linux/arch/x86/kernel/process.c
Linus Torvalds 2504ba8b01 Power management updates for 6.3-rc1
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
    Karny, Arnd Bergmann, Bagas Sanjaya).
 
  - Drop the custom cpufreq driver for loongson1 that is not necessary
    any more and the corresponding cpufreq platform device (Keguang
    Zhang).
 
  - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
    entries (Paul E. McKenney).
 
  - Enable thermal cooling for Tegra194 (Yi-Wei Wang).
 
  - Register module device table and add missing compatibles for
    cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
 
  - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
    (Christian Marangi).
 
  - Make kobj_type structure in the cpufreq core constant (Thomas
    Weißschuh).
 
  - Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
 
  - Make the TEO cpuidle governor check CPU utilization in order to refine
   idle state selection (Kajetan Puchalski).
 
  - Make Kconfig select the haltpoll cpuidle governor when the haltpoll
    cpuidle driver is selected and replace a default_idle() call in that
    driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
 
  - Add Emerald Rapids Xeon support to the intel_idle driver (Artem
    Bityutskiy).
 
  - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
    avoid randconfig build failures (Arnd Bergmann).
 
  - Make kobj_type structures used in the cpuidle sysfs interface
    constant (Thomas Weißschuh).
 
  - Make the cpuidle driver registration code update microsecond values
    of idle state parameters in accordance with their nanosecond values
    if they are provided (Rafael Wysocki).
 
  - Make the PSCI cpuidle driver prevent topology CPUs from being
    suspended on PREEMPT_RT (Krzysztof Kozlowski).
 
  - Document that pm_runtime_force_suspend() cannot be used with
    DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
 
  - Add EXPORT macros for exporting PM functions from drivers (Richard
    Fitzgerald).
 
  - Remove /** from non-kernel-doc comments in hibernation code (Randy
    Dunlap).
 
  - Fix possible name leak in powercap_register_zone() (Yang Yingliang).
 
  - Add Meteor Lake and Emerald Rapids support to the intel_rapl power
    capping driver (Zhang Rui).
 
  - Modify the idle_inject power capping facility to support 100% idle
    injection (Srinivas Pandruvada).
 
  - Fix large time windows handling in the intel_rapl power capping
    driver (Zhang Rui).
 
  - Fix memory leaks with using debugfs_lookup() in the generic PM
    domains and Energy Model code (Greg Kroah-Hartman).
 
  - Add missing 'cache-unified' property in the example for kryo OPP
    bindings (Rob Herring).
 
  - Fix error checking in opp_migrate_dentry() (Qi Zheng).
 
  - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
    Dybcio).
 
  - Modify some power management utilities to use the canonical ftrace
    path (Ross Zwisler).
 
  - Correct spelling problems for Documentation/power/ as reported by
    codespell (Randy Dunlap).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmPuJfMSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx/5kQAJNOVImLEPLerLP8xufw30//LuDU5Gi0
 STsyDOMql/I2MpkeqeCcgrSbpy6NlEglOvg16gfpQ3qqTCLF9ypENxs9E5BGGvW0
 aEdCzvaoqmvi9PCr/jmj0EPP70/U+rIX5m/k0QdjLh9x0aLoAEe3uRJTfR9QVqXf
 I7JX0N9kjKi7YxpA5DlkHrS7J7GPPiWlesJ3p4wXuHMo3jf+6fgkoPFt8yRrGWeh
 AHzGT2BLrsy7aAUjGZB65Qx9q3fnSXMmXOjmn0Xh2njQah+zRZDwrNzwoY2HTLL/
 KQ6/Ww16USYRZtCS1fmGwAj9I+ddq6AOvhPCMn0vLXXmKVAMUrVVWnQS/0+vpm9y
 suUMK9Tndkgxd1vjby2246ThJn27uDd/ERFan4ouQo2j22uICY+SDo3osj2hMXka
 wq4zthXkY8KgjZ+MuXnZxPhcOvo8KRvfxAU0fy5efQnSkbtwY9UlMvjPBMBHm/RA
 21/6kjQNtq5vMmI37oC8DH+oPrRQ7sUKuY7HNqwO9P3QNKWVmNe7cF5UtXXxME7Q
 ULvP1d+u+TNNdHFLryPwCSzBO34wQEccdRZBjalZ8tBe6JiDWUFHC3giSURZSuzZ
 GDvzVaNX6PkgToyv4inBTB8lTp6pAuUjaWNvNJzVvUXiEKHB0ihzg5vpJW5NdwlH
 15Tn8cjH7pp0
 =lZLx
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add EPP support to the AMD P-state cpufreq driver, add support
  for new platforms to the Intel RAPL power capping driver, intel_idle
  and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
  drop the custom cpufreq driver for loongson1 that is not necessary any
  more (and the corresponding cpufreq platform device), fix assorted
  issues and clean up code.

  Specifics:

   - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
     Karny, Arnd Bergmann, Bagas Sanjaya)

   - Drop the custom cpufreq driver for loongson1 that is not necessary
     any more and the corresponding cpufreq platform device (Keguang
     Zhang)

   - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
     entries (Paul E. McKenney)

   - Enable thermal cooling for Tegra194 (Yi-Wei Wang)

   - Register module device table and add missing compatibles for
     cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)

   - Various dt binding updates for qcom-cpufreq-nvmem and
     opp-v2-kryo-cpu (Christian Marangi)

   - Make kobj_type structure in the cpufreq core constant (Thomas
     Weißschuh)

   - Make cpufreq_unregister_driver() return void (Uwe Kleine-König)

   - Make the TEO cpuidle governor check CPU utilization in order to
     refine idle state selection (Kajetan Puchalski)

   - Make Kconfig select the haltpoll cpuidle governor when the haltpoll
     cpuidle driver is selected and replace a default_idle() call in
     that driver with arch_cpu_idle() to allow MWAIT to be used (Li
     RongQing)

   - Add Emerald Rapids Xeon support to the intel_idle driver (Artem
     Bityutskiy)

   - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
     avoid randconfig build failures (Arnd Bergmann)

   - Make kobj_type structures used in the cpuidle sysfs interface
     constant (Thomas Weißschuh)

   - Make the cpuidle driver registration code update microsecond values
     of idle state parameters in accordance with their nanosecond values
     if they are provided (Rafael Wysocki)

   - Make the PSCI cpuidle driver prevent topology CPUs from being
     suspended on PREEMPT_RT (Krzysztof Kozlowski)

   - Document that pm_runtime_force_suspend() cannot be used with
     DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)

   - Add EXPORT macros for exporting PM functions from drivers (Richard
     Fitzgerald)

   - Remove /** from non-kernel-doc comments in hibernation code (Randy
     Dunlap)

   - Fix possible name leak in powercap_register_zone() (Yang Yingliang)

   - Add Meteor Lake and Emerald Rapids support to the intel_rapl power
     capping driver (Zhang Rui)

   - Modify the idle_inject power capping facility to support 100% idle
     injection (Srinivas Pandruvada)

   - Fix large time windows handling in the intel_rapl power capping
     driver (Zhang Rui)

   - Fix memory leaks with using debugfs_lookup() in the generic PM
     domains and Energy Model code (Greg Kroah-Hartman)

   - Add missing 'cache-unified' property in the example for kryo OPP
     bindings (Rob Herring)

   - Fix error checking in opp_migrate_dentry() (Qi Zheng)

   - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
     Dybcio)

   - Modify some power management utilities to use the canonical ftrace
     path (Ross Zwisler)

   - Correct spelling problems for Documentation/power/ as reported by
     codespell (Randy Dunlap)"

* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: amd-pstate: disambiguate user space sections
  cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
  dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
  PM: Add EXPORT macros for exporting PM functions
  cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
  MIPS: loongson32: Drop obsolete cpufreq platform device
  powercap: intel_rapl: Fix handling for large time window
  cpuidle: driver: Update microsecond values of state parameters as needed
  cpuidle: sysfs: make kobj_type structures constant
  cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
  PM: EM: fix memory leak with using debugfs_lookup()
  PM: domains: fix memory leak with using debugfs_lookup()
  cpufreq: Make kobj_type structure constant
  cpufreq: davinci: Fix clk use after free
  cpufreq: amd-pstate: avoid uninitialized variable use
  cpufreq: Make cpufreq_unregister_driver() return void
  OPP: fix error checking in opp_migrate_dentry()
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
  ...
2023-02-21 12:13:58 -08:00

1023 lines
25 KiB
C

// SPDX-License-Identifier: GPL-2.0
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/prctl.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/sched/idle.h>
#include <linux/sched/debug.h>
#include <linux/sched/task.h>
#include <linux/sched/task_stack.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/pm.h>
#include <linux/tick.h>
#include <linux/random.h>
#include <linux/user-return-notifier.h>
#include <linux/dmi.h>
#include <linux/utsname.h>
#include <linux/stackprotector.h>
#include <linux/cpuidle.h>
#include <linux/acpi.h>
#include <linux/elf-randomize.h>
#include <linux/static_call.h>
#include <trace/events/power.h>
#include <linux/hw_breakpoint.h>
#include <asm/cpu.h>
#include <asm/apic.h>
#include <linux/uaccess.h>
#include <asm/mwait.h>
#include <asm/fpu/api.h>
#include <asm/fpu/sched.h>
#include <asm/fpu/xstate.h>
#include <asm/debugreg.h>
#include <asm/nmi.h>
#include <asm/tlbflush.h>
#include <asm/mce.h>
#include <asm/vm86.h>
#include <asm/switch_to.h>
#include <asm/desc.h>
#include <asm/prctl.h>
#include <asm/spec-ctrl.h>
#include <asm/io_bitmap.h>
#include <asm/proto.h>
#include <asm/frame.h>
#include <asm/unwind.h>
#include <asm/tdx.h>
#include "process.h"
/*
* per-CPU TSS segments. Threads are completely 'soft' on Linux,
* no more per-task TSS's. The TSS size is kept cacheline-aligned
* so they are allowed to end up in the .data..cacheline_aligned
* section. Since TSS's are completely CPU-local, we want them
* on exact cacheline boundaries, to eliminate cacheline ping-pong.
*/
__visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = {
.x86_tss = {
/*
* .sp0 is only used when entering ring 0 from a lower
* privilege level. Since the init task never runs anything
* but ring 0 code, there is no need for a valid value here.
* Poison it.
*/
.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,
#ifdef CONFIG_X86_32
.sp1 = TOP_OF_INIT_STACK,
.ss0 = __KERNEL_DS,
.ss1 = __KERNEL_CS,
#endif
.io_bitmap_base = IO_BITMAP_OFFSET_INVALID,
},
};
EXPORT_PER_CPU_SYMBOL(cpu_tss_rw);
DEFINE_PER_CPU(bool, __tss_limit_invalid);
EXPORT_PER_CPU_SYMBOL_GPL(__tss_limit_invalid);
/*
* this gets called so that we can store lazy state into memory and copy the
* current task into the new thread.
*/
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
memcpy(dst, src, arch_task_struct_size);
#ifdef CONFIG_VM86
dst->thread.vm86 = NULL;
#endif
/* Drop the copied pointer to current's fpstate */
dst->thread.fpu.fpstate = NULL;
return 0;
}
#ifdef CONFIG_X86_64
void arch_release_task_struct(struct task_struct *tsk)
{
if (fpu_state_size_dynamic())
fpstate_free(&tsk->thread.fpu);
}
#endif
/*
* Free thread data structures etc..
*/
void exit_thread(struct task_struct *tsk)
{
struct thread_struct *t = &tsk->thread;
struct fpu *fpu = &t->fpu;
if (test_thread_flag(TIF_IO_BITMAP))
io_bitmap_exit(tsk);
free_vm86(t);
fpu__drop(fpu);
}
static int set_new_tls(struct task_struct *p, unsigned long tls)
{
struct user_desc __user *utls = (struct user_desc __user *)tls;
if (in_ia32_syscall())
return do_set_thread_area(p, -1, utls, 0);
else
return do_set_thread_area_64(p, ARCH_SET_FS, tls);
}
int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
{
unsigned long clone_flags = args->flags;
unsigned long sp = args->stack;
unsigned long tls = args->tls;
struct inactive_task_frame *frame;
struct fork_frame *fork_frame;
struct pt_regs *childregs;
int ret = 0;
childregs = task_pt_regs(p);
fork_frame = container_of(childregs, struct fork_frame, regs);
frame = &fork_frame->frame;
frame->bp = encode_frame_pointer(childregs);
frame->ret_addr = (unsigned long) ret_from_fork;
p->thread.sp = (unsigned long) fork_frame;
p->thread.io_bitmap = NULL;
p->thread.iopl_warn = 0;
memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
#ifdef CONFIG_X86_64
current_save_fsgs();
p->thread.fsindex = current->thread.fsindex;
p->thread.fsbase = current->thread.fsbase;
p->thread.gsindex = current->thread.gsindex;
p->thread.gsbase = current->thread.gsbase;
savesegment(es, p->thread.es);
savesegment(ds, p->thread.ds);
#else
p->thread.sp0 = (unsigned long) (childregs + 1);
savesegment(gs, p->thread.gs);
/*
* Clear all status flags including IF and set fixed bit. 64bit
* does not have this initialization as the frame does not contain
* flags. The flags consistency (especially vs. AC) is there
* ensured via objtool, which lacks 32bit support.
*/
frame->flags = X86_EFLAGS_FIXED;
#endif
fpu_clone(p, clone_flags, args->fn);
/* Kernel thread ? */
if (unlikely(p->flags & PF_KTHREAD)) {
p->thread.pkru = pkru_get_init_value();
memset(childregs, 0, sizeof(struct pt_regs));
kthread_frame_init(frame, args->fn, args->fn_arg);
return 0;
}
/*
* Clone current's PKRU value from hardware. tsk->thread.pkru
* is only valid when scheduled out.
*/
p->thread.pkru = read_pkru();
frame->bx = 0;
*childregs = *current_pt_regs();
childregs->ax = 0;
if (sp)
childregs->sp = sp;
if (unlikely(args->fn)) {
/*
* A user space thread, but it doesn't return to
* ret_after_fork().
*
* In order to indicate that to tools like gdb,
* we reset the stack and instruction pointers.
*
* It does the same kernel frame setup to return to a kernel
* function that a kernel thread does.
*/
childregs->sp = 0;
childregs->ip = 0;
kthread_frame_init(frame, args->fn, args->fn_arg);
return 0;
}
/* Set a new TLS for the child thread? */
if (clone_flags & CLONE_SETTLS)
ret = set_new_tls(p, tls);
if (!ret && unlikely(test_tsk_thread_flag(current, TIF_IO_BITMAP)))
io_bitmap_share(p);
return ret;
}
static void pkru_flush_thread(void)
{
/*
* If PKRU is enabled the default PKRU value has to be loaded into
* the hardware right here (similar to context switch).
*/
pkru_write_default();
}
void flush_thread(void)
{
struct task_struct *tsk = current;
flush_ptrace_hw_breakpoint(tsk);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
fpu_flush_thread();
pkru_flush_thread();
}
void disable_TSC(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
cr4_set_bits(X86_CR4_TSD);
preempt_enable();
}
static void enable_TSC(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
cr4_clear_bits(X86_CR4_TSD);
preempt_enable();
}
int get_tsc_mode(unsigned long adr)
{
unsigned int val;
if (test_thread_flag(TIF_NOTSC))
val = PR_TSC_SIGSEGV;
else
val = PR_TSC_ENABLE;
return put_user(val, (unsigned int __user *)adr);
}
int set_tsc_mode(unsigned int val)
{
if (val == PR_TSC_SIGSEGV)
disable_TSC();
else if (val == PR_TSC_ENABLE)
enable_TSC();
else
return -EINVAL;
return 0;
}
DEFINE_PER_CPU(u64, msr_misc_features_shadow);
static void set_cpuid_faulting(bool on)
{
u64 msrval;
msrval = this_cpu_read(msr_misc_features_shadow);
msrval &= ~MSR_MISC_FEATURES_ENABLES_CPUID_FAULT;
msrval |= (on << MSR_MISC_FEATURES_ENABLES_CPUID_FAULT_BIT);
this_cpu_write(msr_misc_features_shadow, msrval);
wrmsrl(MSR_MISC_FEATURES_ENABLES, msrval);
}
static void disable_cpuid(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOCPUID)) {
/*
* Must flip the CPU state synchronously with
* TIF_NOCPUID in the current running context.
*/
set_cpuid_faulting(true);
}
preempt_enable();
}
static void enable_cpuid(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOCPUID)) {
/*
* Must flip the CPU state synchronously with
* TIF_NOCPUID in the current running context.
*/
set_cpuid_faulting(false);
}
preempt_enable();
}
static int get_cpuid_mode(void)
{
return !test_thread_flag(TIF_NOCPUID);
}
static int set_cpuid_mode(unsigned long cpuid_enabled)
{
if (!boot_cpu_has(X86_FEATURE_CPUID_FAULT))
return -ENODEV;
if (cpuid_enabled)
enable_cpuid();
else
disable_cpuid();
return 0;
}
/*
* Called immediately after a successful exec.
*/
void arch_setup_new_exec(void)
{
/* If cpuid was previously disabled for this task, re-enable it. */
if (test_thread_flag(TIF_NOCPUID))
enable_cpuid();
/*
* Don't inherit TIF_SSBD across exec boundary when
* PR_SPEC_DISABLE_NOEXEC is used.
*/
if (test_thread_flag(TIF_SSBD) &&
task_spec_ssb_noexec(current)) {
clear_thread_flag(TIF_SSBD);
task_clear_spec_ssb_disable(current);
task_clear_spec_ssb_noexec(current);
speculation_ctrl_update(read_thread_flags());
}
}
#ifdef CONFIG_X86_IOPL_IOPERM
static inline void switch_to_bitmap(unsigned long tifp)
{
/*
* Invalidate I/O bitmap if the previous task used it. This prevents
* any possible leakage of an active I/O bitmap.
*
* If the next task has an I/O bitmap it will handle it on exit to
* user mode.
*/
if (tifp & _TIF_IO_BITMAP)
tss_invalidate_io_bitmap();
}
static void tss_copy_io_bitmap(struct tss_struct *tss, struct io_bitmap *iobm)
{
/*
* Copy at least the byte range of the incoming tasks bitmap which
* covers the permitted I/O ports.
*
* If the previous task which used an I/O bitmap had more bits
* permitted, then the copy needs to cover those as well so they
* get turned off.
*/
memcpy(tss->io_bitmap.bitmap, iobm->bitmap,
max(tss->io_bitmap.prev_max, iobm->max));
/*
* Store the new max and the sequence number of this bitmap
* and a pointer to the bitmap itself.
*/
tss->io_bitmap.prev_max = iobm->max;
tss->io_bitmap.prev_sequence = iobm->sequence;
}
/**
* native_tss_update_io_bitmap - Update I/O bitmap before exiting to user mode
*/
void native_tss_update_io_bitmap(void)
{
struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw);
struct thread_struct *t = &current->thread;
u16 *base = &tss->x86_tss.io_bitmap_base;
if (!test_thread_flag(TIF_IO_BITMAP)) {
native_tss_invalidate_io_bitmap();
return;
}
if (IS_ENABLED(CONFIG_X86_IOPL_IOPERM) && t->iopl_emul == 3) {
*base = IO_BITMAP_OFFSET_VALID_ALL;
} else {
struct io_bitmap *iobm = t->io_bitmap;
/*
* Only copy bitmap data when the sequence number differs. The
* update time is accounted to the incoming task.
*/
if (tss->io_bitmap.prev_sequence != iobm->sequence)
tss_copy_io_bitmap(tss, iobm);
/* Enable the bitmap */
*base = IO_BITMAP_OFFSET_VALID_MAP;
}
/*
* Make sure that the TSS limit is covering the IO bitmap. It might have
* been cut down by a VMEXIT to 0x67 which would cause a subsequent I/O
* access from user space to trigger a #GP because tbe bitmap is outside
* the TSS limit.
*/
refresh_tss_limit();
}
#else /* CONFIG_X86_IOPL_IOPERM */
static inline void switch_to_bitmap(unsigned long tifp) { }
#endif
#ifdef CONFIG_SMP
struct ssb_state {
struct ssb_state *shared_state;
raw_spinlock_t lock;
unsigned int disable_state;
unsigned long local_state;
};
#define LSTATE_SSB 0
static DEFINE_PER_CPU(struct ssb_state, ssb_state);
void speculative_store_bypass_ht_init(void)
{
struct ssb_state *st = this_cpu_ptr(&ssb_state);
unsigned int this_cpu = smp_processor_id();
unsigned int cpu;
st->local_state = 0;
/*
* Shared state setup happens once on the first bringup
* of the CPU. It's not destroyed on CPU hotunplug.
*/
if (st->shared_state)
return;
raw_spin_lock_init(&st->lock);
/*
* Go over HT siblings and check whether one of them has set up the
* shared state pointer already.
*/
for_each_cpu(cpu, topology_sibling_cpumask(this_cpu)) {
if (cpu == this_cpu)
continue;
if (!per_cpu(ssb_state, cpu).shared_state)
continue;
/* Link it to the state of the sibling: */
st->shared_state = per_cpu(ssb_state, cpu).shared_state;
return;
}
/*
* First HT sibling to come up on the core. Link shared state of
* the first HT sibling to itself. The siblings on the same core
* which come up later will see the shared state pointer and link
* themselves to the state of this CPU.
*/
st->shared_state = st;
}
/*
* Logic is: First HT sibling enables SSBD for both siblings in the core
* and last sibling to disable it, disables it for the whole core. This how
* MSR_SPEC_CTRL works in "hardware":
*
* CORE_SPEC_CTRL = THREAD0_SPEC_CTRL | THREAD1_SPEC_CTRL
*/
static __always_inline void amd_set_core_ssb_state(unsigned long tifn)
{
struct ssb_state *st = this_cpu_ptr(&ssb_state);
u64 msr = x86_amd_ls_cfg_base;
if (!static_cpu_has(X86_FEATURE_ZEN)) {
msr |= ssbd_tif_to_amd_ls_cfg(tifn);
wrmsrl(MSR_AMD64_LS_CFG, msr);
return;
}
if (tifn & _TIF_SSBD) {
/*
* Since this can race with prctl(), block reentry on the
* same CPU.
*/
if (__test_and_set_bit(LSTATE_SSB, &st->local_state))
return;
msr |= x86_amd_ls_cfg_ssbd_mask;
raw_spin_lock(&st->shared_state->lock);
/* First sibling enables SSBD: */
if (!st->shared_state->disable_state)
wrmsrl(MSR_AMD64_LS_CFG, msr);
st->shared_state->disable_state++;
raw_spin_unlock(&st->shared_state->lock);
} else {
if (!__test_and_clear_bit(LSTATE_SSB, &st->local_state))
return;
raw_spin_lock(&st->shared_state->lock);
st->shared_state->disable_state--;
if (!st->shared_state->disable_state)
wrmsrl(MSR_AMD64_LS_CFG, msr);
raw_spin_unlock(&st->shared_state->lock);
}
}
#else
static __always_inline void amd_set_core_ssb_state(unsigned long tifn)
{
u64 msr = x86_amd_ls_cfg_base | ssbd_tif_to_amd_ls_cfg(tifn);
wrmsrl(MSR_AMD64_LS_CFG, msr);
}
#endif
static __always_inline void amd_set_ssb_virt_state(unsigned long tifn)
{
/*
* SSBD has the same definition in SPEC_CTRL and VIRT_SPEC_CTRL,
* so ssbd_tif_to_spec_ctrl() just works.
*/
wrmsrl(MSR_AMD64_VIRT_SPEC_CTRL, ssbd_tif_to_spec_ctrl(tifn));
}
/*
* Update the MSRs managing speculation control, during context switch.
*
* tifp: Previous task's thread flags
* tifn: Next task's thread flags
*/
static __always_inline void __speculation_ctrl_update(unsigned long tifp,
unsigned long tifn)
{
unsigned long tif_diff = tifp ^ tifn;
u64 msr = x86_spec_ctrl_base;
bool updmsr = false;
lockdep_assert_irqs_disabled();
/* Handle change of TIF_SSBD depending on the mitigation method. */
if (static_cpu_has(X86_FEATURE_VIRT_SSBD)) {
if (tif_diff & _TIF_SSBD)
amd_set_ssb_virt_state(tifn);
} else if (static_cpu_has(X86_FEATURE_LS_CFG_SSBD)) {
if (tif_diff & _TIF_SSBD)
amd_set_core_ssb_state(tifn);
} else if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
static_cpu_has(X86_FEATURE_AMD_SSBD)) {
updmsr |= !!(tif_diff & _TIF_SSBD);
msr |= ssbd_tif_to_spec_ctrl(tifn);
}
/* Only evaluate TIF_SPEC_IB if conditional STIBP is enabled. */
if (IS_ENABLED(CONFIG_SMP) &&
static_branch_unlikely(&switch_to_cond_stibp)) {
updmsr |= !!(tif_diff & _TIF_SPEC_IB);
msr |= stibp_tif_to_spec_ctrl(tifn);
}
if (updmsr)
update_spec_ctrl_cond(msr);
}
static unsigned long speculation_ctrl_update_tif(struct task_struct *tsk)
{
if (test_and_clear_tsk_thread_flag(tsk, TIF_SPEC_FORCE_UPDATE)) {
if (task_spec_ssb_disable(tsk))
set_tsk_thread_flag(tsk, TIF_SSBD);
else
clear_tsk_thread_flag(tsk, TIF_SSBD);
if (task_spec_ib_disable(tsk))
set_tsk_thread_flag(tsk, TIF_SPEC_IB);
else
clear_tsk_thread_flag(tsk, TIF_SPEC_IB);
}
/* Return the updated threadinfo flags*/
return read_task_thread_flags(tsk);
}
void speculation_ctrl_update(unsigned long tif)
{
unsigned long flags;
/* Forced update. Make sure all relevant TIF flags are different */
local_irq_save(flags);
__speculation_ctrl_update(~tif, tif);
local_irq_restore(flags);
}
/* Called from seccomp/prctl update */
void speculation_ctrl_update_current(void)
{
preempt_disable();
speculation_ctrl_update(speculation_ctrl_update_tif(current));
preempt_enable();
}
static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
{
unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
newval = cr4 ^ mask;
if (newval != cr4) {
this_cpu_write(cpu_tlbstate.cr4, newval);
__write_cr4(newval);
}
}
void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
{
unsigned long tifp, tifn;
tifn = read_task_thread_flags(next_p);
tifp = read_task_thread_flags(prev_p);
switch_to_bitmap(tifp);
propagate_user_return_notify(prev_p, next_p);
if ((tifp & _TIF_BLOCKSTEP || tifn & _TIF_BLOCKSTEP) &&
arch_has_block_step()) {
unsigned long debugctl, msk;
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
debugctl &= ~DEBUGCTLMSR_BTF;
msk = tifn & _TIF_BLOCKSTEP;
debugctl |= (msk >> TIF_BLOCKSTEP) << DEBUGCTLMSR_BTF_SHIFT;
wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
}
if ((tifp ^ tifn) & _TIF_NOTSC)
cr4_toggle_bits_irqsoff(X86_CR4_TSD);
if ((tifp ^ tifn) & _TIF_NOCPUID)
set_cpuid_faulting(!!(tifn & _TIF_NOCPUID));
if (likely(!((tifp | tifn) & _TIF_SPEC_FORCE_UPDATE))) {
__speculation_ctrl_update(tifp, tifn);
} else {
speculation_ctrl_update_tif(prev_p);
tifn = speculation_ctrl_update_tif(next_p);
/* Enforce MSR update to ensure consistent state */
__speculation_ctrl_update(~tifn, tifn);
}
}
/*
* Idle related variables and functions
*/
unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
EXPORT_SYMBOL(boot_option_idle_override);
/*
* We use this if we don't have any better idle routine..
*/
void __cpuidle default_idle(void)
{
raw_safe_halt();
raw_local_irq_disable();
}
#if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE)
EXPORT_SYMBOL(default_idle);
#endif
DEFINE_STATIC_CALL_NULL(x86_idle, default_idle);
static bool x86_idle_set(void)
{
return !!static_call_query(x86_idle);
}
#ifndef CONFIG_SMP
static inline void play_dead(void)
{
BUG();
}
#endif
void arch_cpu_idle_enter(void)
{
tsc_verify_tsc_adjust(false);
local_touch_nmi();
}
void arch_cpu_idle_dead(void)
{
play_dead();
}
/*
* Called from the generic idle code.
*/
void __cpuidle arch_cpu_idle(void)
{
static_call(x86_idle)();
}
EXPORT_SYMBOL_GPL(arch_cpu_idle);
#ifdef CONFIG_XEN
bool xen_set_default_idle(void)
{
bool ret = x86_idle_set();
static_call_update(x86_idle, default_idle);
return ret;
}
#endif
void __noreturn stop_this_cpu(void *dummy)
{
local_irq_disable();
/*
* Remove this CPU:
*/
set_cpu_online(smp_processor_id(), false);
disable_local_APIC();
mcheck_cpu_clear(this_cpu_ptr(&cpu_info));
/*
* Use wbinvd on processors that support SME. This provides support
* for performing a successful kexec when going from SME inactive
* to SME active (or vice-versa). The cache must be cleared so that
* if there are entries with the same physical address, both with and
* without the encryption bit, they don't race each other when flushed
* and potentially end up with the wrong entry being committed to
* memory.
*
* Test the CPUID bit directly because the machine might've cleared
* X86_FEATURE_SME due to cmdline options.
*/
if (cpuid_eax(0x8000001f) & BIT(0))
native_wbinvd();
for (;;) {
/*
* Use native_halt() so that memory contents don't change
* (stack usage and variables) after possibly issuing the
* native_wbinvd() above.
*/
native_halt();
}
}
/*
* AMD Erratum 400 aware idle routine. We handle it the same way as C3 power
* states (local apic timer and TSC stop).
*
* XXX this function is completely buggered vs RCU and tracing.
*/
static void amd_e400_idle(void)
{
/*
* We cannot use static_cpu_has_bug() here because X86_BUG_AMD_APIC_C1E
* gets set after static_cpu_has() places have been converted via
* alternatives.
*/
if (!boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
default_idle();
return;
}
tick_broadcast_enter();
default_idle();
tick_broadcast_exit();
}
/*
* Prefer MWAIT over HALT if MWAIT is supported, MWAIT_CPUID leaf
* exists and whenever MONITOR/MWAIT extensions are present there is at
* least one C1 substate.
*
* Do not prefer MWAIT if MONITOR instruction has a bug or idle=nomwait
* is passed to kernel commandline parameter.
*/
static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
/* User has disallowed the use of MWAIT. Fallback to HALT */
if (boot_option_idle_override == IDLE_NOMWAIT)
return 0;
/* MWAIT is not supported on this platform. Fallback to HALT */
if (!cpu_has(c, X86_FEATURE_MWAIT))
return 0;
/* Monitor has a bug. Fallback to HALT */
if (boot_cpu_has_bug(X86_BUG_MONITOR))
return 0;
cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
/*
* If MWAIT extensions are not available, it is safe to use MWAIT
* with EAX=0, ECX=0.
*/
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED))
return 1;
/*
* If MWAIT extensions are available, there should be at least one
* MWAIT C1 substate present.
*/
return (edx & MWAIT_C1_SUBSTATE_MASK);
}
/*
* MONITOR/MWAIT with no hints, used for default C1 state. This invokes MWAIT
* with interrupts enabled and no flags, which is backwards compatible with the
* original MWAIT implementation.
*/
static __cpuidle void mwait_idle(void)
{
if (!current_set_polling_and_test()) {
if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
mb(); /* quirk */
clflush((void *)&current_thread_info()->flags);
mb(); /* quirk */
}
__monitor((void *)&current_thread_info()->flags, 0, 0);
if (!need_resched()) {
__sti_mwait(0, 0);
raw_local_irq_disable();
}
}
__current_clr_polling();
}
void select_idle_routine(const struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
if (boot_option_idle_override == IDLE_POLL && smp_num_siblings > 1)
pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
#endif
if (x86_idle_set() || boot_option_idle_override == IDLE_POLL)
return;
if (boot_cpu_has_bug(X86_BUG_AMD_E400)) {
pr_info("using AMD E400 aware idle routine\n");
static_call_update(x86_idle, amd_e400_idle);
} else if (prefer_mwait_c1_over_halt(c)) {
pr_info("using mwait in idle threads\n");
static_call_update(x86_idle, mwait_idle);
} else if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {
pr_info("using TDX aware idle routine\n");
static_call_update(x86_idle, tdx_safe_halt);
} else
static_call_update(x86_idle, default_idle);
}
void amd_e400_c1e_apic_setup(void)
{
if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
pr_info("Switch to broadcast mode on CPU%d\n", smp_processor_id());
local_irq_disable();
tick_broadcast_force();
local_irq_enable();
}
}
void __init arch_post_acpi_subsys_init(void)
{
u32 lo, hi;
if (!boot_cpu_has_bug(X86_BUG_AMD_E400))
return;
/*
* AMD E400 detection needs to happen after ACPI has been enabled. If
* the machine is affected K8_INTP_C1E_ACTIVE_MASK bits are set in
* MSR_K8_INT_PENDING_MSG.
*/
rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
if (!(lo & K8_INTP_C1E_ACTIVE_MASK))
return;
boot_cpu_set_bug(X86_BUG_AMD_APIC_C1E);
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halt in AMD C1E");
pr_info("System has AMD C1E enabled\n");
}
static int __init idle_setup(char *str)
{
if (!str)
return -EINVAL;
if (!strcmp(str, "poll")) {
pr_info("using polling idle threads\n");
boot_option_idle_override = IDLE_POLL;
cpu_idle_poll_ctrl(true);
} else if (!strcmp(str, "halt")) {
/*
* When the boot option of idle=halt is added, halt is
* forced to be used for CPU idle. In such case CPU C2/C3
* won't be used again.
* To continue to load the CPU idle driver, don't touch
* the boot_option_idle_override.
*/
static_call_update(x86_idle, default_idle);
boot_option_idle_override = IDLE_HALT;
} else if (!strcmp(str, "nomwait")) {
/*
* If the boot option of "idle=nomwait" is added,
* it means that mwait will be disabled for CPU C1/C2/C3
* states.
*/
boot_option_idle_override = IDLE_NOMWAIT;
} else
return -1;
return 0;
}
early_param("idle", idle_setup);
unsigned long arch_align_stack(unsigned long sp)
{
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
sp -= get_random_u32_below(8192);
return sp & ~0xf;
}
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
return randomize_page(mm->brk, 0x02000000);
}
/*
* Called from fs/proc with a reference on @p to find the function
* which called into schedule(). This needs to be done carefully
* because the task might wake up and we might look at a stack
* changing under us.
*/
unsigned long __get_wchan(struct task_struct *p)
{
struct unwind_state state;
unsigned long addr = 0;
if (!try_get_task_stack(p))
return 0;
for (unwind_start(&state, p, NULL, NULL); !unwind_done(&state);
unwind_next_frame(&state)) {
addr = unwind_get_return_address(&state);
if (!addr)
break;
if (in_sched_functions(addr))
continue;
break;
}
put_task_stack(p);
return addr;
}
long do_arch_prctl_common(int option, unsigned long arg2)
{
switch (option) {
case ARCH_GET_CPUID:
return get_cpuid_mode();
case ARCH_SET_CPUID:
return set_cpuid_mode(arg2);
case ARCH_GET_XCOMP_SUPP:
case ARCH_GET_XCOMP_PERM:
case ARCH_REQ_XCOMP_PERM:
case ARCH_GET_XCOMP_GUEST_PERM:
case ARCH_REQ_XCOMP_GUEST_PERM:
return fpu_xstate_prctl(option, arg2);
}
return -EINVAL;
}