korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 16:54:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
85a12d7eb8
linux/drivers/hwmon/max6639.c
Stephen Kitt 6748703856 hwmon: use simple i2c probe function 
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23 09:42:39 -07:00

594 lines
17 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* max6639.c - Support for Maxim MAX6639
*
* 2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller
*
* Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
*
* based on the initial MAX6639 support from semptian.net
* by He Changqing <hechangqing@semptian.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_data/max6639.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
/* The MAX6639 registers, valid channel numbers: 0, 1 */
#define MAX6639_REG_TEMP(ch) (0x00 + (ch))
#define MAX6639_REG_STATUS 0x02
#define MAX6639_REG_OUTPUT_MASK 0x03
#define MAX6639_REG_GCONFIG 0x04
#define MAX6639_REG_TEMP_EXT(ch) (0x05 + (ch))
#define MAX6639_REG_ALERT_LIMIT(ch) (0x08 + (ch))
#define MAX6639_REG_OT_LIMIT(ch) (0x0A + (ch))
#define MAX6639_REG_THERM_LIMIT(ch) (0x0C + (ch))
#define MAX6639_REG_FAN_CONFIG1(ch) (0x10 + (ch) * 4)
#define MAX6639_REG_FAN_CONFIG2a(ch) (0x11 + (ch) * 4)
#define MAX6639_REG_FAN_CONFIG2b(ch) (0x12 + (ch) * 4)
#define MAX6639_REG_FAN_CONFIG3(ch) (0x13 + (ch) * 4)
#define MAX6639_REG_FAN_CNT(ch) (0x20 + (ch))
#define MAX6639_REG_TARGET_CNT(ch) (0x22 + (ch))
#define MAX6639_REG_FAN_PPR(ch) (0x24 + (ch))
#define MAX6639_REG_TARGTDUTY(ch) (0x26 + (ch))
#define MAX6639_REG_FAN_START_TEMP(ch) (0x28 + (ch))
#define MAX6639_REG_DEVID 0x3D
#define MAX6639_REG_MANUID 0x3E
#define MAX6639_REG_DEVREV 0x3F
/* Register bits */
#define MAX6639_GCONFIG_STANDBY 0x80
#define MAX6639_GCONFIG_POR 0x40
#define MAX6639_GCONFIG_DISABLE_TIMEOUT 0x20
#define MAX6639_GCONFIG_CH2_LOCAL 0x10
#define MAX6639_GCONFIG_PWM_FREQ_HI 0x08
#define MAX6639_FAN_CONFIG1_PWM 0x80
#define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40
static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
0 : (rpm_ranges[rpm_range] * 30) / (val))
#define TEMP_LIMIT_TO_REG(val) clamp_val((val) / 1000, 0, 255)
/*
* Client data (each client gets its own)
*/
struct max6639_data {
struct i2c_client *client;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
/* Register values sampled regularly */
u16 temp[2]; /* Temperature, in 1/8 C, 0..255 C */
bool temp_fault[2]; /* Detected temperature diode failure */
u8 fan[2]; /* Register value: TACH count for fans >=30 */
u8 status; /* Detected channel alarms and fan failures */
/* Register values only written to */
u8 pwm[2]; /* Register value: Duty cycle 0..120 */
u8 temp_therm[2]; /* THERM Temperature, 0..255 C (->_max) */
u8 temp_alert[2]; /* ALERT Temperature, 0..255 C (->_crit) */
u8 temp_ot[2]; /* OT Temperature, 0..255 C (->_emergency) */
/* Register values initialized only once */
u8 ppr; /* Pulses per rotation 0..3 for 1..4 ppr */
u8 rpm_range; /* Index in above rpm_ranges table */
};
static struct max6639_data *max6639_update_device(struct device *dev)
{
struct max6639_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
struct max6639_data *ret = data;
int i;
int status_reg;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
int res;
dev_dbg(&client->dev, "Starting max6639 update\n");
status_reg = i2c_smbus_read_byte_data(client,
MAX6639_REG_STATUS);
if (status_reg < 0) {
ret = ERR_PTR(status_reg);
goto abort;
}
data->status = status_reg;
for (i = 0; i < 2; i++) {
res = i2c_smbus_read_byte_data(client,
MAX6639_REG_FAN_CNT(i));
if (res < 0) {
ret = ERR_PTR(res);
goto abort;
}
data->fan[i] = res;
res = i2c_smbus_read_byte_data(client,
MAX6639_REG_TEMP_EXT(i));
if (res < 0) {
ret = ERR_PTR(res);
goto abort;
}
data->temp[i] = res >> 5;
data->temp_fault[i] = res & 0x01;
res = i2c_smbus_read_byte_data(client,
MAX6639_REG_TEMP(i));
if (res < 0) {
ret = ERR_PTR(res);
goto abort;
}
data->temp[i] |= res << 3;
}
data->last_updated = jiffies;
data->valid = 1;
}
abort:
mutex_unlock(&data->update_lock);
return ret;
}
static ssize_t temp_input_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
long temp;
struct max6639_data *data = max6639_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
if (IS_ERR(data))
return PTR_ERR(data);
temp = data->temp[attr->index] * 125;
return sprintf(buf, "%ld\n", temp);
}
static ssize_t temp_fault_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
struct max6639_data *data = max6639_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", data->temp_fault[attr->index]);
}
static ssize_t temp_max_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
}
static ssize_t temp_max_store(struct device *dev,
struct device_attribute *dev_attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int res;
res = kstrtoul(buf, 10, &val);
if (res)
return res;
mutex_lock(&data->update_lock);
data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
i2c_smbus_write_byte_data(client,
MAX6639_REG_THERM_LIMIT(attr->index),
data->temp_therm[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t temp_crit_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
}
static ssize_t temp_crit_store(struct device *dev,
struct device_attribute *dev_attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int res;
res = kstrtoul(buf, 10, &val);
if (res)
return res;
mutex_lock(&data->update_lock);
data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
i2c_smbus_write_byte_data(client,
MAX6639_REG_ALERT_LIMIT(attr->index),
data->temp_alert[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t temp_emergency_show(struct device *dev,
struct device_attribute *dev_attr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
}
static ssize_t temp_emergency_store(struct device *dev,
struct device_attribute *dev_attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int res;
res = kstrtoul(buf, 10, &val);
if (res)
return res;
mutex_lock(&data->update_lock);
data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
i2c_smbus_write_byte_data(client,
MAX6639_REG_OT_LIMIT(attr->index),
data->temp_ot[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t pwm_show(struct device *dev, struct device_attribute *dev_attr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120);
}
static ssize_t pwm_store(struct device *dev,
struct device_attribute *dev_attr, const char *buf,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long val;
int res;
res = kstrtoul(buf, 10, &val);
if (res)
return res;
val = clamp_val(val, 0, 255);
mutex_lock(&data->update_lock);
data->pwm[attr->index] = (u8)(val * 120 / 255);
i2c_smbus_write_byte_data(client,
MAX6639_REG_TARGTDUTY(attr->index),
data->pwm[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t fan_input_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
struct max6639_data *data = max6639_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
data->rpm_range));
}
static ssize_t alarm_show(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
struct max6639_data *data = max6639_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", !!(data->status & (1 << attr->index)));
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1);
static SENSOR_DEVICE_ATTR_RO(temp1_fault, temp_fault, 0);
static SENSOR_DEVICE_ATTR_RO(temp2_fault, temp_fault, 1);
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp_crit, 0);
static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp_crit, 1);
static SENSOR_DEVICE_ATTR_RW(temp1_emergency, temp_emergency, 0);
static SENSOR_DEVICE_ATTR_RW(temp2_emergency, temp_emergency, 1);
static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
static SENSOR_DEVICE_ATTR_RO(fan1_fault, alarm, 1);
static SENSOR_DEVICE_ATTR_RO(fan2_fault, alarm, 0);
static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 3);
static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 2);
static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 7);
static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 6);
static SENSOR_DEVICE_ATTR_RO(temp1_emergency_alarm, alarm, 5);
static SENSOR_DEVICE_ATTR_RO(temp2_emergency_alarm, alarm, 4);
static struct attribute *max6639_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp1_fault.dev_attr.attr,
&sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp1_emergency.dev_attr.attr,
&sensor_dev_attr_temp2_emergency.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan1_fault.dev_attr.attr,
&sensor_dev_attr_fan2_fault.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(max6639);
/*
* returns respective index in rpm_ranges table
* 1 by default on invalid range
*/
static int rpm_range_to_reg(int range)
{
int i;
for (i = 0; i < ARRAY_SIZE(rpm_ranges); i++) {
if (rpm_ranges[i] == range)
return i;
}
return 1; /* default: 4000 RPM */
}
static int max6639_init_client(struct i2c_client *client,
struct max6639_data *data)
{
struct max6639_platform_data *max6639_info =
dev_get_platdata(&client->dev);
int i;
int rpm_range = 1; /* default: 4000 RPM */
int err;
/* Reset chip to default values, see below for GCONFIG setup */
err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
MAX6639_GCONFIG_POR);
if (err)
goto exit;
/* Fans pulse per revolution is 2 by default */
if (max6639_info && max6639_info->ppr > 0 &&
max6639_info->ppr < 5)
data->ppr = max6639_info->ppr;
else
data->ppr = 2;
data->ppr -= 1;
if (max6639_info)
rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
data->rpm_range = rpm_range;
for (i = 0; i < 2; i++) {
/* Set Fan pulse per revolution */
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_PPR(i),
data->ppr << 6);
if (err)
goto exit;
/* Fans config PWM, RPM */
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG1(i),
MAX6639_FAN_CONFIG1_PWM | rpm_range);
if (err)
goto exit;
/* Fans PWM polarity high by default */
if (max6639_info && max6639_info->pwm_polarity == 0)
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG2a(i), 0x00);
else
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG2a(i), 0x02);
if (err)
goto exit;
/*
* /THERM full speed enable,
* PWM frequency 25kHz, see also GCONFIG below
*/
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG3(i),
MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
if (err)
goto exit;
/* Max. temp. 80C/90C/100C */
data->temp_therm[i] = 80;
data->temp_alert[i] = 90;
data->temp_ot[i] = 100;
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_THERM_LIMIT(i),
data->temp_therm[i]);
if (err)
goto exit;
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_ALERT_LIMIT(i),
data->temp_alert[i]);
if (err)
goto exit;
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
if (err)
goto exit;
/* PWM 120/120 (i.e. 100%) */
data->pwm[i] = 120;
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
if (err)
goto exit;
}
/* Start monitoring */
err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
MAX6639_GCONFIG_PWM_FREQ_HI);
exit:
return err;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int max6639_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
int dev_id, manu_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Actual detection via device and manufacturer ID */
dev_id = i2c_smbus_read_byte_data(client, MAX6639_REG_DEVID);
manu_id = i2c_smbus_read_byte_data(client, MAX6639_REG_MANUID);
if (dev_id != 0x58 || manu_id != 0x4D)
return -ENODEV;
strlcpy(info->type, "max6639", I2C_NAME_SIZE);
return 0;
}
static int max6639_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct max6639_data *data;
struct device *hwmon_dev;
int err;
data = devm_kzalloc(dev, sizeof(struct max6639_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
mutex_init(&data->update_lock);
/* Initialize the max6639 chip */
err = max6639_init_client(client, data);
if (err < 0)
return err;
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data,
max6639_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
#ifdef CONFIG_PM_SLEEP
static int max6639_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
if (data < 0)
return data;
return i2c_smbus_write_byte_data(client,
MAX6639_REG_GCONFIG, data | MAX6639_GCONFIG_STANDBY);
}
static int max6639_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
if (data < 0)
return data;
return i2c_smbus_write_byte_data(client,
MAX6639_REG_GCONFIG, data & ~MAX6639_GCONFIG_STANDBY);
}
#endif /* CONFIG_PM_SLEEP */
static const struct i2c_device_id max6639_id[] = {
{"max6639", 0},
{ }
};
MODULE_DEVICE_TABLE(i2c, max6639_id);
static SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend, max6639_resume);
static struct i2c_driver max6639_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "max6639",
.pm = &max6639_pm_ops,
},
.probe_new = max6639_probe,
.id_table = max6639_id,
.detect = max6639_detect,
.address_list = normal_i2c,
};
module_i2c_driver(max6639_driver);
MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
MODULE_DESCRIPTION("max6639 driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink