));
}
if (wm9090->pdata.agc_ena) {
for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i,
wm9090->pdata.agc[i]);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, WM9090_AGC_ENA);
} else {
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, 0);
}
return 0;
}
/*
* The machine driver should call this from their set_bias_level; if there
* isn't one then this can just be set as the set_bias_level function.
*/
static int wm9090_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA,
WM9090_VMID_ENA);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA |
WM9090_VMID_RES_MASK,
WM9090_BIAS_ENA |
1 << WM9090_VMID_RES_SHIFT);
msleep(1); /* Probably an overestimate */
break;
case SND_SOC_BIAS_STANDBY:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
/* Restore the register cache */
regcache_sync(wm9090->regmap);
}
/* We keep VMID off during standby since the combination of
* ground referenced outputs and class D speaker mean that
* latency is not an issue.
*/
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
snd_soc_update_bits(codec, WM9090_ANTIPOP2,
WM9090_VMID_ENA, 0);
break;
case SND_SOC_BIAS_OFF:
break;
}
return 0;
}
static int wm9090_probe(struct snd_soc_codec *codec)
{
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
WM9090_IN1_VU | WM9090_IN1A_ZC,
WM9090_IN1_VU | WM9090_IN1A_ZC);
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
WM9090_IN1_VU | WM9090_IN1B_ZC,
WM9090_IN1_VU | WM9090_IN1B_ZC);
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
WM9090_IN2_VU | WM9090_IN2A_ZC,
WM9090_IN2_VU | WM9090_IN2A_ZC);
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
WM9090_IN2_VU | WM9090_IN2B_ZC,
WM9090_IN2_VU | WM9090_IN2B_ZC);
snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
snd_soc_update_bits(codec, WM9090_CLOCKING_1,
WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
wm9090_add_controls(codec);
return 0;
}
static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = {
.probe = wm9090_probe,
.set_bias_level = wm9090_set_bias_level,
.suspend_bias_off = true,
};
static const struct regmap_config wm9090_regmap = {
.reg_bits = 8,
.val_bits = 16,
.max_register = WM9090_MAX_REGISTER,
.volatile_reg = wm9090_volatile,
.readable_reg = wm9090_readable,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = wm9090_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm9090_reg_defaults),
};
static int wm9090_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm9090_priv *wm9090;
unsigned int reg;
int ret;
wm9090 = devm_kzalloc(&i2c->dev, sizeof(*wm9090), GFP_KERNEL);
if (!wm9090)
return -ENOMEM;
wm9090->regmap = devm_regmap_init_i2c(i2c, &wm9090_regmap);
if (IS_ERR(wm9090->regmap)) {
ret = PTR_ERR(wm9090->regmap);
dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
return ret;
}
ret = regmap_read(wm9090->regmap, WM9090_SOFTWARE_RESET, &reg);
if (ret < 0)
return ret;
if (reg != 0x9093) {
dev_err(&i2c->dev, "Device is not a WM9090, ID=%x\n", reg);
return -ENODEV;
}
ret = regmap_write(wm9090->regmap, WM9090_SOFTWARE_RESET, 0);
if (ret < 0)
return ret;
if (i2c->dev.platform_data)
memcpy(&wm9090->pdata, i2c->dev.platform_data,
sizeof(wm9090->pdata));
i2c_set_clientdata(i2c, wm9090);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm9090, NULL, 0);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
return ret;
}
return 0;
}
static int wm9090_i2c_remove(struct i2c_client *i2c)
{
snd_soc_unregister_codec(&i2c->dev);
return 0;
}
static const struct i2c_device_id wm9090_id[] = {
{ "wm9090", 0 },
{ "wm9093", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm9090_id);
static struct i2c_driver wm9090_i2c_driver = {
.driver = {
.name = "wm9090",
},
.probe = wm9090_i2c_probe,
.remove = wm9090_i2c_remove,
.id_table = wm9090_id,
};
module_i2c_driver(wm9090_i2c_driver);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM9090 ASoC driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink