mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 08:34:20 +08:00
c29a7cced1
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
624 lines
15 KiB
Plaintext
624 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 375 family SoC
|
|
*
|
|
* Copyright (C) 2014 Marvell
|
|
*
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
model = "Marvell Armada 375 family SoC";
|
|
compatible = "marvell,armada375";
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
clocks {
|
|
/* 1 GHz fixed main PLL */
|
|
mainpll: mainpll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000000>;
|
|
};
|
|
/* 25 MHz reference crystal */
|
|
refclk: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "marvell,armada-375-smp";
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
};
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts-extended = <&mpic 3>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "marvell,armada375-mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
interrupt-parent = <&gic>;
|
|
pcie-mem-aperture = <0xe0000000 0x8000000>;
|
|
pcie-io-aperture = <0xe8000000 0x100000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
|
|
};
|
|
|
|
devbus_bootcs: devbus-bootcs {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs0: devbus-cs0 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs1: devbus-cs1 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs2: devbus-cs2 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs3: devbus-cs3 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
L2: cache-controller@8000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x8000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
arm,double-linefill-incr = <0>;
|
|
arm,double-linefill-wrap = <0>;
|
|
arm,double-linefill = <0>;
|
|
prefetch-data = <1>;
|
|
};
|
|
|
|
scu: scu@c000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xc000 0x58>;
|
|
};
|
|
|
|
timer0: timer@c600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xc600 0x20>;
|
|
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
|
|
clocks = <&coreclk 2>;
|
|
};
|
|
|
|
gic: interrupt-controller@d000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0xd000 0x1000>,
|
|
<0xc100 0x100>;
|
|
};
|
|
|
|
mdio: mdio@c0054 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,orion-mdio";
|
|
reg = <0xc0054 0x4>;
|
|
clocks = <&gateclk 19>;
|
|
};
|
|
|
|
/* Network controller */
|
|
ethernet: ethernet@f0000 {
|
|
compatible = "marvell,armada-375-pp2";
|
|
reg = <0xf0000 0xa000>, /* Packet Processor regs */
|
|
<0xc0000 0x3060>, /* LMS regs */
|
|
<0xc4000 0x100>, /* eth0 regs */
|
|
<0xc5000 0x100>; /* eth1 regs */
|
|
clocks = <&gateclk 3>, <&gateclk 19>;
|
|
clock-names = "pp_clk", "gop_clk";
|
|
status = "disabled";
|
|
|
|
eth0: eth0 {
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
port-id = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth1: eth1 {
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
port-id = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
rtc: rtc@10300 {
|
|
compatible = "marvell,orion-rtc";
|
|
reg = <0x10300 0x20>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
compatible = "marvell,armada-375-spi",
|
|
"marvell,orion-spi";
|
|
reg = <0x10600 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
compatible = "marvell,armada-375-spi",
|
|
"marvell,orion-spi";
|
|
reg = <0x10680 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11100 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11100 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pinctrl@18000 {
|
|
compatible = "marvell,mv88f6720-pinctrl";
|
|
reg = <0x18000 0x24>;
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
marvell,pins = "mpp14", "mpp15";
|
|
marvell,function = "i2c0";
|
|
};
|
|
|
|
i2c1_pins: i2c1-pins {
|
|
marvell,pins = "mpp61", "mpp62";
|
|
marvell,function = "i2c1";
|
|
};
|
|
|
|
nand_pins: nand-pins {
|
|
marvell,pins = "mpp0", "mpp1", "mpp2",
|
|
"mpp3", "mpp4", "mpp5",
|
|
"mpp6", "mpp7", "mpp8",
|
|
"mpp9", "mpp10", "mpp11",
|
|
"mpp12", "mpp13";
|
|
marvell,function = "nand";
|
|
};
|
|
|
|
sdio_pins: sdio-pins {
|
|
marvell,pins = "mpp24", "mpp25", "mpp26",
|
|
"mpp27", "mpp28", "mpp29";
|
|
marvell,function = "sd";
|
|
};
|
|
|
|
spi0_pins: spi0-pins {
|
|
marvell,pins = "mpp0", "mpp1", "mpp4",
|
|
"mpp5", "mpp8", "mpp9";
|
|
marvell,function = "spi0";
|
|
};
|
|
};
|
|
|
|
gpio0: gpio@18100 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18100 0x40>;
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
gpio1: gpio@18140 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18140 0x40>;
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
gpio2: gpio@18180 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x18180 0x40>;
|
|
ngpios = <3>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
systemc: system-controller@18200 {
|
|
compatible = "marvell,armada-375-system-controller";
|
|
reg = <0x18200 0x100>;
|
|
};
|
|
|
|
gateclk: clock-gating-control@18220 {
|
|
compatible = "marvell,armada-375-gating-clock";
|
|
reg = <0x18220 0x4>;
|
|
clocks = <&coreclk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
usbcluster: usb-cluster@18400 {
|
|
compatible = "marvell,armada-375-usb-cluster";
|
|
reg = <0x18400 0x4>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>;
|
|
};
|
|
|
|
mpic: interrupt-controller@20a00 {
|
|
compatible = "marvell,mpic";
|
|
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
msi-controller;
|
|
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer1: timer@20300 {
|
|
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
|
|
reg = <0x20300 0x30>, <0x21040 0x30>;
|
|
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&mpic 5>,
|
|
<&mpic 6>;
|
|
clocks = <&coreclk 0>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
watchdog: watchdog@20300 {
|
|
compatible = "marvell,armada-375-wdt";
|
|
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
|
|
clocks = <&coreclk 0>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
cpurst: cpurst@20800 {
|
|
compatible = "marvell,armada-370-cpu-reset";
|
|
reg = <0x20800 0x10>;
|
|
};
|
|
|
|
coherencyfab: coherency-fabric@21010 {
|
|
compatible = "marvell,armada-375-coherency-fabric";
|
|
reg = <0x21010 0x1c>;
|
|
};
|
|
|
|
usb0: usb@50000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x50000 0x500>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 18>;
|
|
phys = <&usbcluster PHY_TYPE_USB2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@54000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x54000 0x500>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 26>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2: usb3@58000 {
|
|
compatible = "marvell,armada-375-xhci";
|
|
reg = <0x58000 0x20000>,<0x5b880 0x80>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 16>;
|
|
phys = <&usbcluster PHY_TYPE_USB3>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
xor0: xor@60800 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60800 0x100
|
|
0x60A00 0x100>;
|
|
clocks = <&gateclk 22>;
|
|
status = "okay";
|
|
|
|
xor00 {
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
xor1: xor@60900 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60900 0x100
|
|
0x60b00 0x100>;
|
|
clocks = <&gateclk 23>;
|
|
status = "okay";
|
|
|
|
xor10 {
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor11 {
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
cesa: crypto@90000 {
|
|
compatible = "marvell,armada-375-crypto";
|
|
reg = <0x90000 0x10000>;
|
|
reg-names = "regs";
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 30>, <&gateclk 31>,
|
|
<&gateclk 28>, <&gateclk 29>;
|
|
clock-names = "cesa0", "cesa1",
|
|
"cesaz0", "cesaz1";
|
|
marvell,crypto-srams = <&crypto_sram0>,
|
|
<&crypto_sram1>;
|
|
marvell,crypto-sram-size = <0x800>;
|
|
};
|
|
|
|
sata: sata@a0000 {
|
|
compatible = "marvell,armada-370-sata";
|
|
reg = <0xa0000 0x5000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 14>, <&gateclk 20>;
|
|
clock-names = "0", "1";
|
|
status = "disabled";
|
|
};
|
|
|
|
nand_controller: nand-controller@d0000 {
|
|
compatible = "marvell,armada370-nand-controller";
|
|
reg = <0xd0000 0x54>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 11>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdio: mvsdio@d4000 {
|
|
compatible = "marvell,orion-sdio";
|
|
reg = <0xd4000 0x200>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 17>;
|
|
bus-width = <4>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
status = "disabled";
|
|
};
|
|
|
|
thermal: thermal@e8078 {
|
|
compatible = "marvell,armada375-thermal";
|
|
reg = <0xe8078 0x4>, <0xe807c 0x8>;
|
|
status = "okay";
|
|
};
|
|
|
|
coreclk: mvebu-sar@e8204 {
|
|
compatible = "marvell,armada-375-core-clock";
|
|
reg = <0xe8204 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
coredivclk: corediv-clock@e8250 {
|
|
compatible = "marvell,armada-375-corediv-clock";
|
|
reg = <0xe8250 0xc>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mainpll>;
|
|
clock-output-names = "nand";
|
|
};
|
|
};
|
|
|
|
pciec: pcie@82000000 {
|
|
compatible = "marvell,armada-370-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
msi-parent = <&mpic>;
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
|
|
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
|
|
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
|
|
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO */
|
|
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
|
|
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
|
|
|
|
pcie0: pcie@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 5>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
|
|
reg = <0x1000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
|
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <1>;
|
|
clocks = <&gateclk 6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
};
|
|
|
|
crypto_sram0: sa-sram0 {
|
|
compatible = "mmio-sram";
|
|
reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
|
|
clocks = <&gateclk 30>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
|
|
};
|
|
|
|
crypto_sram1: sa-sram1 {
|
|
compatible = "mmio-sram";
|
|
reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
|
|
clocks = <&gateclk 31>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
|
|
};
|
|
};
|
|
};
|