mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
2afad1be58
On i.MX6SLL EVK board, pfuze100 sw4 supplies LPDDR3 which is critical for system, must be always on. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
464 lines
11 KiB
Plaintext
464 lines
11 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017-2018 NXP.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "imx6sll.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX6SLL EVK Board";
|
|
compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0x80000000 0x80000000>;
|
|
};
|
|
|
|
backlight_display: backlight-display {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
status = "okay";
|
|
};
|
|
|
|
reg_usb_otg1_vbus: regulator-otg1-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
|
|
regulator-name = "usb_otg1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg2_vbus: regulator-otg2-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
|
|
regulator-name = "usb_otg2_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_aud3v: regulator-aud3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "wm8962-supply-3v15";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_aud4v: regulator-aud4v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "wm8962-supply-4v2";
|
|
regulator-min-microvolt = <4325000>;
|
|
regulator-max-microvolt = <4325000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_lcd_3v3: regulator-lcd-3v3 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
|
|
regulator-name = "lcd-3v3";
|
|
gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_lcd_5v: regulator-lcd-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lcd-5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_sd1_vmmc: regulator-sd1-vmmc {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
|
|
regulator-name = "SD1_SPWR";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_sd3_vmmc: regulator-sd3-vmmc {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
|
|
regulator-name = "SD3_WIFI";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
panel {
|
|
compatible = "sii,43wvf1g";
|
|
backlight = <&backlight_display>;
|
|
dvdd-supply = <®_lcd_3v3>;
|
|
avdd-supply = <®_lcd_5v>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&display_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
arm-supply = <&sw1a_reg>;
|
|
soc-supply = <&sw1c_reg>;
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pfuze100: pmic@8 {
|
|
compatible = "fsl,pfuze100";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw1c_reg: sw1c {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&lcdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd>;
|
|
status = "okay";
|
|
|
|
port {
|
|
display_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
vmmc-supply = <®_sd1_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usb_otg1_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg1>;
|
|
disable-over-current;
|
|
srp-disable;
|
|
hnp-disable;
|
|
adp-disable;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usb_otg2_vbus>;
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
|
|
keep-power-in-suspend;
|
|
enable-sdio-wakeup;
|
|
vmmc-supply = <®_sd3_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg1_vbus: vbus1grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg2_vbus: vbus2grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_lcd_3v3: reglcd3v3grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
|
|
MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
|
|
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
|
|
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
|
|
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
|
|
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
|
|
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
|
|
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
|
|
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
|
|
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
|
|
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
|
|
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
|
|
MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
|
|
MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
|
|
MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
|
|
MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
|
|
MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg1: usbotg1grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061
|
|
MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061
|
|
MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061
|
|
MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061
|
|
MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061
|
|
MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061
|
|
MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1
|
|
MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1
|
|
MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1
|
|
MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1
|
|
MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1
|
|
MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1
|
|
MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9
|
|
MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
|
|
MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9
|
|
MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9
|
|
MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9
|
|
MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9
|
|
MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
|
|
MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcd: lcdgrp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
|
|
MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
|
|
MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
|
|
MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
|
|
MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
|
|
MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
|
|
MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
|
|
MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
|
|
MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
|
|
MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
|
|
MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
|
|
MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
|
|
MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
|
|
MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
|
|
MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
|
|
MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
|
|
MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
|
|
MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
|
|
MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
|
|
MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
|
|
MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
|
|
MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
|
|
MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
|
|
MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
|
|
MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
|
|
MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
|
|
MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
|
|
MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
|
|
MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pmw1grp {
|
|
fsl,pins = <
|
|
MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
|
|
>;
|
|
};
|
|
};
|