linux/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
Ioana Ciornei f48298d3fb staging: dpaa2-switch: move the driver out of staging
Now that the dpaa2-switch driver has basic I/O capabilities on the
switch port net_devices and multiple bridging domains are supported,
move the driver out of staging.

The dpaa2-switch driver is placed right next to the dpaa2-eth driver
since, in the near future, they will be sharing most of the data path.
I didn't implement code reuse in this patch series because I wanted to
keep it as small as possible.

Also, the README is removed from staging with the intention to add
proper rst documentation afterwards to actually match was is supported
by the driver.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10 13:30:36 -08:00

190 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* DPAA2 Ethernet Switch ethtool support
*
* Copyright 2014-2016 Freescale Semiconductor Inc.
* Copyright 2017-2018 NXP
*
*/
#include <linux/ethtool.h>
#include "dpaa2-switch.h"
static struct {
enum dpsw_counter id;
char name[ETH_GSTRING_LEN];
} dpaa2_switch_ethtool_counters[] = {
{DPSW_CNT_ING_FRAME, "rx frames"},
{DPSW_CNT_ING_BYTE, "rx bytes"},
{DPSW_CNT_ING_FLTR_FRAME, "rx filtered frames"},
{DPSW_CNT_ING_FRAME_DISCARD, "rx discarded frames"},
{DPSW_CNT_ING_BCAST_FRAME, "rx b-cast frames"},
{DPSW_CNT_ING_BCAST_BYTES, "rx b-cast bytes"},
{DPSW_CNT_ING_MCAST_FRAME, "rx m-cast frames"},
{DPSW_CNT_ING_MCAST_BYTE, "rx m-cast bytes"},
{DPSW_CNT_EGR_FRAME, "tx frames"},
{DPSW_CNT_EGR_BYTE, "tx bytes"},
{DPSW_CNT_EGR_FRAME_DISCARD, "tx discarded frames"},
{DPSW_CNT_ING_NO_BUFF_DISCARD, "rx discarded no buffer frames"},
};
#define DPAA2_SWITCH_NUM_COUNTERS ARRAY_SIZE(dpaa2_switch_ethtool_counters)
static void dpaa2_switch_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
u16 version_major, version_minor;
int err;
strscpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
err = dpsw_get_api_version(port_priv->ethsw_data->mc_io, 0,
&version_major,
&version_minor);
if (err)
strscpy(drvinfo->fw_version, "N/A",
sizeof(drvinfo->fw_version));
else
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
"%u.%u", version_major, version_minor);
strscpy(drvinfo->bus_info, dev_name(netdev->dev.parent->parent),
sizeof(drvinfo->bus_info));
}
static int
dpaa2_switch_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *link_ksettings)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
struct dpsw_link_state state = {0};
int err = 0;
err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
port_priv->ethsw_data->dpsw_handle,
port_priv->idx,
&state);
if (err) {
netdev_err(netdev, "ERROR %d getting link state\n", err);
goto out;
}
/* At the moment, we have no way of interrogating the DPMAC
* from the DPSW side or there may not exist a DPMAC at all.
* Report only autoneg state, duplexity and speed.
*/
if (state.options & DPSW_LINK_OPT_AUTONEG)
link_ksettings->base.autoneg = AUTONEG_ENABLE;
if (!(state.options & DPSW_LINK_OPT_HALF_DUPLEX))
link_ksettings->base.duplex = DUPLEX_FULL;
link_ksettings->base.speed = state.rate;
out:
return err;
}
static int
dpaa2_switch_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *link_ksettings)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
struct ethsw_core *ethsw = port_priv->ethsw_data;
struct dpsw_link_cfg cfg = {0};
bool if_running;
int err = 0, ret;
/* Interface needs to be down to change link settings */
if_running = netif_running(netdev);
if (if_running) {
err = dpsw_if_disable(ethsw->mc_io, 0,
ethsw->dpsw_handle,
port_priv->idx);
if (err) {
netdev_err(netdev, "dpsw_if_disable err %d\n", err);
return err;
}
}
cfg.rate = link_ksettings->base.speed;
if (link_ksettings->base.autoneg == AUTONEG_ENABLE)
cfg.options |= DPSW_LINK_OPT_AUTONEG;
else
cfg.options &= ~DPSW_LINK_OPT_AUTONEG;
if (link_ksettings->base.duplex == DUPLEX_HALF)
cfg.options |= DPSW_LINK_OPT_HALF_DUPLEX;
else
cfg.options &= ~DPSW_LINK_OPT_HALF_DUPLEX;
err = dpsw_if_set_link_cfg(port_priv->ethsw_data->mc_io, 0,
port_priv->ethsw_data->dpsw_handle,
port_priv->idx,
&cfg);
if (if_running) {
ret = dpsw_if_enable(ethsw->mc_io, 0,
ethsw->dpsw_handle,
port_priv->idx);
if (ret) {
netdev_err(netdev, "dpsw_if_enable err %d\n", ret);
return ret;
}
}
return err;
}
static int dpaa2_switch_ethtool_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return DPAA2_SWITCH_NUM_COUNTERS;
default:
return -EOPNOTSUPP;
}
}
static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
u32 stringset, u8 *data)
{
int i;
switch (stringset) {
case ETH_SS_STATS:
for (i = 0; i < DPAA2_SWITCH_NUM_COUNTERS; i++)
memcpy(data + i * ETH_GSTRING_LEN,
dpaa2_switch_ethtool_counters[i].name,
ETH_GSTRING_LEN);
break;
}
}
static void dpaa2_switch_ethtool_get_stats(struct net_device *netdev,
struct ethtool_stats *stats,
u64 *data)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
int i, err;
for (i = 0; i < DPAA2_SWITCH_NUM_COUNTERS; i++) {
err = dpsw_if_get_counter(port_priv->ethsw_data->mc_io, 0,
port_priv->ethsw_data->dpsw_handle,
port_priv->idx,
dpaa2_switch_ethtool_counters[i].id,
&data[i]);
if (err)
netdev_err(netdev, "dpsw_if_get_counter[%s] err %d\n",
dpaa2_switch_ethtool_counters[i].name, err);
}
}
const struct ethtool_ops dpaa2_switch_port_ethtool_ops = {
.get_drvinfo = dpaa2_switch_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_link_ksettings = dpaa2_switch_get_link_ksettings,
.set_link_ksettings = dpaa2_switch_set_link_ksettings,
.get_strings = dpaa2_switch_ethtool_get_strings,
.get_ethtool_stats = dpaa2_switch_ethtool_get_stats,
.get_sset_count = dpaa2_switch_ethtool_get_sset_count,
};