linux/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
Fabio Estevam 8bc361ba0b ARM: dts: imx6qdl-aristainetos: Move display node out of 'soc'
Move disp0 node from soc node to root node.

disp0 node does not have any register properties and thus
shouldn't be placed on the bus.

This fixes the following build warnings with W=1:

arch/arm/boot/dts/imx6dl-aristainetos_4.dtb: Warning (simple_bus_reg): Node /soc/disp0 missing or empty reg/ranges property

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 16:15:44 +08:00

77 lines
1.5 KiB
Plaintext

/*
* support fot the imx6 based aristainetos board
*
* Copyright (C) 2014 Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-aristainetos.dtsi"
/ {
model = "aristainetos i.MX6 Dual Lite Board 7";
compatible = "fsl,imx6dl";
memory {
reg = <0x10000000 0x40000000>;
};
display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp>;
status = "okay";
display-timings {
800x480p60 {
native-mode;
clock-frequency = <33246000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <88>;
hback-porch = <88>;
hsync-len = <80>;
vback-porch = <10>;
vfront-porch = <10>;
vsync-len = <25>;
vsync-active = <1>;
};
};
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 3000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&pwm3 {
status = "okay";
};