mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 02:54:32 +08:00
bcd56fe1aa
gpio-restart uses a priority of 128 and currently most soc-level restart mechanisms use the same - with some exceptions even using 192. But while the soc-level restarts are provided by the soc itself, gpio-restarts will most of the time be board-specfic and be used when some special board condition makes the soc-level restart only a second choice. The problem at hand manifested itself on the rk3288-veyron devices. While the soc-level restart can sucessfully restart all other rockchip boards I have, the veyron devices use an external restart mechanism that seems to not only reset the soc but also some external needed components. With both restart handlers having priority 128 in my tests the soc-specific variant took precedent in all cases. While it could restart the soc sucessfully in all cases, firmware then got an issue when talking to an external component, resulting in the device being put into recovery mode. So, give the board-specific restart handler a slight push and move it to priority 129 to make it more important than the generic soc-specific restart-handler. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sebastian Reichel <sre@kernel.org>
149 lines
4.0 KiB
C
149 lines
4.0 KiB
C
/*
|
|
* Toggles a GPIO pin to restart a device
|
|
*
|
|
* Copyright (C) 2014 Google, Inc.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Based on the gpio-poweroff driver.
|
|
*/
|
|
#include <linux/reboot.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/module.h>
|
|
|
|
struct gpio_restart {
|
|
struct gpio_desc *reset_gpio;
|
|
struct notifier_block restart_handler;
|
|
u32 active_delay_ms;
|
|
u32 inactive_delay_ms;
|
|
u32 wait_delay_ms;
|
|
};
|
|
|
|
static int gpio_restart_notify(struct notifier_block *this,
|
|
unsigned long mode, void *cmd)
|
|
{
|
|
struct gpio_restart *gpio_restart =
|
|
container_of(this, struct gpio_restart, restart_handler);
|
|
|
|
/* drive it active, also inactive->active edge */
|
|
gpiod_direction_output(gpio_restart->reset_gpio, 1);
|
|
mdelay(gpio_restart->active_delay_ms);
|
|
|
|
/* drive inactive, also active->inactive edge */
|
|
gpiod_set_value(gpio_restart->reset_gpio, 0);
|
|
mdelay(gpio_restart->inactive_delay_ms);
|
|
|
|
/* drive it active, also inactive->active edge */
|
|
gpiod_set_value(gpio_restart->reset_gpio, 1);
|
|
|
|
/* give it some time */
|
|
mdelay(gpio_restart->wait_delay_ms);
|
|
|
|
WARN_ON(1);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int gpio_restart_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpio_restart *gpio_restart;
|
|
bool open_source = false;
|
|
u32 property;
|
|
int ret;
|
|
|
|
gpio_restart = devm_kzalloc(&pdev->dev, sizeof(*gpio_restart),
|
|
GFP_KERNEL);
|
|
if (!gpio_restart)
|
|
return -ENOMEM;
|
|
|
|
open_source = of_property_read_bool(pdev->dev.of_node, "open-source");
|
|
|
|
gpio_restart->reset_gpio = devm_gpiod_get(&pdev->dev, NULL,
|
|
open_source ? GPIOD_IN : GPIOD_OUT_LOW);
|
|
if (IS_ERR(gpio_restart->reset_gpio)) {
|
|
dev_err(&pdev->dev, "Could net get reset GPIO\n");
|
|
return PTR_ERR(gpio_restart->reset_gpio);
|
|
}
|
|
|
|
gpio_restart->restart_handler.notifier_call = gpio_restart_notify;
|
|
gpio_restart->restart_handler.priority = 129;
|
|
gpio_restart->active_delay_ms = 100;
|
|
gpio_restart->inactive_delay_ms = 100;
|
|
gpio_restart->wait_delay_ms = 3000;
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "priority", &property);
|
|
if (!ret) {
|
|
if (property > 255)
|
|
dev_err(&pdev->dev, "Invalid priority property: %u\n",
|
|
property);
|
|
else
|
|
gpio_restart->restart_handler.priority = property;
|
|
}
|
|
|
|
of_property_read_u32(pdev->dev.of_node, "active-delay",
|
|
&gpio_restart->active_delay_ms);
|
|
of_property_read_u32(pdev->dev.of_node, "inactive-delay",
|
|
&gpio_restart->inactive_delay_ms);
|
|
of_property_read_u32(pdev->dev.of_node, "wait-delay",
|
|
&gpio_restart->wait_delay_ms);
|
|
|
|
platform_set_drvdata(pdev, gpio_restart);
|
|
|
|
ret = register_restart_handler(&gpio_restart->restart_handler);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "%s: cannot register restart handler, %d\n",
|
|
__func__, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_restart_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpio_restart *gpio_restart = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = unregister_restart_handler(&gpio_restart->restart_handler);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"%s: cannot unregister restart handler, %d\n",
|
|
__func__, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id of_gpio_restart_match[] = {
|
|
{ .compatible = "gpio-restart", },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver gpio_restart_driver = {
|
|
.probe = gpio_restart_probe,
|
|
.remove = gpio_restart_remove,
|
|
.driver = {
|
|
.name = "restart-gpio",
|
|
.of_match_table = of_gpio_restart_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(gpio_restart_driver);
|
|
|
|
MODULE_AUTHOR("David Riley <davidriley@chromium.org>");
|
|
MODULE_DESCRIPTION("GPIO restart driver");
|
|
MODULE_LICENSE("GPL");
|