linux/drivers/gpio/gpio-pca953x.c
Linus Torvalds 0486beaf88 GPIO bulk changes for the v5.10 kernel cycle:
Core changes:
 
 - The big core change is the updated (v2) userspace character
   device API. This corrects badly designed 64-bit alignment around
   the line events. We also add the debounce request feature.
   This echoes the often quotes passage from Frederick Brooks
   "The mythical man-month" to always throw one away, which we
   have seen before in things such as V4L2. So we put in a new
   one and deprecate and obsolete the old one.
 
 - All example tools in tools/gpio/* are migrated to the new API
   to set a good example. The libgpiod userspace library has been
   augmented to use this new API pretty much from day 1.
 
 - Some misc API hardening by using strn* function calls has been
   added as well.
 
 - Use the simpler IDA interface for GPIO chip instance enumeration.
 
 - Add device core function for counting string arrays in
   device properties.
 
 - Provide a generic library function kfree_strarray() that can
   be used throughout the kernel.
 
 Driver enhancements:
 
 - The DesignWare dwapb-gpio driver has been enhanced and now
   uses the IRQ handling in the gpiolib core.
 
 - The mockup and aggregator drivers have seen some substantial
   code clean-up and now use more of the core kernel
   inftrastructure.
 
 - Misc cleanups using dev_err_probe().
 
 - The MXC drivers (Freescale/NXP) can now be built modularized,
   which makes modularized GKI Android kernels happy.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl+FdjkACgkQQRCzN7AZ
 XXMYgQ/+JgpHrp7yS1IkS1KiAxHdeIGnKzloTCQQo1JxYEymAnIeMwo/iWAk5wHu
 NeJIEVxD0YzZwoI3BXbnO5Qy/62g1z7Ik8ToIa0TiFMwYxz5a7lqsiHwpBgHa50h
 T2N8FRFdslVrhpUYBH4Q9wlfYxTki4FwdTD6aaoFFGcMwIVJXWyaYzE+o+qEUEne
 VaPsGoNhRKTdKASP3c6+zbbPonzpZW7s/wvIBQAyBgPxEizlL97RzzX3bSSraoCX
 i0NsDLHMe+9twqE064KN+CYu0Cy80etQSQsYcfnstVshMuY9+WC1YdyJqzYMciuQ
 CYUIQBeskft86IBlsEU/fNCbV+FeAgrxRW6TJK7Hn+sUWZ5+UGdpJ03UE1hA3jjO
 SniwG0vpqvZIkio49B6h51VdjNqVJn+AE8tN3hCzqpFknblXgJOVysD7RS7rNM6D
 flV1bCsUYtC6jN43qsGFiRYLE9ml2iUxFFoBQUaAEh+pXgUzPTQqD7aSjyzmE3x2
 uapKXgxN0dCNH+tFXij73Ro4bYf4ZTZhx3Z3XoEUNEyJpl8fE1bv1SZ2EykOmK8g
 c78fAmT0vG3xYZvK10WZj4zuHV6GlPAYVm/MlhB7QHsrF3wa9vervOuqhEPmp2th
 hTsVj/Zlz0SSDLncMQL64B7gbxOmzOYlVRxIkSrDEXUOFU7kiWE=
 =8CE2
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This time very little driver changes but lots of core changes.

  We have some interesting cooperative work for ARM and Intel alike,
  making the GPIO subsystem more and more suitable for industrial
  systems and the like, in addition to the in-kernel users.

  We touch driver core (device properties) and lib/* by adding one
  simple string array free function, these are authored by Andy
  Shevchenko who is a well known and recognized core helpers maintainers
  so this should be fine.

  We also see some Android GKI-related modularization in the MXC
  drivers.

  Core changes:

   - The big core change is the updated (v2) userspace character device
     API.

     This corrects badly designed 64-bit alignment around the line
     events. We also add the debounce request feature. This echoes the
     often quotes passage from Frederick Brooks "The mythical man-month"
     to always throw one away, which we have seen before in things such
     as V4L2. So we put in a new one and deprecate and obsolete the old
     one.

   - All example tools in tools/gpio/* are migrated to the new API to
     set a good example. The libgpiod userspace library has been
     augmented to use this new API pretty much from day 1.

   - Some misc API hardening by using strn* function calls has been
     added as well.

   - Use the simpler IDA interface for GPIO chip instance enumeration.

   - Add device core function for counting string arrays in device
     properties.

   - Provide a generic library function kfree_strarray() that can be
     used throughout the kernel.

  Driver enhancements:

   - The DesignWare dwapb-gpio driver has been enhanced and now uses the
     IRQ handling in the gpiolib core.

   - The mockup and aggregator drivers have seen some substantial code
     clean-up and now use more of the core kernel inftrastructure.

   - Misc cleanups using dev_err_probe().

   - The MXC drivers (Freescale/NXP) can now be built modularized, which
     makes modularized GKI Android kernels happy"

* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
  gpiolib: Update header block in gpiolib-cdev.h
  gpiolib: cdev: switch from kstrdup() to kstrndup()
  docs: gpio: add a new document to its index.rst
  gpio: pca953x: Add support for the NXP PCAL9554B/C
  tools: gpio: add debounce support to gpio-event-mon
  tools: gpio: add multi-line monitoring to gpio-event-mon
  tools: gpio: port gpio-event-mon to v2 uAPI
  tools: gpio: port gpio-hammer to v2 uAPI
  tools: gpio: rename nlines to num_lines
  tools: gpio: port gpio-watch to v2 uAPI
  tools: gpio: port lsgpio to v2 uAPI
  gpio: uapi: document uAPI v1 as deprecated
  gpiolib: cdev: support setting debounce
  gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
  gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
  gpiolib: cdev: support edge detection for uAPI v2
  gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
  gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
  gpiolib: add build option for CDEV v1 ABI
  gpiolib: make cdev a build option
  ...
2020-10-13 10:09:33 -07:00

1313 lines
35 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* PCA953x 4/8/16/24/40 bit I/O ports
*
* Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
* Copyright (C) 2007 Marvell International Ltd.
*
* Derived from drivers/i2c/chips/pca9539.c
*/
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_data/pca953x.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#define PCA953X_INPUT 0x00
#define PCA953X_OUTPUT 0x01
#define PCA953X_INVERT 0x02
#define PCA953X_DIRECTION 0x03
#define REG_ADDR_MASK GENMASK(5, 0)
#define REG_ADDR_EXT BIT(6)
#define REG_ADDR_AI BIT(7)
#define PCA957X_IN 0x00
#define PCA957X_INVRT 0x01
#define PCA957X_BKEN 0x02
#define PCA957X_PUPD 0x03
#define PCA957X_CFG 0x04
#define PCA957X_OUT 0x05
#define PCA957X_MSK 0x06
#define PCA957X_INTS 0x07
#define PCAL953X_OUT_STRENGTH 0x20
#define PCAL953X_IN_LATCH 0x22
#define PCAL953X_PULL_EN 0x23
#define PCAL953X_PULL_SEL 0x24
#define PCAL953X_INT_MASK 0x25
#define PCAL953X_INT_STAT 0x26
#define PCAL953X_OUT_CONF 0x27
#define PCAL6524_INT_EDGE 0x28
#define PCAL6524_INT_CLR 0x2a
#define PCAL6524_IN_STATUS 0x2b
#define PCAL6524_OUT_INDCONF 0x2c
#define PCAL6524_DEBOUNCE 0x2d
#define PCA_GPIO_MASK GENMASK(7, 0)
#define PCAL_GPIO_MASK GENMASK(4, 0)
#define PCAL_PINCTRL_MASK GENMASK(6, 5)
#define PCA_INT BIT(8)
#define PCA_PCAL BIT(9)
#define PCA_LATCH_INT (PCA_PCAL | PCA_INT)
#define PCA953X_TYPE BIT(12)
#define PCA957X_TYPE BIT(13)
#define PCA_TYPE_MASK GENMASK(15, 12)
#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK)
static const struct i2c_device_id pca953x_id[] = {
{ "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
{ "pca9534", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9536", 4 | PCA953X_TYPE, },
{ "pca9537", 4 | PCA953X_TYPE | PCA_INT, },
{ "pca9538", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9554", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9556", 8 | PCA953X_TYPE, },
{ "pca9557", 8 | PCA953X_TYPE, },
{ "pca9574", 8 | PCA957X_TYPE | PCA_INT, },
{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
{ "pca9698", 40 | PCA953X_TYPE, },
{ "pcal6416", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "pcal6524", 24 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "pcal9535", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "pcal9554b", 8 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "pcal9555a", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "max7310", 8 | PCA953X_TYPE, },
{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
{ "max7315", 8 | PCA953X_TYPE | PCA_INT, },
{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca6107", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6408", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
{ "tca9554", 8 | PCA953X_TYPE | PCA_INT, },
{ "xra1202", 8 | PCA953X_TYPE },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
#ifdef CONFIG_GPIO_PCA953X_IRQ
#include <linux/dmi.h>
#include <linux/gpio.h>
#include <linux/list.h>
static const struct dmi_system_id pca953x_dmi_acpi_irq_info[] = {
{
/*
* On Intel Galileo Gen 2 board the IRQ pin of one of
* the I²C GPIO expanders, which has GpioInt() resource,
* is provided as an absolute number instead of being
* relative. Since first controller (gpio-sch.c) and
* second (gpio-dwapb.c) are at the fixed bases, we may
* safely refer to the number in the global space to get
* an IRQ out of it.
*/
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
},
},
{}
};
#ifdef CONFIG_ACPI
static int pca953x_acpi_get_pin(struct acpi_resource *ares, void *data)
{
struct acpi_resource_gpio *agpio;
int *pin = data;
if (acpi_gpio_get_irq_resource(ares, &agpio))
*pin = agpio->pin_table[0];
return 1;
}
static int pca953x_acpi_find_pin(struct device *dev)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
int pin = -ENOENT, ret;
LIST_HEAD(r);
ret = acpi_dev_get_resources(adev, &r, pca953x_acpi_get_pin, &pin);
acpi_dev_free_resource_list(&r);
if (ret < 0)
return ret;
return pin;
}
#else
static inline int pca953x_acpi_find_pin(struct device *dev) { return -ENXIO; }
#endif
static int pca953x_acpi_get_irq(struct device *dev)
{
int pin, ret;
pin = pca953x_acpi_find_pin(dev);
if (pin < 0)
return pin;
dev_info(dev, "Applying ACPI interrupt quirk (GPIO %d)\n", pin);
if (!gpio_is_valid(pin))
return -EINVAL;
ret = gpio_request(pin, "pca953x interrupt");
if (ret)
return ret;
ret = gpio_to_irq(pin);
/* When pin is used as an IRQ, no need to keep it requested */
gpio_free(pin);
return ret;
}
#endif
static const struct acpi_device_id pca953x_acpi_ids[] = {
{ "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ }
};
MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
#define MAX_BANK 5
#define BANK_SZ 8
#define MAX_LINE (MAX_BANK * BANK_SZ)
#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
struct pca953x_reg_config {
int direction;
int output;
int input;
int invert;
};
static const struct pca953x_reg_config pca953x_regs = {
.direction = PCA953X_DIRECTION,
.output = PCA953X_OUTPUT,
.input = PCA953X_INPUT,
.invert = PCA953X_INVERT,
};
static const struct pca953x_reg_config pca957x_regs = {
.direction = PCA957X_CFG,
.output = PCA957X_OUT,
.input = PCA957X_IN,
.invert = PCA957X_INVRT,
};
struct pca953x_chip {
unsigned gpio_start;
struct mutex i2c_lock;
struct regmap *regmap;
#ifdef CONFIG_GPIO_PCA953X_IRQ
struct mutex irq_lock;
DECLARE_BITMAP(irq_mask, MAX_LINE);
DECLARE_BITMAP(irq_stat, MAX_LINE);
DECLARE_BITMAP(irq_trig_raise, MAX_LINE);
DECLARE_BITMAP(irq_trig_fall, MAX_LINE);
struct irq_chip irq_chip;
#endif
atomic_t wakeup_path;
struct i2c_client *client;
struct gpio_chip gpio_chip;
const char *const *names;
unsigned long driver_data;
struct regulator *regulator;
const struct pca953x_reg_config *regs;
};
static int pca953x_bank_shift(struct pca953x_chip *chip)
{
return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
}
#define PCA953x_BANK_INPUT BIT(0)
#define PCA953x_BANK_OUTPUT BIT(1)
#define PCA953x_BANK_POLARITY BIT(2)
#define PCA953x_BANK_CONFIG BIT(3)
#define PCA957x_BANK_INPUT BIT(0)
#define PCA957x_BANK_POLARITY BIT(1)
#define PCA957x_BANK_BUSHOLD BIT(2)
#define PCA957x_BANK_CONFIG BIT(4)
#define PCA957x_BANK_OUTPUT BIT(5)
#define PCAL9xxx_BANK_IN_LATCH BIT(8 + 2)
#define PCAL9xxx_BANK_PULL_EN BIT(8 + 3)
#define PCAL9xxx_BANK_PULL_SEL BIT(8 + 4)
#define PCAL9xxx_BANK_IRQ_MASK BIT(8 + 5)
#define PCAL9xxx_BANK_IRQ_STAT BIT(8 + 6)
/*
* We care about the following registers:
* - Standard set, below 0x40, each port can be replicated up to 8 times
* - PCA953x standard
* Input port 0x00 + 0 * bank_size R
* Output port 0x00 + 1 * bank_size RW
* Polarity Inversion port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 3 * bank_size RW
* - PCA957x with mixed up registers
* Input port 0x00 + 0 * bank_size R
* Polarity Inversion port 0x00 + 1 * bank_size RW
* Bus hold port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 4 * bank_size RW
* Output port 0x00 + 5 * bank_size RW
*
* - Extended set, above 0x40, often chip specific.
* - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
* Input latch register 0x40 + 2 * bank_size RW
* Pull-up/pull-down enable reg 0x40 + 3 * bank_size RW
* Pull-up/pull-down select reg 0x40 + 4 * bank_size RW
* Interrupt mask register 0x40 + 5 * bank_size RW
* Interrupt status register 0x40 + 6 * bank_size R
*
* - Registers with bit 0x80 set, the AI bit
* The bit is cleared and the registers fall into one of the
* categories above.
*/
static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
u32 checkbank)
{
int bank_shift = pca953x_bank_shift(chip);
int bank = (reg & REG_ADDR_MASK) >> bank_shift;
int offset = reg & (BIT(bank_shift) - 1);
/* Special PCAL extended register check. */
if (reg & REG_ADDR_EXT) {
if (!(chip->driver_data & PCA_PCAL))
return false;
bank += 8;
}
/* Register is not in the matching bank. */
if (!(BIT(bank) & checkbank))
return false;
/* Register is not within allowed range of bank. */
if (offset >= NBANK(chip))
return false;
return true;
}
static bool pca953x_readable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL) {
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK |
PCAL9xxx_BANK_IRQ_STAT;
}
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK;
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
bank = PCA953x_BANK_INPUT;
else
bank = PCA957x_BANK_INPUT;
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IRQ_STAT;
return pca953x_check_register(chip, reg, bank);
}
static const struct regmap_config pca953x_i2c_regmap = {
.reg_bits = 8,
.val_bits = 8,
.readable_reg = pca953x_readable_register,
.writeable_reg = pca953x_writeable_register,
.volatile_reg = pca953x_volatile_register,
.disable_locking = true,
.cache_type = REGCACHE_RBTREE,
.max_register = 0x7f,
};
static const struct regmap_config pca953x_ai_i2c_regmap = {
.reg_bits = 8,
.val_bits = 8,
.read_flag_mask = REG_ADDR_AI,
.write_flag_mask = REG_ADDR_AI,
.readable_reg = pca953x_readable_register,
.writeable_reg = pca953x_writeable_register,
.volatile_reg = pca953x_volatile_register,
.disable_locking = true,
.cache_type = REGCACHE_RBTREE,
.max_register = 0x7f,
};
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off)
{
int bank_shift = pca953x_bank_shift(chip);
int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
u8 regaddr = pinctrl | addr | (off / BANK_SZ);
return regaddr;
}
static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
{
u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
u8 value[MAX_BANK];
int i, ret;
for (i = 0; i < NBANK(chip); i++)
value[i] = bitmap_get_value8(val, i * BANK_SZ);
ret = regmap_bulk_write(chip->regmap, regaddr, value, NBANK(chip));
if (ret < 0) {
dev_err(&chip->client->dev, "failed writing register\n");
return ret;
}
return 0;
}
static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
{
u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
u8 value[MAX_BANK];
int i, ret;
ret = regmap_bulk_read(chip->regmap, regaddr, value, NBANK(chip));
if (ret < 0) {
dev_err(&chip->client->dev, "failed reading register\n");
return ret;
}
for (i = 0; i < NBANK(chip); i++)
bitmap_set_value8(val, value[i], i * BANK_SZ);
return 0;
}
static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_direction_output(struct gpio_chip *gc,
unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
/* set output level */
ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
if (ret)
goto exit;
/* then direction */
ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
exit:
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off);
u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_read(chip->regmap, inreg, &reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0) {
/*
* NOTE:
* diagnostic already emitted; that's all we should
* do unless gpio_*_value_cansleep() calls become different
* from their nonsleeping siblings (and report faults).
*/
return 0;
}
return !!(reg_val & bit);
}
static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
u8 bit = BIT(off % BANK_SZ);
mutex_lock(&chip->i2c_lock);
regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
mutex_unlock(&chip->i2c_lock);
}
static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_read(chip->regmap, dirreg, &reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0)
return ret;
if (reg_val & bit)
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
}
static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
DECLARE_BITMAP(reg_val, MAX_LINE);
int ret;
mutex_lock(&chip->i2c_lock);
ret = pca953x_read_regs(chip, chip->regs->input, reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret)
return ret;
bitmap_replace(bits, bits, reg_val, mask, gc->ngpio);
return 0;
}
static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
DECLARE_BITMAP(reg_val, MAX_LINE);
int ret;
mutex_lock(&chip->i2c_lock);
ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
if (ret)
goto exit;
bitmap_replace(reg_val, reg_val, bits, mask, gc->ngpio);
pca953x_write_regs(chip, chip->regs->output, reg_val);
exit:
mutex_unlock(&chip->i2c_lock);
}
static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
unsigned int offset,
unsigned long config)
{
u8 pull_en_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_EN, offset);
u8 pull_sel_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_SEL, offset);
u8 bit = BIT(offset % BANK_SZ);
int ret;
/*
* pull-up/pull-down configuration requires PCAL extended
* registers
*/
if (!(chip->driver_data & PCA_PCAL))
return -ENOTSUPP;
mutex_lock(&chip->i2c_lock);
/* Disable pull-up/pull-down */
ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
if (ret)
goto exit;
/* Configure pull-up/pull-down */
if (config == PIN_CONFIG_BIAS_PULL_UP)
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
else if (config == PIN_CONFIG_BIAS_PULL_DOWN)
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
if (ret)
goto exit;
/* Enable pull-up/pull-down */
ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
exit:
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
unsigned long config)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
switch (pinconf_to_config_param(config)) {
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
return pca953x_gpio_set_pull_up_down(chip, offset, config);
default:
return -ENOTSUPP;
}
}
static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
{
struct gpio_chip *gc;
gc = &chip->gpio_chip;
gc->direction_input = pca953x_gpio_direction_input;
gc->direction_output = pca953x_gpio_direction_output;
gc->get = pca953x_gpio_get_value;
gc->set = pca953x_gpio_set_value;
gc->get_direction = pca953x_gpio_get_direction;
gc->get_multiple = pca953x_gpio_get_multiple;
gc->set_multiple = pca953x_gpio_set_multiple;
gc->set_config = pca953x_gpio_set_config;
gc->can_sleep = true;
gc->base = chip->gpio_start;
gc->ngpio = gpios;
gc->label = dev_name(&chip->client->dev);
gc->parent = &chip->client->dev;
gc->owner = THIS_MODULE;
gc->names = chip->names;
}
#ifdef CONFIG_GPIO_PCA953X_IRQ
static void pca953x_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
clear_bit(hwirq, chip->irq_mask);
}
static void pca953x_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
set_bit(hwirq, chip->irq_mask);
}
static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
if (on)
atomic_inc(&chip->wakeup_path);
else
atomic_dec(&chip->wakeup_path);
return irq_set_irq_wake(chip->client->irq, on);
}
static void pca953x_irq_bus_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
mutex_lock(&chip->irq_lock);
}
static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
DECLARE_BITMAP(irq_mask, MAX_LINE);
DECLARE_BITMAP(reg_direction, MAX_LINE);
int level;
if (chip->driver_data & PCA_PCAL) {
/* Enable latch on interrupt-enabled inputs */
pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
bitmap_complement(irq_mask, chip->irq_mask, gc->ngpio);
/* Unmask enabled interrupts */
pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
}
/* Switch direction to input if needed */
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio);
bitmap_complement(reg_direction, reg_direction, gc->ngpio);
bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
/* Look for any newly setup interrupt */
for_each_set_bit(level, irq_mask, gc->ngpio)
pca953x_gpio_direction_input(&chip->gpio_chip, level);
mutex_unlock(&chip->irq_lock);
}
static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
d->irq, type);
return -EINVAL;
}
assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
return 0;
}
static void pca953x_irq_shutdown(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
clear_bit(hwirq, chip->irq_trig_raise);
clear_bit(hwirq, chip->irq_trig_fall);
}
static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)
{
struct gpio_chip *gc = &chip->gpio_chip;
DECLARE_BITMAP(reg_direction, MAX_LINE);
DECLARE_BITMAP(old_stat, MAX_LINE);
DECLARE_BITMAP(cur_stat, MAX_LINE);
DECLARE_BITMAP(new_stat, MAX_LINE);
DECLARE_BITMAP(trigger, MAX_LINE);
int ret;
if (chip->driver_data & PCA_PCAL) {
/* Read the current interrupt status from the device */
ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
if (ret)
return false;
/* Check latched inputs and clear interrupt status */
ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
if (ret)
return false;
/* Apply filter for rising/falling edge selection */
bitmap_replace(new_stat, chip->irq_trig_fall, chip->irq_trig_raise, cur_stat, gc->ngpio);
bitmap_and(pending, new_stat, trigger, gc->ngpio);
return !bitmap_empty(pending, gc->ngpio);
}
ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
if (ret)
return false;
/* Remove output pins from the equation */
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
bitmap_copy(old_stat, chip->irq_stat, gc->ngpio);
bitmap_and(new_stat, cur_stat, reg_direction, gc->ngpio);
bitmap_xor(cur_stat, new_stat, old_stat, gc->ngpio);
bitmap_and(trigger, cur_stat, chip->irq_mask, gc->ngpio);
if (bitmap_empty(trigger, gc->ngpio))
return false;
bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
bitmap_and(cur_stat, chip->irq_trig_fall, old_stat, gc->ngpio);
bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio);
bitmap_or(new_stat, old_stat, cur_stat, gc->ngpio);
bitmap_and(pending, new_stat, trigger, gc->ngpio);
return !bitmap_empty(pending, gc->ngpio);
}
static irqreturn_t pca953x_irq_handler(int irq, void *devid)
{
struct pca953x_chip *chip = devid;
struct gpio_chip *gc = &chip->gpio_chip;
DECLARE_BITMAP(pending, MAX_LINE);
int level;
bool ret;
bitmap_zero(pending, MAX_LINE);
mutex_lock(&chip->i2c_lock);
ret = pca953x_irq_pending(chip, pending);
mutex_unlock(&chip->i2c_lock);
if (ret) {
ret = 0;
for_each_set_bit(level, pending, gc->ngpio) {
int nested_irq = irq_find_mapping(gc->irq.domain, level);
if (unlikely(nested_irq <= 0)) {
dev_warn_ratelimited(gc->parent, "unmapped interrupt %d\n", level);
continue;
}
handle_nested_irq(nested_irq);
ret = 1;
}
}
return IRQ_RETVAL(ret);
}
static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
{
struct i2c_client *client = chip->client;
struct irq_chip *irq_chip = &chip->irq_chip;
DECLARE_BITMAP(reg_direction, MAX_LINE);
DECLARE_BITMAP(irq_stat, MAX_LINE);
struct gpio_irq_chip *girq;
int ret;
if (dmi_first_match(pca953x_dmi_acpi_irq_info)) {
ret = pca953x_acpi_get_irq(&client->dev);
if (ret > 0)
client->irq = ret;
}
if (!client->irq)
return 0;
if (irq_base == -1)
return 0;
if (!(chip->driver_data & PCA_INT))
return 0;
ret = pca953x_read_regs(chip, chip->regs->input, irq_stat);
if (ret)
return ret;
/*
* There is no way to know which GPIO line generated the
* interrupt. We have to rely on the previous read for
* this purpose.
*/
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
bitmap_and(chip->irq_stat, irq_stat, reg_direction, chip->gpio_chip.ngpio);
mutex_init(&chip->irq_lock);
irq_chip->name = dev_name(&client->dev);
irq_chip->irq_mask = pca953x_irq_mask;
irq_chip->irq_unmask = pca953x_irq_unmask;
irq_chip->irq_set_wake = pca953x_irq_set_wake;
irq_chip->irq_bus_lock = pca953x_irq_bus_lock;
irq_chip->irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock;
irq_chip->irq_set_type = pca953x_irq_set_type;
irq_chip->irq_shutdown = pca953x_irq_shutdown;
girq = &chip->gpio_chip.irq;
girq->chip = irq_chip;
/* This will let us handle the parent IRQ in the driver */
girq->parent_handler = NULL;
girq->num_parents = 0;
girq->parents = NULL;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_simple_irq;
girq->threaded = true;
girq->first = irq_base; /* FIXME: get rid of this */
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pca953x_irq_handler,
IRQF_ONESHOT | IRQF_SHARED,
dev_name(&client->dev), chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
return ret;
}
return 0;
}
#else /* CONFIG_GPIO_PCA953X_IRQ */
static int pca953x_irq_setup(struct pca953x_chip *chip,
int irq_base)
{
struct i2c_client *client = chip->client;
if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
dev_warn(&client->dev, "interrupt support not compiled in\n");
return 0;
}
#endif
static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
{
DECLARE_BITMAP(val, MAX_LINE);
int ret;
ret = regcache_sync_region(chip->regmap, chip->regs->output,
chip->regs->output + NBANK(chip));
if (ret)
goto out;
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
chip->regs->direction + NBANK(chip));
if (ret)
goto out;
/* set platform specific polarity inversion */
if (invert)
bitmap_fill(val, MAX_LINE);
else
bitmap_zero(val, MAX_LINE);
ret = pca953x_write_regs(chip, chip->regs->invert, val);
out:
return ret;
}
static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
{
DECLARE_BITMAP(val, MAX_LINE);
unsigned int i;
int ret;
ret = device_pca95xx_init(chip, invert);
if (ret)
goto out;
/* To enable register 6, 7 to control pull up and pull down */
for (i = 0; i < NBANK(chip); i++)
bitmap_set_value8(val, 0x02, i * BANK_SZ);
ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
if (ret)
goto out;
return 0;
out:
return ret;
}
static int pca953x_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int irq_base = 0;
int ret;
u32 invert = 0;
struct regulator *reg;
const struct regmap_config *regmap_config;
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
pdata = dev_get_platdata(&client->dev);
if (pdata) {
irq_base = pdata->irq_base;
chip->gpio_start = pdata->gpio_base;
invert = pdata->invert;
chip->names = pdata->names;
} else {
struct gpio_desc *reset_gpio;
chip->gpio_start = -1;
irq_base = 0;
/*
* See if we need to de-assert a reset pin.
*
* There is no known ACPI-enabled platforms that are
* using "reset" GPIO. Otherwise any of those platform
* must use _DSD method with corresponding property.
*/
reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(reset_gpio))
return PTR_ERR(reset_gpio);
}
chip->client = client;
reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(reg))
return dev_err_probe(&client->dev, PTR_ERR(reg), "reg get err\n");
ret = regulator_enable(reg);
if (ret) {
dev_err(&client->dev, "reg en err: %d\n", ret);
return ret;
}
chip->regulator = reg;
if (i2c_id) {
chip->driver_data = i2c_id->driver_data;
} else {
const void *match;
match = device_get_match_data(&client->dev);
if (!match) {
ret = -ENODEV;
goto err_exit;
}
chip->driver_data = (uintptr_t)match;
}
i2c_set_clientdata(client, chip);
pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
dev_info(&client->dev, "using AI\n");
regmap_config = &pca953x_ai_i2c_regmap;
} else {
dev_info(&client->dev, "using no AI\n");
regmap_config = &pca953x_i2c_regmap;
}
chip->regmap = devm_regmap_init_i2c(client, regmap_config);
if (IS_ERR(chip->regmap)) {
ret = PTR_ERR(chip->regmap);
goto err_exit;
}
regcache_mark_dirty(chip->regmap);
mutex_init(&chip->i2c_lock);
/*
* In case we have an i2c-mux controlled by a GPIO provided by an
* expander using the same driver higher on the device tree, read the
* i2c adapter nesting depth and use the retrieved value as lockdep
* subclass for chip->i2c_lock.
*
* REVISIT: This solution is not complete. It protects us from lockdep
* false positives when the expander controlling the i2c-mux is on
* a different level on the device tree, but not when it's on the same
* level on a different branch (in which case the subclass number
* would be the same).
*
* TODO: Once a correct solution is developed, a similar fix should be
* applied to all other i2c-controlled GPIO expanders (and potentially
* regmap-i2c).
*/
lockdep_set_subclass(&chip->i2c_lock,
i2c_adapter_depth(client->adapter));
/* initialize cached registers from their original values.
* we can't share this chip with another i2c master.
*/
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
chip->regs = &pca953x_regs;
ret = device_pca95xx_init(chip, invert);
} else {
chip->regs = &pca957x_regs;
ret = device_pca957x_init(chip, invert);
}
if (ret)
goto err_exit;
ret = pca953x_irq_setup(chip, irq_base);
if (ret)
goto err_exit;
ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
if (ret)
goto err_exit;
if (pdata && pdata->setup) {
ret = pdata->setup(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_warn(&client->dev, "setup failed, %d\n", ret);
}
return 0;
err_exit:
regulator_disable(chip->regulator);
return ret;
}
static int pca953x_remove(struct i2c_client *client)
{
struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev);
struct pca953x_chip *chip = i2c_get_clientdata(client);
int ret;
if (pdata && pdata->teardown) {
ret = pdata->teardown(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_err(&client->dev, "teardown failed, %d\n", ret);
} else {
ret = 0;
}
regulator_disable(chip->regulator);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int pca953x_regcache_sync(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
int ret;
/*
* The ordering between direction and output is important,
* sync these registers first and only then sync the rest.
*/
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
chip->regs->direction + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
return ret;
}
ret = regcache_sync_region(chip->regmap, chip->regs->output,
chip->regs->output + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
return ret;
}
#ifdef CONFIG_GPIO_PCA953X_IRQ
if (chip->driver_data & PCA_PCAL) {
ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH,
PCAL953X_IN_LATCH + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync INT latch registers: %d\n",
ret);
return ret;
}
ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK,
PCAL953X_INT_MASK + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync INT mask registers: %d\n",
ret);
return ret;
}
}
#endif
return 0;
}
static int pca953x_suspend(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
regcache_cache_only(chip->regmap, true);
if (atomic_read(&chip->wakeup_path))
device_set_wakeup_path(dev);
else
regulator_disable(chip->regulator);
return 0;
}
static int pca953x_resume(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
int ret;
if (!atomic_read(&chip->wakeup_path)) {
ret = regulator_enable(chip->regulator);
if (ret) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return 0;
}
}
regcache_cache_only(chip->regmap, false);
regcache_mark_dirty(chip->regmap);
ret = pca953x_regcache_sync(dev);
if (ret)
return ret;
ret = regcache_sync(chip->regmap);
if (ret) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
return ret;
}
return 0;
}
#endif
/* convenience to stop overlong match-table lines */
#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
static const struct of_device_id pca953x_dt_ids[] = {
{ .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
{ .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
{ .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
{ .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
{ .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
{ .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
{ .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
{ .compatible = "nxp,pcal6416", .data = OF_953X(16, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal9535", .data = OF_953X(16, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal9554b", .data = OF_953X( 8, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
{ .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
{ .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
{ .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
{ .compatible = "ti,tca9539", .data = OF_953X(16, PCA_INT), },
{ .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
{ }
};
MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
static struct i2c_driver pca953x_driver = {
.driver = {
.name = "pca953x",
.pm = &pca953x_pm_ops,
.of_match_table = pca953x_dt_ids,
.acpi_match_table = pca953x_acpi_ids,
},
.probe = pca953x_probe,
.remove = pca953x_remove,
.id_table = pca953x_id,
};
static int __init pca953x_init(void)
{
return i2c_add_driver(&pca953x_driver);
}
/* register after i2c postcore initcall and before
* subsys initcalls that may rely on these GPIOs
*/
subsys_initcall(pca953x_init);
static void __exit pca953x_exit(void)
{
i2c_del_driver(&pca953x_driver);
}
module_exit(pca953x_exit);
MODULE_AUTHOR("eric miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
MODULE_LICENSE("GPL");