mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
f712e24c0b
DMA masks given in the Zorro ID table don't contain the 2 byte alignment
quirk seen in the GVP11_XFER_MASK macro from gvp11.h so no need to account
for that.
DMA masks passed to dma_set_mask_and_coherent() must be 64 bit, add the
missing cast in the TO_DMA_MASK macro used to convert driver DMA masks to
DMA API masks.
Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com
Link: https://lore.kernel.org/r/20220713074913.7873-1-schmitzmic@gmail.com
Fixes: 158da6bcae
("scsi: gvp11: Convert m68k WD33C93 drivers to DMA API")
CC: linux-scsi@vger.kernel.org
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
482 lines
12 KiB
C
482 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/zorro.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/amigaints.h>
|
|
#include <asm/amigahw.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_eh.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include "wd33c93.h"
|
|
#include "gvp11.h"
|
|
|
|
|
|
#define CHECK_WD33C93
|
|
|
|
struct gvp11_hostdata {
|
|
struct WD33C93_hostdata wh;
|
|
struct gvp11_scsiregs *regs;
|
|
struct device *dev;
|
|
};
|
|
|
|
#define DMA_DIR(d) ((d == DATA_OUT_DIR) ? DMA_TO_DEVICE : DMA_FROM_DEVICE)
|
|
#define TO_DMA_MASK(m) (~((unsigned long long)m & 0xffffffff))
|
|
|
|
static irqreturn_t gvp11_intr(int irq, void *data)
|
|
{
|
|
struct Scsi_Host *instance = data;
|
|
struct gvp11_hostdata *hdata = shost_priv(instance);
|
|
unsigned int status = hdata->regs->CNTR;
|
|
unsigned long flags;
|
|
|
|
if (!(status & GVP11_DMAC_INT_PENDING))
|
|
return IRQ_NONE;
|
|
|
|
spin_lock_irqsave(instance->host_lock, flags);
|
|
wd33c93_intr(instance);
|
|
spin_unlock_irqrestore(instance->host_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int gvp11_xfer_mask = 0;
|
|
|
|
void gvp11_setup(char *str, int *ints)
|
|
{
|
|
gvp11_xfer_mask = ints[1];
|
|
}
|
|
|
|
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
|
|
{
|
|
struct scsi_pointer *scsi_pointer = WD33C93_scsi_pointer(cmd);
|
|
unsigned long len = scsi_pointer->this_residual;
|
|
struct Scsi_Host *instance = cmd->device->host;
|
|
struct gvp11_hostdata *hdata = shost_priv(instance);
|
|
struct WD33C93_hostdata *wh = &hdata->wh;
|
|
struct gvp11_scsiregs *regs = hdata->regs;
|
|
unsigned short cntr = GVP11_DMAC_INT_ENABLE;
|
|
dma_addr_t addr;
|
|
int bank_mask;
|
|
static int scsi_alloc_out_of_range = 0;
|
|
|
|
addr = dma_map_single(hdata->dev, scsi_pointer->ptr,
|
|
len, DMA_DIR(dir_in));
|
|
if (dma_mapping_error(hdata->dev, addr)) {
|
|
dev_warn(hdata->dev, "cannot map SCSI data block %p\n",
|
|
scsi_pointer->ptr);
|
|
return 1;
|
|
}
|
|
scsi_pointer->dma_handle = addr;
|
|
|
|
/* use bounce buffer if the physical address is bad */
|
|
if (addr & wh->dma_xfer_mask) {
|
|
/* drop useless mapping */
|
|
dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
|
|
scsi_pointer->this_residual,
|
|
DMA_DIR(dir_in));
|
|
scsi_pointer->dma_handle = (dma_addr_t) NULL;
|
|
|
|
wh->dma_bounce_len = (scsi_pointer->this_residual + 511) & ~0x1ff;
|
|
|
|
if (!scsi_alloc_out_of_range) {
|
|
wh->dma_bounce_buffer =
|
|
kmalloc(wh->dma_bounce_len, GFP_KERNEL);
|
|
wh->dma_buffer_pool = BUF_SCSI_ALLOCED;
|
|
}
|
|
|
|
if (scsi_alloc_out_of_range ||
|
|
!wh->dma_bounce_buffer) {
|
|
wh->dma_bounce_buffer =
|
|
amiga_chip_alloc(wh->dma_bounce_len,
|
|
"GVP II SCSI Bounce Buffer");
|
|
|
|
if (!wh->dma_bounce_buffer) {
|
|
wh->dma_bounce_len = 0;
|
|
return 1;
|
|
}
|
|
|
|
wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
|
|
}
|
|
|
|
if (!dir_in) {
|
|
/* copy to bounce buffer for a write */
|
|
memcpy(wh->dma_bounce_buffer, scsi_pointer->ptr,
|
|
scsi_pointer->this_residual);
|
|
}
|
|
|
|
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED) {
|
|
/* will flush/invalidate cache for us */
|
|
addr = dma_map_single(hdata->dev,
|
|
wh->dma_bounce_buffer,
|
|
wh->dma_bounce_len,
|
|
DMA_DIR(dir_in));
|
|
/* can't map buffer; use PIO */
|
|
if (dma_mapping_error(hdata->dev, addr)) {
|
|
dev_warn(hdata->dev,
|
|
"cannot map bounce buffer %p\n",
|
|
wh->dma_bounce_buffer);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
if (addr & wh->dma_xfer_mask) {
|
|
/* drop useless mapping */
|
|
dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
|
|
scsi_pointer->this_residual,
|
|
DMA_DIR(dir_in));
|
|
/* fall back to Chip RAM if address out of range */
|
|
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED) {
|
|
kfree(wh->dma_bounce_buffer);
|
|
scsi_alloc_out_of_range = 1;
|
|
} else {
|
|
amiga_chip_free(wh->dma_bounce_buffer);
|
|
}
|
|
|
|
wh->dma_bounce_buffer =
|
|
amiga_chip_alloc(wh->dma_bounce_len,
|
|
"GVP II SCSI Bounce Buffer");
|
|
|
|
if (!wh->dma_bounce_buffer) {
|
|
wh->dma_bounce_len = 0;
|
|
return 1;
|
|
}
|
|
|
|
if (!dir_in) {
|
|
/* copy to bounce buffer for a write */
|
|
memcpy(wh->dma_bounce_buffer, scsi_pointer->ptr,
|
|
scsi_pointer->this_residual);
|
|
}
|
|
/* chip RAM can be mapped to phys. address directly */
|
|
addr = virt_to_phys(wh->dma_bounce_buffer);
|
|
/* no need to flush/invalidate cache */
|
|
wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
|
|
}
|
|
/* finally, have OK mapping (punted for PIO else) */
|
|
scsi_pointer->dma_handle = addr;
|
|
|
|
}
|
|
|
|
/* setup dma direction */
|
|
if (!dir_in)
|
|
cntr |= GVP11_DMAC_DIR_WRITE;
|
|
|
|
wh->dma_dir = dir_in;
|
|
regs->CNTR = cntr;
|
|
|
|
/* setup DMA *physical* address */
|
|
regs->ACR = addr;
|
|
|
|
/* no more cache flush here - dma_map_single() takes care */
|
|
|
|
bank_mask = (~wh->dma_xfer_mask >> 18) & 0x01c0;
|
|
if (bank_mask)
|
|
regs->BANK = bank_mask & (addr >> 18);
|
|
|
|
/* start DMA */
|
|
regs->ST_DMA = 1;
|
|
|
|
/* return success */
|
|
return 0;
|
|
}
|
|
|
|
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
|
|
int status)
|
|
{
|
|
struct scsi_pointer *scsi_pointer = WD33C93_scsi_pointer(SCpnt);
|
|
struct gvp11_hostdata *hdata = shost_priv(instance);
|
|
struct WD33C93_hostdata *wh = &hdata->wh;
|
|
struct gvp11_scsiregs *regs = hdata->regs;
|
|
|
|
/* stop DMA */
|
|
regs->SP_DMA = 1;
|
|
/* remove write bit from CONTROL bits */
|
|
regs->CNTR = GVP11_DMAC_INT_ENABLE;
|
|
|
|
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED)
|
|
dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
|
|
scsi_pointer->this_residual,
|
|
DMA_DIR(wh->dma_dir));
|
|
|
|
/* copy from a bounce buffer, if necessary */
|
|
if (status && wh->dma_bounce_buffer) {
|
|
if (wh->dma_dir && SCpnt)
|
|
memcpy(scsi_pointer->ptr, wh->dma_bounce_buffer,
|
|
scsi_pointer->this_residual);
|
|
|
|
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED)
|
|
kfree(wh->dma_bounce_buffer);
|
|
else
|
|
amiga_chip_free(wh->dma_bounce_buffer);
|
|
|
|
wh->dma_bounce_buffer = NULL;
|
|
wh->dma_bounce_len = 0;
|
|
}
|
|
}
|
|
|
|
static struct scsi_host_template gvp11_scsi_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "GVP Series II SCSI",
|
|
.show_info = wd33c93_show_info,
|
|
.write_info = wd33c93_write_info,
|
|
.proc_name = "GVP11",
|
|
.queuecommand = wd33c93_queuecommand,
|
|
.eh_abort_handler = wd33c93_abort,
|
|
.eh_host_reset_handler = wd33c93_host_reset,
|
|
.can_queue = CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = CMD_PER_LUN,
|
|
.dma_boundary = PAGE_SIZE - 1,
|
|
.cmd_size = sizeof(struct scsi_pointer),
|
|
};
|
|
|
|
static int check_wd33c93(struct gvp11_scsiregs *regs)
|
|
{
|
|
#ifdef CHECK_WD33C93
|
|
volatile unsigned char *sasr_3393, *scmd_3393;
|
|
unsigned char save_sasr;
|
|
unsigned char q, qq;
|
|
|
|
/*
|
|
* These darn GVP boards are a problem - it can be tough to tell
|
|
* whether or not they include a SCSI controller. This is the
|
|
* ultimate Yet-Another-GVP-Detection-Hack in that it actually
|
|
* probes for a WD33c93 chip: If we find one, it's extremely
|
|
* likely that this card supports SCSI, regardless of Product_
|
|
* Code, Board_Size, etc.
|
|
*/
|
|
|
|
/* Get pointers to the presumed register locations and save contents */
|
|
|
|
sasr_3393 = ®s->SASR;
|
|
scmd_3393 = ®s->SCMD;
|
|
save_sasr = *sasr_3393;
|
|
|
|
/* First test the AuxStatus Reg */
|
|
|
|
q = *sasr_3393; /* read it */
|
|
if (q & 0x08) /* bit 3 should always be clear */
|
|
return -ENODEV;
|
|
*sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
|
|
if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
|
|
*sasr_3393 = save_sasr; /* Oops - restore this byte */
|
|
return -ENODEV;
|
|
}
|
|
if (*sasr_3393 != q) { /* should still read the same */
|
|
*sasr_3393 = save_sasr; /* Oops - restore this byte */
|
|
return -ENODEV;
|
|
}
|
|
if (*scmd_3393 != q) /* and so should the image at 0x1f */
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Ok, we probably have a wd33c93, but let's check a few other places
|
|
* for good measure. Make sure that this works for both 'A and 'B
|
|
* chip versions.
|
|
*/
|
|
|
|
*sasr_3393 = WD_SCSI_STATUS;
|
|
q = *scmd_3393;
|
|
*sasr_3393 = WD_SCSI_STATUS;
|
|
*scmd_3393 = ~q;
|
|
*sasr_3393 = WD_SCSI_STATUS;
|
|
qq = *scmd_3393;
|
|
*sasr_3393 = WD_SCSI_STATUS;
|
|
*scmd_3393 = q;
|
|
if (qq != q) /* should be read only */
|
|
return -ENODEV;
|
|
*sasr_3393 = 0x1e; /* this register is unimplemented */
|
|
q = *scmd_3393;
|
|
*sasr_3393 = 0x1e;
|
|
*scmd_3393 = ~q;
|
|
*sasr_3393 = 0x1e;
|
|
qq = *scmd_3393;
|
|
*sasr_3393 = 0x1e;
|
|
*scmd_3393 = q;
|
|
if (qq != q || qq != 0xff) /* should be read only, all 1's */
|
|
return -ENODEV;
|
|
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
|
q = *scmd_3393;
|
|
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
|
*scmd_3393 = ~q;
|
|
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
|
qq = *scmd_3393;
|
|
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
|
*scmd_3393 = q;
|
|
if (qq != (~q & 0xff)) /* should be read/write */
|
|
return -ENODEV;
|
|
#endif /* CHECK_WD33C93 */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gvp11_probe(struct zorro_dev *z, const struct zorro_device_id *ent)
|
|
{
|
|
struct Scsi_Host *instance;
|
|
unsigned long address;
|
|
int error;
|
|
unsigned int epc;
|
|
unsigned int default_dma_xfer_mask;
|
|
struct gvp11_hostdata *hdata;
|
|
struct gvp11_scsiregs *regs;
|
|
wd33c93_regs wdregs;
|
|
|
|
default_dma_xfer_mask = ent->driver_data;
|
|
|
|
if (dma_set_mask_and_coherent(&z->dev,
|
|
TO_DMA_MASK(default_dma_xfer_mask))) {
|
|
dev_warn(&z->dev, "cannot use DMA mask %llx\n",
|
|
TO_DMA_MASK(default_dma_xfer_mask));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Rumors state that some GVP ram boards use the same product
|
|
* code as the SCSI controllers. Therefore if the board-size
|
|
* is not 64KB we assume it is a ram board and bail out.
|
|
*/
|
|
if (zorro_resource_len(z) != 0x10000)
|
|
return -ENODEV;
|
|
|
|
address = z->resource.start;
|
|
if (!request_mem_region(address, 256, "wd33c93"))
|
|
return -EBUSY;
|
|
|
|
regs = ZTWO_VADDR(address);
|
|
|
|
error = check_wd33c93(regs);
|
|
if (error)
|
|
goto fail_check_or_alloc;
|
|
|
|
instance = scsi_host_alloc(&gvp11_scsi_template,
|
|
sizeof(struct gvp11_hostdata));
|
|
if (!instance) {
|
|
error = -ENOMEM;
|
|
goto fail_check_or_alloc;
|
|
}
|
|
|
|
instance->irq = IRQ_AMIGA_PORTS;
|
|
instance->unique_id = z->slotaddr;
|
|
|
|
regs->secret2 = 1;
|
|
regs->secret1 = 0;
|
|
regs->secret3 = 15;
|
|
while (regs->CNTR & GVP11_DMAC_BUSY)
|
|
;
|
|
regs->CNTR = 0;
|
|
regs->BANK = 0;
|
|
|
|
wdregs.SASR = ®s->SASR;
|
|
wdregs.SCMD = ®s->SCMD;
|
|
|
|
hdata = shost_priv(instance);
|
|
if (gvp11_xfer_mask) {
|
|
hdata->wh.dma_xfer_mask = gvp11_xfer_mask;
|
|
if (dma_set_mask_and_coherent(&z->dev,
|
|
TO_DMA_MASK(gvp11_xfer_mask))) {
|
|
dev_warn(&z->dev, "cannot use DMA mask %llx\n",
|
|
TO_DMA_MASK(gvp11_xfer_mask));
|
|
error = -ENODEV;
|
|
goto fail_check_or_alloc;
|
|
}
|
|
} else
|
|
hdata->wh.dma_xfer_mask = default_dma_xfer_mask;
|
|
|
|
hdata->wh.no_sync = 0xff;
|
|
hdata->wh.fast = 0;
|
|
hdata->wh.dma_mode = CTRL_DMA;
|
|
hdata->regs = regs;
|
|
|
|
/*
|
|
* Check for 14MHz SCSI clock
|
|
*/
|
|
epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
|
|
wd33c93_init(instance, wdregs, dma_setup, dma_stop,
|
|
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
|
|
: WD33C93_FS_12_15);
|
|
|
|
error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
|
|
"GVP11 SCSI", instance);
|
|
if (error)
|
|
goto fail_irq;
|
|
|
|
regs->CNTR = GVP11_DMAC_INT_ENABLE;
|
|
|
|
error = scsi_add_host(instance, NULL);
|
|
if (error)
|
|
goto fail_host;
|
|
|
|
zorro_set_drvdata(z, instance);
|
|
scsi_scan_host(instance);
|
|
return 0;
|
|
|
|
fail_host:
|
|
free_irq(IRQ_AMIGA_PORTS, instance);
|
|
fail_irq:
|
|
scsi_host_put(instance);
|
|
fail_check_or_alloc:
|
|
release_mem_region(address, 256);
|
|
return error;
|
|
}
|
|
|
|
static void gvp11_remove(struct zorro_dev *z)
|
|
{
|
|
struct Scsi_Host *instance = zorro_get_drvdata(z);
|
|
struct gvp11_hostdata *hdata = shost_priv(instance);
|
|
|
|
hdata->regs->CNTR = 0;
|
|
scsi_remove_host(instance);
|
|
free_irq(IRQ_AMIGA_PORTS, instance);
|
|
scsi_host_put(instance);
|
|
release_mem_region(z->resource.start, 256);
|
|
}
|
|
|
|
/*
|
|
* This should (hopefully) be the correct way to identify
|
|
* all the different GVP SCSI controllers (except for the
|
|
* SERIES I though).
|
|
*/
|
|
|
|
static struct zorro_device_id gvp11_zorro_tbl[] = {
|
|
{ ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff },
|
|
{ ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff },
|
|
{ ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff },
|
|
{ ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff },
|
|
{ ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff },
|
|
{ ZORRO_PROD_GVP_A1291, ~0x07ffffff },
|
|
{ ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff },
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl);
|
|
|
|
static struct zorro_driver gvp11_driver = {
|
|
.name = "gvp11",
|
|
.id_table = gvp11_zorro_tbl,
|
|
.probe = gvp11_probe,
|
|
.remove = gvp11_remove,
|
|
};
|
|
|
|
static int __init gvp11_init(void)
|
|
{
|
|
return zorro_register_driver(&gvp11_driver);
|
|
}
|
|
module_init(gvp11_init);
|
|
|
|
static void __exit gvp11_exit(void)
|
|
{
|
|
zorro_unregister_driver(&gvp11_driver);
|
|
}
|
|
module_exit(gvp11_exit);
|
|
|
|
MODULE_DESCRIPTION("GVP Series II SCSI");
|
|
MODULE_LICENSE("GPL");
|