mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
616844408d
Enable building the PL061 GPIO driver as a module. This does change the initcall level when built-in. This shouldn't be a problem as any user should support deferred probe by now. A scan of DT based platforms at least didn't reveal any users that would be a problem. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
427 lines
11 KiB
C
427 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2008, 2009 Provigent Ltd.
|
|
*
|
|
* Author: Baruch Siach <baruch@tkos.co.il>
|
|
*
|
|
* Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)
|
|
*
|
|
* Data sheet: ARM DDI 0190B, September 2000
|
|
*/
|
|
#include <linux/spinlock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/device.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pm.h>
|
|
|
|
#define GPIODIR 0x400
|
|
#define GPIOIS 0x404
|
|
#define GPIOIBE 0x408
|
|
#define GPIOIEV 0x40C
|
|
#define GPIOIE 0x410
|
|
#define GPIORIS 0x414
|
|
#define GPIOMIS 0x418
|
|
#define GPIOIC 0x41C
|
|
|
|
#define PL061_GPIO_NR 8
|
|
|
|
#ifdef CONFIG_PM
|
|
struct pl061_context_save_regs {
|
|
u8 gpio_data;
|
|
u8 gpio_dir;
|
|
u8 gpio_is;
|
|
u8 gpio_ibe;
|
|
u8 gpio_iev;
|
|
u8 gpio_ie;
|
|
};
|
|
#endif
|
|
|
|
struct pl061 {
|
|
raw_spinlock_t lock;
|
|
|
|
void __iomem *base;
|
|
struct gpio_chip gc;
|
|
struct irq_chip irq_chip;
|
|
int parent_irq;
|
|
|
|
#ifdef CONFIG_PM
|
|
struct pl061_context_save_regs csave_regs;
|
|
#endif
|
|
};
|
|
|
|
static int pl061_get_direction(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
|
|
if (readb(pl061->base + GPIODIR) & BIT(offset))
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
}
|
|
|
|
static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
unsigned char gpiodir;
|
|
|
|
raw_spin_lock_irqsave(&pl061->lock, flags);
|
|
gpiodir = readb(pl061->base + GPIODIR);
|
|
gpiodir &= ~(BIT(offset));
|
|
writeb(gpiodir, pl061->base + GPIODIR);
|
|
raw_spin_unlock_irqrestore(&pl061->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
unsigned char gpiodir;
|
|
|
|
raw_spin_lock_irqsave(&pl061->lock, flags);
|
|
writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
|
|
gpiodir = readb(pl061->base + GPIODIR);
|
|
gpiodir |= BIT(offset);
|
|
writeb(gpiodir, pl061->base + GPIODIR);
|
|
|
|
/*
|
|
* gpio value is set again, because pl061 doesn't allow to set value of
|
|
* a gpio pin before configuring it in OUT mode.
|
|
*/
|
|
writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
|
|
raw_spin_unlock_irqrestore(&pl061->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
|
|
return !!readb(pl061->base + (BIT(offset + 2)));
|
|
}
|
|
|
|
static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
|
|
{
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
|
|
writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
|
|
}
|
|
|
|
static int pl061_irq_type(struct irq_data *d, unsigned trigger)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
int offset = irqd_to_hwirq(d);
|
|
unsigned long flags;
|
|
u8 gpiois, gpioibe, gpioiev;
|
|
u8 bit = BIT(offset);
|
|
|
|
if (offset < 0 || offset >= PL061_GPIO_NR)
|
|
return -EINVAL;
|
|
|
|
if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) &&
|
|
(trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)))
|
|
{
|
|
dev_err(gc->parent,
|
|
"trying to configure line %d for both level and edge "
|
|
"detection, choose one!\n",
|
|
offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
raw_spin_lock_irqsave(&pl061->lock, flags);
|
|
|
|
gpioiev = readb(pl061->base + GPIOIEV);
|
|
gpiois = readb(pl061->base + GPIOIS);
|
|
gpioibe = readb(pl061->base + GPIOIBE);
|
|
|
|
if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
|
|
|
|
/* Disable edge detection */
|
|
gpioibe &= ~bit;
|
|
/* Enable level detection */
|
|
gpiois |= bit;
|
|
/* Select polarity */
|
|
if (polarity)
|
|
gpioiev |= bit;
|
|
else
|
|
gpioiev &= ~bit;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
dev_dbg(gc->parent, "line %d: IRQ on %s level\n",
|
|
offset,
|
|
polarity ? "HIGH" : "LOW");
|
|
} else if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
|
|
/* Disable level detection */
|
|
gpiois &= ~bit;
|
|
/* Select both edges, setting this makes GPIOEV be ignored */
|
|
gpioibe |= bit;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
dev_dbg(gc->parent, "line %d: IRQ on both edges\n", offset);
|
|
} else if ((trigger & IRQ_TYPE_EDGE_RISING) ||
|
|
(trigger & IRQ_TYPE_EDGE_FALLING)) {
|
|
bool rising = trigger & IRQ_TYPE_EDGE_RISING;
|
|
|
|
/* Disable level detection */
|
|
gpiois &= ~bit;
|
|
/* Clear detection on both edges */
|
|
gpioibe &= ~bit;
|
|
/* Select edge */
|
|
if (rising)
|
|
gpioiev |= bit;
|
|
else
|
|
gpioiev &= ~bit;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
dev_dbg(gc->parent, "line %d: IRQ on %s edge\n",
|
|
offset,
|
|
rising ? "RISING" : "FALLING");
|
|
} else {
|
|
/* No trigger: disable everything */
|
|
gpiois &= ~bit;
|
|
gpioibe &= ~bit;
|
|
gpioiev &= ~bit;
|
|
irq_set_handler_locked(d, handle_bad_irq);
|
|
dev_warn(gc->parent, "no trigger selected for line %d\n",
|
|
offset);
|
|
}
|
|
|
|
writeb(gpiois, pl061->base + GPIOIS);
|
|
writeb(gpioibe, pl061->base + GPIOIBE);
|
|
writeb(gpioiev, pl061->base + GPIOIEV);
|
|
|
|
raw_spin_unlock_irqrestore(&pl061->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pl061_irq_handler(struct irq_desc *desc)
|
|
{
|
|
unsigned long pending;
|
|
int offset;
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
struct irq_chip *irqchip = irq_desc_get_chip(desc);
|
|
|
|
chained_irq_enter(irqchip, desc);
|
|
|
|
pending = readb(pl061->base + GPIOMIS);
|
|
if (pending) {
|
|
for_each_set_bit(offset, &pending, PL061_GPIO_NR)
|
|
generic_handle_irq(irq_find_mapping(gc->irq.domain,
|
|
offset));
|
|
}
|
|
|
|
chained_irq_exit(irqchip, desc);
|
|
}
|
|
|
|
static void pl061_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
|
|
u8 gpioie;
|
|
|
|
raw_spin_lock(&pl061->lock);
|
|
gpioie = readb(pl061->base + GPIOIE) & ~mask;
|
|
writeb(gpioie, pl061->base + GPIOIE);
|
|
raw_spin_unlock(&pl061->lock);
|
|
}
|
|
|
|
static void pl061_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
|
|
u8 gpioie;
|
|
|
|
raw_spin_lock(&pl061->lock);
|
|
gpioie = readb(pl061->base + GPIOIE) | mask;
|
|
writeb(gpioie, pl061->base + GPIOIE);
|
|
raw_spin_unlock(&pl061->lock);
|
|
}
|
|
|
|
/**
|
|
* pl061_irq_ack() - ACK an edge IRQ
|
|
* @d: IRQ data for this IRQ
|
|
*
|
|
* This gets called from the edge IRQ handler to ACK the edge IRQ
|
|
* in the GPIOIC (interrupt-clear) register. For level IRQs this is
|
|
* not needed: these go away when the level signal goes away.
|
|
*/
|
|
static void pl061_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
|
|
|
|
raw_spin_lock(&pl061->lock);
|
|
writeb(mask, pl061->base + GPIOIC);
|
|
raw_spin_unlock(&pl061->lock);
|
|
}
|
|
|
|
static int pl061_irq_set_wake(struct irq_data *d, unsigned int state)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pl061 *pl061 = gpiochip_get_data(gc);
|
|
|
|
return irq_set_irq_wake(pl061->parent_irq, state);
|
|
}
|
|
|
|
static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
|
|
{
|
|
struct device *dev = &adev->dev;
|
|
struct pl061 *pl061;
|
|
struct gpio_irq_chip *girq;
|
|
int ret, irq;
|
|
|
|
pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL);
|
|
if (pl061 == NULL)
|
|
return -ENOMEM;
|
|
|
|
pl061->base = devm_ioremap_resource(dev, &adev->res);
|
|
if (IS_ERR(pl061->base))
|
|
return PTR_ERR(pl061->base);
|
|
|
|
raw_spin_lock_init(&pl061->lock);
|
|
pl061->gc.request = gpiochip_generic_request;
|
|
pl061->gc.free = gpiochip_generic_free;
|
|
pl061->gc.base = -1;
|
|
pl061->gc.get_direction = pl061_get_direction;
|
|
pl061->gc.direction_input = pl061_direction_input;
|
|
pl061->gc.direction_output = pl061_direction_output;
|
|
pl061->gc.get = pl061_get_value;
|
|
pl061->gc.set = pl061_set_value;
|
|
pl061->gc.ngpio = PL061_GPIO_NR;
|
|
pl061->gc.label = dev_name(dev);
|
|
pl061->gc.parent = dev;
|
|
pl061->gc.owner = THIS_MODULE;
|
|
|
|
/*
|
|
* irq_chip support
|
|
*/
|
|
pl061->irq_chip.name = dev_name(dev);
|
|
pl061->irq_chip.irq_ack = pl061_irq_ack;
|
|
pl061->irq_chip.irq_mask = pl061_irq_mask;
|
|
pl061->irq_chip.irq_unmask = pl061_irq_unmask;
|
|
pl061->irq_chip.irq_set_type = pl061_irq_type;
|
|
pl061->irq_chip.irq_set_wake = pl061_irq_set_wake;
|
|
|
|
writeb(0, pl061->base + GPIOIE); /* disable irqs */
|
|
irq = adev->irq[0];
|
|
if (!irq)
|
|
dev_warn(&adev->dev, "IRQ support disabled\n");
|
|
pl061->parent_irq = irq;
|
|
|
|
girq = &pl061->gc.irq;
|
|
girq->chip = &pl061->irq_chip;
|
|
girq->parent_handler = pl061_irq_handler;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->parents[0] = irq;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
|
|
ret = devm_gpiochip_add_data(dev, &pl061->gc, pl061);
|
|
if (ret)
|
|
return ret;
|
|
|
|
amba_set_drvdata(adev, pl061);
|
|
dev_info(dev, "PL061 GPIO chip registered\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pl061_suspend(struct device *dev)
|
|
{
|
|
struct pl061 *pl061 = dev_get_drvdata(dev);
|
|
int offset;
|
|
|
|
pl061->csave_regs.gpio_data = 0;
|
|
pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR);
|
|
pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS);
|
|
pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE);
|
|
pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV);
|
|
pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE);
|
|
|
|
for (offset = 0; offset < PL061_GPIO_NR; offset++) {
|
|
if (pl061->csave_regs.gpio_dir & (BIT(offset)))
|
|
pl061->csave_regs.gpio_data |=
|
|
pl061_get_value(&pl061->gc, offset) << offset;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl061_resume(struct device *dev)
|
|
{
|
|
struct pl061 *pl061 = dev_get_drvdata(dev);
|
|
int offset;
|
|
|
|
for (offset = 0; offset < PL061_GPIO_NR; offset++) {
|
|
if (pl061->csave_regs.gpio_dir & (BIT(offset)))
|
|
pl061_direction_output(&pl061->gc, offset,
|
|
pl061->csave_regs.gpio_data &
|
|
(BIT(offset)));
|
|
else
|
|
pl061_direction_input(&pl061->gc, offset);
|
|
}
|
|
|
|
writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS);
|
|
writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE);
|
|
writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV);
|
|
writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops pl061_dev_pm_ops = {
|
|
.suspend = pl061_suspend,
|
|
.resume = pl061_resume,
|
|
.freeze = pl061_suspend,
|
|
.restore = pl061_resume,
|
|
};
|
|
#endif
|
|
|
|
static const struct amba_id pl061_ids[] = {
|
|
{
|
|
.id = 0x00041061,
|
|
.mask = 0x000fffff,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(amba, pl061_ids);
|
|
|
|
static struct amba_driver pl061_gpio_driver = {
|
|
.drv = {
|
|
.name = "pl061_gpio",
|
|
#ifdef CONFIG_PM
|
|
.pm = &pl061_dev_pm_ops,
|
|
#endif
|
|
},
|
|
.id_table = pl061_ids,
|
|
.probe = pl061_probe,
|
|
};
|
|
module_amba_driver(pl061_gpio_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|