mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 14:44:10 +08:00
dd35a4debc
The RK808 is already using the proper <linux/gpio/consumer.h> header and includes the legacy headers <linux/gpio.h> and <linux/of_gpio.h> for no reason, drop the includes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230911-descriptors-regulator-v2-1-ce978c52c557@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
1755 lines
57 KiB
C
1755 lines
57 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Regulator driver for Rockchip RK805/RK808/RK818
|
|
*
|
|
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
|
*
|
|
* Author: Chris Zhong <zyw@rock-chips.com>
|
|
* Author: Zhang Qing <zhangqing@rock-chips.com>
|
|
* Author: Xu Shengfei <xsf@rock-chips.com>
|
|
*
|
|
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
|
|
*
|
|
* Author: Wadim Egorov <w.egorov@phytec.de>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/mfd/rk808.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
/* Field Definitions */
|
|
#define RK808_BUCK_VSEL_MASK 0x3f
|
|
#define RK808_BUCK4_VSEL_MASK 0xf
|
|
#define RK808_LDO_VSEL_MASK 0x1f
|
|
|
|
#define RK809_BUCK5_VSEL_MASK 0x7
|
|
|
|
#define RK817_LDO_VSEL_MASK 0x7f
|
|
#define RK817_BOOST_VSEL_MASK 0x7
|
|
#define RK817_BUCK_VSEL_MASK 0x7f
|
|
|
|
#define RK818_BUCK_VSEL_MASK 0x3f
|
|
#define RK818_BUCK4_VSEL_MASK 0x1f
|
|
#define RK818_LDO_VSEL_MASK 0x1f
|
|
#define RK818_LDO3_ON_VSEL_MASK 0xf
|
|
#define RK818_BOOST_ON_VSEL_MASK 0xe0
|
|
|
|
#define RK806_DCDC_SLP_REG_OFFSET 0x0A
|
|
#define RK806_NLDO_SLP_REG_OFFSET 0x05
|
|
#define RK806_PLDO_SLP_REG_OFFSET 0x06
|
|
|
|
#define RK806_BUCK_SEL_CNT 0xff
|
|
#define RK806_LDO_SEL_CNT 0xff
|
|
|
|
/* Ramp rate definitions for buck1 / buck2 only */
|
|
#define RK808_RAMP_RATE_OFFSET 3
|
|
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
|
|
|
|
#define RK808_DVS2_POL BIT(2)
|
|
#define RK808_DVS1_POL BIT(1)
|
|
|
|
/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
|
|
#define RK808_SLP_REG_OFFSET 1
|
|
|
|
/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
|
|
#define RK808_DVS_REG_OFFSET 2
|
|
|
|
/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
|
|
#define RK808_SLP_SET_OFF_REG_OFFSET 2
|
|
|
|
/* max steps for increase voltage of Buck1/2, equal 100mv*/
|
|
#define MAX_STEPS_ONE_TIME 8
|
|
|
|
#define ENABLE_MASK(id) (BIT(id) | BIT(4 + (id)))
|
|
#define DISABLE_VAL(id) (BIT(4 + (id)))
|
|
|
|
#define RK817_BOOST_DESC(_id, _match, _supply, _min, _max, _step, _vreg,\
|
|
_vmask, _ereg, _emask, _enval, _disval, _etime, m_drop) \
|
|
{ \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = (_id), \
|
|
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = (_min) * 1000, \
|
|
.uV_step = (_step) * 1000, \
|
|
.vsel_reg = (_vreg), \
|
|
.vsel_mask = (_vmask), \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.enable_val = (_enval), \
|
|
.disable_val = (_disval), \
|
|
.enable_time = (_etime), \
|
|
.min_dropout_uV = (m_drop) * 1000, \
|
|
.ops = &rk817_boost_ops, \
|
|
}
|
|
|
|
#define RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, _enval, _disval, _etime, _ops) \
|
|
{ \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = (_id), \
|
|
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = (_min) * 1000, \
|
|
.uV_step = (_step) * 1000, \
|
|
.vsel_reg = (_vreg), \
|
|
.vsel_mask = (_vmask), \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.enable_val = (_enval), \
|
|
.disable_val = (_disval), \
|
|
.enable_time = (_etime), \
|
|
.ops = _ops, \
|
|
}
|
|
|
|
#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, _etime) \
|
|
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops)
|
|
|
|
#define RK806_REGULATOR(_name, _supply_name, _id, _ops,\
|
|
_n_voltages, _vr, _er, _lr, ctrl_bit,\
|
|
_rr, _rm, _rt)\
|
|
[_id] = {\
|
|
.name = _name,\
|
|
.supply_name = _supply_name,\
|
|
.of_match = of_match_ptr(_name),\
|
|
.regulators_node = of_match_ptr("regulators"),\
|
|
.id = _id,\
|
|
.ops = &_ops,\
|
|
.type = REGULATOR_VOLTAGE,\
|
|
.n_voltages = _n_voltages,\
|
|
.linear_ranges = _lr,\
|
|
.n_linear_ranges = ARRAY_SIZE(_lr),\
|
|
.vsel_reg = _vr,\
|
|
.vsel_mask = 0xff,\
|
|
.enable_reg = _er,\
|
|
.enable_mask = ENABLE_MASK(ctrl_bit),\
|
|
.enable_val = ENABLE_MASK(ctrl_bit),\
|
|
.disable_val = DISABLE_VAL(ctrl_bit),\
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,\
|
|
.ramp_reg = _rr,\
|
|
.ramp_mask = _rm,\
|
|
.ramp_delay_table = _rt, \
|
|
.n_ramp_values = ARRAY_SIZE(_rt), \
|
|
.owner = THIS_MODULE,\
|
|
}
|
|
|
|
#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, _etime) \
|
|
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
|
|
|
|
#define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, _disval, _etime) \
|
|
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
|
|
_vmask, _ereg, _emask, _emask, _disval, _etime, &rk817_reg_ops)
|
|
|
|
#define RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
|
|
_enval, _disval, _ops) \
|
|
{ \
|
|
.name = (_match), \
|
|
.supply_name = (_supply), \
|
|
.of_match = of_match_ptr(_match), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = (_id), \
|
|
.enable_reg = (_ereg), \
|
|
.enable_mask = (_emask), \
|
|
.enable_val = (_enval), \
|
|
.disable_val = (_disval), \
|
|
.owner = THIS_MODULE, \
|
|
.ops = _ops \
|
|
}
|
|
|
|
#define RK817_DESC_SWITCH(_id, _match, _supply, _ereg, _emask, \
|
|
_disval) \
|
|
RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
|
|
_emask, _disval, &rk817_switch_ops)
|
|
|
|
#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
|
|
RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
|
|
0, 0, &rk808_switch_ops)
|
|
|
|
struct rk8xx_register_bit {
|
|
u8 reg;
|
|
u8 bit;
|
|
};
|
|
|
|
#define RK8XX_REG_BIT(_reg, _bit) \
|
|
{ \
|
|
.reg = _reg, \
|
|
.bit = BIT(_bit), \
|
|
}
|
|
|
|
struct rk808_regulator_data {
|
|
struct gpio_desc *dvs_gpio[2];
|
|
};
|
|
|
|
static const struct linear_range rk808_ldo3_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
|
|
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
|
|
};
|
|
|
|
#define RK809_BUCK5_SEL_CNT (8)
|
|
|
|
static const struct linear_range rk809_buck5_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0),
|
|
REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000),
|
|
REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000),
|
|
REGULATOR_LINEAR_RANGE(3300000, 6, 7, 300000),
|
|
};
|
|
|
|
#define RK817_BUCK1_MIN0 500000
|
|
#define RK817_BUCK1_MAX0 1500000
|
|
|
|
#define RK817_BUCK1_MIN1 1600000
|
|
#define RK817_BUCK1_MAX1 2400000
|
|
|
|
#define RK817_BUCK3_MAX1 3400000
|
|
|
|
#define RK817_BUCK1_STP0 12500
|
|
#define RK817_BUCK1_STP1 100000
|
|
|
|
#define RK817_BUCK1_SEL0 ((RK817_BUCK1_MAX0 - RK817_BUCK1_MIN0) /\
|
|
RK817_BUCK1_STP0)
|
|
#define RK817_BUCK1_SEL1 ((RK817_BUCK1_MAX1 - RK817_BUCK1_MIN1) /\
|
|
RK817_BUCK1_STP1)
|
|
|
|
#define RK817_BUCK3_SEL1 ((RK817_BUCK3_MAX1 - RK817_BUCK1_MIN1) /\
|
|
RK817_BUCK1_STP1)
|
|
|
|
#define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1)
|
|
#define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1)
|
|
|
|
static const struct linear_range rk817_buck1_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
|
|
RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
|
|
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
|
|
RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1),
|
|
};
|
|
|
|
static const struct linear_range rk817_buck3_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
|
|
RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
|
|
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
|
|
RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1),
|
|
};
|
|
|
|
static const unsigned int rk808_buck1_2_ramp_table[] = {
|
|
2000, 4000, 6000, 10000
|
|
};
|
|
|
|
/* RK817 RK809 */
|
|
static const unsigned int rk817_buck1_4_ramp_table[] = {
|
|
3000, 6300, 12500, 25000
|
|
};
|
|
|
|
static int rk806_set_mode_dcdc(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
int rid = rdev_get_id(rdev);
|
|
int ctr_bit, reg;
|
|
|
|
reg = RK806_POWER_FPWM_EN0 + rid / 8;
|
|
ctr_bit = rid % 8;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
PWM_MODE_MSK << ctr_bit,
|
|
FPWM_MODE << ctr_bit);
|
|
case REGULATOR_MODE_NORMAL:
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
PWM_MODE_MSK << ctr_bit,
|
|
AUTO_PWM_MODE << ctr_bit);
|
|
default:
|
|
dev_err(rdev_get_dev(rdev), "mode unsupported: %u\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int rk806_get_mode_dcdc(struct regulator_dev *rdev)
|
|
{
|
|
int rid = rdev_get_id(rdev);
|
|
int ctr_bit, reg;
|
|
unsigned int val;
|
|
int err;
|
|
|
|
reg = RK806_POWER_FPWM_EN0 + rid / 8;
|
|
ctr_bit = rid % 8;
|
|
|
|
err = regmap_read(rdev->regmap, reg, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
if ((val >> ctr_bit) & FPWM_MODE)
|
|
return REGULATOR_MODE_FAST;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static const struct rk8xx_register_bit rk806_dcdc_rate2[] = {
|
|
RK8XX_REG_BIT(0xEB, 0),
|
|
RK8XX_REG_BIT(0xEB, 1),
|
|
RK8XX_REG_BIT(0xEB, 2),
|
|
RK8XX_REG_BIT(0xEB, 3),
|
|
RK8XX_REG_BIT(0xEB, 4),
|
|
RK8XX_REG_BIT(0xEB, 5),
|
|
RK8XX_REG_BIT(0xEB, 6),
|
|
RK8XX_REG_BIT(0xEB, 7),
|
|
RK8XX_REG_BIT(0xEA, 0),
|
|
RK8XX_REG_BIT(0xEA, 1),
|
|
};
|
|
|
|
static const unsigned int rk806_ramp_delay_table_dcdc[] = {
|
|
50000, 25000, 12500, 6250, 3125, 1560, 961, 390
|
|
};
|
|
|
|
static int rk806_set_ramp_delay_dcdc(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
int rid = rdev_get_id(rdev);
|
|
int regval, ramp_value, ret;
|
|
|
|
ret = regulator_find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
|
|
rdev->desc->n_ramp_values, &ramp_value);
|
|
if (ret) {
|
|
dev_warn(rdev_get_dev(rdev),
|
|
"Can't set ramp-delay %u, setting %u\n", ramp_delay,
|
|
rdev->desc->ramp_delay_table[ramp_value]);
|
|
}
|
|
|
|
regval = ramp_value << (ffs(rdev->desc->ramp_mask) - 1);
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg,
|
|
rdev->desc->ramp_mask, regval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* The above is effectively a copy of regulator_set_ramp_delay_regmap(),
|
|
* but that only stores the lower 2 bits for rk806 DCDC ramp. The MSB must
|
|
* be stored in a separate register, so this open codes the implementation
|
|
* to have access to the ramp_value.
|
|
*/
|
|
|
|
regval = (ramp_value >> 2) & 0x1 ? rk806_dcdc_rate2[rid].bit : 0;
|
|
return regmap_update_bits(rdev->regmap, rk806_dcdc_rate2[rid].reg,
|
|
rk806_dcdc_rate2[rid].bit,
|
|
regval);
|
|
}
|
|
|
|
static const unsigned int rk806_ramp_delay_table_ldo[] = {
|
|
100000, 50000, 25000, 12500, 6280, 3120, 1900, 780
|
|
};
|
|
|
|
static int rk806_set_suspend_voltage_range(struct regulator_dev *rdev, int reg_offset, int uv)
|
|
{
|
|
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
|
|
unsigned int reg;
|
|
|
|
if (sel < 0)
|
|
return -EINVAL;
|
|
|
|
reg = rdev->desc->vsel_reg + reg_offset;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg, rdev->desc->vsel_mask, sel);
|
|
}
|
|
|
|
static int rk806_set_suspend_voltage_range_dcdc(struct regulator_dev *rdev, int uv)
|
|
{
|
|
return rk806_set_suspend_voltage_range(rdev, RK806_DCDC_SLP_REG_OFFSET, uv);
|
|
}
|
|
|
|
static int rk806_set_suspend_voltage_range_nldo(struct regulator_dev *rdev, int uv)
|
|
{
|
|
return rk806_set_suspend_voltage_range(rdev, RK806_NLDO_SLP_REG_OFFSET, uv);
|
|
}
|
|
|
|
static int rk806_set_suspend_voltage_range_pldo(struct regulator_dev *rdev, int uv)
|
|
{
|
|
return rk806_set_suspend_voltage_range(rdev, RK806_PLDO_SLP_REG_OFFSET, uv);
|
|
}
|
|
|
|
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
|
|
{
|
|
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
|
|
int id = rdev_get_id(rdev);
|
|
struct gpio_desc *gpio = pdata->dvs_gpio[id];
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (!gpio || gpiod_get_value(gpio) == 0)
|
|
return regulator_get_voltage_sel_regmap(rdev);
|
|
|
|
ret = regmap_read(rdev->regmap,
|
|
rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
|
|
&val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
val &= rdev->desc->vsel_mask;
|
|
val >>= ffs(rdev->desc->vsel_mask) - 1;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned sel)
|
|
{
|
|
int ret, delta_sel;
|
|
unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
tmp = val & ~mask;
|
|
old_sel = val & mask;
|
|
old_sel >>= ffs(mask) - 1;
|
|
delta_sel = sel - old_sel;
|
|
|
|
/*
|
|
* If directly modify the register to change the voltage, we will face
|
|
* the risk of overshoot. Put it into a multi-step, can effectively
|
|
* avoid this problem, a step is 100mv here.
|
|
*/
|
|
while (delta_sel > MAX_STEPS_ONE_TIME) {
|
|
old_sel += MAX_STEPS_ONE_TIME;
|
|
val = old_sel << (ffs(mask) - 1);
|
|
val |= tmp;
|
|
|
|
/*
|
|
* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
|
|
* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
|
|
* got more than 65 us between each voltage change and thus
|
|
* won't ramp faster than ~1500 uV / us.
|
|
*/
|
|
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
|
|
delta_sel = sel - old_sel;
|
|
}
|
|
|
|
sel <<= ffs(mask) - 1;
|
|
val = tmp | sel;
|
|
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
|
|
|
|
/*
|
|
* When we change the voltage register directly, the ramp rate is about
|
|
* 100000uv/us, wait 1us to make sure the target voltage to be stable,
|
|
* so we needn't wait extra time after that.
|
|
*/
|
|
udelay(1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned sel)
|
|
{
|
|
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
|
|
int id = rdev_get_id(rdev);
|
|
struct gpio_desc *gpio = pdata->dvs_gpio[id];
|
|
unsigned int reg = rdev->desc->vsel_reg;
|
|
unsigned old_sel;
|
|
int ret, gpio_level;
|
|
|
|
if (!gpio)
|
|
return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
|
|
|
|
gpio_level = gpiod_get_value(gpio);
|
|
if (gpio_level == 0) {
|
|
reg += RK808_DVS_REG_OFFSET;
|
|
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
|
|
} else {
|
|
ret = regmap_read(rdev->regmap,
|
|
reg + RK808_DVS_REG_OFFSET,
|
|
&old_sel);
|
|
}
|
|
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
sel <<= ffs(rdev->desc->vsel_mask) - 1;
|
|
sel |= old_sel & ~rdev->desc->vsel_mask;
|
|
|
|
ret = regmap_write(rdev->regmap, reg, sel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
gpiod_set_value(gpio, !gpio_level);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_selector,
|
|
unsigned int new_selector)
|
|
{
|
|
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
|
|
int id = rdev_get_id(rdev);
|
|
struct gpio_desc *gpio = pdata->dvs_gpio[id];
|
|
|
|
/* if there is no dvs1/2 pin, we don't need wait extra time here. */
|
|
if (!gpio)
|
|
return 0;
|
|
|
|
return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
|
|
}
|
|
|
|
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
|
|
{
|
|
unsigned int reg;
|
|
int sel = regulator_map_voltage_linear(rdev, uv, uv);
|
|
|
|
if (sel < 0)
|
|
return -EINVAL;
|
|
|
|
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
rdev->desc->vsel_mask,
|
|
sel);
|
|
}
|
|
|
|
static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
|
|
{
|
|
unsigned int reg;
|
|
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
|
|
|
|
if (sel < 0)
|
|
return -EINVAL;
|
|
|
|
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
rdev->desc->vsel_mask,
|
|
sel);
|
|
}
|
|
|
|
static int rk805_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
rdev->desc->enable_mask,
|
|
rdev->desc->enable_mask);
|
|
}
|
|
|
|
static int rk805_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
rdev->desc->enable_mask,
|
|
0);
|
|
}
|
|
|
|
static const struct rk8xx_register_bit rk806_suspend_bits[] = {
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 0),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 1),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 2),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 3),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 4),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 5),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 6),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 7),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 6),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 7),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 0),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 1),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 2),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 3),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 4),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 1),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 2),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 3),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 4),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 5),
|
|
RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 0),
|
|
};
|
|
|
|
static int rk806_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
int rid = rdev_get_id(rdev);
|
|
|
|
return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg,
|
|
rk806_suspend_bits[rid].bit,
|
|
rk806_suspend_bits[rid].bit);
|
|
}
|
|
|
|
static int rk806_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
int rid = rdev_get_id(rdev);
|
|
|
|
return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg,
|
|
rk806_suspend_bits[rid].bit, 0);
|
|
}
|
|
|
|
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
rdev->desc->enable_mask,
|
|
0);
|
|
}
|
|
|
|
static int rk808_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
rdev->desc->enable_mask,
|
|
rdev->desc->enable_mask);
|
|
}
|
|
|
|
static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev,
|
|
unsigned int en)
|
|
{
|
|
unsigned int reg;
|
|
int id = rdev_get_id(rdev);
|
|
unsigned int id_slp, msk, val;
|
|
|
|
if (id >= RK817_ID_DCDC1 && id <= RK817_ID_DCDC4)
|
|
id_slp = id;
|
|
else if (id >= RK817_ID_LDO1 && id <= RK817_ID_LDO8)
|
|
id_slp = 8 + (id - RK817_ID_LDO1);
|
|
else if (id >= RK817_ID_LDO9 && id <= RK809_ID_SW2)
|
|
id_slp = 4 + (id - RK817_ID_LDO9);
|
|
else
|
|
return -EINVAL;
|
|
|
|
reg = RK817_POWER_SLP_EN_REG(id_slp / 8);
|
|
|
|
msk = BIT(id_slp % 8);
|
|
if (en)
|
|
val = msk;
|
|
else
|
|
val = 0;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg, msk, val);
|
|
}
|
|
|
|
static int rk817_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
return rk817_set_suspend_enable_ctrl(rdev, 1);
|
|
}
|
|
|
|
static int rk817_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
return rk817_set_suspend_enable_ctrl(rdev, 0);
|
|
}
|
|
|
|
static int rk8xx_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
PWM_MODE_MSK, FPWM_MODE);
|
|
case REGULATOR_MODE_NORMAL:
|
|
return regmap_update_bits(rdev->regmap, reg,
|
|
PWM_MODE_MSK, AUTO_PWM_MODE);
|
|
default:
|
|
dev_err(&rdev->dev, "do not support this mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk8xx_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
|
|
PWM_MODE_MSK, FPWM_MODE);
|
|
case REGULATOR_MODE_NORMAL:
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
|
|
PWM_MODE_MSK, AUTO_PWM_MODE);
|
|
default:
|
|
dev_err(&rdev->dev, "do not support this mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int rk8xx_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int err;
|
|
|
|
err = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
if (val & FPWM_MODE)
|
|
return REGULATOR_MODE_FAST;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* add write mask bit */
|
|
val |= (rdev->desc->enable_mask & 0xf0);
|
|
val &= rdev->desc->enable_mask;
|
|
|
|
if (rdev->desc->enable_is_inverted) {
|
|
if (rdev->desc->enable_val)
|
|
return val != rdev->desc->enable_val;
|
|
return (val == 0);
|
|
}
|
|
if (rdev->desc->enable_val)
|
|
return val == rdev->desc->enable_val;
|
|
return val != 0;
|
|
}
|
|
|
|
static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case 1:
|
|
return REGULATOR_MODE_FAST;
|
|
case 2:
|
|
return REGULATOR_MODE_NORMAL;
|
|
default:
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
}
|
|
|
|
static const struct regulator_ops rk805_reg_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage,
|
|
.set_suspend_enable = rk805_set_suspend_enable,
|
|
.set_suspend_disable = rk805_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk805_switch_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_suspend_enable = rk805_set_suspend_enable,
|
|
.set_suspend_disable = rk805_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk806_ops_dcdc = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_mode = rk806_set_mode_dcdc,
|
|
.get_mode = rk806_get_mode_dcdc,
|
|
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
|
|
|
|
.set_suspend_mode = rk806_set_mode_dcdc,
|
|
.set_ramp_delay = rk806_set_ramp_delay_dcdc,
|
|
|
|
.set_suspend_voltage = rk806_set_suspend_voltage_range_dcdc,
|
|
.set_suspend_enable = rk806_set_suspend_enable,
|
|
.set_suspend_disable = rk806_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk806_ops_nldo = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
|
|
.set_suspend_voltage = rk806_set_suspend_voltage_range_nldo,
|
|
.set_suspend_enable = rk806_set_suspend_enable,
|
|
.set_suspend_disable = rk806_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk806_ops_pldo = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
|
|
.set_suspend_voltage = rk806_set_suspend_voltage_range_pldo,
|
|
.set_suspend_enable = rk806_set_suspend_enable,
|
|
.set_suspend_disable = rk806_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk808_buck1_2_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
|
|
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
|
|
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage,
|
|
.set_suspend_enable = rk808_set_suspend_enable,
|
|
.set_suspend_disable = rk808_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk808_reg_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage,
|
|
.set_suspend_enable = rk808_set_suspend_enable,
|
|
.set_suspend_disable = rk808_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk808_reg_ops_ranges = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage_range,
|
|
.set_suspend_enable = rk808_set_suspend_enable,
|
|
.set_suspend_disable = rk808_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk808_switch_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_suspend_enable = rk808_set_suspend_enable,
|
|
.set_suspend_disable = rk808_set_suspend_disable,
|
|
};
|
|
|
|
static const struct linear_range rk805_buck_1_2_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
|
|
REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
|
|
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
|
|
};
|
|
|
|
static const struct regulator_ops rk809_buck5_ops_range = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage_range,
|
|
.set_suspend_enable = rk817_set_suspend_enable,
|
|
.set_suspend_disable = rk817_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk817_reg_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage,
|
|
.set_suspend_enable = rk817_set_suspend_enable,
|
|
.set_suspend_disable = rk817_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk817_boost_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
|
|
.set_suspend_enable = rk817_set_suspend_enable,
|
|
.set_suspend_disable = rk817_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk817_buck_ops_range = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
|
|
.set_mode = rk8xx_set_mode,
|
|
.get_mode = rk8xx_get_mode,
|
|
.set_suspend_mode = rk8xx_set_suspend_mode,
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
.set_suspend_voltage = rk808_set_suspend_voltage_range,
|
|
.set_suspend_enable = rk817_set_suspend_enable,
|
|
.set_suspend_disable = rk817_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops rk817_switch_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
|
|
.set_suspend_enable = rk817_set_suspend_enable,
|
|
.set_suspend_disable = rk817_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_desc rk805_reg[] = {
|
|
{
|
|
.name = "DCDC_REG1",
|
|
.supply_name = "vcc1",
|
|
.of_match = of_match_ptr("DCDC_REG1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK805_ID_DCDC1,
|
|
.ops = &rk808_reg_ops_ranges,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 64,
|
|
.linear_ranges = rk805_buck_1_2_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
|
|
.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
|
|
.vsel_mask = RK818_BUCK_VSEL_MASK,
|
|
.enable_reg = RK805_DCDC_EN_REG,
|
|
.enable_mask = BIT(0),
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG2",
|
|
.supply_name = "vcc2",
|
|
.of_match = of_match_ptr("DCDC_REG2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK805_ID_DCDC2,
|
|
.ops = &rk808_reg_ops_ranges,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 64,
|
|
.linear_ranges = rk805_buck_1_2_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
|
|
.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
|
|
.vsel_mask = RK818_BUCK_VSEL_MASK,
|
|
.enable_reg = RK805_DCDC_EN_REG,
|
|
.enable_mask = BIT(1),
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG3",
|
|
.supply_name = "vcc3",
|
|
.of_match = of_match_ptr("DCDC_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK805_ID_DCDC3,
|
|
.ops = &rk805_switch_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.enable_reg = RK805_DCDC_EN_REG,
|
|
.enable_mask = BIT(2),
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
|
|
RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
|
|
RK805_DCDC_EN_REG, BIT(3), 0),
|
|
|
|
RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
|
|
RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
|
|
BIT(0), 400),
|
|
RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
|
|
RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
|
|
BIT(1), 400),
|
|
RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
|
|
RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
|
|
BIT(2), 400),
|
|
};
|
|
|
|
static const struct linear_range rk806_buck_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(500000, 0, 160, 6250), /* 500mV ~ 1500mV */
|
|
REGULATOR_LINEAR_RANGE(1500000, 161, 237, 25000), /* 1500mV ~ 3400mV */
|
|
REGULATOR_LINEAR_RANGE(3400000, 238, 255, 0),
|
|
};
|
|
|
|
static const struct linear_range rk806_ldo_voltage_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(500000, 0, 232, 12500), /* 500mV ~ 3400mV */
|
|
REGULATOR_LINEAR_RANGE(3400000, 233, 255, 0), /* 500mV ~ 3400mV */
|
|
};
|
|
|
|
static const struct regulator_desc rk806_reg[] = {
|
|
RK806_REGULATOR("dcdc-reg1", "vcc1", RK806_ID_DCDC1, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK1_ON_VSEL,
|
|
RK806_POWER_EN0, rk806_buck_voltage_ranges, 0,
|
|
RK806_BUCK1_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg2", "vcc2", RK806_ID_DCDC2, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK2_ON_VSEL,
|
|
RK806_POWER_EN0, rk806_buck_voltage_ranges, 1,
|
|
RK806_BUCK2_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg3", "vcc3", RK806_ID_DCDC3, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK3_ON_VSEL,
|
|
RK806_POWER_EN0, rk806_buck_voltage_ranges, 2,
|
|
RK806_BUCK3_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg4", "vcc4", RK806_ID_DCDC4, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK4_ON_VSEL,
|
|
RK806_POWER_EN0, rk806_buck_voltage_ranges, 3,
|
|
RK806_BUCK4_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
|
|
RK806_REGULATOR("dcdc-reg5", "vcc5", RK806_ID_DCDC5, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK5_ON_VSEL,
|
|
RK806_POWER_EN1, rk806_buck_voltage_ranges, 0,
|
|
RK806_BUCK5_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg6", "vcc6", RK806_ID_DCDC6, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK6_ON_VSEL,
|
|
RK806_POWER_EN1, rk806_buck_voltage_ranges, 1,
|
|
RK806_BUCK6_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg7", "vcc7", RK806_ID_DCDC7, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK7_ON_VSEL,
|
|
RK806_POWER_EN1, rk806_buck_voltage_ranges, 2,
|
|
RK806_BUCK7_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg8", "vcc8", RK806_ID_DCDC8, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK8_ON_VSEL,
|
|
RK806_POWER_EN1, rk806_buck_voltage_ranges, 3,
|
|
RK806_BUCK8_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
|
|
RK806_REGULATOR("dcdc-reg9", "vcc9", RK806_ID_DCDC9, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK9_ON_VSEL,
|
|
RK806_POWER_EN2, rk806_buck_voltage_ranges, 0,
|
|
RK806_BUCK9_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
RK806_REGULATOR("dcdc-reg10", "vcc10", RK806_ID_DCDC10, rk806_ops_dcdc,
|
|
RK806_BUCK_SEL_CNT, RK806_BUCK10_ON_VSEL,
|
|
RK806_POWER_EN2, rk806_buck_voltage_ranges, 1,
|
|
RK806_BUCK10_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
|
|
|
|
RK806_REGULATOR("nldo-reg1", "vcc13", RK806_ID_NLDO1, rk806_ops_nldo,
|
|
RK806_LDO_SEL_CNT, RK806_NLDO1_ON_VSEL,
|
|
RK806_POWER_EN3, rk806_ldo_voltage_ranges, 0,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
RK806_REGULATOR("nldo-reg2", "vcc13", RK806_ID_NLDO2, rk806_ops_nldo,
|
|
RK806_LDO_SEL_CNT, RK806_NLDO2_ON_VSEL,
|
|
RK806_POWER_EN3, rk806_ldo_voltage_ranges, 1,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
RK806_REGULATOR("nldo-reg3", "vcc13", RK806_ID_NLDO3, rk806_ops_nldo,
|
|
RK806_LDO_SEL_CNT, RK806_NLDO3_ON_VSEL,
|
|
RK806_POWER_EN3, rk806_ldo_voltage_ranges, 2,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
RK806_REGULATOR("nldo-reg4", "vcc14", RK806_ID_NLDO4, rk806_ops_nldo,
|
|
RK806_LDO_SEL_CNT, RK806_NLDO4_ON_VSEL,
|
|
RK806_POWER_EN3, rk806_ldo_voltage_ranges, 3,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
|
|
RK806_REGULATOR("nldo-reg5", "vcc14", RK806_ID_NLDO5, rk806_ops_nldo,
|
|
RK806_LDO_SEL_CNT, RK806_NLDO5_ON_VSEL,
|
|
RK806_POWER_EN5, rk806_ldo_voltage_ranges, 2,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
|
|
RK806_REGULATOR("pldo-reg1", "vcc11", RK806_ID_PLDO1, rk806_ops_pldo,
|
|
RK806_LDO_SEL_CNT, RK806_PLDO1_ON_VSEL,
|
|
RK806_POWER_EN4, rk806_ldo_voltage_ranges, 1,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
RK806_REGULATOR("pldo-reg2", "vcc11", RK806_ID_PLDO2, rk806_ops_pldo,
|
|
RK806_LDO_SEL_CNT, RK806_PLDO2_ON_VSEL,
|
|
RK806_POWER_EN4, rk806_ldo_voltage_ranges, 2,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
RK806_REGULATOR("pldo-reg3", "vcc11", RK806_ID_PLDO3, rk806_ops_pldo,
|
|
RK806_LDO_SEL_CNT, RK806_PLDO3_ON_VSEL,
|
|
RK806_POWER_EN4, rk806_ldo_voltage_ranges, 3,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
|
|
RK806_REGULATOR("pldo-reg4", "vcc12", RK806_ID_PLDO4, rk806_ops_pldo,
|
|
RK806_LDO_SEL_CNT, RK806_PLDO4_ON_VSEL,
|
|
RK806_POWER_EN5, rk806_ldo_voltage_ranges, 0,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
RK806_REGULATOR("pldo-reg5", "vcc12", RK806_ID_PLDO5, rk806_ops_pldo,
|
|
RK806_LDO_SEL_CNT, RK806_PLDO5_ON_VSEL,
|
|
RK806_POWER_EN5, rk806_ldo_voltage_ranges, 1,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
|
|
RK806_REGULATOR("pldo-reg6", "vcca", RK806_ID_PLDO6, rk806_ops_pldo,
|
|
RK806_LDO_SEL_CNT, RK806_PLDO6_ON_VSEL,
|
|
RK806_POWER_EN4, rk806_ldo_voltage_ranges, 0,
|
|
0xEA, 0x38, rk806_ramp_delay_table_ldo),
|
|
};
|
|
|
|
|
|
static const struct regulator_desc rk808_reg[] = {
|
|
{
|
|
.name = "DCDC_REG1",
|
|
.supply_name = "vcc1",
|
|
.of_match = of_match_ptr("DCDC_REG1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK808_ID_DCDC1,
|
|
.ops = &rk808_buck1_2_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.min_uV = 712500,
|
|
.uV_step = 12500,
|
|
.n_voltages = 64,
|
|
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
|
|
.vsel_mask = RK808_BUCK_VSEL_MASK,
|
|
.enable_reg = RK808_DCDC_EN_REG,
|
|
.enable_mask = BIT(0),
|
|
.ramp_reg = RK808_BUCK1_CONFIG_REG,
|
|
.ramp_mask = RK808_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk808_buck1_2_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table),
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG2",
|
|
.supply_name = "vcc2",
|
|
.of_match = of_match_ptr("DCDC_REG2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK808_ID_DCDC2,
|
|
.ops = &rk808_buck1_2_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.min_uV = 712500,
|
|
.uV_step = 12500,
|
|
.n_voltages = 64,
|
|
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
|
|
.vsel_mask = RK808_BUCK_VSEL_MASK,
|
|
.enable_reg = RK808_DCDC_EN_REG,
|
|
.enable_mask = BIT(1),
|
|
.ramp_reg = RK808_BUCK2_CONFIG_REG,
|
|
.ramp_mask = RK808_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk808_buck1_2_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table),
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG3",
|
|
.supply_name = "vcc3",
|
|
.of_match = of_match_ptr("DCDC_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK808_ID_DCDC3,
|
|
.ops = &rk808_switch_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.enable_reg = RK808_DCDC_EN_REG,
|
|
.enable_mask = BIT(2),
|
|
.owner = THIS_MODULE,
|
|
},
|
|
RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
|
|
RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
|
|
RK808_DCDC_EN_REG, BIT(3), 0),
|
|
RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
|
|
RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(0), 400),
|
|
RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
|
|
RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(1), 400),
|
|
{
|
|
.name = "LDO_REG3",
|
|
.supply_name = "vcc7",
|
|
.of_match = of_match_ptr("LDO_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK808_ID_LDO3,
|
|
.ops = &rk808_reg_ops_ranges,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 16,
|
|
.linear_ranges = rk808_ldo3_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
|
|
.vsel_reg = RK808_LDO3_ON_VSEL_REG,
|
|
.vsel_mask = RK808_BUCK4_VSEL_MASK,
|
|
.enable_reg = RK808_LDO_EN_REG,
|
|
.enable_mask = BIT(2),
|
|
.enable_time = 400,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
|
|
RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(3), 400),
|
|
RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
|
|
RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(4), 400),
|
|
RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
|
|
RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(5), 400),
|
|
RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
|
|
RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(6), 400),
|
|
RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
|
|
RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
|
|
BIT(7), 400),
|
|
RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
|
|
RK808_DCDC_EN_REG, BIT(5)),
|
|
RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
|
|
RK808_DCDC_EN_REG, BIT(6)),
|
|
};
|
|
|
|
static const struct regulator_desc rk809_reg[] = {
|
|
{
|
|
.name = "DCDC_REG1",
|
|
.supply_name = "vcc1",
|
|
.of_match = of_match_ptr("DCDC_REG1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC1,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck1_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK1_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG2",
|
|
.supply_name = "vcc2",
|
|
.of_match = of_match_ptr("DCDC_REG2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC2,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck1_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK2_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG3",
|
|
.supply_name = "vcc3",
|
|
.of_match = of_match_ptr("DCDC_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC3,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck1_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK3_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG4",
|
|
.supply_name = "vcc4",
|
|
.of_match = of_match_ptr("DCDC_REG4"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC4,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck3_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK4_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
{
|
|
.name = "DCDC_REG5",
|
|
.supply_name = "vcc9",
|
|
.of_match = of_match_ptr("DCDC_REG5"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK809_ID_DCDC5,
|
|
.ops = &rk809_buck5_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK809_BUCK5_SEL_CNT,
|
|
.linear_ranges = rk809_buck5_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
|
|
.vsel_reg = RK809_BUCK5_CONFIG(0),
|
|
.vsel_mask = RK809_BUCK5_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(3),
|
|
.enable_mask = ENABLE_MASK(1),
|
|
.enable_val = ENABLE_MASK(1),
|
|
.disable_val = DISABLE_VAL(1),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
|
|
DISABLE_VAL(0), 400),
|
|
RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
|
|
DISABLE_VAL(1), 400),
|
|
RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
|
|
DISABLE_VAL(2), 400),
|
|
RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
|
|
DISABLE_VAL(3), 400),
|
|
RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
|
|
DISABLE_VAL(0), 400),
|
|
RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
|
|
DISABLE_VAL(1), 400),
|
|
RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
|
|
DISABLE_VAL(2), 400),
|
|
RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
|
|
DISABLE_VAL(3), 400),
|
|
RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
|
|
DISABLE_VAL(0), 400),
|
|
RK817_DESC_SWITCH(RK809_ID_SW1, "SWITCH_REG1", "vcc9",
|
|
RK817_POWER_EN_REG(3), ENABLE_MASK(2),
|
|
DISABLE_VAL(2)),
|
|
RK817_DESC_SWITCH(RK809_ID_SW2, "SWITCH_REG2", "vcc8",
|
|
RK817_POWER_EN_REG(3), ENABLE_MASK(3),
|
|
DISABLE_VAL(3)),
|
|
};
|
|
|
|
static const struct regulator_desc rk817_reg[] = {
|
|
{
|
|
.name = "DCDC_REG1",
|
|
.supply_name = "vcc1",
|
|
.of_match = of_match_ptr("DCDC_REG1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC1,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck1_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK1_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG2",
|
|
.supply_name = "vcc2",
|
|
.of_match = of_match_ptr("DCDC_REG2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC2,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck1_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK2_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG3",
|
|
.supply_name = "vcc3",
|
|
.of_match = of_match_ptr("DCDC_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC3,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck1_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK3_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG4",
|
|
.supply_name = "vcc4",
|
|
.of_match = of_match_ptr("DCDC_REG4"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK817_ID_DCDC4,
|
|
.ops = &rk817_buck_ops_range,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
|
|
.linear_ranges = rk817_buck3_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
|
|
.vsel_reg = RK817_BUCK4_ON_VSEL_REG,
|
|
.vsel_mask = RK817_BUCK_VSEL_MASK,
|
|
.enable_reg = RK817_POWER_EN_REG(0),
|
|
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
|
|
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
|
|
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
|
|
.ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4),
|
|
.ramp_mask = RK817_RAMP_RATE_MASK,
|
|
.ramp_delay_table = rk817_buck1_4_ramp_table,
|
|
.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
|
|
.of_map_mode = rk8xx_regulator_of_map_mode,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
|
|
DISABLE_VAL(0), 400),
|
|
RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
|
|
DISABLE_VAL(1), 400),
|
|
RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
|
|
DISABLE_VAL(2), 400),
|
|
RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
|
|
DISABLE_VAL(3), 400),
|
|
RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
|
|
DISABLE_VAL(0), 400),
|
|
RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
|
|
DISABLE_VAL(1), 400),
|
|
RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
|
|
DISABLE_VAL(2), 400),
|
|
RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
|
|
DISABLE_VAL(3), 400),
|
|
RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
|
|
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
|
|
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
|
|
DISABLE_VAL(0), 400),
|
|
RK817_BOOST_DESC(RK817_ID_BOOST, "BOOST", "vcc8", 4700, 5400, 100,
|
|
RK817_BOOST_OTG_CFG, RK817_BOOST_VSEL_MASK,
|
|
RK817_POWER_EN_REG(3), ENABLE_MASK(1), ENABLE_MASK(1),
|
|
DISABLE_VAL(1), 400, 3500 - 5400),
|
|
RK817_DESC_SWITCH(RK817_ID_BOOST_OTG_SW, "OTG_SWITCH", "vcc9",
|
|
RK817_POWER_EN_REG(3), ENABLE_MASK(2),
|
|
DISABLE_VAL(2)),
|
|
};
|
|
|
|
static const struct regulator_desc rk818_reg[] = {
|
|
{
|
|
.name = "DCDC_REG1",
|
|
.supply_name = "vcc1",
|
|
.of_match = of_match_ptr("DCDC_REG1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK818_ID_DCDC1,
|
|
.ops = &rk808_reg_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.min_uV = 712500,
|
|
.uV_step = 12500,
|
|
.n_voltages = 64,
|
|
.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
|
|
.vsel_mask = RK818_BUCK_VSEL_MASK,
|
|
.enable_reg = RK818_DCDC_EN_REG,
|
|
.enable_mask = BIT(0),
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG2",
|
|
.supply_name = "vcc2",
|
|
.of_match = of_match_ptr("DCDC_REG2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK818_ID_DCDC2,
|
|
.ops = &rk808_reg_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.min_uV = 712500,
|
|
.uV_step = 12500,
|
|
.n_voltages = 64,
|
|
.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
|
|
.vsel_mask = RK818_BUCK_VSEL_MASK,
|
|
.enable_reg = RK818_DCDC_EN_REG,
|
|
.enable_mask = BIT(1),
|
|
.owner = THIS_MODULE,
|
|
}, {
|
|
.name = "DCDC_REG3",
|
|
.supply_name = "vcc3",
|
|
.of_match = of_match_ptr("DCDC_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK818_ID_DCDC3,
|
|
.ops = &rk808_switch_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.enable_reg = RK818_DCDC_EN_REG,
|
|
.enable_mask = BIT(2),
|
|
.owner = THIS_MODULE,
|
|
},
|
|
RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
|
|
RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
|
|
RK818_DCDC_EN_REG, BIT(3), 0),
|
|
RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
|
|
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
|
|
RK818_DCDC_EN_REG, BIT(4), 0),
|
|
RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
|
|
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(0), 400),
|
|
RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
|
|
RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(1), 400),
|
|
{
|
|
.name = "LDO_REG3",
|
|
.supply_name = "vcc7",
|
|
.of_match = of_match_ptr("LDO_REG3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RK818_ID_LDO3,
|
|
.ops = &rk808_reg_ops_ranges,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 16,
|
|
.linear_ranges = rk808_ldo3_voltage_ranges,
|
|
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
|
|
.vsel_reg = RK818_LDO3_ON_VSEL_REG,
|
|
.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
|
|
.enable_reg = RK818_LDO_EN_REG,
|
|
.enable_mask = BIT(2),
|
|
.enable_time = 400,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
|
|
RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(3), 400),
|
|
RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
|
|
RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(4), 400),
|
|
RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
|
|
RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(5), 400),
|
|
RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
|
|
RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(6), 400),
|
|
RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
|
|
RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
|
BIT(7), 400),
|
|
RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
|
|
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
|
|
RK818_DCDC_EN_REG, BIT(5), 400),
|
|
RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
|
|
RK818_DCDC_EN_REG, BIT(6)),
|
|
RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
|
|
RK818_H5V_EN_REG, BIT(0)),
|
|
RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
|
|
RK818_DCDC_EN_REG, BIT(7)),
|
|
};
|
|
|
|
static int rk808_regulator_dt_parse_pdata(struct device *dev,
|
|
struct regmap *map,
|
|
struct rk808_regulator_data *pdata)
|
|
{
|
|
struct device_node *np;
|
|
int tmp, ret = 0, i;
|
|
|
|
np = of_get_child_by_name(dev->of_node, "regulators");
|
|
if (!np)
|
|
return -ENXIO;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
|
|
pdata->dvs_gpio[i] =
|
|
devm_gpiod_get_index_optional(dev, "dvs", i,
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(pdata->dvs_gpio[i])) {
|
|
ret = PTR_ERR(pdata->dvs_gpio[i]);
|
|
dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
|
|
goto dt_parse_end;
|
|
}
|
|
|
|
if (!pdata->dvs_gpio[i]) {
|
|
dev_info(dev, "there is no dvs%d gpio\n", i);
|
|
continue;
|
|
}
|
|
|
|
tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
|
|
ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
|
|
gpiod_is_active_low(pdata->dvs_gpio[i]) ?
|
|
0 : tmp);
|
|
}
|
|
|
|
dt_parse_end:
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
|
|
static int rk808_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
|
|
struct regulator_config config = {};
|
|
struct regulator_dev *rk808_rdev;
|
|
struct rk808_regulator_data *pdata;
|
|
const struct regulator_desc *regulators;
|
|
struct regmap *regmap;
|
|
int ret, i, nregulators;
|
|
|
|
pdev->dev.of_node = pdev->dev.parent->of_node;
|
|
pdev->dev.of_node_reused = true;
|
|
|
|
regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!regmap)
|
|
return -ENODEV;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, regmap, pdata);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, pdata);
|
|
|
|
switch (rk808->variant) {
|
|
case RK805_ID:
|
|
regulators = rk805_reg;
|
|
nregulators = RK805_NUM_REGULATORS;
|
|
break;
|
|
case RK806_ID:
|
|
regulators = rk806_reg;
|
|
nregulators = ARRAY_SIZE(rk806_reg);
|
|
break;
|
|
case RK808_ID:
|
|
regulators = rk808_reg;
|
|
nregulators = RK808_NUM_REGULATORS;
|
|
break;
|
|
case RK809_ID:
|
|
regulators = rk809_reg;
|
|
nregulators = RK809_NUM_REGULATORS;
|
|
break;
|
|
case RK817_ID:
|
|
regulators = rk817_reg;
|
|
nregulators = RK817_NUM_REGULATORS;
|
|
break;
|
|
case RK818_ID:
|
|
regulators = rk818_reg;
|
|
nregulators = RK818_NUM_REGULATORS;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "unsupported RK8XX ID %lu\n",
|
|
rk808->variant);
|
|
return -EINVAL;
|
|
}
|
|
|
|
config.dev = &pdev->dev;
|
|
config.driver_data = pdata;
|
|
config.regmap = regmap;
|
|
|
|
/* Instantiate the regulators */
|
|
for (i = 0; i < nregulators; i++) {
|
|
rk808_rdev = devm_regulator_register(&pdev->dev,
|
|
®ulators[i], &config);
|
|
if (IS_ERR(rk808_rdev))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(rk808_rdev),
|
|
"failed to register %d regulator\n", i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rk808_regulator_driver = {
|
|
.probe = rk808_regulator_probe,
|
|
.driver = {
|
|
.name = "rk808-regulator",
|
|
.probe_type = PROBE_FORCE_SYNCHRONOUS,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(rk808_regulator_driver);
|
|
|
|
MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
|
|
MODULE_AUTHOR("Tony xie <tony.xie@rock-chips.com>");
|
|
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
|
|
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
|
|
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
|
|
MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:rk808-regulator");
|