Jean-Jacques Hiblot 87cb12910a ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. ... AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> [tony@atomide.com: updated comments with what goes wrong] Signed-off-by: Tony Lindgren <tony@atomide.com>		2017-01-13 09:16:52 -08:00
..
bootp
compressed	ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7	2016-10-02 20:05:14 +01:00
dts	ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.	2017-01-13 09:16:52 -08:00
.gitignore
install.sh
Makefile	ARM: 8588/1: localise objcopy flags	2016-08-12 16:47:01 +01:00