linux/arch/arm/boot/dts/spear310-evb.dts
Thomas Gleixner fcaf20360a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159
Based on 1 normalized pattern(s):

  the code contained herein is licensed under the gnu general public
  license you may obtain a copy of the gnu general public license
  version 2 or later at the following locations http www opensource
  org licenses gpl license html http www gnu org copyleft gpl html

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 161 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00

203 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* DTS file for SPEAr310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*/
/dts-v1/;
/include/ "spear310.dtsi"
/ {
model = "ST SPEAr310 Evaluation Board";
compatible = "st,spear310-evb", "st,spear310";
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0 0x40000000>;
};
ahb {
pinmux@b4000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
gpio0 {
st,pins = "gpio0_pin0_grp",
"gpio0_pin1_grp",
"gpio0_pin2_grp",
"gpio0_pin3_grp",
"gpio0_pin4_grp",
"gpio0_pin5_grp";
st,function = "gpio0";
};
i2c0 {
st,pins = "i2c0_grp";
st,function = "i2c0";
};
mii0 {
st,pins = "mii0_grp";
st,function = "mii0";
};
ssp0 {
st,pins = "ssp0_grp";
st,function = "ssp0";
};
uart0 {
st,pins = "uart0_grp";
st,function = "uart0";
};
emi {
st,pins = "emi_cs_0_to_5_grp";
st,function = "emi";
};
fsmc {
st,pins = "fsmc_grp";
st,function = "fsmc";
};
uart1 {
st,pins = "uart1_grp";
st,function = "uart1";
};
uart2 {
st,pins = "uart2_grp";
st,function = "uart2";
};
uart3 {
st,pins = "uart3_grp";
st,function = "uart3";
};
uart4 {
st,pins = "uart4_grp";
st,function = "uart4";
};
uart5 {
st,pins = "uart5_grp";
st,function = "uart5";
};
};
};
dma@fc400000 {
status = "okay";
};
fsmc: flash@44000000 {
status = "okay";
};
gmac: eth@e0800000 {
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
flash@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf8000000 0x800000>;
st,smi-fast-mode;
partition@0 {
label = "xloader";
reg = <0x0 0x10000>;
};
partition@10000 {
label = "u-boot";
reg = <0x10000 0x50000>;
};
partition@60000 {
label = "environment";
reg = <0x60000 0x10000>;
};
partition@70000 {
label = "dtb";
reg = <0x70000 0x10000>;
};
partition@80000 {
label = "linux";
reg = <0x80000 0x310000>;
};
partition@390000 {
label = "rootfs";
reg = <0x390000 0x0>;
};
};
};
spi0: spi@d0100000 {
status = "okay";
};
ehci@e1800000 {
status = "okay";
};
ohci@e1900000 {
status = "okay";
};
ohci@e2100000 {
status = "okay";
};
apb {
gpio0: gpio@fc980000 {
status = "okay";
};
i2c0: i2c@d0180000 {
status = "okay";
};
rtc@fc900000 {
status = "okay";
};
serial@d0000000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
serial@b2000000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
serial@b2080000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
serial@b2100000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
serial@b2180000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
serial@b2200000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
};
wdt@fc880000 {
status = "okay";
};
};
};
};