linux/drivers/media/video/cx23885/cx23885-reg.h
Igor M. Liplianin 5a23b0762c V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:05 -03:00

447 lines
13 KiB
C

/*
* Driver for the Conexant CX23885 PCIe bridge
*
* Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _CX23885_REG_H_
#define _CX23885_REG_H_
/*
Address Map
0x00000000 -> 0x00009000 TX SRAM (Fifos)
0x00010000 -> 0x00013c00 RX SRAM CMDS + CDT
EACH CMDS struct is 0x80 bytes long
DMAx_PTR1 = 0x03040 address of first cluster
DMAx_PTR2 = 0x10600 address of the CDT
DMAx_CNT1 = cluster size in (bytes >> 4) -1
DMAx_CNT2 = total cdt size for all entries >> 3
Cluster Descriptor entry = 4 DWORDS
DWORD 0 -> ptr to cluster
DWORD 1 Reserved
DWORD 2 Reserved
DWORD 3 Reserved
Channel manager Data Structure entry = 20 DWORD
0 IntialProgramCounterLow
1 IntialProgramCounterHigh
2 ClusterDescriptorTableBase
3 ClusterDescriptorTableSize
4 InstructionQueueBase
5 InstructionQueueSize
... Reserved
19 Reserved
*/
/* Risc Instructions */
#define RISC_CNT_INC 0x00010000
#define RISC_CNT_RESET 0x00030000
#define RISC_IRQ1 0x01000000
#define RISC_IRQ2 0x02000000
#define RISC_EOL 0x04000000
#define RISC_SOL 0x08000000
#define RISC_WRITE 0x10000000
#define RISC_SKIP 0x20000000
#define RISC_JUMP 0x70000000
#define RISC_SYNC 0x80000000
#define RISC_RESYNC 0x80008000
#define RISC_READ 0x90000000
#define RISC_WRITERM 0xB0000000
#define RISC_WRITECM 0xC0000000
#define RISC_WRITECR 0xD0000000
#define RISC_WRITEC 0x50000000
#define RISC_READC 0xA0000000
/* Audio and Video Core */
#define HOST_REG1 0x00000000
#define HOST_REG2 0x00000001
#define HOST_REG3 0x00000002
/* Chip Configuration Registers */
#define CHIP_CTRL 0x00000100
#define AFE_CTRL 0x00000104
#define VID_PLL_INT_POST 0x00000108
#define VID_PLL_FRAC 0x0000010C
#define AUX_PLL_INT_POST 0x00000110
#define AUX_PLL_FRAC 0x00000114
#define SYS_PLL_INT_POST 0x00000118
#define SYS_PLL_FRAC 0x0000011C
#define PIN_CTRL 0x00000120
#define AUD_IO_CTRL 0x00000124
#define AUD_LOCK1 0x00000128
#define AUD_LOCK2 0x0000012C
#define POWER_CTRL 0x00000130
#define AFE_DIAG_CTRL1 0x00000134
#define AFE_DIAG_CTRL3 0x0000013C
#define PLL_DIAG_CTRL 0x00000140
#define AFE_CLK_OUT_CTRL 0x00000144
#define DLL1_DIAG_CTRL 0x0000015C
/* GPIO[23:19] Output Enable */
#define GPIO2_OUT_EN_REG 0x00000160
/* GPIO[23:19] Data Registers */
#define GPIO2 0x00000164
#define IFADC_CTRL 0x00000180
/* Infrared Remote Registers */
#define IR_CNTRL_REG 0x00000200
#define IR_TXCLK_REG 0x00000204
#define IR_RXCLK_REG 0x00000208
#define IR_CDUTY_REG 0x0000020C
#define IR_STAT_REG 0x00000210
#define IR_IRQEN_REG 0x00000214
#define IR_FILTR_REG 0x00000218
#define IR_FIFO_REG 0x0000023C
/* Video Decoder Registers */
#define MODE_CTRL 0x00000400
#define OUT_CTRL1 0x00000404
#define OUT_CTRL2 0x00000408
#define GEN_STAT 0x0000040C
#define INT_STAT_MASK 0x00000410
#define LUMA_CTRL 0x00000414
#define HSCALE_CTRL 0x00000418
#define VSCALE_CTRL 0x0000041C
#define CHROMA_CTRL 0x00000420
#define VBI_LINE_CTRL1 0x00000424
#define VBI_LINE_CTRL2 0x00000428
#define VBI_LINE_CTRL3 0x0000042C
#define VBI_LINE_CTRL4 0x00000430
#define VBI_LINE_CTRL5 0x00000434
#define VBI_FC_CFG 0x00000438
#define VBI_MISC_CFG1 0x0000043C
#define VBI_MISC_CFG2 0x00000440
#define VBI_PAY1 0x00000444
#define VBI_PAY2 0x00000448
#define VBI_CUST1_CFG1 0x0000044C
#define VBI_CUST1_CFG2 0x00000450
#define VBI_CUST1_CFG3 0x00000454
#define VBI_CUST2_CFG1 0x00000458
#define VBI_CUST2_CFG2 0x0000045C
#define VBI_CUST2_CFG3 0x00000460
#define VBI_CUST3_CFG1 0x00000464
#define VBI_CUST3_CFG2 0x00000468
#define VBI_CUST3_CFG3 0x0000046C
#define HORIZ_TIM_CTRL 0x00000470
#define VERT_TIM_CTRL 0x00000474
#define SRC_COMB_CFG 0x00000478
#define CHROMA_VBIOFF_CFG 0x0000047C
#define FIELD_COUNT 0x00000480
#define MISC_TIM_CTRL 0x00000484
#define DFE_CTRL1 0x00000488
#define DFE_CTRL2 0x0000048C
#define DFE_CTRL3 0x00000490
#define PLL_CTRL 0x00000494
#define HTL_CTRL 0x00000498
#define COMB_CTRL 0x0000049C
#define CRUSH_CTRL 0x000004A0
#define SOFT_RST_CTRL 0x000004A4
#define CX885_VERSION 0x000004B4
#define VBI_PASS_CTRL 0x000004BC
/* Audio Decoder Registers */
/* 8051 Configuration */
#define DL_CTL 0x00000800
#define STD_DET_STATUS 0x00000804
#define STD_DET_CTL 0x00000808
#define DW8051_INT 0x0000080C
#define GENERAL_CTL 0x00000810
#define AAGC_CTL 0x00000814
#define DEMATRIX_CTL 0x000008CC
#define PATH1_CTL1 0x000008D0
#define PATH1_VOL_CTL 0x000008D4
#define PATH1_EQ_CTL 0x000008D8
#define PATH1_SC_CTL 0x000008DC
#define PATH2_CTL1 0x000008E0
#define PATH2_VOL_CTL 0x000008E4
#define PATH2_EQ_CTL 0x000008E8
#define PATH2_SC_CTL 0x000008EC
/* Sample Rate Converter */
#define SRC_CTL 0x000008F0
#define SRC_LF_COEF 0x000008F4
#define SRC1_CTL 0x000008F8
#define SRC2_CTL 0x000008FC
#define SRC3_CTL 0x00000900
#define SRC4_CTL 0x00000904
#define SRC5_CTL 0x00000908
#define SRC6_CTL 0x0000090C
#define BAND_OUT_SEL 0x00000910
#define I2S_N_CTL 0x00000914
#define I2S_OUT_CTL 0x00000918
#define AUTOCONFIG_REG 0x000009C4
/* Audio ADC Registers */
#define DSM_CTRL1 0x00000000
#define DSM_CTRL2 0x00000001
#define CHP_EN_CTRL 0x00000002
#define CHP_CLK_CTRL1 0x00000004
#define CHP_CLK_CTRL2 0x00000005
#define BG_REF_CTRL 0x00000006
#define SD2_SW_CTRL1 0x00000008
#define SD2_SW_CTRL2 0x00000009
#define SD2_BIAS_CTRL 0x0000000A
#define AMP_BIAS_CTRL 0x0000000C
#define CH_PWR_CTRL1 0x0000000E
#define CH_PWR_CTRL2 0x0000000F
#define DSM_STATUS1 0x00000010
#define DSM_STATUS2 0x00000011
#define DIG_CTL1 0x00000012
#define DIG_CTL2 0x00000013
#define I2S_TX_CFG 0x0000001A
#define DEV_CNTRL2 0x00040000
#define PCI_MSK_GPIO1 (1 << 24)
#define PCI_MSK_GPIO0 (1 << 23)
#define PCI_MSK_APB_DMA (1 << 12)
#define PCI_MSK_AL_WR (1 << 11)
#define PCI_MSK_AL_RD (1 << 10)
#define PCI_MSK_RISC_WR (1 << 9)
#define PCI_MSK_RISC_RD (1 << 8)
#define PCI_MSK_AUD_EXT (1 << 4)
#define PCI_MSK_AUD_INT (1 << 3)
#define PCI_MSK_VID_C (1 << 2)
#define PCI_MSK_VID_B (1 << 1)
#define PCI_MSK_VID_A 1
#define PCI_INT_MSK 0x00040010
#define PCI_INT_STAT 0x00040014
#define PCI_INT_MSTAT 0x00040018
#define VID_A_INT_MSK 0x00040020
#define VID_A_INT_STAT 0x00040024
#define VID_A_INT_MSTAT 0x00040028
#define VID_A_INT_SSTAT 0x0004002C
#define VID_B_INT_MSK 0x00040030
#define VID_B_MSK_BAD_PKT (1 << 20)
#define VID_B_MSK_VBI_OPC_ERR (1 << 17)
#define VID_B_MSK_OPC_ERR (1 << 16)
#define VID_B_MSK_VBI_SYNC (1 << 13)
#define VID_B_MSK_SYNC (1 << 12)
#define VID_B_MSK_VBI_OF (1 << 9)
#define VID_B_MSK_OF (1 << 8)
#define VID_B_MSK_VBI_RISCI2 (1 << 5)
#define VID_B_MSK_RISCI2 (1 << 4)
#define VID_B_MSK_VBI_RISCI1 (1 << 1)
#define VID_B_MSK_RISCI1 1
#define VID_B_INT_STAT 0x00040034
#define VID_B_INT_MSTAT 0x00040038
#define VID_B_INT_SSTAT 0x0004003C
#define VID_B_MSK_BAD_PKT (1 << 20)
#define VID_B_MSK_OPC_ERR (1 << 16)
#define VID_B_MSK_SYNC (1 << 12)
#define VID_B_MSK_OF (1 << 8)
#define VID_B_MSK_RISCI2 (1 << 4)
#define VID_B_MSK_RISCI1 1
#define VID_C_MSK_BAD_PKT (1 << 20)
#define VID_C_MSK_OPC_ERR (1 << 16)
#define VID_C_MSK_SYNC (1 << 12)
#define VID_C_MSK_OF (1 << 8)
#define VID_C_MSK_RISCI2 (1 << 4)
#define VID_C_MSK_RISCI1 1
/* A superset for testing purposes */
#define VID_BC_MSK_BAD_PKT (1 << 20)
#define VID_BC_MSK_OPC_ERR (1 << 16)
#define VID_BC_MSK_SYNC (1 << 12)
#define VID_BC_MSK_OF (1 << 8)
#define VID_BC_MSK_RISCI2 (1 << 4)
#define VID_BC_MSK_RISCI1 1
#define VID_C_INT_MSK 0x00040040
#define VID_C_INT_STAT 0x00040044
#define VID_C_INT_MSTAT 0x00040048
#define VID_C_INT_SSTAT 0x0004004C
#define AUDIO_INT_INT_MSK 0x00040050
#define AUDIO_INT_INT_STAT 0x00040054
#define AUDIO_INT_INT_MSTAT 0x00040058
#define AUDIO_INT_INT_SSTAT 0x0004005C
#define AUDIO_EXT_INT_MSK 0x00040060
#define AUDIO_EXT_INT_STAT 0x00040064
#define AUDIO_EXT_INT_MSTAT 0x00040068
#define AUDIO_EXT_INT_SSTAT 0x0004006C
#define RDR_CFG0 0x00050000
#define RDR_CFG1 0x00050004
#define RDR_CFG2 0x00050008
#define RDR_TLCTL0 0x00050318
/* APB DMAC Current Buffer Pointer */
#define DMA1_PTR1 0x00100000
#define DMA2_PTR1 0x00100004
#define DMA3_PTR1 0x00100008
#define DMA4_PTR1 0x0010000C
#define DMA5_PTR1 0x00100010
#define DMA6_PTR1 0x00100014
#define DMA7_PTR1 0x00100018
#define DMA8_PTR1 0x0010001C
/* APB DMAC Current Table Pointer */
#define DMA1_PTR2 0x00100040
#define DMA2_PTR2 0x00100044
#define DMA3_PTR2 0x00100048
#define DMA4_PTR2 0x0010004C
#define DMA5_PTR2 0x00100050
#define DMA6_PTR2 0x00100054
#define DMA7_PTR2 0x00100058
#define DMA8_PTR2 0x0010005C
/* APB DMAC Buffer Limit */
#define DMA1_CNT1 0x00100080
#define DMA2_CNT1 0x00100084
#define DMA3_CNT1 0x00100088
#define DMA4_CNT1 0x0010008C
#define DMA5_CNT1 0x00100090
#define DMA6_CNT1 0x00100094
#define DMA7_CNT1 0x00100098
#define DMA8_CNT1 0x0010009C
/* APB DMAC Table Size */
#define DMA1_CNT2 0x001000C0
#define DMA2_CNT2 0x001000C4
#define DMA3_CNT2 0x001000C8
#define DMA4_CNT2 0x001000CC
#define DMA5_CNT2 0x001000D0
#define DMA6_CNT2 0x001000D4
#define DMA7_CNT2 0x001000D8
#define DMA8_CNT2 0x001000DC
/* Timer Counters */
#define TM_CNT_LDW 0x00110000
#define TM_CNT_UW 0x00110004
#define TM_LMT_LDW 0x00110008
#define TM_LMT_UW 0x0011000C
/* GPIO */
#define GP0_IO 0x00110010
#define GPIO_ISM 0x00110014
#define SOFT_RESET 0x0011001C
/* GPIO (417 Microsoftcontroller) RW Data */
#define MC417_RWD 0x00110020
/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */
#define MC417_OEN 0x00110024
#define MC417_CTL 0x00110028
#define ALT_PIN_OUT_SEL 0x0011002C
#define CLK_DELAY 0x00110048
#define PAD_CTRL 0x0011004C
/* Video A Interface */
#define VID_A_GPCNT 0x00130020
#define VBI_A_GPCNT 0x00130024
#define VID_A_GPCNT_CTL 0x00130030
#define VBI_A_GPCNT_CTL 0x00130034
#define VID_A_DMA_CTL 0x00130040
#define VID_A_VIP_CTRL 0x00130080
#define VID_A_PIXEL_FRMT 0x00130084
#define VID_A_VBI_CTRL 0x00130088
/* Video B Interface */
#define VID_B_DMA 0x00130100
#define VBI_B_DMA 0x00130108
#define VID_B_GPCNT 0x00130120
#define VBI_B_GPCNT 0x00130124
#define VID_B_GPCNT_CTL 0x00130134
#define VBI_B_GPCNT_CTL 0x00130138
#define VID_B_DMA_CTL 0x00130140
#define VID_B_SRC_SEL 0x00130144
#define VID_B_LNGTH 0x00130150
#define VID_B_HW_SOP_CTL 0x00130154
#define VID_B_GEN_CTL 0x00130158
#define VID_B_BD_PKT_STATUS 0x0013015C
#define VID_B_SOP_STATUS 0x00130160
#define VID_B_FIFO_OVFL_STAT 0x00130164
#define VID_B_VLD_MISC 0x00130168
#define VID_B_TS_CLK_EN 0x0013016C
#define VID_B_VIP_CTRL 0x00130180
#define VID_B_PIXEL_FRMT 0x00130184
/* Video C Interface */
#define VID_C_GPCNT 0x00130220
#define VID_C_GPCNT_CTL 0x00130230
#define VBI_C_GPCNT_CTL 0x00130234
#define VID_C_DMA_CTL 0x00130240
#define VID_C_LNGTH 0x00130250
#define VID_C_HW_SOP_CTL 0x00130254
#define VID_C_GEN_CTL 0x00130258
#define VID_C_BD_PKT_STATUS 0x0013025C
#define VID_C_SOP_STATUS 0x00130260
#define VID_C_FIFO_OVFL_STAT 0x00130264
#define VID_C_VLD_MISC 0x00130268
#define VID_C_TS_CLK_EN 0x0013026C
/* Internal Audio Interface */
#define AUD_INT_A_GPCNT 0x00140020
#define AUD_INT_B_GPCNT 0x00140024
#define AUD_INT_A_GPCNT_CTL 0x00140030
#define AUD_INT_B_GPCNT_CTL 0x00140034
#define AUD_INT_DMA_CTL 0x00140040
#define AUD_INT_A_LNGTH 0x00140050
#define AUD_INT_B_LNGTH 0x00140054
#define AUD_INT_A_MODE 0x00140058
#define AUD_INT_B_MODE 0x0014005C
/* External Audio Interface */
#define AUD_EXT_DMA 0x00140100
#define AUD_EXT_GPCNT 0x00140120
#define AUD_EXT_GPCNT_CTL 0x00140130
#define AUD_EXT_DMA_CTL 0x00140140
#define AUD_EXT_LNGTH 0x00140150
#define AUD_EXT_A_MODE 0x00140158
/* I2C Bus 1 */
#define I2C1_ADDR 0x00180000
#define I2C1_WDATA 0x00180004
#define I2C1_CTRL 0x00180008
#define I2C1_RDATA 0x0018000C
#define I2C1_STAT 0x00180010
/* I2C Bus 2 */
#define I2C2_ADDR 0x00190000
#define I2C2_WDATA 0x00190004
#define I2C2_CTRL 0x00190008
#define I2C2_RDATA 0x0019000C
#define I2C2_STAT 0x00190010
/* I2C Bus 3 */
#define I2C3_ADDR 0x001A0000
#define I2C3_WDATA 0x001A0004
#define I2C3_CTRL 0x001A0008
#define I2C3_RDATA 0x001A000C
#define I2C3_STAT 0x001A0010
/* UART */
#define UART_CTL 0x001B0000
#define UART_BRD 0x001B0004
#define UART_ISR 0x001B000C
#define UART_CNT 0x001B0010
#endif /* _CX23885_REG_H_ */