mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
6f3a9b1003
Fix 'enable' gpio control logic from the below cases if it's specified. 1. All off and both are sequentially controlled to be on. The 'enable' gpio control block to be called twice including the delay time. 2. Both are on and one is preparing to be off. The 'enable' gpio control low before register cache is configured to be true. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1631629249-9998-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
290 lines
7.5 KiB
C
290 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
|
|
enum {
|
|
RTQ6752_IDX_PAVDD = 0,
|
|
RTQ6752_IDX_NAVDD = 1,
|
|
RTQ6752_IDX_MAX
|
|
};
|
|
|
|
#define RTQ6752_REG_PAVDD 0x00
|
|
#define RTQ6752_REG_NAVDD 0x01
|
|
#define RTQ6752_REG_PAVDDONDLY 0x07
|
|
#define RTQ6752_REG_PAVDDSSTIME 0x08
|
|
#define RTQ6752_REG_NAVDDONDLY 0x0D
|
|
#define RTQ6752_REG_NAVDDSSTIME 0x0E
|
|
#define RTQ6752_REG_OPTION1 0x12
|
|
#define RTQ6752_REG_CHSWITCH 0x16
|
|
#define RTQ6752_REG_FAULT 0x1D
|
|
|
|
#define RTQ6752_VOUT_MASK GENMASK(5, 0)
|
|
#define RTQ6752_NAVDDEN_MASK BIT(3)
|
|
#define RTQ6752_PAVDDEN_MASK BIT(0)
|
|
#define RTQ6752_PAVDDAD_MASK BIT(4)
|
|
#define RTQ6752_NAVDDAD_MASK BIT(3)
|
|
#define RTQ6752_PAVDDF_MASK BIT(3)
|
|
#define RTQ6752_NAVDDF_MASK BIT(0)
|
|
#define RTQ6752_ENABLE_MASK (BIT(RTQ6752_IDX_MAX) - 1)
|
|
|
|
#define RTQ6752_VOUT_MINUV 5000000
|
|
#define RTQ6752_VOUT_STEPUV 50000
|
|
#define RTQ6752_VOUT_NUM 47
|
|
#define RTQ6752_I2CRDY_TIMEUS 1000
|
|
#define RTQ6752_MINSS_TIMEUS 5000
|
|
|
|
struct rtq6752_priv {
|
|
struct regmap *regmap;
|
|
struct gpio_desc *enable_gpio;
|
|
struct mutex lock;
|
|
unsigned char enable_flag;
|
|
};
|
|
|
|
static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
|
|
int rid = rdev_get_id(rdev), ret;
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (!priv->enable_flag) {
|
|
if (priv->enable_gpio) {
|
|
gpiod_set_value(priv->enable_gpio, 1);
|
|
|
|
usleep_range(RTQ6752_I2CRDY_TIMEUS,
|
|
RTQ6752_I2CRDY_TIMEUS + 100);
|
|
}
|
|
|
|
regcache_cache_only(priv->regmap, false);
|
|
ret = regcache_sync(priv->regmap);
|
|
if (ret) {
|
|
mutex_unlock(&priv->lock);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
priv->enable_flag |= BIT(rid);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return regulator_enable_regmap(rdev);
|
|
}
|
|
|
|
static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
|
|
int rid = rdev_get_id(rdev), ret;
|
|
|
|
ret = regulator_disable_regmap(rdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&priv->lock);
|
|
priv->enable_flag &= ~BIT(rid);
|
|
|
|
if (!priv->enable_flag) {
|
|
regcache_cache_only(priv->regmap, true);
|
|
regcache_mark_dirty(priv->regmap);
|
|
|
|
if (priv->enable_gpio)
|
|
gpiod_set_value(priv->enable_gpio, 0);
|
|
|
|
}
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtq6752_get_error_flags(struct regulator_dev *rdev,
|
|
unsigned int *flags)
|
|
{
|
|
unsigned int val, events = 0;
|
|
const unsigned int fault_mask[] = {
|
|
RTQ6752_PAVDDF_MASK, RTQ6752_NAVDDF_MASK };
|
|
int rid = rdev_get_id(rdev), ret;
|
|
|
|
ret = regmap_read(rdev->regmap, RTQ6752_REG_FAULT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & fault_mask[rid])
|
|
events = REGULATOR_ERROR_REGULATION_OUT;
|
|
|
|
*flags = events;
|
|
return 0;
|
|
}
|
|
|
|
static const struct regulator_ops rtq6752_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.enable = rtq6752_set_vdd_enable,
|
|
.disable = rtq6752_set_vdd_disable,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
|
.get_error_flags = rtq6752_get_error_flags,
|
|
};
|
|
|
|
static const struct regulator_desc rtq6752_regulator_descs[] = {
|
|
{
|
|
.name = "rtq6752-pavdd",
|
|
.of_match = of_match_ptr("pavdd"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RTQ6752_IDX_PAVDD,
|
|
.n_voltages = RTQ6752_VOUT_NUM,
|
|
.ops = &rtq6752_regulator_ops,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = RTQ6752_VOUT_MINUV,
|
|
.uV_step = RTQ6752_VOUT_STEPUV,
|
|
.enable_time = RTQ6752_MINSS_TIMEUS,
|
|
.vsel_reg = RTQ6752_REG_PAVDD,
|
|
.vsel_mask = RTQ6752_VOUT_MASK,
|
|
.enable_reg = RTQ6752_REG_CHSWITCH,
|
|
.enable_mask = RTQ6752_PAVDDEN_MASK,
|
|
.active_discharge_reg = RTQ6752_REG_OPTION1,
|
|
.active_discharge_mask = RTQ6752_PAVDDAD_MASK,
|
|
.active_discharge_off = RTQ6752_PAVDDAD_MASK,
|
|
},
|
|
{
|
|
.name = "rtq6752-navdd",
|
|
.of_match = of_match_ptr("navdd"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RTQ6752_IDX_NAVDD,
|
|
.n_voltages = RTQ6752_VOUT_NUM,
|
|
.ops = &rtq6752_regulator_ops,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = RTQ6752_VOUT_MINUV,
|
|
.uV_step = RTQ6752_VOUT_STEPUV,
|
|
.enable_time = RTQ6752_MINSS_TIMEUS,
|
|
.vsel_reg = RTQ6752_REG_NAVDD,
|
|
.vsel_mask = RTQ6752_VOUT_MASK,
|
|
.enable_reg = RTQ6752_REG_CHSWITCH,
|
|
.enable_mask = RTQ6752_NAVDDEN_MASK,
|
|
.active_discharge_reg = RTQ6752_REG_OPTION1,
|
|
.active_discharge_mask = RTQ6752_NAVDDAD_MASK,
|
|
.active_discharge_off = RTQ6752_NAVDDAD_MASK,
|
|
}
|
|
};
|
|
|
|
static int rtq6752_init_device_properties(struct rtq6752_priv *priv)
|
|
{
|
|
u8 raw_vals[] = { 0, 0 };
|
|
int ret;
|
|
|
|
/* Configure PAVDD on and softstart delay time to the minimum */
|
|
ret = regmap_raw_write(priv->regmap, RTQ6752_REG_PAVDDONDLY, raw_vals,
|
|
ARRAY_SIZE(raw_vals));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Configure NAVDD on and softstart delay time to the minimum */
|
|
return regmap_raw_write(priv->regmap, RTQ6752_REG_NAVDDONDLY, raw_vals,
|
|
ARRAY_SIZE(raw_vals));
|
|
}
|
|
|
|
static bool rtq6752_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
if (reg == RTQ6752_REG_FAULT)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static const struct reg_default rtq6752_reg_defaults[] = {
|
|
{ RTQ6752_REG_PAVDD, 0x14 },
|
|
{ RTQ6752_REG_NAVDD, 0x14 },
|
|
{ RTQ6752_REG_PAVDDONDLY, 0x01 },
|
|
{ RTQ6752_REG_PAVDDSSTIME, 0x01 },
|
|
{ RTQ6752_REG_NAVDDONDLY, 0x01 },
|
|
{ RTQ6752_REG_NAVDDSSTIME, 0x01 },
|
|
{ RTQ6752_REG_OPTION1, 0x07 },
|
|
{ RTQ6752_REG_CHSWITCH, 0x29 },
|
|
};
|
|
|
|
static const struct regmap_config rtq6752_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = RTQ6752_REG_FAULT,
|
|
.reg_defaults = rtq6752_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(rtq6752_reg_defaults),
|
|
.volatile_reg = rtq6752_is_volatile_reg,
|
|
};
|
|
|
|
static int rtq6752_probe(struct i2c_client *i2c)
|
|
{
|
|
struct rtq6752_priv *priv;
|
|
struct regulator_config reg_cfg = {};
|
|
struct regulator_dev *rdev;
|
|
int i, ret;
|
|
|
|
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&priv->lock);
|
|
|
|
priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(priv->enable_gpio)) {
|
|
dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
|
|
return PTR_ERR(priv->enable_gpio);
|
|
}
|
|
|
|
usleep_range(RTQ6752_I2CRDY_TIMEUS, RTQ6752_I2CRDY_TIMEUS + 100);
|
|
/* Default EN pin to high, PAVDD and NAVDD will be on */
|
|
priv->enable_flag = RTQ6752_ENABLE_MASK;
|
|
|
|
priv->regmap = devm_regmap_init_i2c(i2c, &rtq6752_regmap_config);
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_err(&i2c->dev, "Failed to init regmap\n");
|
|
return PTR_ERR(priv->regmap);
|
|
}
|
|
|
|
ret = rtq6752_init_device_properties(priv);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to init device properties\n");
|
|
return ret;
|
|
}
|
|
|
|
reg_cfg.dev = &i2c->dev;
|
|
reg_cfg.regmap = priv->regmap;
|
|
reg_cfg.driver_data = priv;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtq6752_regulator_descs); i++) {
|
|
rdev = devm_regulator_register(&i2c->dev,
|
|
rtq6752_regulator_descs + i,
|
|
®_cfg);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&i2c->dev, "Failed to init %d regulator\n", i);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id __maybe_unused rtq6752_device_table[] = {
|
|
{ .compatible = "richtek,rtq6752", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rtq6752_device_table);
|
|
|
|
static struct i2c_driver rtq6752_driver = {
|
|
.driver = {
|
|
.name = "rtq6752",
|
|
.of_match_table = rtq6752_device_table,
|
|
},
|
|
.probe_new = rtq6752_probe,
|
|
};
|
|
module_i2c_driver(rtq6752_driver);
|
|
|
|
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
|
MODULE_DESCRIPTION("Richtek RTQ6752 Regulator Driver");
|
|
MODULE_LICENSE("GPL v2");
|