mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 21:24:08 +08:00
c23e55e668
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-imx.c:21: warning: expecting prototype for cdns3(). Prototype was for USB3_CORE_CTRL1() instead Cc: Peter Chen <peter.chen@kernel.org> Cc: Pawel Laszczak <pawell@cadence.com> Cc: Roger Quadros <rogerq@kernel.org> Cc: Aswath Govindraju <a-govindraju@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-11-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
432 lines
11 KiB
C
432 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
|
|
*
|
|
* Copyright (C) 2019 NXP
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include "core.h"
|
|
|
|
#define USB3_CORE_CTRL1 0x00
|
|
#define USB3_CORE_CTRL2 0x04
|
|
#define USB3_INT_REG 0x08
|
|
#define USB3_CORE_STATUS 0x0c
|
|
#define XHCI_DEBUG_LINK_ST 0x10
|
|
#define XHCI_DEBUG_BUS 0x14
|
|
#define USB3_SSPHY_CTRL1 0x40
|
|
#define USB3_SSPHY_CTRL2 0x44
|
|
#define USB3_SSPHY_STATUS 0x4c
|
|
#define USB2_PHY_CTRL1 0x50
|
|
#define USB2_PHY_CTRL2 0x54
|
|
#define USB2_PHY_STATUS 0x5c
|
|
|
|
/* Register bits definition */
|
|
|
|
/* USB3_CORE_CTRL1 */
|
|
#define SW_RESET_MASK GENMASK(31, 26)
|
|
#define PWR_SW_RESET BIT(31)
|
|
#define APB_SW_RESET BIT(30)
|
|
#define AXI_SW_RESET BIT(29)
|
|
#define RW_SW_RESET BIT(28)
|
|
#define PHY_SW_RESET BIT(27)
|
|
#define PHYAHB_SW_RESET BIT(26)
|
|
#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
|
|
RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
|
|
#define OC_DISABLE BIT(9)
|
|
#define MDCTRL_CLK_SEL BIT(7)
|
|
#define MODE_STRAP_MASK (0x7)
|
|
#define DEV_MODE (1 << 2)
|
|
#define HOST_MODE (1 << 1)
|
|
#define OTG_MODE (1 << 0)
|
|
|
|
/* USB3_INT_REG */
|
|
#define CLK_125_REQ BIT(29)
|
|
#define LPM_CLK_REQ BIT(28)
|
|
#define DEVU3_WAEKUP_EN BIT(14)
|
|
#define OTG_WAKEUP_EN BIT(12)
|
|
#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
|
|
#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
|
|
|
|
/* USB3_CORE_STATUS */
|
|
#define MDCTRL_CLK_STATUS BIT(15)
|
|
#define DEV_POWER_ON_READY BIT(13)
|
|
#define HOST_POWER_ON_READY BIT(12)
|
|
|
|
/* USB3_SSPHY_STATUS */
|
|
#define CLK_VALID_MASK (0x3f << 26)
|
|
#define CLK_VALID_COMPARE_BITS (0xf << 28)
|
|
#define PHY_REFCLK_REQ (1 << 0)
|
|
|
|
/* OTG registers definition */
|
|
#define OTGSTS 0x4
|
|
/* OTGSTS */
|
|
#define OTG_NRDY BIT(11)
|
|
|
|
/* xHCI registers definition */
|
|
#define XECP_PM_PMCSR 0x8018
|
|
#define XECP_AUX_CTRL_REG1 0x8120
|
|
|
|
/* Register bits definition */
|
|
/* XECP_AUX_CTRL_REG1 */
|
|
#define CFG_RXDET_P3_EN BIT(15)
|
|
|
|
/* XECP_PM_PMCSR */
|
|
#define PS_MASK GENMASK(1, 0)
|
|
#define PS_D0 0
|
|
#define PS_D1 1
|
|
|
|
struct cdns_imx {
|
|
struct device *dev;
|
|
void __iomem *noncore;
|
|
struct clk_bulk_data *clks;
|
|
int num_clks;
|
|
struct platform_device *cdns3_pdev;
|
|
};
|
|
|
|
static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
|
|
{
|
|
return readl(data->noncore + offset);
|
|
}
|
|
|
|
static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
|
|
{
|
|
writel(value, data->noncore + offset);
|
|
}
|
|
|
|
static const struct clk_bulk_data imx_cdns3_core_clks[] = {
|
|
{ .id = "usb3_lpm_clk" },
|
|
{ .id = "usb3_bus_clk" },
|
|
{ .id = "usb3_aclk" },
|
|
{ .id = "usb3_ipg_clk" },
|
|
{ .id = "usb3_core_pclk" },
|
|
};
|
|
|
|
static int cdns_imx_noncore_init(struct cdns_imx *data)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
struct device *dev = data->dev;
|
|
|
|
cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
|
|
udelay(1);
|
|
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
|
|
(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
|
|
10, 100000);
|
|
if (ret) {
|
|
dev_err(dev, "wait clkvld timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value |= ALL_SW_RESET;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
udelay(1);
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
value |= HOST_INT1_EN | DEV_INT_EN;
|
|
cdns_imx_writel(data, USB3_INT_REG, value);
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value &= ~ALL_SW_RESET;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns_imx_platform_suspend(struct device *dev,
|
|
bool suspend, bool wakeup);
|
|
static struct cdns3_platform_data cdns_imx_pdata = {
|
|
.platform_suspend = cdns_imx_platform_suspend,
|
|
.quirks = CDNS3_DEFAULT_PM_RUNTIME_ALLOW,
|
|
};
|
|
|
|
static const struct of_dev_auxdata cdns_imx_auxdata[] = {
|
|
{
|
|
.compatible = "cdns,usb3",
|
|
.platform_data = &cdns_imx_pdata,
|
|
},
|
|
{},
|
|
};
|
|
|
|
static int cdns_imx_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct cdns_imx *data;
|
|
int ret;
|
|
|
|
if (!node)
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
data->dev = dev;
|
|
data->noncore = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(data->noncore)) {
|
|
dev_err(dev, "can't map IOMEM resource\n");
|
|
return PTR_ERR(data->noncore);
|
|
}
|
|
|
|
data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
|
|
data->clks = devm_kmemdup(dev, imx_cdns3_core_clks,
|
|
sizeof(imx_cdns3_core_clks), GFP_KERNEL);
|
|
if (!data->clks)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = cdns_imx_noncore_init(data);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to create children: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
device_set_wakeup_capable(dev, true);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return ret;
|
|
err:
|
|
clk_bulk_disable_unprepare(data->num_clks, data->clks);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct cdns_imx *data = dev_get_drvdata(dev);
|
|
|
|
pm_runtime_get_sync(dev);
|
|
of_platform_depopulate(dev);
|
|
clk_bulk_disable_unprepare(data->num_clks, data->clks);
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_put_noidle(dev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
|
|
{
|
|
u32 value;
|
|
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
if (enable)
|
|
value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
|
|
else
|
|
value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
|
|
|
|
cdns_imx_writel(data, USB3_INT_REG, value);
|
|
}
|
|
|
|
static int cdns_imx_platform_suspend(struct device *dev,
|
|
bool suspend, bool wakeup)
|
|
{
|
|
struct cdns *cdns = dev_get_drvdata(dev);
|
|
struct device *parent = dev->parent;
|
|
struct cdns_imx *data = dev_get_drvdata(parent);
|
|
void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs);
|
|
void __iomem *xhci_regs = cdns->xhci_regs;
|
|
u32 value;
|
|
int ret = 0;
|
|
|
|
if (cdns->role != USB_ROLE_HOST)
|
|
return 0;
|
|
|
|
if (suspend) {
|
|
/* SW request low power when all usb ports allow to it ??? */
|
|
value = readl(xhci_regs + XECP_PM_PMCSR);
|
|
value &= ~PS_MASK;
|
|
value |= PS_D1;
|
|
writel(value, xhci_regs + XECP_PM_PMCSR);
|
|
|
|
/* mdctrl_clk_sel */
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value |= MDCTRL_CLK_SEL;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
/* wait for mdctrl_clk_status */
|
|
value = cdns_imx_readl(data, USB3_CORE_STATUS);
|
|
ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
|
|
(value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait mdctrl_clk_status timeout\n");
|
|
|
|
/* wait lpm_clk_req to be 0 */
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
|
|
(value & LPM_CLK_REQ) != LPM_CLK_REQ,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait lpm_clk_req timeout\n");
|
|
|
|
/* wait phy_refclk_req to be 0 */
|
|
value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
|
|
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
|
|
(value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait phy_refclk_req timeout\n");
|
|
|
|
cdns3_set_wakeup(data, wakeup);
|
|
} else {
|
|
cdns3_set_wakeup(data, false);
|
|
|
|
/* SW request D0 */
|
|
value = readl(xhci_regs + XECP_PM_PMCSR);
|
|
value &= ~PS_MASK;
|
|
value |= PS_D0;
|
|
writel(value, xhci_regs + XECP_PM_PMCSR);
|
|
|
|
/* clr CFG_RXDET_P3_EN */
|
|
value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
|
|
value &= ~CFG_RXDET_P3_EN;
|
|
writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
|
|
|
|
/* clear mdctrl_clk_sel */
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
value &= ~MDCTRL_CLK_SEL;
|
|
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
|
|
|
|
/* wait CLK_125_REQ to be 1 */
|
|
value = cdns_imx_readl(data, USB3_INT_REG);
|
|
ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
|
|
(value & CLK_125_REQ) == CLK_125_REQ,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait CLK_125_REQ timeout\n");
|
|
|
|
/* wait for mdctrl_clk_status is cleared */
|
|
value = cdns_imx_readl(data, USB3_CORE_STATUS);
|
|
ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
|
|
(value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
|
|
|
|
/* Wait until OTG_NRDY is 0 */
|
|
value = readl(otg_regs + OTGSTS);
|
|
ret = readl_poll_timeout(otg_regs + OTGSTS, value,
|
|
(value & OTG_NRDY) != OTG_NRDY,
|
|
10, 100000);
|
|
if (ret)
|
|
dev_warn(parent, "wait OTG ready timeout\n");
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int cdns_imx_resume(struct device *dev)
|
|
{
|
|
struct cdns_imx *data = dev_get_drvdata(dev);
|
|
|
|
return clk_bulk_prepare_enable(data->num_clks, data->clks);
|
|
}
|
|
|
|
static int cdns_imx_suspend(struct device *dev)
|
|
{
|
|
struct cdns_imx *data = dev_get_drvdata(dev);
|
|
|
|
clk_bulk_disable_unprepare(data->num_clks, data->clks);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Indicate if the controller was power lost before */
|
|
static inline bool cdns_imx_is_power_lost(struct cdns_imx *data)
|
|
{
|
|
u32 value;
|
|
|
|
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
|
|
if ((value & SW_RESET_MASK) == ALL_SW_RESET)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static int __maybe_unused cdns_imx_system_resume(struct device *dev)
|
|
{
|
|
struct cdns_imx *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = cdns_imx_resume(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (cdns_imx_is_power_lost(data)) {
|
|
dev_dbg(dev, "resume from power lost\n");
|
|
ret = cdns_imx_noncore_init(data);
|
|
if (ret)
|
|
cdns_imx_suspend(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#else
|
|
static int cdns_imx_platform_suspend(struct device *dev,
|
|
bool suspend, bool wakeup)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops cdns_imx_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(cdns_imx_suspend, cdns_imx_system_resume)
|
|
};
|
|
|
|
static const struct of_device_id cdns_imx_of_match[] = {
|
|
{ .compatible = "fsl,imx8qm-usb3", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
|
|
|
|
static struct platform_driver cdns_imx_driver = {
|
|
.probe = cdns_imx_probe,
|
|
.remove = cdns_imx_remove,
|
|
.driver = {
|
|
.name = "cdns3-imx",
|
|
.of_match_table = cdns_imx_of_match,
|
|
.pm = &cdns_imx_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(cdns_imx_driver);
|
|
|
|
MODULE_ALIAS("platform:cdns3-imx");
|
|
MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
|