linux/Documentation/RCU/checklist.rst
Akira Yokosawa 404147faaa docs: Update RCU cross-references as suggested in doc-guide
The RCU documentation contains old-style cross references which
do not follow the best practices outlined in doc-guide/sphinx.rst.
In addition, some of the cross references use URLs that should be replaced
by pathnames.

Update all of these cross references and adjust the surrounding words.

Summary of changes:

  - out-of-date plaintext file names (*.txt) -> *.rst
  - references by :ref: tags -> path names of *.rst
    * use relative paths to .rst files under the RCU/ subdirectory
    * use abs paths of Documentation/xxx for other .rst files
  - references by URL under https://www.kernel.org/ -> paths of *.rst
  - adjust surrounding words of some of updated references.

Note:
  The automarkup.py script interprets references via "*.txt" as if they
were via "*.rst", so the *.txt -> *.rst changes should be regarded as
cleanups rather than bug fixes.

Cc: rcu@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-20 16:13:52 -07:00

483 lines
23 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0
================================
Review Checklist for RCU Patches
================================
This document contains a checklist for producing and reviewing patches
that make use of RCU. Violating any of the rules listed below will
result in the same sorts of problems that leaving out a locking primitive
would cause. This list is based on experiences reviewing such patches
over a rather long period of time, but improvements are always welcome!
0. Is RCU being applied to a read-mostly situation? If the data
structure is updated more than about 10% of the time, then you
should strongly consider some other approach, unless detailed
performance measurements show that RCU is nonetheless the right
tool for the job. Yes, RCU does reduce read-side overhead by
increasing write-side overhead, which is exactly why normal uses
of RCU will do much more reading than updating.
Another exception is where performance is not an issue, and RCU
provides a simpler implementation. An example of this situation
is the dynamic NMI code in the Linux 2.6 kernel, at least on
architectures where NMIs are rare.
Yet another exception is where the low real-time latency of RCU's
read-side primitives is critically important.
One final exception is where RCU readers are used to prevent
the ABA problem (https://en.wikipedia.org/wiki/ABA_problem)
for lockless updates. This does result in the mildly
counter-intuitive situation where rcu_read_lock() and
rcu_read_unlock() are used to protect updates, however, this
approach provides the same potential simplifications that garbage
collectors do.
1. Does the update code have proper mutual exclusion?
RCU does allow *readers* to run (almost) naked, but *writers* must
still use some sort of mutual exclusion, such as:
a. locking,
b. atomic operations, or
c. restricting updates to a single task.
If you choose #b, be prepared to describe how you have handled
memory barriers on weakly ordered machines (pretty much all of
them -- even x86 allows later loads to be reordered to precede
earlier stores), and be prepared to explain why this added
complexity is worthwhile. If you choose #c, be prepared to
explain how this single task does not become a major bottleneck on
big multiprocessor machines (for example, if the task is updating
information relating to itself that other tasks can read, there
by definition can be no bottleneck). Note that the definition
of "large" has changed significantly: Eight CPUs was "large"
in the year 2000, but a hundred CPUs was unremarkable in 2017.
2. Do the RCU read-side critical sections make proper use of
rcu_read_lock() and friends? These primitives are needed
to prevent grace periods from ending prematurely, which
could result in data being unceremoniously freed out from
under your read-side code, which can greatly increase the
actuarial risk of your kernel.
As a rough rule of thumb, any dereference of an RCU-protected
pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
rcu_read_lock_sched(), or by the appropriate update-side lock.
Disabling of preemption can serve as rcu_read_lock_sched(), but
is less readable and prevents lockdep from detecting locking issues.
Letting RCU-protected pointers "leak" out of an RCU read-side
critical section is every bit as bad as letting them leak out
from under a lock. Unless, of course, you have arranged some
other means of protection, such as a lock or a reference count
*before* letting them out of the RCU read-side critical section.
3. Does the update code tolerate concurrent accesses?
The whole point of RCU is to permit readers to run without
any locks or atomic operations. This means that readers will
be running while updates are in progress. There are a number
of ways to handle this concurrency, depending on the situation:
a. Use the RCU variants of the list and hlist update
primitives to add, remove, and replace elements on
an RCU-protected list. Alternatively, use the other
RCU-protected data structures that have been added to
the Linux kernel.
This is almost always the best approach.
b. Proceed as in (a) above, but also maintain per-element
locks (that are acquired by both readers and writers)
that guard per-element state. Of course, fields that
the readers refrain from accessing can be guarded by
some other lock acquired only by updaters, if desired.
This works quite well, also.
c. Make updates appear atomic to readers. For example,
pointer updates to properly aligned fields will
appear atomic, as will individual atomic primitives.
Sequences of operations performed under a lock will *not*
appear to be atomic to RCU readers, nor will sequences
of multiple atomic primitives.
This can work, but is starting to get a bit tricky.
d. Carefully order the updates and the reads so that
readers see valid data at all phases of the update.
This is often more difficult than it sounds, especially
given modern CPUs' tendency to reorder memory references.
One must usually liberally sprinkle memory barriers
(smp_wmb(), smp_rmb(), smp_mb()) through the code,
making it difficult to understand and to test.
It is usually better to group the changing data into
a separate structure, so that the change may be made
to appear atomic by updating a pointer to reference
a new structure containing updated values.
4. Weakly ordered CPUs pose special challenges. Almost all CPUs
are weakly ordered -- even x86 CPUs allow later loads to be
reordered to precede earlier stores. RCU code must take all of
the following measures to prevent memory-corruption problems:
a. Readers must maintain proper ordering of their memory
accesses. The rcu_dereference() primitive ensures that
the CPU picks up the pointer before it picks up the data
that the pointer points to. This really is necessary
on Alpha CPUs.
The rcu_dereference() primitive is also an excellent
documentation aid, letting the person reading the
code know exactly which pointers are protected by RCU.
Please note that compilers can also reorder code, and
they are becoming increasingly aggressive about doing
just that. The rcu_dereference() primitive therefore also
prevents destructive compiler optimizations. However,
with a bit of devious creativity, it is possible to
mishandle the return value from rcu_dereference().
Please see rcu_dereference.rst for more information.
The rcu_dereference() primitive is used by the
various "_rcu()" list-traversal primitives, such
as the list_for_each_entry_rcu(). Note that it is
perfectly legal (if redundant) for update-side code to
use rcu_dereference() and the "_rcu()" list-traversal
primitives. This is particularly useful in code that
is common to readers and updaters. However, lockdep
will complain if you access rcu_dereference() outside
of an RCU read-side critical section. See lockdep.rst
to learn what to do about this.
Of course, neither rcu_dereference() nor the "_rcu()"
list-traversal primitives can substitute for a good
concurrency design coordinating among multiple updaters.
b. If the list macros are being used, the list_add_tail_rcu()
and list_add_rcu() primitives must be used in order
to prevent weakly ordered machines from misordering
structure initialization and pointer planting.
Similarly, if the hlist macros are being used, the
hlist_add_head_rcu() primitive is required.
c. If the list macros are being used, the list_del_rcu()
primitive must be used to keep list_del()'s pointer
poisoning from inflicting toxic effects on concurrent
readers. Similarly, if the hlist macros are being used,
the hlist_del_rcu() primitive is required.
The list_replace_rcu() and hlist_replace_rcu() primitives
may be used to replace an old structure with a new one
in their respective types of RCU-protected lists.
d. Rules similar to (4b) and (4c) apply to the "hlist_nulls"
type of RCU-protected linked lists.
e. Updates must ensure that initialization of a given
structure happens before pointers to that structure are
publicized. Use the rcu_assign_pointer() primitive
when publicizing a pointer to a structure that can
be traversed by an RCU read-side critical section.
5. If call_rcu() or call_srcu() is used, the callback function will
be called from softirq context. In particular, it cannot block.
6. Since synchronize_rcu() can block, it cannot be called
from any sort of irq context. The same rule applies
for synchronize_srcu(), synchronize_rcu_expedited(), and
synchronize_srcu_expedited().
The expedited forms of these primitives have the same semantics
as the non-expedited forms, but expediting is both expensive and
(with the exception of synchronize_srcu_expedited()) unfriendly
to real-time workloads. Use of the expedited primitives should
be restricted to rare configuration-change operations that would
not normally be undertaken while a real-time workload is running.
However, real-time workloads can use rcupdate.rcu_normal kernel
boot parameter to completely disable expedited grace periods,
though this might have performance implications.
In particular, if you find yourself invoking one of the expedited
primitives repeatedly in a loop, please do everyone a favor:
Restructure your code so that it batches the updates, allowing
a single non-expedited primitive to cover the entire batch.
This will very likely be faster than the loop containing the
expedited primitive, and will be much much easier on the rest
of the system, especially to real-time workloads running on
the rest of the system.
7. As of v4.20, a given kernel implements only one RCU flavor, which
is RCU-sched for PREEMPTION=n and RCU-preempt for PREEMPTION=y.
If the updater uses call_rcu() or synchronize_rcu(), then
the corresponding readers may use: (1) rcu_read_lock() and
rcu_read_unlock(), (2) any pair of primitives that disables
and re-enables softirq, for example, rcu_read_lock_bh() and
rcu_read_unlock_bh(), or (3) any pair of primitives that disables
and re-enables preemption, for example, rcu_read_lock_sched() and
rcu_read_unlock_sched(). If the updater uses synchronize_srcu()
or call_srcu(), then the corresponding readers must use
srcu_read_lock() and srcu_read_unlock(), and with the same
srcu_struct. The rules for the expedited RCU grace-period-wait
primitives are the same as for their non-expedited counterparts.
If the updater uses call_rcu_tasks() or synchronize_rcu_tasks(),
then the readers must refrain from executing voluntary
context switches, that is, from blocking. If the updater uses
call_rcu_tasks_trace() or synchronize_rcu_tasks_trace(), then
the corresponding readers must use rcu_read_lock_trace() and
rcu_read_unlock_trace(). If an updater uses call_rcu_tasks_rude()
or synchronize_rcu_tasks_rude(), then the corresponding readers
must use anything that disables interrupts.
Mixing things up will result in confusion and broken kernels, and
has even resulted in an exploitable security issue. Therefore,
when using non-obvious pairs of primitives, commenting is
of course a must. One example of non-obvious pairing is
the XDP feature in networking, which calls BPF programs from
network-driver NAPI (softirq) context. BPF relies heavily on RCU
protection for its data structures, but because the BPF program
invocation happens entirely within a single local_bh_disable()
section in a NAPI poll cycle, this usage is safe. The reason
that this usage is safe is that readers can use anything that
disables BH when updaters use call_rcu() or synchronize_rcu().
8. Although synchronize_rcu() is slower than is call_rcu(), it
usually results in simpler code. So, unless update performance is
critically important, the updaters cannot block, or the latency of
synchronize_rcu() is visible from userspace, synchronize_rcu()
should be used in preference to call_rcu(). Furthermore,
kfree_rcu() usually results in even simpler code than does
synchronize_rcu() without synchronize_rcu()'s multi-millisecond
latency. So please take advantage of kfree_rcu()'s "fire and
forget" memory-freeing capabilities where it applies.
An especially important property of the synchronize_rcu()
primitive is that it automatically self-limits: if grace periods
are delayed for whatever reason, then the synchronize_rcu()
primitive will correspondingly delay updates. In contrast,
code using call_rcu() should explicitly limit update rate in
cases where grace periods are delayed, as failing to do so can
result in excessive realtime latencies or even OOM conditions.
Ways of gaining this self-limiting property when using call_rcu()
include:
a. Keeping a count of the number of data-structure elements
used by the RCU-protected data structure, including
those waiting for a grace period to elapse. Enforce a
limit on this number, stalling updates as needed to allow
previously deferred frees to complete. Alternatively,
limit only the number awaiting deferred free rather than
the total number of elements.
One way to stall the updates is to acquire the update-side
mutex. (Don't try this with a spinlock -- other CPUs
spinning on the lock could prevent the grace period
from ever ending.) Another way to stall the updates
is for the updates to use a wrapper function around
the memory allocator, so that this wrapper function
simulates OOM when there is too much memory awaiting an
RCU grace period. There are of course many other
variations on this theme.
b. Limiting update rate. For example, if updates occur only
once per hour, then no explicit rate limiting is
required, unless your system is already badly broken.
Older versions of the dcache subsystem take this approach,
guarding updates with a global lock, limiting their rate.
c. Trusted update -- if updates can only be done manually by
superuser or some other trusted user, then it might not
be necessary to automatically limit them. The theory
here is that superuser already has lots of ways to crash
the machine.
d. Periodically invoke synchronize_rcu(), permitting a limited
number of updates per grace period.
The same cautions apply to call_srcu() and kfree_rcu().
Note that although these primitives do take action to avoid memory
exhaustion when any given CPU has too many callbacks, a determined
user could still exhaust memory. This is especially the case
if a system with a large number of CPUs has been configured to
offload all of its RCU callbacks onto a single CPU, or if the
system has relatively little free memory.
9. All RCU list-traversal primitives, which include
rcu_dereference(), list_for_each_entry_rcu(), and
list_for_each_safe_rcu(), must be either within an RCU read-side
critical section or must be protected by appropriate update-side
locks. RCU read-side critical sections are delimited by
rcu_read_lock() and rcu_read_unlock(), or by similar primitives
such as rcu_read_lock_bh() and rcu_read_unlock_bh(), in which
case the matching rcu_dereference() primitive must be used in
order to keep lockdep happy, in this case, rcu_dereference_bh().
The reason that it is permissible to use RCU list-traversal
primitives when the update-side lock is held is that doing so
can be quite helpful in reducing code bloat when common code is
shared between readers and updaters. Additional primitives
are provided for this case, as discussed in lockdep.rst.
One exception to this rule is when data is only ever added to
the linked data structure, and is never removed during any
time that readers might be accessing that structure. In such
cases, READ_ONCE() may be used in place of rcu_dereference()
and the read-side markers (rcu_read_lock() and rcu_read_unlock(),
for example) may be omitted.
10. Conversely, if you are in an RCU read-side critical section,
and you don't hold the appropriate update-side lock, you *must*
use the "_rcu()" variants of the list macros. Failing to do so
will break Alpha, cause aggressive compilers to generate bad code,
and confuse people trying to read your code.
11. Any lock acquired by an RCU callback must be acquired elsewhere
with softirq disabled, e.g., via spin_lock_irqsave(),
spin_lock_bh(), etc. Failing to disable softirq on a given
acquisition of that lock will result in deadlock as soon as
the RCU softirq handler happens to run your RCU callback while
interrupting that acquisition's critical section.
12. RCU callbacks can be and are executed in parallel. In many cases,
the callback code simply wrappers around kfree(), so that this
is not an issue (or, more accurately, to the extent that it is
an issue, the memory-allocator locking handles it). However,
if the callbacks do manipulate a shared data structure, they
must use whatever locking or other synchronization is required
to safely access and/or modify that data structure.
Do not assume that RCU callbacks will be executed on the same
CPU that executed the corresponding call_rcu() or call_srcu().
For example, if a given CPU goes offline while having an RCU
callback pending, then that RCU callback will execute on some
surviving CPU. (If this was not the case, a self-spawning RCU
callback would prevent the victim CPU from ever going offline.)
Furthermore, CPUs designated by rcu_nocbs= might well *always*
have their RCU callbacks executed on some other CPUs, in fact,
for some real-time workloads, this is the whole point of using
the rcu_nocbs= kernel boot parameter.
13. Unlike other forms of RCU, it *is* permissible to block in an
SRCU read-side critical section (demarked by srcu_read_lock()
and srcu_read_unlock()), hence the "SRCU": "sleepable RCU".
Please note that if you don't need to sleep in read-side critical
sections, you should be using RCU rather than SRCU, because RCU
is almost always faster and easier to use than is SRCU.
Also unlike other forms of RCU, explicit initialization and
cleanup is required either at build time via DEFINE_SRCU()
or DEFINE_STATIC_SRCU() or at runtime via init_srcu_struct()
and cleanup_srcu_struct(). These last two are passed a
"struct srcu_struct" that defines the scope of a given
SRCU domain. Once initialized, the srcu_struct is passed
to srcu_read_lock(), srcu_read_unlock() synchronize_srcu(),
synchronize_srcu_expedited(), and call_srcu(). A given
synchronize_srcu() waits only for SRCU read-side critical
sections governed by srcu_read_lock() and srcu_read_unlock()
calls that have been passed the same srcu_struct. This property
is what makes sleeping read-side critical sections tolerable --
a given subsystem delays only its own updates, not those of other
subsystems using SRCU. Therefore, SRCU is less prone to OOM the
system than RCU would be if RCU's read-side critical sections
were permitted to sleep.
The ability to sleep in read-side critical sections does not
come for free. First, corresponding srcu_read_lock() and
srcu_read_unlock() calls must be passed the same srcu_struct.
Second, grace-period-detection overhead is amortized only
over those updates sharing a given srcu_struct, rather than
being globally amortized as they are for other forms of RCU.
Therefore, SRCU should be used in preference to rw_semaphore
only in extremely read-intensive situations, or in situations
requiring SRCU's read-side deadlock immunity or low read-side
realtime latency. You should also consider percpu_rw_semaphore
when you need lightweight readers.
SRCU's expedited primitive (synchronize_srcu_expedited())
never sends IPIs to other CPUs, so it is easier on
real-time workloads than is synchronize_rcu_expedited().
Note that rcu_assign_pointer() relates to SRCU just as it does to
other forms of RCU, but instead of rcu_dereference() you should
use srcu_dereference() in order to avoid lockdep splats.
14. The whole point of call_rcu(), synchronize_rcu(), and friends
is to wait until all pre-existing readers have finished before
carrying out some otherwise-destructive operation. It is
therefore critically important to *first* remove any path
that readers can follow that could be affected by the
destructive operation, and *only then* invoke call_rcu(),
synchronize_rcu(), or friends.
Because these primitives only wait for pre-existing readers, it
is the caller's responsibility to guarantee that any subsequent
readers will execute safely.
15. The various RCU read-side primitives do *not* necessarily contain
memory barriers. You should therefore plan for the CPU
and the compiler to freely reorder code into and out of RCU
read-side critical sections. It is the responsibility of the
RCU update-side primitives to deal with this.
For SRCU readers, you can use smp_mb__after_srcu_read_unlock()
immediately after an srcu_read_unlock() to get a full barrier.
16. Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
__rcu sparse checks to validate your RCU code. These can help
find problems as follows:
CONFIG_PROVE_LOCKING:
check that accesses to RCU-protected data
structures are carried out under the proper RCU
read-side critical section, while holding the right
combination of locks, or whatever other conditions
are appropriate.
CONFIG_DEBUG_OBJECTS_RCU_HEAD:
check that you don't pass the
same object to call_rcu() (or friends) before an RCU
grace period has elapsed since the last time that you
passed that same object to call_rcu() (or friends).
__rcu sparse checks:
tag the pointer to the RCU-protected data
structure with __rcu, and sparse will warn you if you
access that pointer without the services of one of the
variants of rcu_dereference().
These debugging aids can help you find problems that are
otherwise extremely difficult to spot.
17. If you register a callback using call_rcu() or call_srcu(), and
pass in a function defined within a loadable module, then it in
necessary to wait for all pending callbacks to be invoked after
the last invocation and before unloading that module. Note that
it is absolutely *not* sufficient to wait for a grace period!
The current (say) synchronize_rcu() implementation is *not*
guaranteed to wait for callbacks registered on other CPUs.
Or even on the current CPU if that CPU recently went offline
and came back online.
You instead need to use one of the barrier functions:
- call_rcu() -> rcu_barrier()
- call_srcu() -> srcu_barrier()
However, these barrier functions are absolutely *not* guaranteed
to wait for a grace period. In fact, if there are no call_rcu()
callbacks waiting anywhere in the system, rcu_barrier() is within
its rights to return immediately.
So if you need to wait for both an RCU grace period and for
all pre-existing call_rcu() callbacks, you will need to execute
both rcu_barrier() and synchronize_rcu(), if necessary, using
something like workqueues to to execute them concurrently.
See rcubarrier.rst for more information.