mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 06:34:12 +08:00
fbd2d733e3
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
479 lines
14 KiB
C
479 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
|
|
*
|
|
* Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
|
|
*
|
|
* Notes
|
|
* =====
|
|
* NXP LPC18xx provides a State Configurable Timer (SCT) which can be configured
|
|
* as a Pulse Width Modulator.
|
|
*
|
|
* SCT supports 16 outputs, 16 events and 16 registers. Each event will be
|
|
* triggered when its related register matches the SCT counter value, and it
|
|
* will set or clear a selected output.
|
|
*
|
|
* One of the events is preselected to generate the period, thus the maximum
|
|
* number of simultaneous channels is limited to 15. Notice that period is
|
|
* global to all the channels, thus PWM driver will refuse setting different
|
|
* values to it, unless there's only one channel requested.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
|
|
/* LPC18xx SCT registers */
|
|
#define LPC18XX_PWM_CONFIG 0x000
|
|
#define LPC18XX_PWM_CONFIG_UNIFY BIT(0)
|
|
#define LPC18XX_PWM_CONFIG_NORELOAD BIT(7)
|
|
|
|
#define LPC18XX_PWM_CTRL 0x004
|
|
#define LPC18XX_PWM_CTRL_HALT BIT(2)
|
|
#define LPC18XX_PWM_BIDIR BIT(4)
|
|
#define LPC18XX_PWM_PRE_SHIFT 5
|
|
#define LPC18XX_PWM_PRE_MASK (0xff << LPC18XX_PWM_PRE_SHIFT)
|
|
#define LPC18XX_PWM_PRE(x) (x << LPC18XX_PWM_PRE_SHIFT)
|
|
|
|
#define LPC18XX_PWM_LIMIT 0x008
|
|
|
|
#define LPC18XX_PWM_RES_BASE 0x058
|
|
#define LPC18XX_PWM_RES_SHIFT(_ch) (_ch * 2)
|
|
#define LPC18XX_PWM_RES(_ch, _action) (_action << LPC18XX_PWM_RES_SHIFT(_ch))
|
|
#define LPC18XX_PWM_RES_MASK(_ch) (0x3 << LPC18XX_PWM_RES_SHIFT(_ch))
|
|
|
|
#define LPC18XX_PWM_MATCH_BASE 0x100
|
|
#define LPC18XX_PWM_MATCH(_ch) (LPC18XX_PWM_MATCH_BASE + _ch * 4)
|
|
|
|
#define LPC18XX_PWM_MATCHREL_BASE 0x200
|
|
#define LPC18XX_PWM_MATCHREL(_ch) (LPC18XX_PWM_MATCHREL_BASE + _ch * 4)
|
|
|
|
#define LPC18XX_PWM_EVSTATEMSK_BASE 0x300
|
|
#define LPC18XX_PWM_EVSTATEMSK(_ch) (LPC18XX_PWM_EVSTATEMSK_BASE + _ch * 8)
|
|
#define LPC18XX_PWM_EVSTATEMSK_ALL 0xffffffff
|
|
|
|
#define LPC18XX_PWM_EVCTRL_BASE 0x304
|
|
#define LPC18XX_PWM_EVCTRL(_ev) (LPC18XX_PWM_EVCTRL_BASE + _ev * 8)
|
|
|
|
#define LPC18XX_PWM_EVCTRL_MATCH(_ch) _ch
|
|
|
|
#define LPC18XX_PWM_EVCTRL_COMB_SHIFT 12
|
|
#define LPC18XX_PWM_EVCTRL_COMB_MATCH (0x1 << LPC18XX_PWM_EVCTRL_COMB_SHIFT)
|
|
|
|
#define LPC18XX_PWM_OUTPUTSET_BASE 0x500
|
|
#define LPC18XX_PWM_OUTPUTSET(_ch) (LPC18XX_PWM_OUTPUTSET_BASE + _ch * 8)
|
|
|
|
#define LPC18XX_PWM_OUTPUTCL_BASE 0x504
|
|
#define LPC18XX_PWM_OUTPUTCL(_ch) (LPC18XX_PWM_OUTPUTCL_BASE + _ch * 8)
|
|
|
|
/* LPC18xx SCT unified counter */
|
|
#define LPC18XX_PWM_TIMER_MAX 0xffffffff
|
|
|
|
/* LPC18xx SCT events */
|
|
#define LPC18XX_PWM_EVENT_PERIOD 0
|
|
#define LPC18XX_PWM_EVENT_MAX 16
|
|
|
|
#define LPC18XX_NUM_PWMS 16
|
|
|
|
/* SCT conflict resolution */
|
|
enum lpc18xx_pwm_res_action {
|
|
LPC18XX_PWM_RES_NONE,
|
|
LPC18XX_PWM_RES_SET,
|
|
LPC18XX_PWM_RES_CLEAR,
|
|
LPC18XX_PWM_RES_TOGGLE,
|
|
};
|
|
|
|
struct lpc18xx_pwm_data {
|
|
unsigned int duty_event;
|
|
};
|
|
|
|
struct lpc18xx_pwm_chip {
|
|
struct device *dev;
|
|
struct pwm_chip chip;
|
|
void __iomem *base;
|
|
struct clk *pwm_clk;
|
|
unsigned long clk_rate;
|
|
unsigned int period_ns;
|
|
unsigned int min_period_ns;
|
|
u64 max_period_ns;
|
|
unsigned int period_event;
|
|
unsigned long event_map;
|
|
struct mutex res_lock;
|
|
struct mutex period_lock;
|
|
struct lpc18xx_pwm_data channeldata[LPC18XX_NUM_PWMS];
|
|
};
|
|
|
|
static inline struct lpc18xx_pwm_chip *
|
|
to_lpc18xx_pwm_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct lpc18xx_pwm_chip, chip);
|
|
}
|
|
|
|
static inline void lpc18xx_pwm_writel(struct lpc18xx_pwm_chip *lpc18xx_pwm,
|
|
u32 reg, u32 val)
|
|
{
|
|
writel(val, lpc18xx_pwm->base + reg);
|
|
}
|
|
|
|
static inline u32 lpc18xx_pwm_readl(struct lpc18xx_pwm_chip *lpc18xx_pwm,
|
|
u32 reg)
|
|
{
|
|
return readl(lpc18xx_pwm->base + reg);
|
|
}
|
|
|
|
static void lpc18xx_pwm_set_conflict_res(struct lpc18xx_pwm_chip *lpc18xx_pwm,
|
|
struct pwm_device *pwm,
|
|
enum lpc18xx_pwm_res_action action)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&lpc18xx_pwm->res_lock);
|
|
|
|
/*
|
|
* Simultaneous set and clear may happen on an output, that is the case
|
|
* when duty_ns == period_ns. LPC18xx SCT allows to set a conflict
|
|
* resolution action to be taken in such a case.
|
|
*/
|
|
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_RES_BASE);
|
|
val &= ~LPC18XX_PWM_RES_MASK(pwm->hwpwm);
|
|
val |= LPC18XX_PWM_RES(pwm->hwpwm, action);
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_RES_BASE, val);
|
|
|
|
mutex_unlock(&lpc18xx_pwm->res_lock);
|
|
}
|
|
|
|
static void lpc18xx_pwm_config_period(struct pwm_chip *chip, u64 period_ns)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
u32 val;
|
|
|
|
/*
|
|
* With clk_rate < NSEC_PER_SEC this cannot overflow.
|
|
* With period_ns < max_period_ns this also fits into an u32.
|
|
* As period_ns >= min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC, lpc18xx_pwm->clk_rate);
|
|
* we have val >= 1.
|
|
*/
|
|
val = mul_u64_u64_div_u64(period_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC);
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_MATCH(lpc18xx_pwm->period_event),
|
|
val - 1);
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_MATCHREL(lpc18xx_pwm->period_event),
|
|
val - 1);
|
|
}
|
|
|
|
static void lpc18xx_pwm_config_duty(struct pwm_chip *chip,
|
|
struct pwm_device *pwm, u64 duty_ns)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
|
|
u32 val;
|
|
|
|
/*
|
|
* With clk_rate <= NSEC_PER_SEC this cannot overflow.
|
|
* With duty_ns <= period_ns < max_period_ns this also fits into an u32.
|
|
*/
|
|
val = mul_u64_u64_div_u64(duty_ns, lpc18xx_pwm->clk_rate, NSEC_PER_SEC);
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_MATCH(lpc18xx_data->duty_event),
|
|
val);
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_MATCHREL(lpc18xx_data->duty_event),
|
|
val);
|
|
}
|
|
|
|
static int lpc18xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
int requested_events, i;
|
|
|
|
if (period_ns < lpc18xx_pwm->min_period_ns ||
|
|
period_ns > lpc18xx_pwm->max_period_ns) {
|
|
dev_err(chip->dev, "period %d not in range\n", period_ns);
|
|
return -ERANGE;
|
|
}
|
|
|
|
mutex_lock(&lpc18xx_pwm->period_lock);
|
|
|
|
requested_events = bitmap_weight(&lpc18xx_pwm->event_map,
|
|
LPC18XX_PWM_EVENT_MAX);
|
|
|
|
/*
|
|
* The PWM supports only a single period for all PWM channels.
|
|
* Once the period is set, it can only be changed if no more than one
|
|
* channel is requested at that moment.
|
|
*/
|
|
if (requested_events > 2 && lpc18xx_pwm->period_ns != period_ns &&
|
|
lpc18xx_pwm->period_ns) {
|
|
dev_err(chip->dev, "conflicting period requested for PWM %u\n",
|
|
pwm->hwpwm);
|
|
mutex_unlock(&lpc18xx_pwm->period_lock);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if ((requested_events <= 2 && lpc18xx_pwm->period_ns != period_ns) ||
|
|
!lpc18xx_pwm->period_ns) {
|
|
lpc18xx_pwm->period_ns = period_ns;
|
|
for (i = 0; i < chip->npwm; i++)
|
|
pwm_set_period(&chip->pwms[i], period_ns);
|
|
lpc18xx_pwm_config_period(chip, period_ns);
|
|
}
|
|
|
|
mutex_unlock(&lpc18xx_pwm->period_lock);
|
|
|
|
lpc18xx_pwm_config_duty(chip, pwm, duty_ns);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm, enum pwm_polarity polarity)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
|
|
enum lpc18xx_pwm_res_action res_action;
|
|
unsigned int set_event, clear_event;
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event),
|
|
LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_data->duty_event) |
|
|
LPC18XX_PWM_EVCTRL_COMB_MATCH);
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
|
|
LPC18XX_PWM_EVSTATEMSK_ALL);
|
|
|
|
if (polarity == PWM_POLARITY_NORMAL) {
|
|
set_event = lpc18xx_pwm->period_event;
|
|
clear_event = lpc18xx_data->duty_event;
|
|
res_action = LPC18XX_PWM_RES_SET;
|
|
} else {
|
|
set_event = lpc18xx_data->duty_event;
|
|
clear_event = lpc18xx_pwm->period_event;
|
|
res_action = LPC18XX_PWM_RES_CLEAR;
|
|
}
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm),
|
|
BIT(set_event));
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm),
|
|
BIT(clear_event));
|
|
lpc18xx_pwm_set_conflict_res(lpc18xx_pwm, pwm, res_action);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lpc18xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_EVCTRL(lpc18xx_data->duty_event), 0);
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTSET(pwm->hwpwm), 0);
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_OUTPUTCL(pwm->hwpwm), 0);
|
|
}
|
|
|
|
static int lpc18xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
|
|
unsigned long event;
|
|
|
|
event = find_first_zero_bit(&lpc18xx_pwm->event_map,
|
|
LPC18XX_PWM_EVENT_MAX);
|
|
|
|
if (event >= LPC18XX_PWM_EVENT_MAX) {
|
|
dev_err(lpc18xx_pwm->dev,
|
|
"maximum number of simultaneous channels reached\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
set_bit(event, &lpc18xx_pwm->event_map);
|
|
lpc18xx_data->duty_event = event;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lpc18xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
|
|
struct lpc18xx_pwm_data *lpc18xx_data = &lpc18xx_pwm->channeldata[pwm->hwpwm];
|
|
|
|
clear_bit(lpc18xx_data->duty_event, &lpc18xx_pwm->event_map);
|
|
}
|
|
|
|
static int lpc18xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int err;
|
|
bool enabled = pwm->state.enabled;
|
|
|
|
if (state->polarity != pwm->state.polarity && pwm->state.enabled) {
|
|
lpc18xx_pwm_disable(chip, pwm);
|
|
enabled = false;
|
|
}
|
|
|
|
if (!state->enabled) {
|
|
if (enabled)
|
|
lpc18xx_pwm_disable(chip, pwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
err = lpc18xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!enabled)
|
|
err = lpc18xx_pwm_enable(chip, pwm, state->polarity);
|
|
|
|
return err;
|
|
}
|
|
static const struct pwm_ops lpc18xx_pwm_ops = {
|
|
.apply = lpc18xx_pwm_apply,
|
|
.request = lpc18xx_pwm_request,
|
|
.free = lpc18xx_pwm_free,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id lpc18xx_pwm_of_match[] = {
|
|
{ .compatible = "nxp,lpc1850-sct-pwm" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpc18xx_pwm_of_match);
|
|
|
|
static int lpc18xx_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm;
|
|
int ret;
|
|
u64 val;
|
|
|
|
lpc18xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*lpc18xx_pwm),
|
|
GFP_KERNEL);
|
|
if (!lpc18xx_pwm)
|
|
return -ENOMEM;
|
|
|
|
lpc18xx_pwm->dev = &pdev->dev;
|
|
|
|
lpc18xx_pwm->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(lpc18xx_pwm->base))
|
|
return PTR_ERR(lpc18xx_pwm->base);
|
|
|
|
lpc18xx_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
|
|
if (IS_ERR(lpc18xx_pwm->pwm_clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(lpc18xx_pwm->pwm_clk),
|
|
"failed to get pwm clock\n");
|
|
|
|
ret = clk_prepare_enable(lpc18xx_pwm->pwm_clk);
|
|
if (ret < 0)
|
|
return dev_err_probe(&pdev->dev, ret,
|
|
"could not prepare or enable pwm clock\n");
|
|
|
|
lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
|
|
if (!lpc18xx_pwm->clk_rate) {
|
|
ret = dev_err_probe(&pdev->dev,
|
|
-EINVAL, "pwm clock has no frequency\n");
|
|
goto disable_pwmclk;
|
|
}
|
|
|
|
/*
|
|
* If clkrate is too fast, the calculations in .apply() might overflow.
|
|
*/
|
|
if (lpc18xx_pwm->clk_rate > NSEC_PER_SEC) {
|
|
ret = dev_err_probe(&pdev->dev, -EINVAL, "pwm clock to fast\n");
|
|
goto disable_pwmclk;
|
|
}
|
|
|
|
mutex_init(&lpc18xx_pwm->res_lock);
|
|
mutex_init(&lpc18xx_pwm->period_lock);
|
|
|
|
lpc18xx_pwm->max_period_ns =
|
|
mul_u64_u64_div_u64(NSEC_PER_SEC, LPC18XX_PWM_TIMER_MAX, lpc18xx_pwm->clk_rate);
|
|
|
|
lpc18xx_pwm->min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC,
|
|
lpc18xx_pwm->clk_rate);
|
|
|
|
lpc18xx_pwm->chip.dev = &pdev->dev;
|
|
lpc18xx_pwm->chip.ops = &lpc18xx_pwm_ops;
|
|
lpc18xx_pwm->chip.npwm = LPC18XX_NUM_PWMS;
|
|
|
|
/* SCT counter must be in unify (32 bit) mode */
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CONFIG,
|
|
LPC18XX_PWM_CONFIG_UNIFY);
|
|
|
|
/*
|
|
* Everytime the timer counter reaches the period value, the related
|
|
* event will be triggered and the counter reset to 0.
|
|
*/
|
|
set_bit(LPC18XX_PWM_EVENT_PERIOD, &lpc18xx_pwm->event_map);
|
|
lpc18xx_pwm->period_event = LPC18XX_PWM_EVENT_PERIOD;
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_EVSTATEMSK(lpc18xx_pwm->period_event),
|
|
LPC18XX_PWM_EVSTATEMSK_ALL);
|
|
|
|
val = LPC18XX_PWM_EVCTRL_MATCH(lpc18xx_pwm->period_event) |
|
|
LPC18XX_PWM_EVCTRL_COMB_MATCH;
|
|
lpc18xx_pwm_writel(lpc18xx_pwm,
|
|
LPC18XX_PWM_EVCTRL(lpc18xx_pwm->period_event), val);
|
|
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT,
|
|
BIT(lpc18xx_pwm->period_event));
|
|
|
|
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
|
|
val &= ~LPC18XX_PWM_BIDIR;
|
|
val &= ~LPC18XX_PWM_CTRL_HALT;
|
|
val &= ~LPC18XX_PWM_PRE_MASK;
|
|
val |= LPC18XX_PWM_PRE(0);
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
|
|
|
|
ret = pwmchip_add(&lpc18xx_pwm->chip);
|
|
if (ret < 0) {
|
|
dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
|
|
goto disable_pwmclk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, lpc18xx_pwm);
|
|
|
|
return 0;
|
|
|
|
disable_pwmclk:
|
|
clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
|
|
return ret;
|
|
}
|
|
|
|
static void lpc18xx_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct lpc18xx_pwm_chip *lpc18xx_pwm = platform_get_drvdata(pdev);
|
|
u32 val;
|
|
|
|
pwmchip_remove(&lpc18xx_pwm->chip);
|
|
|
|
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
|
|
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL,
|
|
val | LPC18XX_PWM_CTRL_HALT);
|
|
|
|
clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
|
|
}
|
|
|
|
static struct platform_driver lpc18xx_pwm_driver = {
|
|
.driver = {
|
|
.name = "lpc18xx-sct-pwm",
|
|
.of_match_table = lpc18xx_pwm_of_match,
|
|
},
|
|
.probe = lpc18xx_pwm_probe,
|
|
.remove_new = lpc18xx_pwm_remove,
|
|
};
|
|
module_platform_driver(lpc18xx_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
|
|
MODULE_DESCRIPTION("NXP LPC18xx PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|