korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-16 07:24:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
8f50e35815
linux/drivers/pinctrl/nomadik/pinctrl-nomadik-stn8815.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

355 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-nomadik.h"
/* All the pins that can be used for GPIO and some other functions */
#define _GPIO(offset) (offset)
#define STN8815_PIN_B4 _GPIO(0)
#define STN8815_PIN_D5 _GPIO(1)
#define STN8815_PIN_C5 _GPIO(2)
#define STN8815_PIN_A4 _GPIO(3)
#define STN8815_PIN_B5 _GPIO(4)
#define STN8815_PIN_D6 _GPIO(5)
#define STN8815_PIN_C6 _GPIO(6)
#define STN8815_PIN_B6 _GPIO(7)
#define STN8815_PIN_B10 _GPIO(8)
#define STN8815_PIN_A10 _GPIO(9)
#define STN8815_PIN_C11 _GPIO(10)
#define STN8815_PIN_B11 _GPIO(11)
#define STN8815_PIN_A11 _GPIO(12)
#define STN8815_PIN_C12 _GPIO(13)
#define STN8815_PIN_B12 _GPIO(14)
#define STN8815_PIN_A12 _GPIO(15)
#define STN8815_PIN_C13 _GPIO(16)
#define STN8815_PIN_B13 _GPIO(17)
#define STN8815_PIN_A13 _GPIO(18)
#define STN8815_PIN_D13 _GPIO(19)
#define STN8815_PIN_C14 _GPIO(20)
#define STN8815_PIN_B14 _GPIO(21)
#define STN8815_PIN_A14 _GPIO(22)
#define STN8815_PIN_D15 _GPIO(23)
#define STN8815_PIN_C15 _GPIO(24)
#define STN8815_PIN_B15 _GPIO(25)
#define STN8815_PIN_A15 _GPIO(26)
#define STN8815_PIN_C16 _GPIO(27)
#define STN8815_PIN_B16 _GPIO(28)
#define STN8815_PIN_A16 _GPIO(29)
#define STN8815_PIN_D17 _GPIO(30)
#define STN8815_PIN_C17 _GPIO(31)
#define STN8815_PIN_AB6 _GPIO(32)
#define STN8815_PIN_AA6 _GPIO(33)
#define STN8815_PIN_Y6 _GPIO(34)
#define STN8815_PIN_Y5 _GPIO(35)
#define STN8815_PIN_AA5 _GPIO(36)
#define STN8815_PIN_AB5 _GPIO(37)
#define STN8815_PIN_AB4 _GPIO(38)
#define STN8815_PIN_Y4 _GPIO(39)
#define STN8815_PIN_R1 _GPIO(40)
#define STN8815_PIN_R2 _GPIO(41)
#define STN8815_PIN_R3 _GPIO(42)
#define STN8815_PIN_P1 _GPIO(43)
#define STN8815_PIN_P2 _GPIO(44)
#define STN8815_PIN_P3 _GPIO(45)
#define STN8815_PIN_N1 _GPIO(46)
#define STN8815_PIN_N2 _GPIO(47)
#define STN8815_PIN_N3 _GPIO(48)
#define STN8815_PIN_M1 _GPIO(49)
#define STN8815_PIN_M3 _GPIO(50)
#define STN8815_PIN_M2 _GPIO(51)
#define STN8815_PIN_L1 _GPIO(52)
#define STN8815_PIN_L4 _GPIO(53)
#define STN8815_PIN_L3 _GPIO(54)
#define STN8815_PIN_L2 _GPIO(55)
#define STN8815_PIN_F3 _GPIO(56)
#define STN8815_PIN_F2 _GPIO(57)
#define STN8815_PIN_E1 _GPIO(58)
#define STN8815_PIN_E3 _GPIO(59)
#define STN8815_PIN_E2 _GPIO(60)
#define STN8815_PIN_E4 _GPIO(61)
#define STN8815_PIN_D3 _GPIO(62)
#define STN8815_PIN_D2 _GPIO(63)
#define STN8815_PIN_F21 _GPIO(64)
#define STN8815_PIN_F20 _GPIO(65)
#define STN8815_PIN_E22 _GPIO(66)
#define STN8815_PIN_D22 _GPIO(67)
#define STN8815_PIN_E21 _GPIO(68)
#define STN8815_PIN_E20 _GPIO(69)
#define STN8815_PIN_C22 _GPIO(70)
#define STN8815_PIN_D21 _GPIO(71)
#define STN8815_PIN_D20 _GPIO(72)
#define STN8815_PIN_C21 _GPIO(73)
#define STN8815_PIN_C20 _GPIO(74)
#define STN8815_PIN_C19 _GPIO(75)
#define STN8815_PIN_B20 _GPIO(76)
#define STN8815_PIN_B8 _GPIO(77)
#define STN8815_PIN_A8 _GPIO(78)
#define STN8815_PIN_C9 _GPIO(79)
#define STN8815_PIN_B9 _GPIO(80)
#define STN8815_PIN_A9 _GPIO(81)
#define STN8815_PIN_C10 _GPIO(82)
#define STN8815_PIN_K1 _GPIO(83)
#define STN8815_PIN_K3 _GPIO(84)
#define STN8815_PIN_K2 _GPIO(85)
#define STN8815_PIN_J1 _GPIO(86)
#define STN8815_PIN_J3 _GPIO(87)
#define STN8815_PIN_J2 _GPIO(88)
#define STN8815_PIN_H1 _GPIO(89)
#define STN8815_PIN_H3 _GPIO(90)
#define STN8815_PIN_H2 _GPIO(91)
#define STN8815_PIN_G1 _GPIO(92)
#define STN8815_PIN_G3 _GPIO(93)
#define STN8815_PIN_G2 _GPIO(94)
#define STN8815_PIN_F1 _GPIO(95)
#define STN8815_PIN_T20 _GPIO(96)
#define STN8815_PIN_R21 _GPIO(97)
#define STN8815_PIN_R20 _GPIO(98)
#define STN8815_PIN_U22 _GPIO(99)
#define STN8815_PIN_N21 _GPIO(100)
#define STN8815_PIN_N20 _GPIO(101)
#define STN8815_PIN_P22 _GPIO(102)
#define STN8815_PIN_N22 _GPIO(103)
#define STN8815_PIN_V22 _GPIO(104)
#define STN8815_PIN_V21 _GPIO(105)
#define STN8815_PIN_K22 _GPIO(106)
#define STN8815_PIN_K21 _GPIO(107)
#define STN8815_PIN_H20 _GPIO(108)
#define STN8815_PIN_G20 _GPIO(109)
#define STN8815_PIN_L21 _GPIO(110)
#define STN8815_PIN_H21 _GPIO(111)
#define STN8815_PIN_J21 _GPIO(112)
#define STN8815_PIN_H22 _GPIO(113)
#define STN8815_PIN_K20 _GPIO(114)
#define STN8815_PIN_L22 _GPIO(115)
#define STN8815_PIN_G21 _GPIO(116)
#define STN8815_PIN_J20 _GPIO(117)
#define STN8815_PIN_G22 _GPIO(118)
#define STN8815_PIN_U19 _GPIO(119)
#define STN8815_PIN_G19 _GPIO(120)
#define STN8815_PIN_M22 _GPIO(121)
#define STN8815_PIN_M19 _GPIO(122)
#define STN8815_PIN_J22 _GPIO(123)
/* GPIOs 124-127 not routed to pins */
/*
* The names of the pins are denoted by GPIO number and ball name, even
* though they can be used for other things than GPIO, this is the first
* column in the table of the data sheet and often used on schematics and
* such.
*/
static const struct pinctrl_pin_desc nmk_stn8815_pins[] = {
PINCTRL_PIN(STN8815_PIN_B4, "GPIO0_B4"),
PINCTRL_PIN(STN8815_PIN_D5, "GPIO1_D5"),
PINCTRL_PIN(STN8815_PIN_C5, "GPIO2_C5"),
PINCTRL_PIN(STN8815_PIN_A4, "GPIO3_A4"),
PINCTRL_PIN(STN8815_PIN_B5, "GPIO4_B5"),
PINCTRL_PIN(STN8815_PIN_D6, "GPIO5_D6"),
PINCTRL_PIN(STN8815_PIN_C6, "GPIO6_C6"),
PINCTRL_PIN(STN8815_PIN_B6, "GPIO7_B6"),
PINCTRL_PIN(STN8815_PIN_B10, "GPIO8_B10"),
PINCTRL_PIN(STN8815_PIN_A10, "GPIO9_A10"),
PINCTRL_PIN(STN8815_PIN_C11, "GPIO10_C11"),
PINCTRL_PIN(STN8815_PIN_B11, "GPIO11_B11"),
PINCTRL_PIN(STN8815_PIN_A11, "GPIO12_A11"),
PINCTRL_PIN(STN8815_PIN_C12, "GPIO13_C12"),
PINCTRL_PIN(STN8815_PIN_B12, "GPIO14_B12"),
PINCTRL_PIN(STN8815_PIN_A12, "GPIO15_A12"),
PINCTRL_PIN(STN8815_PIN_C13, "GPIO16_C13"),
PINCTRL_PIN(STN8815_PIN_B13, "GPIO17_B13"),
PINCTRL_PIN(STN8815_PIN_A13, "GPIO18_A13"),
PINCTRL_PIN(STN8815_PIN_D13, "GPIO19_D13"),
PINCTRL_PIN(STN8815_PIN_C14, "GPIO20_C14"),
PINCTRL_PIN(STN8815_PIN_B14, "GPIO21_B14"),
PINCTRL_PIN(STN8815_PIN_A14, "GPIO22_A14"),
PINCTRL_PIN(STN8815_PIN_D15, "GPIO23_D15"),
PINCTRL_PIN(STN8815_PIN_C15, "GPIO24_C15"),
PINCTRL_PIN(STN8815_PIN_B15, "GPIO25_B15"),
PINCTRL_PIN(STN8815_PIN_A15, "GPIO26_A15"),
PINCTRL_PIN(STN8815_PIN_C16, "GPIO27_C16"),
PINCTRL_PIN(STN8815_PIN_B16, "GPIO28_B16"),
PINCTRL_PIN(STN8815_PIN_A16, "GPIO29_A16"),
PINCTRL_PIN(STN8815_PIN_D17, "GPIO30_D17"),
PINCTRL_PIN(STN8815_PIN_C17, "GPIO31_C17"),
PINCTRL_PIN(STN8815_PIN_AB6, "GPIO32_AB6"),
PINCTRL_PIN(STN8815_PIN_AA6, "GPIO33_AA6"),
PINCTRL_PIN(STN8815_PIN_Y6, "GPIO34_Y6"),
PINCTRL_PIN(STN8815_PIN_Y5, "GPIO35_Y5"),
PINCTRL_PIN(STN8815_PIN_AA5, "GPIO36_AA5"),
PINCTRL_PIN(STN8815_PIN_AB5, "GPIO37_AB5"),
PINCTRL_PIN(STN8815_PIN_AB4, "GPIO38_AB4"),
PINCTRL_PIN(STN8815_PIN_Y4, "GPIO39_Y4"),
PINCTRL_PIN(STN8815_PIN_R1, "GPIO40_R1"),
PINCTRL_PIN(STN8815_PIN_R2, "GPIO41_R2"),
PINCTRL_PIN(STN8815_PIN_R3, "GPIO42_R3"),
PINCTRL_PIN(STN8815_PIN_P1, "GPIO43_P1"),
PINCTRL_PIN(STN8815_PIN_P2, "GPIO44_P2"),
PINCTRL_PIN(STN8815_PIN_P3, "GPIO45_P3"),
PINCTRL_PIN(STN8815_PIN_N1, "GPIO46_N1"),
PINCTRL_PIN(STN8815_PIN_N2, "GPIO47_N2"),
PINCTRL_PIN(STN8815_PIN_N3, "GPIO48_N3"),
PINCTRL_PIN(STN8815_PIN_M1, "GPIO49_M1"),
PINCTRL_PIN(STN8815_PIN_M3, "GPIO50_M3"),
PINCTRL_PIN(STN8815_PIN_M2, "GPIO51_M2"),
PINCTRL_PIN(STN8815_PIN_L1, "GPIO52_L1"),
PINCTRL_PIN(STN8815_PIN_L4, "GPIO53_L4"),
PINCTRL_PIN(STN8815_PIN_L3, "GPIO54_L3"),
PINCTRL_PIN(STN8815_PIN_L2, "GPIO55_L2"),
PINCTRL_PIN(STN8815_PIN_F3, "GPIO56_F3"),
PINCTRL_PIN(STN8815_PIN_F2, "GPIO57_F2"),
PINCTRL_PIN(STN8815_PIN_E1, "GPIO58_E1"),
PINCTRL_PIN(STN8815_PIN_E3, "GPIO59_E3"),
PINCTRL_PIN(STN8815_PIN_E2, "GPIO60_E2"),
PINCTRL_PIN(STN8815_PIN_E4, "GPIO61_E4"),
PINCTRL_PIN(STN8815_PIN_D3, "GPIO62_D3"),
PINCTRL_PIN(STN8815_PIN_D2, "GPIO63_D2"),
PINCTRL_PIN(STN8815_PIN_F21, "GPIO64_F21"),
PINCTRL_PIN(STN8815_PIN_F20, "GPIO65_F20"),
PINCTRL_PIN(STN8815_PIN_E22, "GPIO66_E22"),
PINCTRL_PIN(STN8815_PIN_D22, "GPIO67_D22"),
PINCTRL_PIN(STN8815_PIN_E21, "GPIO68_E21"),
PINCTRL_PIN(STN8815_PIN_E20, "GPIO69_E20"),
PINCTRL_PIN(STN8815_PIN_C22, "GPIO70_C22"),
PINCTRL_PIN(STN8815_PIN_D21, "GPIO71_D21"),
PINCTRL_PIN(STN8815_PIN_D20, "GPIO72_D20"),
PINCTRL_PIN(STN8815_PIN_C21, "GPIO73_C21"),
PINCTRL_PIN(STN8815_PIN_C20, "GPIO74_C20"),
PINCTRL_PIN(STN8815_PIN_C19, "GPIO75_C19"),
PINCTRL_PIN(STN8815_PIN_B20, "GPIO76_B20"),
PINCTRL_PIN(STN8815_PIN_B8, "GPIO77_B8"),
PINCTRL_PIN(STN8815_PIN_A8, "GPIO78_A8"),
PINCTRL_PIN(STN8815_PIN_C9, "GPIO79_C9"),
PINCTRL_PIN(STN8815_PIN_B9, "GPIO80_B9"),
PINCTRL_PIN(STN8815_PIN_A9, "GPIO81_A9"),
PINCTRL_PIN(STN8815_PIN_C10, "GPIO82_C10"),
PINCTRL_PIN(STN8815_PIN_K1, "GPIO83_K1"),
PINCTRL_PIN(STN8815_PIN_K3, "GPIO84_K3"),
PINCTRL_PIN(STN8815_PIN_K2, "GPIO85_K2"),
PINCTRL_PIN(STN8815_PIN_J1, "GPIO86_J1"),
PINCTRL_PIN(STN8815_PIN_J3, "GPIO87_J3"),
PINCTRL_PIN(STN8815_PIN_J2, "GPIO88_J2"),
PINCTRL_PIN(STN8815_PIN_H1, "GPIO89_H1"),
PINCTRL_PIN(STN8815_PIN_H3, "GPIO90_H3"),
PINCTRL_PIN(STN8815_PIN_H2, "GPIO91_H2"),
PINCTRL_PIN(STN8815_PIN_G1, "GPIO92_G1"),
PINCTRL_PIN(STN8815_PIN_G3, "GPIO93_G3"),
PINCTRL_PIN(STN8815_PIN_G2, "GPIO94_G2"),
PINCTRL_PIN(STN8815_PIN_F1, "GPIO95_F1"),
PINCTRL_PIN(STN8815_PIN_T20, "GPIO96_T20"),
PINCTRL_PIN(STN8815_PIN_R21, "GPIO97_R21"),
PINCTRL_PIN(STN8815_PIN_R20, "GPIO98_R20"),
PINCTRL_PIN(STN8815_PIN_U22, "GPIO99_U22"),
PINCTRL_PIN(STN8815_PIN_N21, "GPIO100_N21"),
PINCTRL_PIN(STN8815_PIN_N20, "GPIO101_N20"),
PINCTRL_PIN(STN8815_PIN_P22, "GPIO102_P22"),
PINCTRL_PIN(STN8815_PIN_N22, "GPIO103_N22"),
PINCTRL_PIN(STN8815_PIN_V22, "GPIO104_V22"),
PINCTRL_PIN(STN8815_PIN_V21, "GPIO105_V21"),
PINCTRL_PIN(STN8815_PIN_K22, "GPIO106_K22"),
PINCTRL_PIN(STN8815_PIN_K21, "GPIO107_K21"),
PINCTRL_PIN(STN8815_PIN_H20, "GPIO108_H20"),
PINCTRL_PIN(STN8815_PIN_G20, "GPIO109_G20"),
PINCTRL_PIN(STN8815_PIN_L21, "GPIO110_L21"),
PINCTRL_PIN(STN8815_PIN_H21, "GPIO111_H21"),
PINCTRL_PIN(STN8815_PIN_J21, "GPIO112_J21"),
PINCTRL_PIN(STN8815_PIN_H22, "GPIO113_H22"),
PINCTRL_PIN(STN8815_PIN_K20, "GPIO114_K20"),
PINCTRL_PIN(STN8815_PIN_L22, "GPIO115_L22"),
PINCTRL_PIN(STN8815_PIN_G21, "GPIO116_G21"),
PINCTRL_PIN(STN8815_PIN_J20, "GPIO117_J20"),
PINCTRL_PIN(STN8815_PIN_G22, "GPIO118_G22"),
PINCTRL_PIN(STN8815_PIN_U19, "GPIO119_U19"),
PINCTRL_PIN(STN8815_PIN_G19, "GPIO120_G19"),
PINCTRL_PIN(STN8815_PIN_M22, "GPIO121_M22"),
PINCTRL_PIN(STN8815_PIN_M19, "GPIO122_M19"),
PINCTRL_PIN(STN8815_PIN_J22, "GPIO123_J22"),
};
/*
* Read the pin group names like this:
* u0_a_1 = first groups of pins for uart0 on alt function a
* i2c2_b_2 = second group of pins for i2c2 on alt function b
*/
/* Altfunction A */
static const unsigned u0txrx_a_1_pins[] = { STN8815_PIN_B4, STN8815_PIN_D5 };
static const unsigned u0ctsrts_a_1_pins[] = { STN8815_PIN_C5, STN8815_PIN_B6 };
/* Modem pins: DCD, DSR, RI, DTR */
static const unsigned u0modem_a_1_pins[] = { STN8815_PIN_A4, STN8815_PIN_B5,
STN8815_PIN_D6, STN8815_PIN_C6 };
static const unsigned mmcsd_a_1_pins[] = { STN8815_PIN_B10, STN8815_PIN_A10,
STN8815_PIN_C11, STN8815_PIN_B11, STN8815_PIN_A11, STN8815_PIN_C12,
STN8815_PIN_B12, STN8815_PIN_A12, STN8815_PIN_C13, STN8815_PIN_C15 };
static const unsigned mmcsd_b_1_pins[] = { STN8815_PIN_D15 };
static const unsigned u1_a_1_pins[] = { STN8815_PIN_M2, STN8815_PIN_L1,
STN8815_PIN_F3, STN8815_PIN_F2 };
static const unsigned i2c1_a_1_pins[] = { STN8815_PIN_L4, STN8815_PIN_L3 };
static const unsigned i2c0_a_1_pins[] = { STN8815_PIN_D3, STN8815_PIN_D2 };
/* Altfunction B */
static const unsigned u1_b_1_pins[] = { STN8815_PIN_B16, STN8815_PIN_A16 };
static const unsigned i2cusb_b_1_pins[] = { STN8815_PIN_C21, STN8815_PIN_C20 };
static const unsigned clcd_16_23_b_1_pins[] = { STN8815_PIN_AB6,
STN8815_PIN_AA6, STN8815_PIN_Y6, STN8815_PIN_Y5, STN8815_PIN_AA5,
STN8815_PIN_AB5, STN8815_PIN_AB4, STN8815_PIN_Y4 };
#define STN8815_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
static const struct nmk_pingroup nmk_stn8815_groups[] = {
STN8815_PIN_GROUP(u0txrx_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(u0ctsrts_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(u0modem_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(mmcsd_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(mmcsd_b_1, NMK_GPIO_ALT_B),
STN8815_PIN_GROUP(u1_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(i2c1_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A),
STN8815_PIN_GROUP(u1_b_1, NMK_GPIO_ALT_B),
STN8815_PIN_GROUP(i2cusb_b_1, NMK_GPIO_ALT_B),
STN8815_PIN_GROUP(clcd_16_23_b_1, NMK_GPIO_ALT_B),
};
/* We use this macro to define the groups applicable to a function */
#define STN8815_FUNC_GROUPS(a, b...) \
static const char * const a##_groups[] = { b };
STN8815_FUNC_GROUPS(u0, "u0txrx_a_1", "u0ctsrts_a_1", "u0modem_a_1");
STN8815_FUNC_GROUPS(mmcsd, "mmcsd_a_1", "mmcsd_b_1");
STN8815_FUNC_GROUPS(u1, "u1_a_1", "u1_b_1");
STN8815_FUNC_GROUPS(i2c1, "i2c1_a_1");
STN8815_FUNC_GROUPS(i2c0, "i2c0_a_1");
STN8815_FUNC_GROUPS(i2cusb, "i2cusb_b_1");
STN8815_FUNC_GROUPS(clcd, "clcd_16_23_b_1");
#define FUNCTION(fname) \
{ \
.name = #fname, \
.groups = fname##_groups, \
.ngroups = ARRAY_SIZE(fname##_groups), \
}
static const struct nmk_function nmk_stn8815_functions[] = {
FUNCTION(u0),
FUNCTION(mmcsd),
FUNCTION(u1),
FUNCTION(i2c1),
FUNCTION(i2c0),
FUNCTION(i2cusb),
FUNCTION(clcd),
};
static const struct nmk_pinctrl_soc_data nmk_stn8815_soc = {
.pins = nmk_stn8815_pins,
.npins = ARRAY_SIZE(nmk_stn8815_pins),
.functions = nmk_stn8815_functions,
.nfunctions = ARRAY_SIZE(nmk_stn8815_functions),
.groups = nmk_stn8815_groups,
.ngroups = ARRAY_SIZE(nmk_stn8815_groups),
};
void nmk_pinctrl_stn8815_init(const struct nmk_pinctrl_soc_data **soc)
{
*soc = &nmk_stn8815_soc;
}
Reference in New Issue View Git Blame Copy Permalink