mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 16:14:25 +08:00
92f7a35836
The 104-DIO-48E features an 8254 Counter/Timer chip providing three counter/timers which can be used for frequency measurement, frequency output, pulse width modulation, pulse width measurement, event count, etc. The counter/timers use the same addresses as PPI 0 (addresses 0x0 to 0x3), so a raw_spinlock_t is used to synchronize operations between the two regmap mappings to prevent clobbering. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
343 lines
10 KiB
C
343 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* GPIO driver for the ACCES 104-DIO-48E series
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This driver supports the following ACCES devices: 104-DIO-48E and
|
|
* 104-DIO-24E.
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i8254.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "gpio-i8255.h"
|
|
|
|
MODULE_IMPORT_NS(I8255);
|
|
|
|
#define DIO48E_EXTENT 16
|
|
#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_DIO48E];
|
|
static unsigned int num_dio48e;
|
|
module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
|
|
MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
|
|
|
|
static unsigned int irq[MAX_NUM_DIO48E];
|
|
static unsigned int num_irq;
|
|
module_param_hw_array(irq, uint, irq, &num_irq, 0);
|
|
MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
|
|
|
|
#define DIO48E_ENABLE_INTERRUPT 0xB
|
|
#define DIO48E_DISABLE_INTERRUPT DIO48E_ENABLE_INTERRUPT
|
|
#define DIO48E_ENABLE_COUNTER_TIMER_ADDRESSING 0xD
|
|
#define DIO48E_DISABLE_COUNTER_TIMER_ADDRESSING DIO48E_ENABLE_COUNTER_TIMER_ADDRESSING
|
|
#define DIO48E_CLEAR_INTERRUPT 0xF
|
|
|
|
#define DIO48E_NUM_PPI 2
|
|
|
|
static const struct regmap_range dio48e_wr_ranges[] = {
|
|
regmap_reg_range(0x0, 0x9), regmap_reg_range(0xB, 0xB),
|
|
regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF),
|
|
};
|
|
static const struct regmap_range dio48e_rd_ranges[] = {
|
|
regmap_reg_range(0x0, 0x2), regmap_reg_range(0x4, 0x6),
|
|
regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD),
|
|
regmap_reg_range(0xF, 0xF),
|
|
};
|
|
static const struct regmap_range dio48e_volatile_ranges[] = {
|
|
i8255_volatile_regmap_range(0x0), i8255_volatile_regmap_range(0x4),
|
|
regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD),
|
|
regmap_reg_range(0xF, 0xF),
|
|
};
|
|
static const struct regmap_range dio48e_precious_ranges[] = {
|
|
regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD),
|
|
regmap_reg_range(0xF, 0xF),
|
|
};
|
|
static const struct regmap_access_table dio48e_wr_table = {
|
|
.yes_ranges = dio48e_wr_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(dio48e_wr_ranges),
|
|
};
|
|
static const struct regmap_access_table dio48e_rd_table = {
|
|
.yes_ranges = dio48e_rd_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(dio48e_rd_ranges),
|
|
};
|
|
static const struct regmap_access_table dio48e_volatile_table = {
|
|
.yes_ranges = dio48e_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(dio48e_volatile_ranges),
|
|
};
|
|
static const struct regmap_access_table dio48e_precious_table = {
|
|
.yes_ranges = dio48e_precious_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(dio48e_precious_ranges),
|
|
};
|
|
|
|
static const struct regmap_range pit_wr_ranges[] = {
|
|
regmap_reg_range(0x0, 0x3),
|
|
};
|
|
static const struct regmap_range pit_rd_ranges[] = {
|
|
regmap_reg_range(0x0, 0x2),
|
|
};
|
|
static const struct regmap_access_table pit_wr_table = {
|
|
.yes_ranges = pit_wr_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(pit_wr_ranges),
|
|
};
|
|
static const struct regmap_access_table pit_rd_table = {
|
|
.yes_ranges = pit_rd_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(pit_rd_ranges),
|
|
};
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
#define DIO48E_REGMAP_IRQ(_ppi) \
|
|
[19 + (_ppi) * 24] = { \
|
|
.mask = BIT(_ppi), \
|
|
.type = { .types_supported = IRQ_TYPE_EDGE_RISING }, \
|
|
}
|
|
|
|
static const struct regmap_irq dio48e_regmap_irqs[] = {
|
|
DIO48E_REGMAP_IRQ(0), DIO48E_REGMAP_IRQ(1),
|
|
};
|
|
|
|
/**
|
|
* struct dio48e_gpio - GPIO device private data structure
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @map: Regmap for the device
|
|
* @regs: virtual mapping for device registers
|
|
* @flags: IRQ flags saved during locking
|
|
* @irq_mask: Current IRQ mask state on the device
|
|
*/
|
|
struct dio48e_gpio {
|
|
raw_spinlock_t lock;
|
|
struct regmap *map;
|
|
void __iomem *regs;
|
|
unsigned long flags;
|
|
unsigned int irq_mask;
|
|
};
|
|
|
|
static void dio48e_regmap_lock(void *lock_arg) __acquires(&dio48egpio->lock)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = lock_arg;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
dio48egpio->flags = flags;
|
|
}
|
|
|
|
static void dio48e_regmap_unlock(void *lock_arg) __releases(&dio48egpio->lock)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = lock_arg;
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, dio48egpio->flags);
|
|
}
|
|
|
|
static void pit_regmap_lock(void *lock_arg) __acquires(&dio48egpio->lock)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = lock_arg;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
dio48egpio->flags = flags;
|
|
|
|
iowrite8(0x00, dio48egpio->regs + DIO48E_ENABLE_COUNTER_TIMER_ADDRESSING);
|
|
}
|
|
|
|
static void pit_regmap_unlock(void *lock_arg) __releases(&dio48egpio->lock)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = lock_arg;
|
|
|
|
ioread8(dio48egpio->regs + DIO48E_DISABLE_COUNTER_TIMER_ADDRESSING);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, dio48egpio->flags);
|
|
}
|
|
|
|
static int dio48e_handle_mask_sync(const int index,
|
|
const unsigned int mask_buf_def,
|
|
const unsigned int mask_buf,
|
|
void *const irq_drv_data)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = irq_drv_data;
|
|
const unsigned int prev_mask = dio48egpio->irq_mask;
|
|
int err;
|
|
unsigned int val;
|
|
|
|
/* exit early if no change since the previous mask */
|
|
if (mask_buf == prev_mask)
|
|
return 0;
|
|
|
|
/* remember the current mask for the next mask sync */
|
|
dio48egpio->irq_mask = mask_buf;
|
|
|
|
/* if all previously masked, enable interrupts when unmasking */
|
|
if (prev_mask == mask_buf_def) {
|
|
err = regmap_write(dio48egpio->map, DIO48E_CLEAR_INTERRUPT, 0x00);
|
|
if (err)
|
|
return err;
|
|
return regmap_write(dio48egpio->map, DIO48E_ENABLE_INTERRUPT, 0x00);
|
|
}
|
|
|
|
/* if all are currently masked, disable interrupts */
|
|
if (mask_buf == mask_buf_def)
|
|
return regmap_read(dio48egpio->map, DIO48E_DISABLE_INTERRUPT, &val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DIO48E_NGPIO 48
|
|
static const char *dio48e_names[DIO48E_NGPIO] = {
|
|
"PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2",
|
|
"PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5",
|
|
"PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0",
|
|
"PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3",
|
|
"PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6",
|
|
"PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1",
|
|
"PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4",
|
|
"PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7",
|
|
"PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2",
|
|
"PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5",
|
|
"PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0",
|
|
"PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3",
|
|
"PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6",
|
|
"PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1",
|
|
"PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4",
|
|
"PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7"
|
|
};
|
|
|
|
static int dio48e_irq_init_hw(struct regmap *const map)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* Disable IRQ by default */
|
|
return regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val);
|
|
}
|
|
|
|
static int dio48e_probe(struct device *dev, unsigned int id)
|
|
{
|
|
const char *const name = dev_name(dev);
|
|
struct i8255_regmap_config config = {};
|
|
void __iomem *regs;
|
|
struct regmap *map;
|
|
struct regmap_config dio48e_regmap_config;
|
|
struct regmap_config pit_regmap_config;
|
|
struct i8254_regmap_config pit_config;
|
|
int err;
|
|
struct regmap_irq_chip *chip;
|
|
struct dio48e_gpio *dio48egpio;
|
|
struct regmap_irq_chip_data *chip_data;
|
|
|
|
if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + DIO48E_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL);
|
|
if (!dio48egpio)
|
|
return -ENOMEM;
|
|
|
|
regs = devm_ioport_map(dev, base[id], DIO48E_EXTENT);
|
|
if (!regs)
|
|
return -ENOMEM;
|
|
|
|
dio48egpio->regs = regs;
|
|
|
|
raw_spin_lock_init(&dio48egpio->lock);
|
|
|
|
dio48e_regmap_config = (struct regmap_config) {
|
|
.reg_bits = 8,
|
|
.reg_stride = 1,
|
|
.val_bits = 8,
|
|
.lock = dio48e_regmap_lock,
|
|
.unlock = dio48e_regmap_unlock,
|
|
.lock_arg = dio48egpio,
|
|
.io_port = true,
|
|
.wr_table = &dio48e_wr_table,
|
|
.rd_table = &dio48e_rd_table,
|
|
.volatile_table = &dio48e_volatile_table,
|
|
.precious_table = &dio48e_precious_table,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
map = devm_regmap_init_mmio(dev, regs, &dio48e_regmap_config);
|
|
if (IS_ERR(map))
|
|
return dev_err_probe(dev, PTR_ERR(map),
|
|
"Unable to initialize register map\n");
|
|
|
|
dio48egpio->map = map;
|
|
|
|
pit_regmap_config = (struct regmap_config) {
|
|
.name = "i8254",
|
|
.reg_bits = 8,
|
|
.reg_stride = 1,
|
|
.val_bits = 8,
|
|
.lock = pit_regmap_lock,
|
|
.unlock = pit_regmap_unlock,
|
|
.lock_arg = dio48egpio,
|
|
.io_port = true,
|
|
.wr_table = &pit_wr_table,
|
|
.rd_table = &pit_rd_table,
|
|
};
|
|
|
|
pit_config.map = devm_regmap_init_mmio(dev, regs, &pit_regmap_config);
|
|
if (IS_ERR(pit_config.map))
|
|
return dev_err_probe(dev, PTR_ERR(pit_config.map),
|
|
"Unable to initialize i8254 register map\n");
|
|
|
|
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->name = name;
|
|
chip->mask_base = DIO48E_ENABLE_INTERRUPT;
|
|
chip->ack_base = DIO48E_CLEAR_INTERRUPT;
|
|
chip->no_status = true;
|
|
chip->num_regs = 1;
|
|
chip->irqs = dio48e_regmap_irqs;
|
|
chip->num_irqs = ARRAY_SIZE(dio48e_regmap_irqs);
|
|
chip->handle_mask_sync = dio48e_handle_mask_sync;
|
|
chip->irq_drv_data = dio48egpio;
|
|
|
|
/* Initialize to prevent spurious interrupts before we're ready */
|
|
err = dio48e_irq_init_hw(map);
|
|
if (err)
|
|
return err;
|
|
|
|
err = devm_regmap_add_irq_chip(dev, map, irq[id], 0, 0, chip, &chip_data);
|
|
if (err)
|
|
return dev_err_probe(dev, err, "IRQ registration failed\n");
|
|
|
|
pit_config.parent = dev;
|
|
|
|
err = devm_i8254_regmap_register(dev, &pit_config);
|
|
if (err)
|
|
return err;
|
|
|
|
config.parent = dev;
|
|
config.map = map;
|
|
config.num_ppi = DIO48E_NUM_PPI;
|
|
config.names = dio48e_names;
|
|
config.domain = regmap_irq_get_domain(chip_data);
|
|
|
|
return devm_i8255_regmap_register(dev, &config);
|
|
}
|
|
|
|
static struct isa_driver dio48e_driver = {
|
|
.probe = dio48e_probe,
|
|
.driver = {
|
|
.name = "104-dio-48e"
|
|
},
|
|
};
|
|
module_isa_driver_with_irq(dio48e_driver, num_dio48e, num_irq);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_IMPORT_NS(I8254);
|