mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 14:05:19 +08:00
86495af117
In commit9011e49d54
("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted to GPL-only marked symbols. This interacts oddly with the DVB logic which only uses dvb_attach() to load the dvb driver which then uses symbol_get(). Fix this up by properly marking all of the dvb_attach attach symbols as EXPORT_SYMBOL_GPL(). Fixes:9011e49d54
("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") Cc: stable <stable@kernel.org> Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-media@vger.kernel.org Cc: linux-modules@vger.kernel.org Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
403 lines
9.7 KiB
C
403 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* horus3a.h
|
|
*
|
|
* Sony Horus3A DVB-S/S2 tuner driver
|
|
*
|
|
* Copyright 2012 Sony Corporation
|
|
* Copyright (C) 2014 NetUP Inc.
|
|
* Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
|
|
* Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dvb/frontend.h>
|
|
#include <linux/types.h>
|
|
#include "horus3a.h"
|
|
#include <media/dvb_frontend.h>
|
|
|
|
#define MAX_WRITE_REGSIZE 5
|
|
|
|
enum horus3a_state {
|
|
STATE_UNKNOWN,
|
|
STATE_SLEEP,
|
|
STATE_ACTIVE
|
|
};
|
|
|
|
struct horus3a_priv {
|
|
u32 frequency;
|
|
u8 i2c_address;
|
|
struct i2c_adapter *i2c;
|
|
enum horus3a_state state;
|
|
void *set_tuner_data;
|
|
int (*set_tuner)(void *, int);
|
|
};
|
|
|
|
static void horus3a_i2c_debug(struct horus3a_priv *priv,
|
|
u8 reg, u8 write, const u8 *data, u32 len)
|
|
{
|
|
dev_dbg(&priv->i2c->dev, "horus3a: I2C %s reg 0x%02x size %d\n",
|
|
(write == 0 ? "read" : "write"), reg, len);
|
|
print_hex_dump_bytes("horus3a: I2C data: ",
|
|
DUMP_PREFIX_OFFSET, data, len);
|
|
}
|
|
|
|
static int horus3a_write_regs(struct horus3a_priv *priv,
|
|
u8 reg, const u8 *data, u32 len)
|
|
{
|
|
int ret;
|
|
u8 buf[MAX_WRITE_REGSIZE + 1];
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = priv->i2c_address,
|
|
.flags = 0,
|
|
.len = len + 1,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
if (len + 1 > sizeof(buf)) {
|
|
dev_warn(&priv->i2c->dev,"wr reg=%04x: len=%d is too big!\n",
|
|
reg, len + 1);
|
|
return -E2BIG;
|
|
}
|
|
|
|
horus3a_i2c_debug(priv, reg, 1, data, len);
|
|
buf[0] = reg;
|
|
memcpy(&buf[1], data, len);
|
|
ret = i2c_transfer(priv->i2c, msg, 1);
|
|
if (ret >= 0 && ret != 1)
|
|
ret = -EREMOTEIO;
|
|
if (ret < 0) {
|
|
dev_warn(&priv->i2c->dev,
|
|
"%s: i2c wr failed=%d reg=%02x len=%d\n",
|
|
KBUILD_MODNAME, ret, reg, len);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int horus3a_write_reg(struct horus3a_priv *priv, u8 reg, u8 val)
|
|
{
|
|
u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
|
|
|
|
return horus3a_write_regs(priv, reg, &tmp, 1);
|
|
}
|
|
|
|
static int horus3a_enter_power_save(struct horus3a_priv *priv)
|
|
{
|
|
u8 data[2];
|
|
|
|
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
|
|
if (priv->state == STATE_SLEEP)
|
|
return 0;
|
|
/* IQ Generator disable */
|
|
horus3a_write_reg(priv, 0x2a, 0x79);
|
|
/* MDIV_EN = 0 */
|
|
horus3a_write_reg(priv, 0x29, 0x70);
|
|
/* VCO disable preparation */
|
|
horus3a_write_reg(priv, 0x28, 0x3e);
|
|
/* VCO buffer disable */
|
|
horus3a_write_reg(priv, 0x2a, 0x19);
|
|
/* VCO calibration disable */
|
|
horus3a_write_reg(priv, 0x1c, 0x00);
|
|
/* Power save setting (xtal is not stopped) */
|
|
data[0] = 0xC0;
|
|
/* LNA is Disabled */
|
|
data[1] = 0xA7;
|
|
/* 0x11 - 0x12 */
|
|
horus3a_write_regs(priv, 0x11, data, sizeof(data));
|
|
priv->state = STATE_SLEEP;
|
|
return 0;
|
|
}
|
|
|
|
static int horus3a_leave_power_save(struct horus3a_priv *priv)
|
|
{
|
|
u8 data[2];
|
|
|
|
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
|
|
if (priv->state == STATE_ACTIVE)
|
|
return 0;
|
|
/* Leave power save */
|
|
data[0] = 0x00;
|
|
/* LNA is Disabled */
|
|
data[1] = 0xa7;
|
|
/* 0x11 - 0x12 */
|
|
horus3a_write_regs(priv, 0x11, data, sizeof(data));
|
|
/* VCO buffer enable */
|
|
horus3a_write_reg(priv, 0x2a, 0x79);
|
|
/* VCO calibration enable */
|
|
horus3a_write_reg(priv, 0x1c, 0xc0);
|
|
/* MDIV_EN = 1 */
|
|
horus3a_write_reg(priv, 0x29, 0x71);
|
|
usleep_range(5000, 7000);
|
|
priv->state = STATE_ACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
static int horus3a_init(struct dvb_frontend *fe)
|
|
{
|
|
struct horus3a_priv *priv = fe->tuner_priv;
|
|
|
|
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void horus3a_release(struct dvb_frontend *fe)
|
|
{
|
|
struct horus3a_priv *priv = fe->tuner_priv;
|
|
|
|
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
|
|
kfree(fe->tuner_priv);
|
|
fe->tuner_priv = NULL;
|
|
}
|
|
|
|
static int horus3a_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct horus3a_priv *priv = fe->tuner_priv;
|
|
|
|
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
|
|
horus3a_enter_power_save(priv);
|
|
return 0;
|
|
}
|
|
|
|
static int horus3a_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct horus3a_priv *priv = fe->tuner_priv;
|
|
u32 frequency = p->frequency;
|
|
u32 symbol_rate = p->symbol_rate/1000;
|
|
u8 mixdiv = 0;
|
|
u8 mdiv = 0;
|
|
u32 ms = 0;
|
|
u8 f_ctl = 0;
|
|
u8 g_ctl = 0;
|
|
u8 fc_lpf = 0;
|
|
u8 data[5];
|
|
|
|
dev_dbg(&priv->i2c->dev, "%s(): frequency %dkHz symbol_rate %dksps\n",
|
|
__func__, frequency, symbol_rate);
|
|
if (priv->set_tuner)
|
|
priv->set_tuner(priv->set_tuner_data, 0);
|
|
if (priv->state == STATE_SLEEP)
|
|
horus3a_leave_power_save(priv);
|
|
|
|
/* frequency should be X MHz (X : integer) */
|
|
frequency = DIV_ROUND_CLOSEST(frequency, 1000) * 1000;
|
|
if (frequency <= 1155000) {
|
|
mixdiv = 4;
|
|
mdiv = 1;
|
|
} else {
|
|
mixdiv = 2;
|
|
mdiv = 0;
|
|
}
|
|
/* Assumed that fREF == 1MHz (1000kHz) */
|
|
ms = DIV_ROUND_CLOSEST((frequency * mixdiv) / 2, 1000);
|
|
if (ms > 0x7FFF) { /* 15 bit */
|
|
dev_err(&priv->i2c->dev, "horus3a: invalid frequency %d\n",
|
|
frequency);
|
|
return -EINVAL;
|
|
}
|
|
if (frequency < 975000) {
|
|
/* F_CTL=11100 G_CTL=001 */
|
|
f_ctl = 0x1C;
|
|
g_ctl = 0x01;
|
|
} else if (frequency < 1050000) {
|
|
/* F_CTL=11000 G_CTL=010 */
|
|
f_ctl = 0x18;
|
|
g_ctl = 0x02;
|
|
} else if (frequency < 1150000) {
|
|
/* F_CTL=10100 G_CTL=010 */
|
|
f_ctl = 0x14;
|
|
g_ctl = 0x02;
|
|
} else if (frequency < 1250000) {
|
|
/* F_CTL=10000 G_CTL=011 */
|
|
f_ctl = 0x10;
|
|
g_ctl = 0x03;
|
|
} else if (frequency < 1350000) {
|
|
/* F_CTL=01100 G_CTL=100 */
|
|
f_ctl = 0x0C;
|
|
g_ctl = 0x04;
|
|
} else if (frequency < 1450000) {
|
|
/* F_CTL=01010 G_CTL=100 */
|
|
f_ctl = 0x0A;
|
|
g_ctl = 0x04;
|
|
} else if (frequency < 1600000) {
|
|
/* F_CTL=00111 G_CTL=101 */
|
|
f_ctl = 0x07;
|
|
g_ctl = 0x05;
|
|
} else if (frequency < 1800000) {
|
|
/* F_CTL=00100 G_CTL=010 */
|
|
f_ctl = 0x04;
|
|
g_ctl = 0x02;
|
|
} else if (frequency < 2000000) {
|
|
/* F_CTL=00010 G_CTL=001 */
|
|
f_ctl = 0x02;
|
|
g_ctl = 0x01;
|
|
} else {
|
|
/* F_CTL=00000 G_CTL=000 */
|
|
f_ctl = 0x00;
|
|
g_ctl = 0x00;
|
|
}
|
|
/* LPF cutoff frequency setting */
|
|
if (p->delivery_system == SYS_DVBS) {
|
|
/*
|
|
* rolloff = 0.35
|
|
* SR <= 4.3
|
|
* fc_lpf = 5
|
|
* 4.3 < SR <= 10
|
|
* fc_lpf = SR * (1 + rolloff) / 2 + SR / 2 =
|
|
* SR * 1.175 = SR * (47/40)
|
|
* 10 < SR
|
|
* fc_lpf = SR * (1 + rolloff) / 2 + 5 =
|
|
* SR * 0.675 + 5 = SR * (27/40) + 5
|
|
* NOTE: The result should be round up.
|
|
*/
|
|
if (symbol_rate <= 4300)
|
|
fc_lpf = 5;
|
|
else if (symbol_rate <= 10000)
|
|
fc_lpf = (u8)DIV_ROUND_UP(symbol_rate * 47, 40000);
|
|
else
|
|
fc_lpf = (u8)DIV_ROUND_UP(symbol_rate * 27, 40000) + 5;
|
|
/* 5 <= fc_lpf <= 36 */
|
|
if (fc_lpf > 36)
|
|
fc_lpf = 36;
|
|
} else if (p->delivery_system == SYS_DVBS2) {
|
|
/*
|
|
* SR <= 4.5:
|
|
* fc_lpf = 5
|
|
* 4.5 < SR <= 10:
|
|
* fc_lpf = SR * (1 + rolloff) / 2 + SR / 2
|
|
* 10 < SR:
|
|
* fc_lpf = SR * (1 + rolloff) / 2 + 5
|
|
* NOTE: The result should be round up.
|
|
*/
|
|
if (symbol_rate <= 4500)
|
|
fc_lpf = 5;
|
|
else if (symbol_rate <= 10000)
|
|
fc_lpf = (u8)((symbol_rate * 11 + (10000-1)) / 10000);
|
|
else
|
|
fc_lpf = (u8)((symbol_rate * 3 + (5000-1)) / 5000 + 5);
|
|
/* 5 <= fc_lpf <= 36 is valid */
|
|
if (fc_lpf > 36)
|
|
fc_lpf = 36;
|
|
} else {
|
|
dev_err(&priv->i2c->dev,
|
|
"horus3a: invalid delivery system %d\n",
|
|
p->delivery_system);
|
|
return -EINVAL;
|
|
}
|
|
/* 0x00 - 0x04 */
|
|
data[0] = (u8)((ms >> 7) & 0xFF);
|
|
data[1] = (u8)((ms << 1) & 0xFF);
|
|
data[2] = 0x00;
|
|
data[3] = 0x00;
|
|
data[4] = (u8)(mdiv << 7);
|
|
horus3a_write_regs(priv, 0x00, data, sizeof(data));
|
|
/* Write G_CTL, F_CTL */
|
|
horus3a_write_reg(priv, 0x09, (u8)((g_ctl << 5) | f_ctl));
|
|
/* Write LPF cutoff frequency */
|
|
horus3a_write_reg(priv, 0x37, (u8)(0x80 | (fc_lpf << 1)));
|
|
/* Start Calibration */
|
|
horus3a_write_reg(priv, 0x05, 0x80);
|
|
/* IQ Generator enable */
|
|
horus3a_write_reg(priv, 0x2a, 0x7b);
|
|
/* tuner stabilization time */
|
|
msleep(60);
|
|
/* Store tuned frequency to the struct */
|
|
priv->frequency = ms * 2 * 1000 / mixdiv;
|
|
return 0;
|
|
}
|
|
|
|
static int horus3a_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct horus3a_priv *priv = fe->tuner_priv;
|
|
|
|
*frequency = priv->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops horus3a_tuner_ops = {
|
|
.info = {
|
|
.name = "Sony Horus3a",
|
|
.frequency_min_hz = 950 * MHz,
|
|
.frequency_max_hz = 2150 * MHz,
|
|
.frequency_step_hz = 1 * MHz,
|
|
},
|
|
.init = horus3a_init,
|
|
.release = horus3a_release,
|
|
.sleep = horus3a_sleep,
|
|
.set_params = horus3a_set_params,
|
|
.get_frequency = horus3a_get_frequency,
|
|
};
|
|
|
|
struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
|
|
const struct horus3a_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
u8 buf[3], val;
|
|
struct horus3a_priv *priv = NULL;
|
|
|
|
priv = kzalloc(sizeof(struct horus3a_priv), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return NULL;
|
|
priv->i2c_address = (config->i2c_address >> 1);
|
|
priv->i2c = i2c;
|
|
priv->set_tuner_data = config->set_tuner_priv;
|
|
priv->set_tuner = config->set_tuner_callback;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* wait 4ms after power on */
|
|
usleep_range(4000, 6000);
|
|
/* IQ Generator disable */
|
|
horus3a_write_reg(priv, 0x2a, 0x79);
|
|
/* REF_R = Xtal Frequency */
|
|
buf[0] = config->xtal_freq_mhz;
|
|
buf[1] = config->xtal_freq_mhz;
|
|
buf[2] = 0;
|
|
/* 0x6 - 0x8 */
|
|
horus3a_write_regs(priv, 0x6, buf, 3);
|
|
/* IQ Out = Single Ended */
|
|
horus3a_write_reg(priv, 0x0a, 0x40);
|
|
switch (config->xtal_freq_mhz) {
|
|
case 27:
|
|
val = 0x1f;
|
|
break;
|
|
case 24:
|
|
val = 0x10;
|
|
break;
|
|
case 16:
|
|
val = 0xc;
|
|
break;
|
|
default:
|
|
val = 0;
|
|
dev_warn(&priv->i2c->dev,
|
|
"horus3a: invalid xtal frequency %dMHz\n",
|
|
config->xtal_freq_mhz);
|
|
break;
|
|
}
|
|
val <<= 2;
|
|
horus3a_write_reg(priv, 0x0e, val);
|
|
horus3a_enter_power_save(priv);
|
|
usleep_range(3000, 5000);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
memcpy(&fe->ops.tuner_ops, &horus3a_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
fe->tuner_priv = priv;
|
|
dev_info(&priv->i2c->dev,
|
|
"Sony HORUS3A attached on addr=%x at I2C adapter %p\n",
|
|
priv->i2c_address, priv->i2c);
|
|
return fe;
|
|
}
|
|
EXPORT_SYMBOL_GPL(horus3a_attach);
|
|
|
|
MODULE_DESCRIPTION("Sony HORUS3A satellite tuner driver");
|
|
MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>");
|
|
MODULE_LICENSE("GPL");
|