korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-25 20:14:25 +08:00
Code Issues Packages Projects Releases Wiki Activity
847aed392f
linux/arch/arm/boot/dts/at91sam9263.dtsi
Rob Herring abe60a3a7a ARM: dts: Kill off skeleton{64}.dtsi 
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 17:30:31 +01:00

831 lines
24 KiB
Plaintext
Raw Blame History

/*
* at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2 only.
*/
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Atmel AT91SAM9263 family SoC";
compatible = "atmel,at91sam9263";
interrupt-parent = <&aic>;
aliases {
serial0 = &dbgu;
serial1 = &usart0;
serial2 = &usart1;
serial3 = &usart2;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
i2c0 = &i2c0;
ssc0 = &ssc0;
ssc1 = &ssc1;
pwm0 = &pwm0;
};
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm926ej-s";
device_type = "cpu";
};
};
memory {
device_type = "memory";
reg = <0x20000000 0x08000000>;
};
clocks {
main_xtal: main_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
slow_xtal: slow_xtal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
sram0: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x14000>;
};
sram1: sram@500000 {
compatible = "mmio-sram";
reg = <0x00500000 0x4000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
aic: interrupt-controller@fffff000 {
#interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <30 31>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9263-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
#clock-cells = <2>;
clocks = <&slow_xtal>, <&main_xtal>;
clock-names = "slow_xtal", "main_xtal";
};
ramc0: ramc@ffffe200 {
compatible = "atmel,at91sam9260-sdramc";
reg = <0xffffe200 0x200>;
};
smc0: smc@ffffe400 {
compatible = "atmel,at91sam9260-smc", "syscon";
reg = <0xffffe400 0x200>;
};
ramc1: ramc@ffffe800 {
compatible = "atmel,at91sam9260-sdramc";
reg = <0xffffe800 0x200>;
};
smc1: smc@ffffea00 {
compatible = "atmel,at91sam9260-smc", "syscon";
reg = <0xffffea00 0x200>;
};
matrix: matrix@ffffec00 {
compatible = "atmel,at91sam9263-matrix", "syscon";
reg = <0xffffec00 0x200>;
};
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfff7c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
clock-names = "t0_clk", "slow_clk";
};
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
clocks = <&slow_xtal>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
clocks = <&slow_xtal>;
};
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
/* A B */
0xfffffffb 0xffffe07f /* pioA */
0x0007ffff 0x39072fff /* pioB */
0xffffffff 0x3ffffff8 /* pioC */
0xfffffbff 0xffffffff /* pioD */
0xffe00fff 0xfbfcff00 /* pioE */
>;
/* shared pinctrl settings */
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins =
<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */
};
pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins =
<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */
};
};
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins =
<AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins =
<AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */
};
};
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins =
<AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */
};
pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins =
<AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */
};
};
nand {
pinctrl_nand_rb: nand-rb-0 {
atmel,pins =
<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
};
pinctrl_nand_cs: nand-cs-0 {
atmel,pins =
<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
};
};
macb {
pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins =
<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */
AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */
AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */
AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */
AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */
AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */
AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */
AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */
AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */
AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
};
pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins =
<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */
AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */
AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */
AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */
AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */
};
};
mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins =
<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */
};
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */
};
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins =
<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */
};
pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */
AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */
};
pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
atmel,pins =
<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */
};
};
mmc1 {
pinctrl_mmc1_clk: mmc1_clk-0 {
atmel,pins =
<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */
};
pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */
};
pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */
};
pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */
};
pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */
AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */
AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */
AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */
AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */
AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */
AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */
AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
};
};
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */
AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */
AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */
};
};
spi1 {
pinctrl_spi1: spi1-0 {
atmel,pins =
<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */
AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */
};
};
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
fb {
pinctrl_fb: fb-0 {
atmel,pins =
<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A */
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A */
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A */
AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB9 periph B */
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A */
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A */
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A */
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 periph A */
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 periph A */
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A */
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A */
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A */
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A */
AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC12 periph B */
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC18 periph A */
AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A */
AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A */
AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A */
AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A */
AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC17 periph B */
AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC26 periph A */
AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */
};
};
can {
pinctrl_can_rx_tx: can_rx_tx {
atmel,pins =
<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* CANRX, conflicts with IRQ0 */
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */
};
};
ac97 {
pinctrl_ac97: ac97-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "usart";
status = "disabled";
};
ssc0: ssc@fff98000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "pclk";
status = "disabled";
};
ssc1: ssc@fff9c000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
clock-names = "pclk";
status = "disabled";
};
ac97: sound@fffa0000 {
compatible = "atmel,at91sam9263-ac97c";
reg = <0xfffa0000 0x4000>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ac97>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
clock-names = "ac97_clk";
status = "disabled";
};
macb0: ethernet@fffbc000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "hclk", "pclk";
status = "disabled";
};
usb1: gadget@fff78000 {
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
clock-names = "pclk", "hclk";
status = "disabled";
};
i2c0: i2c@fff88000 {
compatible = "atmel,at91sam9260-i2c";
reg = <0xfff88000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
status = "disabled";
};
mmc0: mmc@fff80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
clock-names = "mci_clk";
status = "disabled";
};
mmc1: mmc@fff84000 {
compatible = "atmel,hsmci";
reg = <0xfff84000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "mci_clk";
status = "disabled";
};
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&slow_xtal>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
status = "disabled";
};
spi0: spi@fffa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
status = "disabled";
};
spi1: spi@fffa8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "spi_clk";
status = "disabled";
};
pwm0: pwm@fffb8000 {
compatible = "atmel,at91sam9rl-pwm";
reg = <0xfffb8000 0x300>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "pwm_clk";
status = "disabled";
};
can: can@fffac000 {
compatible = "atmel,at91sam9263-can";
reg = <0xfffac000 0x300>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_rx_tx>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "can_clk";
};
rtc@fffffd20 {
compatible = "atmel,at91sam9260-rtt";
reg = <0xfffffd20 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&slow_xtal>;
status = "disabled";
};
rtc@fffffd50 {
compatible = "atmel,at91sam9260-rtt";
reg = <0xfffffd50 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&slow_xtal>;
status = "disabled";
};
gpbr: syscon@fffffd60 {
compatible = "atmel,at91sam9260-gpbr", "syscon";
reg = <0xfffffd60 0x50>;
status = "disabled";
};
};
fb0: fb@700000 {
compatible = "atmel,at91sam9263-lcdc";
reg = <0x00700000 0x1000>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
usb0: ohci@a00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
ebi0: ebi@10000000 {
compatible = "atmel,at91sam9263-ebi0";
#address-cells = <2>;
#size-cells = <1>;
atmel,smc = <&smc0>;
atmel,matrix = <&matrix>;
reg = <0x10000000 0x80000000>;
ranges = <0x0 0x0 0x10000000 0x10000000
0x1 0x0 0x20000000 0x10000000
0x2 0x0 0x30000000 0x10000000
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller0: nand-controller {
compatible = "atmel,at91sam9260-nand-controller";
#address-cells = <2>;
#size-cells = <1>;
ranges;
status = "disabled";
};
};
ebi1: ebi@70000000 {
compatible = "atmel,at91sam9263-ebi1";
#address-cells = <2>;
#size-cells = <1>;
atmel,smc = <&smc1>;
atmel,matrix = <&matrix>;
reg = <0x80000000 0x20000000>;
ranges = <0x0 0x0 0x80000000 0x10000000
0x1 0x0 0x90000000 0x10000000>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller1: nand-controller {
compatible = "atmel,at91sam9260-nand-controller";
#address-cells = <2>;
#size-cells = <1>;
ranges;
status = "disabled";
};
};
};
i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
&pioB 5 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
Reference in New Issue View Git Blame Copy Permalink