mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 19:45:06 +08:00
d95adfd458
With l4 interconnect hierarchy and ti-sysc interconnect target module data in place, we can simply move all the related child devices to their proper location and enable probing using ti-sysc. In general the first child device address range starts at range 0 from the ti-sysc interconnect target so the move involves adjusting the child device reg properties for that. In case of any regressions, problem devices can be reverted to probe with legacy platform data as needed by moving them back and removing the related interconnect target module node. Note that we are not yet moving dss or wkup_m3, those will be moved later after some related driver changes. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
356 lines
8.0 KiB
Plaintext
356 lines
8.0 KiB
Plaintext
/*
|
|
* Device Tree Source for AM4372 SoC
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/bus/ti-sysc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/am4.h>
|
|
|
|
/ {
|
|
compatible = "ti,am4372", "ti,am43";
|
|
interrupt-parent = <&wakeupgen>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
chosen { };
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
ethernet0 = &cpsw_emac0;
|
|
ethernet1 = &cpsw_emac1;
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu: cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
|
|
clocks = <&dpll_mpu_ck>;
|
|
clock-names = "cpu";
|
|
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: opp-table {
|
|
compatible = "operating-points-v2-ti-cpu";
|
|
syscon = <&scm_conf>;
|
|
|
|
opp50-300000000 {
|
|
opp-hz = /bits/ 64 <300000000>;
|
|
opp-microvolt = <950000 931000 969000>;
|
|
opp-supported-hw = <0xFF 0x01>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp100-600000000 {
|
|
opp-hz = /bits/ 64 <600000000>;
|
|
opp-microvolt = <1100000 1078000 1122000>;
|
|
opp-supported-hw = <0xFF 0x04>;
|
|
};
|
|
|
|
opp120-720000000 {
|
|
opp-hz = /bits/ 64 <720000000>;
|
|
opp-microvolt = <1200000 1176000 1224000>;
|
|
opp-supported-hw = <0xFF 0x08>;
|
|
};
|
|
|
|
oppturbo-800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = <1260000 1234800 1285200>;
|
|
opp-supported-hw = <0xFF 0x10>;
|
|
};
|
|
|
|
oppnitro-1000000000 {
|
|
opp-hz = /bits/ 64 <1000000000>;
|
|
opp-microvolt = <1325000 1298500 1351500>;
|
|
opp-supported-hw = <0xFF 0x20>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap4-mpu";
|
|
ti,hwmods = "mpu";
|
|
pm-sram = <&pm_sram_code
|
|
&pm_sram_data>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@48241000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48241000 0x1000>,
|
|
<0x48240100 0x0100>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
wakeupgen: interrupt-controller@48281000 {
|
|
compatible = "ti,omap4-wugen-mpu";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48281000 0x1000>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
scu: scu@48240000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0x48240000 0x100>;
|
|
};
|
|
|
|
global_timer: timer@48240200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x48240200 0x100>;
|
|
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-parent = <&gic>;
|
|
clocks = <&mpu_periphclk>;
|
|
};
|
|
|
|
local_timer: timer@48240600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0x48240600 0x100>;
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-parent = <&gic>;
|
|
clocks = <&mpu_periphclk>;
|
|
};
|
|
|
|
l2-cache-controller@48242000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x48242000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
ocp@44000000 {
|
|
compatible = "ti,am4372-l3-noc", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main";
|
|
ti,no-idle;
|
|
reg = <0x44000000 0x400000
|
|
0x44800000 0x400000>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
l4_wkup: interconnect@44c00000 {
|
|
wkup_m3: wkup_m3@100000 {
|
|
compatible = "ti,am4372-wkup-m3";
|
|
reg = <0x100000 0x4000>,
|
|
<0x180000 0x2000>;
|
|
reg-names = "umem", "dmem";
|
|
ti,hwmods = "wkup_m3";
|
|
ti,pm-firmware = "am335x-pm-firmware.elf";
|
|
};
|
|
};
|
|
l4_per: interconnect@48000000 {
|
|
};
|
|
l4_fast: interconnect@4a000000 {
|
|
};
|
|
|
|
emif: emif@4c000000 {
|
|
compatible = "ti,emif-am4372";
|
|
reg = <0x4c000000 0x1000000>;
|
|
ti,hwmods = "emif";
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,no-idle;
|
|
sram = <&pm_sram_code
|
|
&pm_sram_data>;
|
|
};
|
|
|
|
edma: edma@49000000 {
|
|
compatible = "ti,edma3-tpcc";
|
|
ti,hwmods = "tpcc";
|
|
reg = <0x49000000 0x10000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_ccint", "edma3_mperr",
|
|
"edma3_ccerrint";
|
|
dma-requests = <64>;
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
|
|
<&edma_tptc2 0>;
|
|
|
|
ti,edma-memcpy-channels = <58 59>;
|
|
};
|
|
|
|
edma_tptc0: tptc@49800000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc0";
|
|
reg = <0x49800000 0x100000>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_tcerrint";
|
|
};
|
|
|
|
edma_tptc1: tptc@49900000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc1";
|
|
reg = <0x49900000 0x100000>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_tcerrint";
|
|
};
|
|
|
|
edma_tptc2: tptc@49a00000 {
|
|
compatible = "ti,edma3-tptc";
|
|
ti,hwmods = "tptc2";
|
|
reg = <0x49a00000 0x100000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma3_tcerrint";
|
|
};
|
|
|
|
mmc3: mmc@47810000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x47810000 0x1000>;
|
|
ti,hwmods = "mmc3";
|
|
ti,needs-special-reset;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sham: sham@53100000 {
|
|
compatible = "ti,omap5-sham";
|
|
ti,hwmods = "sham";
|
|
reg = <0x53100000 0x300>;
|
|
dmas = <&edma 36 0>;
|
|
dma-names = "rx";
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
aes: aes@53501000 {
|
|
compatible = "ti,omap4-aes";
|
|
ti,hwmods = "aes";
|
|
reg = <0x53501000 0xa0>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&edma 6 0>,
|
|
<&edma 5 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
des: des@53701000 {
|
|
compatible = "ti,omap4-des";
|
|
ti,hwmods = "des";
|
|
reg = <0x53701000 0xa0>;
|
|
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&edma 34 0>,
|
|
<&edma 33 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
gpmc: gpmc@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
dmas = <&edma 52 0>;
|
|
dma-names = "rxtx";
|
|
clocks = <&l3s_gclk>;
|
|
clock-names = "fck";
|
|
reg = <0x50000000 0x2000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpmc,num-cs = <7>;
|
|
gpmc,num-waitpins = <2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: spi@47900000 {
|
|
compatible = "ti,am4372-qspi";
|
|
reg = <0x47900000 0x100>,
|
|
<0x30000000 0x4000000>;
|
|
reg-names = "qspi_base", "qspi_mmap";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "qspi";
|
|
interrupts = <0 138 0x4>;
|
|
num-cs = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dss: dss@4832a000 {
|
|
compatible = "ti,omap3-dss";
|
|
reg = <0x4832a000 0x200>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_core";
|
|
clocks = <&disp_clk>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dispc: dispc@4832a400 {
|
|
compatible = "ti,omap3-dispc";
|
|
reg = <0x4832a400 0x400>;
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,hwmods = "dss_dispc";
|
|
clocks = <&disp_clk>;
|
|
clock-names = "fck";
|
|
};
|
|
|
|
rfbi: rfbi@4832a800 {
|
|
compatible = "ti,omap3-rfbi";
|
|
reg = <0x4832a800 0x100>;
|
|
ti,hwmods = "dss_rfbi";
|
|
clocks = <&disp_clk>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
ocmcram: ocmcram@40300000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x40300000 0x40000>; /* 256k */
|
|
ranges = <0x0 0x40300000 0x40000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
pm_sram_code: pm-sram-code@0 {
|
|
compatible = "ti,sram";
|
|
reg = <0x0 0x1000>;
|
|
protect-exec;
|
|
};
|
|
|
|
pm_sram_data: pm-sram-data@1000 {
|
|
compatible = "ti,sram";
|
|
reg = <0x1000 0x1000>;
|
|
pool;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "am437x-l4.dtsi"
|
|
#include "am43xx-clocks.dtsi"
|