korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-09-21 20:22:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
8d2b2281ae
linux/drivers/regulator/da9055-regulator.c
Douglas Anderson 259b93b21a
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 
Probing of regulators can be a slow operation and can contribute to
slower boot times. This is especially true if a regulator is turned on
at probe time (with regulator-boot-on or regulator-always-on) and the
regulator requires delays (off-on-time, ramp time, etc).

While the overall kernel is not ready to switch to async probe by
default, as per the discussion on the mailing lists [1] it is believed
that the regulator subsystem is in good shape and we can move
regulator drivers over wholesale. There is no way to just magically
opt in all regulators (regulators are just normal drivers like
platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all
regulators found in 'drivers/regulator' individually.

Given the number of drivers touched and the impossibility to test this
ahead of time, it wouldn't be shocking at all if this caused a
regression for someone. If there is a regression caused by this patch,
it's likely to be one of the cases talked about in [1]. As a "quick
fix", drivers involved in the regression could be fixed by changing
them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix
would be to directly fix the problem that caused the issue with async
probe.

The approach here follows a similar approach that was used for the mmc
subsystem several years ago [2]. In fact, I ran nearly the same python
script to auto-generate the changes. The only thing I changed was to
search for "i2c_driver", "spmi_driver", and "spi_driver" in addition
to "platform_driver".

[1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk
[2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-20 13:11:25 +00:00

599 lines
15 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
//
// Regulator driver for DA9055 PMIC
//
// Copyright(c) 2012 Dialog Semiconductor Ltd.
//
// Author: David Dajun Chen <dchen@diasemi.com>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/da9055/core.h>
#include <linux/mfd/da9055/reg.h>
#include <linux/mfd/da9055/pdata.h>
#define DA9055_MIN_UA 0
#define DA9055_MAX_UA 3
#define DA9055_LDO_MODE_SYNC 0
#define DA9055_LDO_MODE_SLEEP 1
#define DA9055_BUCK_MODE_SLEEP 1
#define DA9055_BUCK_MODE_SYNC 2
#define DA9055_BUCK_MODE_AUTO 3
/* DA9055 REGULATOR IDs */
#define DA9055_ID_BUCK1 0
#define DA9055_ID_BUCK2 1
#define DA9055_ID_LDO1 2
#define DA9055_ID_LDO2 3
#define DA9055_ID_LDO3 4
#define DA9055_ID_LDO4 5
#define DA9055_ID_LDO5 6
#define DA9055_ID_LDO6 7
/* DA9055 BUCK current limit */
static const unsigned int da9055_current_limits[] = {
500000, 600000, 700000, 800000
};
struct da9055_conf_reg {
int reg;
int sel_mask;
int en_mask;
};
struct da9055_volt_reg {
int reg_a;
int reg_b;
int sl_shift;
int v_mask;
};
struct da9055_mode_reg {
int reg;
int mask;
int shift;
};
struct da9055_regulator_info {
struct regulator_desc reg_desc;
struct da9055_conf_reg conf;
struct da9055_volt_reg volt;
struct da9055_mode_reg mode;
};
struct da9055_regulator {
struct da9055 *da9055;
struct da9055_regulator_info *info;
struct regulator_dev *rdev;
enum gpio_select reg_rselect;
};
static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int ret, mode = 0;
ret = da9055_reg_read(regulator->da9055, info->mode.reg);
if (ret < 0)
return ret;
switch ((ret & info->mode.mask) >> info->mode.shift) {
case DA9055_BUCK_MODE_SYNC:
mode = REGULATOR_MODE_FAST;
break;
case DA9055_BUCK_MODE_AUTO:
mode = REGULATOR_MODE_NORMAL;
break;
case DA9055_BUCK_MODE_SLEEP:
mode = REGULATOR_MODE_STANDBY;
break;
}
return mode;
}
static int da9055_buck_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int val = 0;
switch (mode) {
case REGULATOR_MODE_FAST:
val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
break;
case REGULATOR_MODE_NORMAL:
val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
break;
case REGULATOR_MODE_STANDBY:
val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
break;
}
return da9055_reg_update(regulator->da9055, info->mode.reg,
info->mode.mask, val);
}
static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int ret;
ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
if (ret < 0)
return ret;
if (ret >> info->volt.sl_shift)
return REGULATOR_MODE_STANDBY;
else
return REGULATOR_MODE_NORMAL;
}
static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
struct da9055_volt_reg volt = info->volt;
int val = 0;
switch (mode) {
case REGULATOR_MODE_NORMAL:
case REGULATOR_MODE_FAST:
val = DA9055_LDO_MODE_SYNC;
break;
case REGULATOR_MODE_STANDBY:
val = DA9055_LDO_MODE_SLEEP;
break;
}
return da9055_reg_update(regulator->da9055, volt.reg_b,
1 << volt.sl_shift,
val << volt.sl_shift);
}
static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
struct da9055_volt_reg volt = info->volt;
int ret, sel;
/*
* There are two voltage register set A & B for voltage ramping but
* either one of then can be active therefore we first determine
* the active register set.
*/
ret = da9055_reg_read(regulator->da9055, info->conf.reg);
if (ret < 0)
return ret;
ret &= info->conf.sel_mask;
/* Get the voltage for the active register set A/B */
if (ret == DA9055_REGUALTOR_SET_A)
ret = da9055_reg_read(regulator->da9055, volt.reg_a);
else
ret = da9055_reg_read(regulator->da9055, volt.reg_b);
if (ret < 0)
return ret;
sel = (ret & volt.v_mask);
return sel;
}
static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int ret;
/*
* Regulator register set A/B is not selected through GPIO therefore
* we use default register set A for voltage ramping.
*/
if (regulator->reg_rselect == NO_GPIO) {
/* Select register set A */
ret = da9055_reg_update(regulator->da9055, info->conf.reg,
info->conf.sel_mask, DA9055_SEL_REG_A);
if (ret < 0)
return ret;
/* Set the voltage */
return da9055_reg_update(regulator->da9055, info->volt.reg_a,
info->volt.v_mask, selector);
}
/*
* Here regulator register set A/B is selected through GPIO.
* Therefore we first determine the selected register set A/B and
* then set the desired voltage for that register set A/B.
*/
ret = da9055_reg_read(regulator->da9055, info->conf.reg);
if (ret < 0)
return ret;
ret &= info->conf.sel_mask;
/* Set the voltage */
if (ret == DA9055_REGUALTOR_SET_A)
return da9055_reg_update(regulator->da9055, info->volt.reg_a,
info->volt.v_mask, selector);
else
return da9055_reg_update(regulator->da9055, info->volt.reg_b,
info->volt.v_mask, selector);
}
static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
int ret;
/* Select register set B for suspend voltage ramping. */
if (regulator->reg_rselect == NO_GPIO) {
ret = da9055_reg_update(regulator->da9055, info->conf.reg,
info->conf.sel_mask, DA9055_SEL_REG_B);
if (ret < 0)
return ret;
}
ret = regulator_map_voltage_linear(rdev, uV, uV);
if (ret < 0)
return ret;
return da9055_reg_update(regulator->da9055, info->volt.reg_b,
info->volt.v_mask, ret);
}
static int da9055_suspend_enable(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
/* Select register set B for voltage ramping. */
if (regulator->reg_rselect == NO_GPIO)
return da9055_reg_update(regulator->da9055, info->conf.reg,
info->conf.sel_mask, DA9055_SEL_REG_B);
else
return 0;
}
static int da9055_suspend_disable(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
struct da9055_regulator_info *info = regulator->info;
/* Diselect register set B. */
if (regulator->reg_rselect == NO_GPIO)
return da9055_reg_update(regulator->da9055, info->conf.reg,
info->conf.sel_mask, DA9055_SEL_REG_A);
else
return 0;
}
static const struct regulator_ops da9055_buck_ops = {
.get_mode = da9055_buck_get_mode,
.set_mode = da9055_buck_set_mode,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
.get_voltage_sel = da9055_regulator_get_voltage_sel,
.set_voltage_sel = da9055_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
.set_suspend_enable = da9055_suspend_enable,
.set_suspend_disable = da9055_suspend_disable,
.set_suspend_mode = da9055_buck_set_mode,
};
static const struct regulator_ops da9055_ldo_ops = {
.get_mode = da9055_ldo_get_mode,
.set_mode = da9055_ldo_set_mode,
.get_voltage_sel = da9055_regulator_get_voltage_sel,
.set_voltage_sel = da9055_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
.set_suspend_enable = da9055_suspend_enable,
.set_suspend_disable = da9055_suspend_disable,
.set_suspend_mode = da9055_ldo_set_mode,
};
#define DA9055_LDO(_id, step, min, max, vbits, voffset) \
{\
.reg_desc = {\
.name = #_id,\
.of_match = of_match_ptr(#_id),\
.regulators_node = of_match_ptr("regulators"),\
.ops = &da9055_ldo_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9055_ID_##_id,\
.n_voltages = (max - min) / step + 1 + (voffset), \
.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
.enable_mask = 1, \
.min_uV = (min) * 1000,\
.uV_step = (step) * 1000,\
.linear_min_sel = (voffset),\
.owner = THIS_MODULE,\
},\
.conf = {\
.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
.sel_mask = (1 << 4),\
.en_mask = 1,\
},\
.volt = {\
.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
.sl_shift = 7,\
.v_mask = (1 << (vbits)) - 1,\
},\
}
#define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
{\
.reg_desc = {\
.name = #_id,\
.of_match = of_match_ptr(#_id),\
.regulators_node = of_match_ptr("regulators"),\
.ops = &da9055_buck_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9055_ID_##_id,\
.n_voltages = (max - min) / step + 1 + (voffset), \
.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
.enable_mask = 1,\
.min_uV = (min) * 1000,\
.uV_step = (step) * 1000,\
.linear_min_sel = (voffset),\
.owner = THIS_MODULE,\
.curr_table = da9055_current_limits,\
.n_current_limits = ARRAY_SIZE(da9055_current_limits),\
.csel_reg = DA9055_REG_BUCK_LIM,\
.csel_mask = (mbits),\
},\
.conf = {\
.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
.sel_mask = (1 << 4),\
.en_mask = 1,\
},\
.volt = {\
.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
.sl_shift = 7,\
.v_mask = (1 << (vbits)) - 1,\
},\
.mode = {\
.reg = DA9055_REG_BCORE_MODE,\
.mask = (mbits),\
.shift = (sbits),\
},\
}
static struct da9055_regulator_info da9055_regulator_info[] = {
DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
};
/*
* Configures regulator to be controlled either through GPIO 1 or 2.
* GPIO can control regulator state and/or select the regulator register
* set A/B for voltage ramping.
*/
static int da9055_gpio_init(struct da9055_regulator *regulator,
struct regulator_config *config,
struct da9055_pdata *pdata, int id)
{
struct da9055_regulator_info *info = regulator->info;
int ret = 0;
if (!pdata)
return 0;
if (pdata->gpio_ren && pdata->gpio_ren[id]) {
char name[18];
int gpio_mux = pdata->gpio_ren[id];
config->ena_gpiod = pdata->ena_gpiods[id];
/*
* GPI pin is muxed with regulator to control the
* regulator state.
*/
sprintf(name, "DA9055 GPI %d", gpio_mux);
ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
name);
if (ret < 0)
goto err;
/*
* Let the regulator know that its state is controlled
* through GPI.
*/
ret = da9055_reg_update(regulator->da9055, info->conf.reg,
DA9055_E_GPI_MASK,
pdata->reg_ren[id]
<< DA9055_E_GPI_SHIFT);
if (ret < 0)
goto err;
}
if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
char name[18];
int gpio_mux = pdata->gpio_rsel[id];
regulator->reg_rselect = pdata->reg_rsel[id];
/*
* GPI pin is muxed with regulator to select the
* regulator register set A/B for voltage ramping.
*/
sprintf(name, "DA9055 GPI %d", gpio_mux);
ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
name);
if (ret < 0)
goto err;
/*
* Let the regulator know that its register set A/B
* will be selected through GPI for voltage ramping.
*/
ret = da9055_reg_update(regulator->da9055, info->conf.reg,
DA9055_V_GPI_MASK,
pdata->reg_rsel[id]
<< DA9055_V_GPI_SHIFT);
}
err:
return ret;
}
static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
{
struct da9055_regulator *regulator = data;
regulator_notifier_call_chain(regulator->rdev,
REGULATOR_EVENT_OVER_CURRENT, NULL);
return IRQ_HANDLED;
}
static inline struct da9055_regulator_info *find_regulator_info(int id)
{
struct da9055_regulator_info *info;
int i;
for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
info = &da9055_regulator_info[i];
if (info->reg_desc.id == id)
return info;
}
return NULL;
}
static int da9055_regulator_probe(struct platform_device *pdev)
{
struct regulator_config config = { };
struct da9055_regulator *regulator;
struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
struct da9055_pdata *pdata = dev_get_platdata(da9055->dev);
int ret, irq;
regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
GFP_KERNEL);
if (!regulator)
return -ENOMEM;
regulator->info = find_regulator_info(pdev->id);
if (regulator->info == NULL) {
dev_err(&pdev->dev, "invalid regulator ID specified\n");
return -EINVAL;
}
regulator->da9055 = da9055;
config.dev = da9055->dev;
config.driver_data = regulator;
config.regmap = da9055->regmap;
if (pdata)
config.init_data = pdata->regulators[pdev->id];
ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
if (ret < 0)
return ret;
regulator->rdev = devm_regulator_register(&pdev->dev,
&regulator->info->reg_desc,
&config);
if (IS_ERR(regulator->rdev)) {
dev_err(&pdev->dev, "Failed to register regulator %s\n",
regulator->info->reg_desc.name);
return PTR_ERR(regulator->rdev);
}
/* Only LDO 5 and 6 has got the over current interrupt */
if (pdev->id == DA9055_ID_LDO5 || pdev->id == DA9055_ID_LDO6) {
irq = platform_get_irq_byname(pdev, "REGULATOR");
if (irq < 0)
return irq;
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
da9055_ldo5_6_oc_irq,
IRQF_TRIGGER_HIGH |
IRQF_ONESHOT |
IRQF_PROBE_SHARED,
pdev->name, regulator);
if (ret != 0) {
if (ret != -EBUSY) {
dev_err(&pdev->dev,
"Failed to request Regulator IRQ %d: %d\n",
irq, ret);
return ret;
}
}
}
platform_set_drvdata(pdev, regulator);
return 0;
}
static struct platform_driver da9055_regulator_driver = {
.probe = da9055_regulator_probe,
.driver = {
.name = "da9055-regulator",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
static int __init da9055_regulator_init(void)
{
return platform_driver_register(&da9055_regulator_driver);
}
subsys_initcall(da9055_regulator_init);
static void __exit da9055_regulator_exit(void)
{
platform_driver_unregister(&da9055_regulator_driver);
}
module_exit(da9055_regulator_exit);
MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9055-regulator");
Reference in New Issue View Git Blame Copy Permalink