0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-15 06:55:13 +08:00
linux/drivers/video/fbdev/imxfb.c
Christophe JAILLET 767d724a16 video: fbdev: imxfb: Fix an error message
'ret' is known to be 0 here.
No error code is available, so just remove it from the error message.

Fixes: 72330b0eee ("i.MX Framebuffer: Use readl/writel instead of direct pointer deref")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d7b25026f82659da3c6f7159eea480faa9d738be.1620327302.git.christophe.jaillet@wanadoo.fr
2021-05-07 18:34:18 +02:00

1141 lines
26 KiB
C

/*
* Freescale i.MX Frame Buffer device driver
*
* Copyright (C) 2004 Sascha Hauer, Pengutronix
* Based on acornfb.c Copyright (C) Russell King.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
* Please direct your questions and comments on this driver to the following
* email address:
*
* linux-arm-kernel@lists.arm.linux.org.uk
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/lcd.h>
#include <linux/math64.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <video/of_display_timing.h>
#include <video/of_videomode.h>
#include <video/videomode.h>
#include <linux/platform_data/video-imxfb.h>
/*
* Complain if VAR is out of range.
*/
#define DEBUG_VAR 1
#define DRIVER_NAME "imx-fb"
#define LCDC_SSA 0x00
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
#define YMAX_MASK_IMX1 0x1ff
#define YMAX_MASK_IMX21 0x3ff
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
#define LCDC_CPOS 0x0C
#define CPOS_CC1 (1<<31)
#define CPOS_CC0 (1<<30)
#define CPOS_OP (1<<28)
#define CPOS_CXP(x) (((x) & 3ff) << 16)
#define LCDC_LCWHB 0x10
#define LCWHB_BK_EN (1<<31)
#define LCWHB_CW(w) (((w) & 0x1f) << 24)
#define LCWHB_CH(h) (((h) & 0x1f) << 16)
#define LCWHB_BD(x) ((x) & 0xff)
#define LCDC_LCHCC 0x14
#define LCDC_PCR 0x18
#define LCDC_HCR 0x1C
#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
#define HCR_H_WAIT_2(x) ((x) & 0xff)
#define LCDC_VCR 0x20
#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
#define VCR_V_WAIT_2(x) ((x) & 0xff)
#define LCDC_POS 0x24
#define POS_POS(x) ((x) & 1f)
#define LCDC_LSCR1 0x28
/* bit fields in imxfb.h */
#define LCDC_PWMR 0x2C
/* bit fields in imxfb.h */
#define LCDC_DMACR 0x30
/* bit fields in imxfb.h */
#define LCDC_RMCR 0x34
#define RMCR_LCDC_EN_MX1 (1<<1)
#define RMCR_SELF_REF (1<<0)
#define LCDC_LCDICR 0x38
#define LCDICR_INT_SYN (1<<2)
#define LCDICR_INT_CON (1)
#define LCDC_LCDISR 0x40
#define LCDISR_UDR_ERR (1<<3)
#define LCDISR_ERR_RES (1<<2)
#define LCDISR_EOF (1<<1)
#define LCDISR_BOF (1<<0)
#define IMXFB_LSCR1_DEFAULT 0x00120300
#define LCDC_LAUSCR 0x80
#define LAUSCR_AUS_MODE (1<<31)
/* Used fb-mode. Can be set on kernel command line, therefore file-static. */
static const char *fb_mode;
/*
* These are the bitfields for each
* display depth that we support.
*/
struct imxfb_rgb {
struct fb_bitfield red;
struct fb_bitfield green;
struct fb_bitfield blue;
struct fb_bitfield transp;
};
enum imxfb_type {
IMX1_FB,
IMX21_FB,
};
struct imxfb_info {
struct platform_device *pdev;
void __iomem *regs;
struct clk *clk_ipg;
struct clk *clk_ahb;
struct clk *clk_per;
enum imxfb_type devtype;
bool enabled;
/*
* These are the addresses we mapped
* the framebuffer memory region to.
*/
dma_addr_t map_dma;
u_int map_size;
u_int palette_size;
dma_addr_t dbar1;
dma_addr_t dbar2;
u_int pcr;
u_int lauscr;
u_int pwmr;
u_int lscr1;
u_int dmacr;
bool cmap_inverse;
bool cmap_static;
struct imx_fb_videomode *mode;
int num_modes;
struct regulator *lcd_pwr;
int lcd_pwr_enabled;
};
static const struct platform_device_id imxfb_devtype[] = {
{
.name = "imx1-fb",
.driver_data = IMX1_FB,
}, {
.name = "imx21-fb",
.driver_data = IMX21_FB,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, imxfb_devtype);
static const struct of_device_id imxfb_of_dev_id[] = {
{
.compatible = "fsl,imx1-fb",
.data = &imxfb_devtype[IMX1_FB],
}, {
.compatible = "fsl,imx21-fb",
.data = &imxfb_devtype[IMX21_FB],
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, imxfb_of_dev_id);
static inline int is_imx1_fb(struct imxfb_info *fbi)
{
return fbi->devtype == IMX1_FB;
}
#define IMX_NAME "IMX"
/*
* Minimum X and Y resolutions
*/
#define MIN_XRES 64
#define MIN_YRES 64
/* Actually this really is 18bit support, the lowest 2 bits of each colour
* are unused in hardware. We claim to have 24bit support to make software
* like X work, which does not support 18bit.
*/
static struct imxfb_rgb def_rgb_18 = {
.red = {.offset = 16, .length = 8,},
.green = {.offset = 8, .length = 8,},
.blue = {.offset = 0, .length = 8,},
.transp = {.offset = 0, .length = 0,},
};
static struct imxfb_rgb def_rgb_16_tft = {
.red = {.offset = 11, .length = 5,},
.green = {.offset = 5, .length = 6,},
.blue = {.offset = 0, .length = 5,},
.transp = {.offset = 0, .length = 0,},
};
static struct imxfb_rgb def_rgb_16_stn = {
.red = {.offset = 8, .length = 4,},
.green = {.offset = 4, .length = 4,},
.blue = {.offset = 0, .length = 4,},
.transp = {.offset = 0, .length = 0,},
};
static struct imxfb_rgb def_rgb_8 = {
.red = {.offset = 0, .length = 8,},
.green = {.offset = 0, .length = 8,},
.blue = {.offset = 0, .length = 8,},
.transp = {.offset = 0, .length = 0,},
};
static int imxfb_activate_var(struct fb_var_screeninfo *var,
struct fb_info *info);
static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
{
chan &= 0xffff;
chan >>= 16 - bf->length;
return chan << bf->offset;
}
static int imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
u_int trans, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
u_int val, ret = 1;
#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
if (regno < fbi->palette_size) {
val = (CNVT_TOHW(red, 4) << 8) |
(CNVT_TOHW(green,4) << 4) |
CNVT_TOHW(blue, 4);
writel(val, fbi->regs + 0x800 + (regno << 2));
ret = 0;
}
return ret;
}
static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int trans, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
unsigned int val;
int ret = 1;
/*
* If inverse mode was selected, invert all the colours
* rather than the register number. The register number
* is what you poke into the framebuffer to produce the
* colour you requested.
*/
if (fbi->cmap_inverse) {
red = 0xffff - red;
green = 0xffff - green;
blue = 0xffff - blue;
}
/*
* If greyscale is true, then we convert the RGB value
* to greyscale no mater what visual we are using.
*/
if (info->var.grayscale)
red = green = blue = (19595 * red + 38470 * green +
7471 * blue) >> 16;
switch (info->fix.visual) {
case FB_VISUAL_TRUECOLOR:
/*
* 12 or 16-bit True Colour. We encode the RGB value
* according to the RGB bitfield information.
*/
if (regno < 16) {
u32 *pal = info->pseudo_palette;
val = chan_to_field(red, &info->var.red);
val |= chan_to_field(green, &info->var.green);
val |= chan_to_field(blue, &info->var.blue);
pal[regno] = val;
ret = 0;
}
break;
case FB_VISUAL_STATIC_PSEUDOCOLOR:
case FB_VISUAL_PSEUDOCOLOR:
ret = imxfb_setpalettereg(regno, red, green, blue, trans, info);
break;
}
return ret;
}
static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
{
struct imx_fb_videomode *m;
int i;
if (!fb_mode)
return &fbi->mode[0];
for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
if (!strcmp(m->mode.name, fb_mode))
return m;
}
return NULL;
}
/*
* imxfb_check_var():
* Round up in the following order: bits_per_pixel, xres,
* yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
* bitfields, horizontal timing, vertical timing.
*/
static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
struct imxfb_rgb *rgb;
const struct imx_fb_videomode *imxfb_mode;
unsigned long lcd_clk;
unsigned long long tmp;
u32 pcr = 0;
if (var->xres < MIN_XRES)
var->xres = MIN_XRES;
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
imxfb_mode = imxfb_find_mode(fbi);
if (!imxfb_mode)
return -EINVAL;
var->xres = imxfb_mode->mode.xres;
var->yres = imxfb_mode->mode.yres;
var->bits_per_pixel = imxfb_mode->bpp;
var->pixclock = imxfb_mode->mode.pixclock;
var->hsync_len = imxfb_mode->mode.hsync_len;
var->left_margin = imxfb_mode->mode.left_margin;
var->right_margin = imxfb_mode->mode.right_margin;
var->vsync_len = imxfb_mode->mode.vsync_len;
var->upper_margin = imxfb_mode->mode.upper_margin;
var->lower_margin = imxfb_mode->mode.lower_margin;
var->sync = imxfb_mode->mode.sync;
var->xres_virtual = max(var->xres_virtual, var->xres);
var->yres_virtual = max(var->yres_virtual, var->yres);
pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
lcd_clk = clk_get_rate(fbi->clk_per);
tmp = var->pixclock * (unsigned long long)lcd_clk;
do_div(tmp, 1000000);
if (do_div(tmp, 1000000) > 500000)
tmp++;
pcr = (unsigned int)tmp;
if (--pcr > 0x3F) {
pcr = 0x3F;
printk(KERN_WARNING "Must limit pixel clock to %luHz\n",
lcd_clk / pcr);
}
switch (var->bits_per_pixel) {
case 32:
pcr |= PCR_BPIX_18;
rgb = &def_rgb_18;
break;
case 16:
default:
if (is_imx1_fb(fbi))
pcr |= PCR_BPIX_12;
else
pcr |= PCR_BPIX_16;
if (imxfb_mode->pcr & PCR_TFT)
rgb = &def_rgb_16_tft;
else
rgb = &def_rgb_16_stn;
break;
case 8:
pcr |= PCR_BPIX_8;
rgb = &def_rgb_8;
break;
}
/* add sync polarities */
pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25));
fbi->pcr = pcr;
/*
* The LCDC AUS Mode Control Register does not exist on imx1.
*/
if (!is_imx1_fb(fbi) && imxfb_mode->aus_mode)
fbi->lauscr = LAUSCR_AUS_MODE;
/*
* Copy the RGB parameters for this display
* from the machine specific parameters.
*/
var->red = rgb->red;
var->green = rgb->green;
var->blue = rgb->blue;
var->transp = rgb->transp;
pr_debug("RGBT length = %d:%d:%d:%d\n",
var->red.length, var->green.length, var->blue.length,
var->transp.length);
pr_debug("RGBT offset = %d:%d:%d:%d\n",
var->red.offset, var->green.offset, var->blue.offset,
var->transp.offset);
return 0;
}
/*
* imxfb_set_par():
* Set the user defined part of the display for the specified console
*/
static int imxfb_set_par(struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32)
info->fix.visual = FB_VISUAL_TRUECOLOR;
else if (!fbi->cmap_static)
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
else {
/*
* Some people have weird ideas about wanting static
* pseudocolor maps. I suspect their user space
* applications are broken.
*/
info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
}
info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
imxfb_activate_var(var, info);
return 0;
}
static int imxfb_enable_controller(struct imxfb_info *fbi)
{
int ret;
if (fbi->enabled)
return 0;
pr_debug("Enabling LCD controller\n");
writel(fbi->map_dma, fbi->regs + LCDC_SSA);
/* panning offset 0 (0 pixel offset) */
writel(0x00000000, fbi->regs + LCDC_POS);
/* disable hardware cursor */
writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1),
fbi->regs + LCDC_CPOS);
/*
* RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt
* on other SoCs
*/
writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
ret = clk_prepare_enable(fbi->clk_ipg);
if (ret)
goto err_enable_ipg;
ret = clk_prepare_enable(fbi->clk_ahb);
if (ret)
goto err_enable_ahb;
ret = clk_prepare_enable(fbi->clk_per);
if (ret)
goto err_enable_per;
fbi->enabled = true;
return 0;
err_enable_per:
clk_disable_unprepare(fbi->clk_ahb);
err_enable_ahb:
clk_disable_unprepare(fbi->clk_ipg);
err_enable_ipg:
writel(0, fbi->regs + LCDC_RMCR);
return ret;
}
static void imxfb_disable_controller(struct imxfb_info *fbi)
{
if (!fbi->enabled)
return;
pr_debug("Disabling LCD controller\n");
clk_disable_unprepare(fbi->clk_per);
clk_disable_unprepare(fbi->clk_ahb);
clk_disable_unprepare(fbi->clk_ipg);
fbi->enabled = false;
writel(0, fbi->regs + LCDC_RMCR);
}
static int imxfb_blank(int blank, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
pr_debug("imxfb_blank: blank=%d\n", blank);
switch (blank) {
case FB_BLANK_POWERDOWN:
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_NORMAL:
imxfb_disable_controller(fbi);
break;
case FB_BLANK_UNBLANK:
return imxfb_enable_controller(fbi);
}
return 0;
}
static const struct fb_ops imxfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = imxfb_check_var,
.fb_set_par = imxfb_set_par,
.fb_setcolreg = imxfb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = imxfb_blank,
};
/*
* imxfb_activate_var():
* Configures LCD Controller based on entries in var parameter. Settings are
* only written to the controller if changes were made.
*/
static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21;
pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
var->left_margin, var->right_margin);
pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n",
var->yres, var->vsync_len,
var->upper_margin, var->lower_margin);
#if DEBUG_VAR
if (var->xres < 16 || var->xres > 1024)
printk(KERN_ERR "%s: invalid xres %d\n",
info->fix.id, var->xres);
if (var->hsync_len < 1 || var->hsync_len > 64)
printk(KERN_ERR "%s: invalid hsync_len %d\n",
info->fix.id, var->hsync_len);
if (var->left_margin > 255)
printk(KERN_ERR "%s: invalid left_margin %d\n",
info->fix.id, var->left_margin);
if (var->right_margin > 255)
printk(KERN_ERR "%s: invalid right_margin %d\n",
info->fix.id, var->right_margin);
if (var->yres < 1 || var->yres > ymax_mask)
printk(KERN_ERR "%s: invalid yres %d\n",
info->fix.id, var->yres);
if (var->vsync_len > 100)
printk(KERN_ERR "%s: invalid vsync_len %d\n",
info->fix.id, var->vsync_len);
if (var->upper_margin > 63)
printk(KERN_ERR "%s: invalid upper_margin %d\n",
info->fix.id, var->upper_margin);
if (var->lower_margin > 255)
printk(KERN_ERR "%s: invalid lower_margin %d\n",
info->fix.id, var->lower_margin);
#endif
/* physical screen start address */
writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4),
fbi->regs + LCDC_VPW);
writel(HCR_H_WIDTH(var->hsync_len - 1) |
HCR_H_WAIT_1(var->right_margin - 1) |
HCR_H_WAIT_2(var->left_margin - 3),
fbi->regs + LCDC_HCR);
writel(VCR_V_WIDTH(var->vsync_len) |
VCR_V_WAIT_1(var->lower_margin) |
VCR_V_WAIT_2(var->upper_margin),
fbi->regs + LCDC_VCR);
writel(SIZE_XMAX(var->xres) | (var->yres & ymax_mask),
fbi->regs + LCDC_SIZE);
writel(fbi->pcr, fbi->regs + LCDC_PCR);
if (fbi->pwmr)
writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
/* dmacr = 0 is no valid value, as we need DMA control marks. */
if (fbi->dmacr)
writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
if (fbi->lauscr)
writel(fbi->lauscr, fbi->regs + LCDC_LAUSCR);
return 0;
}
static int imxfb_init_fbinfo(struct platform_device *pdev)
{
struct imx_fb_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct fb_info *info = platform_get_drvdata(pdev);
struct imxfb_info *fbi = info->par;
struct device_node *np;
pr_debug("%s\n",__func__);
info->pseudo_palette = kmalloc_array(16, sizeof(u32), GFP_KERNEL);
if (!info->pseudo_palette)
return -ENOMEM;
memset(fbi, 0, sizeof(struct imxfb_info));
fbi->devtype = pdev->id_entry->driver_data;
strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id));
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.type_aux = 0;
info->fix.xpanstep = 0;
info->fix.ypanstep = 0;
info->fix.ywrapstep = 0;
info->fix.accel = FB_ACCEL_NONE;
info->var.nonstd = 0;
info->var.activate = FB_ACTIVATE_NOW;
info->var.height = -1;
info->var.width = -1;
info->var.accel_flags = 0;
info->var.vmode = FB_VMODE_NONINTERLACED;
info->fbops = &imxfb_ops;
info->flags = FBINFO_FLAG_DEFAULT |
FBINFO_READS_FAST;
if (pdata) {
fbi->lscr1 = pdata->lscr1;
fbi->dmacr = pdata->dmacr;
fbi->pwmr = pdata->pwmr;
} else {
np = pdev->dev.of_node;
info->var.grayscale = of_property_read_bool(np,
"cmap-greyscale");
fbi->cmap_inverse = of_property_read_bool(np, "cmap-inverse");
fbi->cmap_static = of_property_read_bool(np, "cmap-static");
fbi->lscr1 = IMXFB_LSCR1_DEFAULT;
of_property_read_u32(np, "fsl,lpccr", &fbi->pwmr);
of_property_read_u32(np, "fsl,lscr1", &fbi->lscr1);
of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr);
}
return 0;
}
static int imxfb_of_read_mode(struct device *dev, struct device_node *np,
struct imx_fb_videomode *imxfb_mode)
{
int ret;
struct fb_videomode *of_mode = &imxfb_mode->mode;
u32 bpp;
u32 pcr;
ret = of_property_read_string(np, "model", &of_mode->name);
if (ret)
of_mode->name = NULL;
ret = of_get_fb_videomode(np, of_mode, OF_USE_NATIVE_MODE);
if (ret) {
dev_err(dev, "Failed to get videomode from DT\n");
return ret;
}
ret = of_property_read_u32(np, "bits-per-pixel", &bpp);
ret |= of_property_read_u32(np, "fsl,pcr", &pcr);
if (ret) {
dev_err(dev, "Failed to read bpp and pcr from DT\n");
return -EINVAL;
}
if (bpp < 1 || bpp > 255) {
dev_err(dev, "Bits per pixel have to be between 1 and 255\n");
return -EINVAL;
}
imxfb_mode->bpp = bpp;
imxfb_mode->pcr = pcr;
/*
* fsl,aus-mode is optional
*/
imxfb_mode->aus_mode = of_property_read_bool(np, "fsl,aus-mode");
return 0;
}
static int imxfb_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi)
{
struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
if (!fi || fi->par == fbi)
return 1;
return 0;
}
static int imxfb_lcd_get_contrast(struct lcd_device *lcddev)
{
struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
return fbi->pwmr & 0xff;
}
static int imxfb_lcd_set_contrast(struct lcd_device *lcddev, int contrast)
{
struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
if (fbi->pwmr && fbi->enabled) {
if (contrast > 255)
contrast = 255;
else if (contrast < 0)
contrast = 0;
fbi->pwmr &= ~0xff;
fbi->pwmr |= contrast;
writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
}
return 0;
}
static int imxfb_lcd_get_power(struct lcd_device *lcddev)
{
struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
if (!IS_ERR(fbi->lcd_pwr) &&
!regulator_is_enabled(fbi->lcd_pwr))
return FB_BLANK_POWERDOWN;
return FB_BLANK_UNBLANK;
}
static int imxfb_regulator_set(struct imxfb_info *fbi, int enable)
{
int ret;
if (enable == fbi->lcd_pwr_enabled)
return 0;
if (enable)
ret = regulator_enable(fbi->lcd_pwr);
else
ret = regulator_disable(fbi->lcd_pwr);
if (ret == 0)
fbi->lcd_pwr_enabled = enable;
return ret;
}
static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power)
{
struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev);
if (!IS_ERR(fbi->lcd_pwr))
return imxfb_regulator_set(fbi, power == FB_BLANK_UNBLANK);
return 0;
}
static struct lcd_ops imxfb_lcd_ops = {
.check_fb = imxfb_lcd_check_fb,
.get_contrast = imxfb_lcd_get_contrast,
.set_contrast = imxfb_lcd_set_contrast,
.get_power = imxfb_lcd_get_power,
.set_power = imxfb_lcd_set_power,
};
static int imxfb_setup(void)
{
char *opt, *options = NULL;
if (fb_get_options("imxfb", &options))
return -ENODEV;
if (!options || !*options)
return 0;
while ((opt = strsep(&options, ",")) != NULL) {
if (!*opt)
continue;
else
fb_mode = opt;
}
return 0;
}
static int imxfb_probe(struct platform_device *pdev)
{
struct imxfb_info *fbi;
struct lcd_device *lcd;
struct fb_info *info;
struct imx_fb_platform_data *pdata;
struct resource *res;
struct imx_fb_videomode *m;
const struct of_device_id *of_id;
int ret, i;
int bytes_per_pixel;
dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
ret = imxfb_setup();
if (ret < 0)
return ret;
of_id = of_match_device(imxfb_of_dev_id, &pdev->dev);
if (of_id)
pdev->id_entry = of_id->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
pdata = dev_get_platdata(&pdev->dev);
info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev);
if (!info)
return -ENOMEM;
fbi = info->par;
platform_set_drvdata(pdev, info);
ret = imxfb_init_fbinfo(pdev);
if (ret < 0)
goto failed_init;
if (pdata) {
if (!fb_mode)
fb_mode = pdata->mode[0].mode.name;
fbi->mode = pdata->mode;
fbi->num_modes = pdata->num_modes;
} else {
struct device_node *display_np;
fb_mode = NULL;
display_np = of_parse_phandle(pdev->dev.of_node, "display", 0);
if (!display_np) {
dev_err(&pdev->dev, "No display defined in devicetree\n");
ret = -EINVAL;
goto failed_of_parse;
}
/*
* imxfb does not support more modes, we choose only the native
* mode.
*/
fbi->num_modes = 1;
fbi->mode = devm_kzalloc(&pdev->dev,
sizeof(struct imx_fb_videomode), GFP_KERNEL);
if (!fbi->mode) {
ret = -ENOMEM;
goto failed_of_parse;
}
ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode);
if (ret)
goto failed_of_parse;
}
/* Calculate maximum bytes used per pixel. In most cases this should
* be the same as m->bpp/8 */
m = &fbi->mode[0];
bytes_per_pixel = (m->bpp + 7) / 8;
for (i = 0; i < fbi->num_modes; i++, m++)
info->fix.smem_len = max_t(size_t, info->fix.smem_len,
m->mode.xres * m->mode.yres * bytes_per_pixel);
res = request_mem_region(res->start, resource_size(res),
DRIVER_NAME);
if (!res) {
ret = -EBUSY;
goto failed_req;
}
fbi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(fbi->clk_ipg)) {
ret = PTR_ERR(fbi->clk_ipg);
goto failed_getclock;
}
/*
* The LCDC controller does not have an enable bit. The
* controller starts directly when the clocks are enabled.
* If the clocks are enabled when the controller is not yet
* programmed with proper register values (enabled at the
* bootloader, for example) then it just goes into some undefined
* state.
* To avoid this issue, let's enable and disable LCDC IPG clock
* so that we force some kind of 'reset' to the LCDC block.
*/
ret = clk_prepare_enable(fbi->clk_ipg);
if (ret)
goto failed_getclock;
clk_disable_unprepare(fbi->clk_ipg);
fbi->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(fbi->clk_ahb)) {
ret = PTR_ERR(fbi->clk_ahb);
goto failed_getclock;
}
fbi->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(fbi->clk_per)) {
ret = PTR_ERR(fbi->clk_per);
goto failed_getclock;
}
fbi->regs = ioremap(res->start, resource_size(res));
if (fbi->regs == NULL) {
dev_err(&pdev->dev, "Cannot map frame buffer registers\n");
ret = -ENOMEM;
goto failed_ioremap;
}
fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
info->screen_buffer = dma_alloc_wc(&pdev->dev, fbi->map_size,
&fbi->map_dma, GFP_KERNEL);
if (!info->screen_buffer) {
dev_err(&pdev->dev, "Failed to allocate video RAM\n");
ret = -ENOMEM;
goto failed_map;
}
info->fix.smem_start = fbi->map_dma;
if (pdata && pdata->init) {
ret = pdata->init(fbi->pdev);
if (ret)
goto failed_platform_init;
}
INIT_LIST_HEAD(&info->modelist);
for (i = 0; i < fbi->num_modes; i++)
fb_add_videomode(&fbi->mode[i].mode, &info->modelist);
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
*/
imxfb_check_var(&info->var, info);
/*
* For modes > 8bpp, the color map is bypassed.
* Therefore, 256 entries are enough.
*/
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret < 0)
goto failed_cmap;
imxfb_set_par(info);
ret = register_framebuffer(info);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register framebuffer\n");
goto failed_register;
}
fbi->lcd_pwr = devm_regulator_get(&pdev->dev, "lcd");
if (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto failed_lcd;
}
lcd = devm_lcd_device_register(&pdev->dev, "imxfb-lcd", &pdev->dev, fbi,
&imxfb_lcd_ops);
if (IS_ERR(lcd)) {
ret = PTR_ERR(lcd);
goto failed_lcd;
}
lcd->props.max_contrast = 0xff;
imxfb_enable_controller(fbi);
fbi->pdev = pdev;
return 0;
failed_lcd:
unregister_framebuffer(info);
failed_register:
fb_dealloc_cmap(&info->cmap);
failed_cmap:
if (pdata && pdata->exit)
pdata->exit(fbi->pdev);
failed_platform_init:
dma_free_wc(&pdev->dev, fbi->map_size, info->screen_buffer,
fbi->map_dma);
failed_map:
iounmap(fbi->regs);
failed_ioremap:
failed_getclock:
release_mem_region(res->start, resource_size(res));
failed_req:
failed_of_parse:
kfree(info->pseudo_palette);
failed_init:
framebuffer_release(info);
return ret;
}
static int imxfb_remove(struct platform_device *pdev)
{
struct imx_fb_platform_data *pdata;
struct fb_info *info = platform_get_drvdata(pdev);
struct imxfb_info *fbi = info->par;
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
imxfb_disable_controller(fbi);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
pdata = dev_get_platdata(&pdev->dev);
if (pdata && pdata->exit)
pdata->exit(fbi->pdev);
dma_free_wc(&pdev->dev, fbi->map_size, info->screen_buffer,
fbi->map_dma);
iounmap(fbi->regs);
release_mem_region(res->start, resource_size(res));
kfree(info->pseudo_palette);
framebuffer_release(info);
return 0;
}
static int __maybe_unused imxfb_suspend(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct imxfb_info *fbi = info->par;
imxfb_disable_controller(fbi);
return 0;
}
static int __maybe_unused imxfb_resume(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct imxfb_info *fbi = info->par;
imxfb_enable_controller(fbi);
return 0;
}
static SIMPLE_DEV_PM_OPS(imxfb_pm_ops, imxfb_suspend, imxfb_resume);
static struct platform_driver imxfb_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = imxfb_of_dev_id,
.pm = &imxfb_pm_ops,
},
.probe = imxfb_probe,
.remove = imxfb_remove,
.id_table = imxfb_devtype,
};
module_platform_driver(imxfb_driver);
MODULE_DESCRIPTION("Freescale i.MX framebuffer driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");