mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
644930cbad
Turned from arch/arm/mach-mmp/devices.c into a proper PHY driver, so that in can be instantiated from a DT. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
346 lines
9.7 KiB
C
346 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
|
|
* Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
|
|
*/
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* phy regs */
|
|
#define UTMI_REVISION 0x0
|
|
#define UTMI_CTRL 0x4
|
|
#define UTMI_PLL 0x8
|
|
#define UTMI_TX 0xc
|
|
#define UTMI_RX 0x10
|
|
#define UTMI_IVREF 0x14
|
|
#define UTMI_T0 0x18
|
|
#define UTMI_T1 0x1c
|
|
#define UTMI_T2 0x20
|
|
#define UTMI_T3 0x24
|
|
#define UTMI_T4 0x28
|
|
#define UTMI_T5 0x2c
|
|
#define UTMI_RESERVE 0x30
|
|
#define UTMI_USB_INT 0x34
|
|
#define UTMI_DBG_CTL 0x38
|
|
#define UTMI_OTG_ADDON 0x3c
|
|
|
|
/* For UTMICTRL Register */
|
|
#define UTMI_CTRL_USB_CLK_EN (1 << 31)
|
|
/* pxa168 */
|
|
#define UTMI_CTRL_SUSPEND_SET1 (1 << 30)
|
|
#define UTMI_CTRL_SUSPEND_SET2 (1 << 29)
|
|
#define UTMI_CTRL_RXBUF_PDWN (1 << 24)
|
|
#define UTMI_CTRL_TXBUF_PDWN (1 << 11)
|
|
|
|
#define UTMI_CTRL_INPKT_DELAY_SHIFT 30
|
|
#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28
|
|
#define UTMI_CTRL_PU_REF_SHIFT 20
|
|
#define UTMI_CTRL_ARC_PULLDN_SHIFT 12
|
|
#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1
|
|
#define UTMI_CTRL_PWR_UP_SHIFT 0
|
|
|
|
/* For UTMI_PLL Register */
|
|
#define UTMI_PLL_PLLCALI12_SHIFT 29
|
|
#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29)
|
|
|
|
#define UTMI_PLL_PLLVDD18_SHIFT 27
|
|
#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27)
|
|
|
|
#define UTMI_PLL_PLLVDD12_SHIFT 25
|
|
#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25)
|
|
|
|
#define UTMI_PLL_CLK_BLK_EN_SHIFT 24
|
|
#define CLK_BLK_EN (0x1 << 24)
|
|
#define PLL_READY (0x1 << 23)
|
|
#define KVCO_EXT (0x1 << 22)
|
|
#define VCOCAL_START (0x1 << 21)
|
|
|
|
#define UTMI_PLL_KVCO_SHIFT 15
|
|
#define UTMI_PLL_KVCO_MASK (0x7 << 15)
|
|
|
|
#define UTMI_PLL_ICP_SHIFT 12
|
|
#define UTMI_PLL_ICP_MASK (0x7 << 12)
|
|
|
|
#define UTMI_PLL_FBDIV_SHIFT 4
|
|
#define UTMI_PLL_FBDIV_MASK (0xFF << 4)
|
|
|
|
#define UTMI_PLL_REFDIV_SHIFT 0
|
|
#define UTMI_PLL_REFDIV_MASK (0xF << 0)
|
|
|
|
/* For UTMI_TX Register */
|
|
#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27
|
|
#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27)
|
|
|
|
#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26
|
|
#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26)
|
|
|
|
#define UTMI_TX_TXVDD12_SHIFT 22
|
|
#define UTMI_TX_TXVDD12_MASK (0x3 << 22)
|
|
|
|
#define UTMI_TX_CK60_PHSEL_SHIFT 17
|
|
#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17)
|
|
|
|
#define UTMI_TX_IMPCAL_VTH_SHIFT 14
|
|
#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14)
|
|
|
|
#define REG_RCAL_START (0x1 << 12)
|
|
|
|
#define UTMI_TX_LOW_VDD_EN_SHIFT 11
|
|
|
|
#define UTMI_TX_AMP_SHIFT 0
|
|
#define UTMI_TX_AMP_MASK (0x7 << 0)
|
|
|
|
/* For UTMI_RX Register */
|
|
#define UTMI_REG_SQ_LENGTH_SHIFT 15
|
|
#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15)
|
|
|
|
#define UTMI_RX_SQ_THRESH_SHIFT 4
|
|
#define UTMI_RX_SQ_THRESH_MASK (0xf << 4)
|
|
|
|
#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
|
|
|
|
enum pxa_usb_phy_version {
|
|
PXA_USB_PHY_MMP2,
|
|
PXA_USB_PHY_PXA910,
|
|
PXA_USB_PHY_PXA168,
|
|
};
|
|
|
|
struct pxa_usb_phy {
|
|
struct phy *phy;
|
|
void __iomem *base;
|
|
enum pxa_usb_phy_version version;
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* The registers read/write routines
|
|
*****************************************************************************/
|
|
|
|
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
|
|
{
|
|
return readl_relaxed(base + offset);
|
|
}
|
|
|
|
static void u2o_set(void __iomem *base, unsigned int offset,
|
|
unsigned int value)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl_relaxed(base + offset);
|
|
reg |= value;
|
|
writel_relaxed(reg, base + offset);
|
|
readl_relaxed(base + offset);
|
|
}
|
|
|
|
static void u2o_clear(void __iomem *base, unsigned int offset,
|
|
unsigned int value)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl_relaxed(base + offset);
|
|
reg &= ~value;
|
|
writel_relaxed(reg, base + offset);
|
|
readl_relaxed(base + offset);
|
|
}
|
|
|
|
static void u2o_write(void __iomem *base, unsigned int offset,
|
|
unsigned int value)
|
|
{
|
|
writel_relaxed(value, base + offset);
|
|
readl_relaxed(base + offset);
|
|
}
|
|
|
|
static int pxa_usb_phy_init(struct phy *phy)
|
|
{
|
|
struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy);
|
|
void __iomem *base = pxa_usb_phy->base;
|
|
int loops;
|
|
|
|
dev_info(&phy->dev, "initializing Marvell PXA USB PHY");
|
|
|
|
/* Initialize the USB PHY power */
|
|
if (pxa_usb_phy->version == PXA_USB_PHY_PXA910) {
|
|
u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
|
|
| (1<<UTMI_CTRL_PU_REF_SHIFT));
|
|
}
|
|
|
|
u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
|
|
u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
|
|
|
|
/* UTMI_PLL settings */
|
|
u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
|
|
| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
|
|
| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
|
|
| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
|
|
|
|
u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
|
|
| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
|
|
| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
|
|
| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
|
|
|
|
/* UTMI_TX */
|
|
u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
|
|
| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
|
|
| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
|
|
| UTMI_TX_AMP_MASK);
|
|
u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
|
|
| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
|
|
| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
|
|
|
|
/* UTMI_RX */
|
|
u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
|
|
| UTMI_REG_SQ_LENGTH_MASK);
|
|
u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
|
|
| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
|
|
|
|
/* UTMI_IVREF */
|
|
if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) {
|
|
/*
|
|
* fixing Microsoft Altair board interface with NEC hub issue -
|
|
* Set UTMI_IVREF from 0x4a3 to 0x4bf
|
|
*/
|
|
u2o_write(base, UTMI_IVREF, 0x4bf);
|
|
}
|
|
|
|
/* toggle VCOCAL_START bit of UTMI_PLL */
|
|
udelay(200);
|
|
u2o_set(base, UTMI_PLL, VCOCAL_START);
|
|
udelay(40);
|
|
u2o_clear(base, UTMI_PLL, VCOCAL_START);
|
|
|
|
/* toggle REG_RCAL_START bit of UTMI_TX */
|
|
udelay(400);
|
|
u2o_set(base, UTMI_TX, REG_RCAL_START);
|
|
udelay(40);
|
|
u2o_clear(base, UTMI_TX, REG_RCAL_START);
|
|
udelay(400);
|
|
|
|
/* Make sure PHY PLL is ready */
|
|
loops = 0;
|
|
while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
|
|
mdelay(1);
|
|
loops++;
|
|
if (loops > 100) {
|
|
dev_warn(&phy->dev, "calibrate timeout, UTMI_PLL %x\n",
|
|
u2o_get(base, UTMI_PLL));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) {
|
|
u2o_set(base, UTMI_RESERVE, 1 << 5);
|
|
/* Turn on UTMI PHY OTG extension */
|
|
u2o_write(base, UTMI_OTG_ADDON, 1);
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int pxa_usb_phy_exit(struct phy *phy)
|
|
{
|
|
struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy);
|
|
void __iomem *base = pxa_usb_phy->base;
|
|
|
|
dev_info(&phy->dev, "deinitializing Marvell PXA USB PHY");
|
|
|
|
if (pxa_usb_phy->version == PXA_USB_PHY_PXA168)
|
|
u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
|
|
|
|
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
|
|
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
|
|
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
|
|
u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
|
|
u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops pxa_usb_phy_ops = {
|
|
.init = pxa_usb_phy_init,
|
|
.exit = pxa_usb_phy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id pxa_usb_phy_of_match[] = {
|
|
{
|
|
.compatible = "marvell,mmp2-usb-phy",
|
|
.data = (void *)PXA_USB_PHY_MMP2,
|
|
}, {
|
|
.compatible = "marvell,pxa910-usb-phy",
|
|
.data = (void *)PXA_USB_PHY_PXA910,
|
|
}, {
|
|
.compatible = "marvell,pxa168-usb-phy",
|
|
.data = (void *)PXA_USB_PHY_PXA168,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pxa_usb_phy_of_match);
|
|
|
|
static int pxa_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *resource;
|
|
struct pxa_usb_phy *pxa_usb_phy;
|
|
struct phy_provider *provider;
|
|
const struct of_device_id *of_id;
|
|
|
|
pxa_usb_phy = devm_kzalloc(dev, sizeof(struct pxa_usb_phy), GFP_KERNEL);
|
|
if (!pxa_usb_phy)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_node(pxa_usb_phy_of_match, dev->of_node);
|
|
if (of_id)
|
|
pxa_usb_phy->version = (enum pxa_usb_phy_version)of_id->data;
|
|
else
|
|
pxa_usb_phy->version = PXA_USB_PHY_MMP2;
|
|
|
|
resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pxa_usb_phy->base = devm_ioremap_resource(dev, resource);
|
|
if (IS_ERR(pxa_usb_phy->base)) {
|
|
dev_err(dev, "failed to remap PHY regs\n");
|
|
return PTR_ERR(pxa_usb_phy->base);
|
|
}
|
|
|
|
pxa_usb_phy->phy = devm_phy_create(dev, NULL, &pxa_usb_phy_ops);
|
|
if (IS_ERR(pxa_usb_phy->phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(pxa_usb_phy->phy);
|
|
}
|
|
|
|
phy_set_drvdata(pxa_usb_phy->phy, pxa_usb_phy);
|
|
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
if (IS_ERR(provider)) {
|
|
dev_err(dev, "failed to register PHY provider\n");
|
|
return PTR_ERR(provider);
|
|
}
|
|
|
|
if (!dev->of_node) {
|
|
phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-udc");
|
|
phy_create_lookup(pxa_usb_phy->phy, "usb", "pxa-u2oehci");
|
|
phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-otg");
|
|
}
|
|
|
|
dev_info(dev, "Marvell PXA USB PHY");
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pxa_usb_phy_driver = {
|
|
.probe = pxa_usb_phy_probe,
|
|
.driver = {
|
|
.name = "pxa-usb-phy",
|
|
.of_match_table = pxa_usb_phy_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(pxa_usb_phy_driver);
|
|
|
|
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
|
|
MODULE_DESCRIPTION("Marvell PXA USB PHY Driver");
|
|
MODULE_LICENSE("GPL v2");
|