mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
0795af5729
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
666 lines
19 KiB
C
666 lines
19 KiB
C
/*
|
|
* macsonic.c
|
|
*
|
|
* (C) 2005 Finn Thain
|
|
*
|
|
* Converted to DMA API, converted to unified driver model, made it work as
|
|
* a module again, and from the mac68k project, introduced more 32-bit cards
|
|
* and dhd's support for 16-bit cards.
|
|
*
|
|
* (C) 1998 Alan Cox
|
|
*
|
|
* Debugging Andreas Ehliar, Michael Schmitz
|
|
*
|
|
* Based on code
|
|
* (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
|
|
*
|
|
* This driver is based on work from Andreas Busse, but most of
|
|
* the code is rewritten.
|
|
*
|
|
* (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
|
|
*
|
|
* A driver for the Mac onboard Sonic ethernet chip.
|
|
*
|
|
* 98/12/21 MSch: judged from tests on Q800, it's basically working,
|
|
* but eating up both receive and transmit resources
|
|
* and duplicating packets. Needs more testing.
|
|
*
|
|
* 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
|
|
*
|
|
* 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
|
|
* on centris.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/nubus.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/bitrev.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/io.h>
|
|
#include <asm/hwtest.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/macintosh.h>
|
|
#include <asm/macints.h>
|
|
#include <asm/mac_via.h>
|
|
|
|
static char mac_sonic_string[] = "macsonic";
|
|
static struct platform_device *mac_sonic_device;
|
|
|
|
#include "sonic.h"
|
|
|
|
/* These should basically be bus-size and endian independent (since
|
|
the SONIC is at least smart enough that it uses the same endianness
|
|
as the host, unlike certain less enlightened Macintosh NICs) */
|
|
#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
|
|
+ lp->reg_offset))
|
|
#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
|
|
+ lp->reg_offset))
|
|
|
|
/* use 0 for production, 1 for verification, >1 for debug */
|
|
#ifdef SONIC_DEBUG
|
|
static unsigned int sonic_debug = SONIC_DEBUG;
|
|
#else
|
|
static unsigned int sonic_debug = 1;
|
|
#endif
|
|
|
|
static int sonic_version_printed;
|
|
|
|
extern int mac_onboard_sonic_probe(struct net_device* dev);
|
|
extern int mac_nubus_sonic_probe(struct net_device* dev);
|
|
|
|
/* For onboard SONIC */
|
|
#define ONBOARD_SONIC_REGISTERS 0x50F0A000
|
|
#define ONBOARD_SONIC_PROM_BASE 0x50f08000
|
|
|
|
enum macsonic_type {
|
|
MACSONIC_DUODOCK,
|
|
MACSONIC_APPLE,
|
|
MACSONIC_APPLE16,
|
|
MACSONIC_DAYNA,
|
|
MACSONIC_DAYNALINK
|
|
};
|
|
|
|
/* For the built-in SONIC in the Duo Dock */
|
|
#define DUODOCK_SONIC_REGISTERS 0xe10000
|
|
#define DUODOCK_SONIC_PROM_BASE 0xe12000
|
|
|
|
/* For Apple-style NuBus SONIC */
|
|
#define APPLE_SONIC_REGISTERS 0
|
|
#define APPLE_SONIC_PROM_BASE 0x40000
|
|
|
|
/* Daynalink LC SONIC */
|
|
#define DAYNALINK_PROM_BASE 0x400000
|
|
|
|
/* For Dayna-style NuBus SONIC (haven't seen one yet) */
|
|
#define DAYNA_SONIC_REGISTERS 0x180000
|
|
/* This is what OpenBSD says. However, this is definitely in NuBus
|
|
ROM space so we should be able to get it by walking the NuBus
|
|
resource directories */
|
|
#define DAYNA_SONIC_MAC_ADDR 0xffe004
|
|
|
|
#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
|
|
|
|
/*
|
|
* For reversing the PROM address
|
|
*/
|
|
|
|
static inline void bit_reverse_addr(unsigned char addr[6])
|
|
{
|
|
int i;
|
|
|
|
for(i = 0; i < 6; i++)
|
|
addr[i] = bitrev8(addr[i]);
|
|
}
|
|
|
|
static irqreturn_t macsonic_interrupt(int irq, void *dev_id)
|
|
{
|
|
irqreturn_t result;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
result = sonic_interrupt(irq, dev_id);
|
|
local_irq_restore(flags);
|
|
return result;
|
|
}
|
|
|
|
static int macsonic_open(struct net_device* dev)
|
|
{
|
|
if (request_irq(dev->irq, &sonic_interrupt, IRQ_FLG_FAST, "sonic", dev)) {
|
|
printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
|
|
return -EAGAIN;
|
|
}
|
|
/* Under the A/UX interrupt scheme, the onboard SONIC interrupt comes
|
|
* in at priority level 3. However, we sometimes get the level 2 inter-
|
|
* rupt as well, which must prevent re-entrance of the sonic handler.
|
|
*/
|
|
if (dev->irq == IRQ_AUTO_3)
|
|
if (request_irq(IRQ_NUBUS_9, &macsonic_interrupt, IRQ_FLG_FAST, "sonic", dev)) {
|
|
printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, IRQ_NUBUS_9);
|
|
free_irq(dev->irq, dev);
|
|
return -EAGAIN;
|
|
}
|
|
return sonic_open(dev);
|
|
}
|
|
|
|
static int macsonic_close(struct net_device* dev)
|
|
{
|
|
int err;
|
|
err = sonic_close(dev);
|
|
free_irq(dev->irq, dev);
|
|
if (dev->irq == IRQ_AUTO_3)
|
|
free_irq(IRQ_NUBUS_9, dev);
|
|
return err;
|
|
}
|
|
|
|
int __init macsonic_init(struct net_device* dev)
|
|
{
|
|
struct sonic_local* lp = netdev_priv(dev);
|
|
|
|
/* Allocate the entire chunk of memory for the descriptors.
|
|
Note that this cannot cross a 64K boundary. */
|
|
if ((lp->descriptors = dma_alloc_coherent(lp->device,
|
|
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
|
|
&lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
|
|
printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Now set up the pointers to point to the appropriate places */
|
|
lp->cda = lp->descriptors;
|
|
lp->tda = lp->cda + (SIZEOF_SONIC_CDA
|
|
* SONIC_BUS_SCALE(lp->dma_bitmode));
|
|
lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
|
|
* SONIC_BUS_SCALE(lp->dma_bitmode));
|
|
lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
|
|
* SONIC_BUS_SCALE(lp->dma_bitmode));
|
|
|
|
lp->cda_laddr = lp->descriptors_laddr;
|
|
lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
|
|
* SONIC_BUS_SCALE(lp->dma_bitmode));
|
|
lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
|
|
* SONIC_BUS_SCALE(lp->dma_bitmode));
|
|
lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
|
|
* SONIC_BUS_SCALE(lp->dma_bitmode));
|
|
|
|
dev->open = macsonic_open;
|
|
dev->stop = macsonic_close;
|
|
dev->hard_start_xmit = sonic_send_packet;
|
|
dev->get_stats = sonic_get_stats;
|
|
dev->set_multicast_list = &sonic_multicast_list;
|
|
dev->tx_timeout = sonic_tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
/*
|
|
* clear tally counter
|
|
*/
|
|
SONIC_WRITE(SONIC_CRCT, 0xffff);
|
|
SONIC_WRITE(SONIC_FAET, 0xffff);
|
|
SONIC_WRITE(SONIC_MPT, 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
|
|
{
|
|
struct sonic_local *lp = netdev_priv(dev);
|
|
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
|
|
int i;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/* On NuBus boards we can sometimes look in the ROM resources.
|
|
No such luck for comm-slot/onboard. */
|
|
for(i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = SONIC_READ_PROM(i);
|
|
|
|
/* Most of the time, the address is bit-reversed. The NetBSD
|
|
source has a rather long and detailed historical account of
|
|
why this is so. */
|
|
if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\x05\x02", 3))
|
|
bit_reverse_addr(dev->dev_addr);
|
|
else
|
|
return 0;
|
|
|
|
/* If we still have what seems to be a bogus address, we'll
|
|
look in the CAM. The top entry should be ours. */
|
|
/* Danger! This only works if MacOS has already initialized
|
|
the card... */
|
|
if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\x05\x02", 3))
|
|
{
|
|
unsigned short val;
|
|
|
|
printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
|
|
|
|
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
|
|
SONIC_WRITE(SONIC_CEP, 15);
|
|
|
|
val = SONIC_READ(SONIC_CAP2);
|
|
dev->dev_addr[5] = val >> 8;
|
|
dev->dev_addr[4] = val & 0xff;
|
|
val = SONIC_READ(SONIC_CAP1);
|
|
dev->dev_addr[3] = val >> 8;
|
|
dev->dev_addr[2] = val & 0xff;
|
|
val = SONIC_READ(SONIC_CAP0);
|
|
dev->dev_addr[1] = val >> 8;
|
|
dev->dev_addr[0] = val & 0xff;
|
|
|
|
printk(KERN_INFO "HW Address from CAM 15: %s\n",
|
|
print_mac(mac, dev->dev_addr));
|
|
} else return 0;
|
|
|
|
if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
|
|
memcmp(dev->dev_addr, "\x00\x05\x02", 3))
|
|
{
|
|
/*
|
|
* Still nonsense ... messed up someplace!
|
|
*/
|
|
printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n");
|
|
return -EIO;
|
|
} else return 0;
|
|
}
|
|
|
|
int __init mac_onboard_sonic_probe(struct net_device* dev)
|
|
{
|
|
/* Bwahahaha */
|
|
static int once_is_more_than_enough;
|
|
struct sonic_local* lp = netdev_priv(dev);
|
|
int sr;
|
|
int commslot = 0;
|
|
|
|
if (once_is_more_than_enough)
|
|
return -ENODEV;
|
|
once_is_more_than_enough = 1;
|
|
|
|
if (!MACH_IS_MAC)
|
|
return -ENODEV;
|
|
|
|
if (macintosh_config->ether_type != MAC_ETHER_SONIC)
|
|
return -ENODEV;
|
|
|
|
printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
|
|
|
|
/* Bogus probing, on the models which may or may not have
|
|
Ethernet (BTW, the Ethernet *is* always at the same
|
|
address, and nothing else lives there, at least if Apple's
|
|
documentation is to be believed) */
|
|
if (macintosh_config->ident == MAC_MODEL_Q630 ||
|
|
macintosh_config->ident == MAC_MODEL_P588 ||
|
|
macintosh_config->ident == MAC_MODEL_P575 ||
|
|
macintosh_config->ident == MAC_MODEL_C610) {
|
|
unsigned long flags;
|
|
int card_present;
|
|
|
|
local_irq_save(flags);
|
|
card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
|
|
local_irq_restore(flags);
|
|
|
|
if (!card_present) {
|
|
printk("none.\n");
|
|
return -ENODEV;
|
|
}
|
|
commslot = 1;
|
|
}
|
|
|
|
printk("yes\n");
|
|
|
|
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
|
|
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
|
|
dev->base_addr = ONBOARD_SONIC_REGISTERS;
|
|
if (via_alt_mapping)
|
|
dev->irq = IRQ_AUTO_3;
|
|
else
|
|
dev->irq = IRQ_NUBUS_9;
|
|
|
|
if (!sonic_version_printed) {
|
|
printk(KERN_INFO "%s", version);
|
|
sonic_version_printed = 1;
|
|
}
|
|
printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
|
|
lp->device->bus_id, dev->base_addr);
|
|
|
|
/* The PowerBook's SONIC is 16 bit always. */
|
|
if (macintosh_config->ident == MAC_MODEL_PB520) {
|
|
lp->reg_offset = 0;
|
|
lp->dma_bitmode = SONIC_BITMODE16;
|
|
sr = SONIC_READ(SONIC_SR);
|
|
} else if (commslot) {
|
|
/* Some of the comm-slot cards are 16 bit. But some
|
|
of them are not. The 32-bit cards use offset 2 and
|
|
have known revisions, we try reading the revision
|
|
register at offset 2, if we don't get a known revision
|
|
we assume 16 bit at offset 0. */
|
|
lp->reg_offset = 2;
|
|
lp->dma_bitmode = SONIC_BITMODE16;
|
|
|
|
sr = SONIC_READ(SONIC_SR);
|
|
if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
|
|
/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
|
|
lp->dma_bitmode = SONIC_BITMODE32;
|
|
else {
|
|
lp->dma_bitmode = SONIC_BITMODE16;
|
|
lp->reg_offset = 0;
|
|
sr = SONIC_READ(SONIC_SR);
|
|
}
|
|
} else {
|
|
/* All onboard cards are at offset 2 with 32 bit DMA. */
|
|
lp->reg_offset = 2;
|
|
lp->dma_bitmode = SONIC_BITMODE32;
|
|
sr = SONIC_READ(SONIC_SR);
|
|
}
|
|
printk(KERN_INFO
|
|
"%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
|
|
lp->device->bus_id, sr, lp->dma_bitmode?32:16, lp->reg_offset);
|
|
|
|
#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
|
|
printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
|
|
SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
|
|
#endif
|
|
|
|
/* Software reset, then initialize control registers. */
|
|
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
|
|
|
|
SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
|
|
SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
|
|
(lp->dma_bitmode ? SONIC_DCR_DW : 0));
|
|
|
|
/* This *must* be written back to in order to restore the
|
|
* extended programmable output bits, as it may not have been
|
|
* initialised since the hardware reset. */
|
|
SONIC_WRITE(SONIC_DCR2, 0);
|
|
|
|
/* Clear *and* disable interrupts to be on the safe side */
|
|
SONIC_WRITE(SONIC_IMR, 0);
|
|
SONIC_WRITE(SONIC_ISR, 0x7fff);
|
|
|
|
/* Now look for the MAC address. */
|
|
if (mac_onboard_sonic_ethernet_addr(dev) != 0)
|
|
return -ENODEV;
|
|
|
|
/* Shared init code */
|
|
return macsonic_init(dev);
|
|
}
|
|
|
|
int __init mac_nubus_sonic_ethernet_addr(struct net_device* dev,
|
|
unsigned long prom_addr,
|
|
int id)
|
|
{
|
|
int i;
|
|
for(i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = SONIC_READ_PROM(i);
|
|
|
|
/* Some of the addresses are bit-reversed */
|
|
if (id != MACSONIC_DAYNA)
|
|
bit_reverse_addr(dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init macsonic_ident(struct nubus_dev* ndev)
|
|
{
|
|
if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
|
|
ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
|
|
return MACSONIC_DAYNALINK;
|
|
if (ndev->dr_hw == NUBUS_DRHW_SONIC &&
|
|
ndev->dr_sw == NUBUS_DRSW_APPLE) {
|
|
/* There has to be a better way to do this... */
|
|
if (strstr(ndev->board->name, "DuoDock"))
|
|
return MACSONIC_DUODOCK;
|
|
else
|
|
return MACSONIC_APPLE;
|
|
}
|
|
|
|
if (ndev->dr_hw == NUBUS_DRHW_SMC9194 &&
|
|
ndev->dr_sw == NUBUS_DRSW_DAYNA)
|
|
return MACSONIC_DAYNA;
|
|
|
|
if (ndev->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&
|
|
ndev->dr_sw == 0) { /* huh? */
|
|
return MACSONIC_APPLE16;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int __init mac_nubus_sonic_probe(struct net_device* dev)
|
|
{
|
|
static int slots;
|
|
struct nubus_dev* ndev = NULL;
|
|
struct sonic_local* lp = netdev_priv(dev);
|
|
unsigned long base_addr, prom_addr;
|
|
u16 sonic_dcr;
|
|
int id = -1;
|
|
int reg_offset, dma_bitmode;
|
|
|
|
/* Find the first SONIC that hasn't been initialized already */
|
|
while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK,
|
|
NUBUS_TYPE_ETHERNET, ndev)) != NULL)
|
|
{
|
|
/* Have we seen it already? */
|
|
if (slots & (1<<ndev->board->slot))
|
|
continue;
|
|
slots |= 1<<ndev->board->slot;
|
|
|
|
/* Is it one of ours? */
|
|
if ((id = macsonic_ident(ndev)) != -1)
|
|
break;
|
|
}
|
|
|
|
if (ndev == NULL)
|
|
return -ENODEV;
|
|
|
|
switch (id) {
|
|
case MACSONIC_DUODOCK:
|
|
base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS;
|
|
prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE;
|
|
sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
|
|
SONIC_DCR_TFT0;
|
|
reg_offset = 2;
|
|
dma_bitmode = SONIC_BITMODE32;
|
|
break;
|
|
case MACSONIC_APPLE:
|
|
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
|
|
prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
|
|
sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
|
|
reg_offset = 0;
|
|
dma_bitmode = SONIC_BITMODE32;
|
|
break;
|
|
case MACSONIC_APPLE16:
|
|
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
|
|
prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
|
|
sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
|
|
SONIC_DCR_PO1 | SONIC_DCR_BMS;
|
|
reg_offset = 0;
|
|
dma_bitmode = SONIC_BITMODE16;
|
|
break;
|
|
case MACSONIC_DAYNALINK:
|
|
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
|
|
prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE;
|
|
sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
|
|
SONIC_DCR_PO1 | SONIC_DCR_BMS;
|
|
reg_offset = 0;
|
|
dma_bitmode = SONIC_BITMODE16;
|
|
break;
|
|
case MACSONIC_DAYNA:
|
|
base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS;
|
|
prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR;
|
|
sonic_dcr = SONIC_DCR_BMS |
|
|
SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
|
|
reg_offset = 0;
|
|
dma_bitmode = SONIC_BITMODE16;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
|
|
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
|
|
dev->base_addr = base_addr;
|
|
lp->reg_offset = reg_offset;
|
|
lp->dma_bitmode = dma_bitmode;
|
|
dev->irq = SLOT2IRQ(ndev->board->slot);
|
|
|
|
if (!sonic_version_printed) {
|
|
printk(KERN_INFO "%s", version);
|
|
sonic_version_printed = 1;
|
|
}
|
|
printk(KERN_INFO "%s: %s in slot %X\n",
|
|
lp->device->bus_id, ndev->board->name, ndev->board->slot);
|
|
printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
|
|
lp->device->bus_id, SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
|
|
|
|
#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
|
|
printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
|
|
SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
|
|
#endif
|
|
|
|
/* Software reset, then initialize control registers. */
|
|
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
|
|
SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
|
|
/* This *must* be written back to in order to restore the
|
|
* extended programmable output bits, since it may not have been
|
|
* initialised since the hardware reset. */
|
|
SONIC_WRITE(SONIC_DCR2, 0);
|
|
|
|
/* Clear *and* disable interrupts to be on the safe side */
|
|
SONIC_WRITE(SONIC_IMR, 0);
|
|
SONIC_WRITE(SONIC_ISR, 0x7fff);
|
|
|
|
/* Now look for the MAC address. */
|
|
if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0)
|
|
return -ENODEV;
|
|
|
|
/* Shared init code */
|
|
return macsonic_init(dev);
|
|
}
|
|
|
|
static int __init mac_sonic_probe(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
struct sonic_local *lp;
|
|
int err;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
dev = alloc_etherdev(sizeof(struct sonic_local));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->device = &pdev->dev;
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/* This will catch fatal stuff like -ENOMEM as well as success */
|
|
err = mac_onboard_sonic_probe(dev);
|
|
if (err == 0)
|
|
goto found;
|
|
if (err != -ENODEV)
|
|
goto out;
|
|
err = mac_nubus_sonic_probe(dev);
|
|
if (err)
|
|
goto out;
|
|
found:
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out;
|
|
|
|
printk("%s: MAC %s IRQ %d\n",
|
|
dev->name, print_mac(mac, dev->dev_addr), dev->irq);
|
|
|
|
return 0;
|
|
|
|
out:
|
|
free_netdev(dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
|
|
module_param(sonic_debug, int, 0);
|
|
MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
|
|
|
|
#include "sonic.c"
|
|
|
|
static int __devexit mac_sonic_device_remove (struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct sonic_local* lp = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
|
|
lp->descriptors, lp->descriptors_laddr);
|
|
free_netdev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mac_sonic_driver = {
|
|
.probe = mac_sonic_probe,
|
|
.remove = __devexit_p(mac_sonic_device_remove),
|
|
.driver = {
|
|
.name = mac_sonic_string,
|
|
},
|
|
};
|
|
|
|
static int __init mac_sonic_init_module(void)
|
|
{
|
|
int err;
|
|
|
|
if ((err = platform_driver_register(&mac_sonic_driver))) {
|
|
printk(KERN_ERR "Driver registration failed\n");
|
|
return err;
|
|
}
|
|
|
|
mac_sonic_device = platform_device_alloc(mac_sonic_string, 0);
|
|
if (!mac_sonic_device)
|
|
goto out_unregister;
|
|
|
|
if (platform_device_add(mac_sonic_device)) {
|
|
platform_device_put(mac_sonic_device);
|
|
mac_sonic_device = NULL;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_unregister:
|
|
platform_driver_unregister(&mac_sonic_driver);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void __exit mac_sonic_cleanup_module(void)
|
|
{
|
|
platform_driver_unregister(&mac_sonic_driver);
|
|
|
|
if (mac_sonic_device) {
|
|
platform_device_unregister(mac_sonic_device);
|
|
mac_sonic_device = NULL;
|
|
}
|
|
}
|
|
|
|
module_init(mac_sonic_init_module);
|
|
module_exit(mac_sonic_cleanup_module);
|