linux/fs/ext4/mballoc.h
Ojaswin Mujoo 7e170922f0 ext4: Add allocation criteria 1.5 (CR1_5)
CR1_5 aims to optimize allocations which can't be satisfied in CR1. The
fact that we couldn't find a group in CR1 suggests that it would be
difficult to find a continuous extent to compleltely satisfy our
allocations. So before falling to the slower CR2, in CR1.5 we
proactively trim the the preallocations so we can find a group with
(free / fragments) big enough.  This speeds up our allocation at the
cost of slightly reduced preallocation.

The patch also adds a new sysfs tunable:

* /sys/fs/ext4/<partition>/mb_cr1_5_max_trim_order

This controls how much CR1.5 can trim a request before falling to CR2.
For example, for a request of order 7 and max trim order 2, CR1.5 can
trim this upto order 5.

Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/150fdf65c8e4cc4dba71e020ce0859bcf636a5ff.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-06-26 19:34:56 -04:00

253 lines
6.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* fs/ext4/mballoc.h
*
* Written by: Alex Tomas <alex@clusterfs.com>
*
*/
#ifndef _EXT4_MBALLOC_H
#define _EXT4_MBALLOC_H
#include <linux/time.h>
#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/module.h>
#include <linux/swap.h>
#include <linux/proc_fs.h>
#include <linux/pagemap.h>
#include <linux/seq_file.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include "ext4_jbd2.h"
#include "ext4.h"
/*
* mb_debug() dynamic printk msgs could be used to debug mballoc code.
*/
#ifdef CONFIG_EXT4_DEBUG
#define mb_debug(sb, fmt, ...) \
pr_debug("[%s/%d] EXT4-fs (%s): (%s, %d): %s: " fmt, \
current->comm, task_pid_nr(current), sb->s_id, \
__FILE__, __LINE__, __func__, ##__VA_ARGS__)
#else
#define mb_debug(sb, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
#endif
#define EXT4_MB_HISTORY_ALLOC 1 /* allocation */
#define EXT4_MB_HISTORY_PREALLOC 2 /* preallocated blocks used */
/*
* How long mballoc can look for a best extent (in found extents)
*/
#define MB_DEFAULT_MAX_TO_SCAN 200
/*
* How long mballoc must look for a best extent
*/
#define MB_DEFAULT_MIN_TO_SCAN 10
/*
* with 's_mb_stats' allocator will collect stats that will be
* shown at umount. The collecting costs though!
*/
#define MB_DEFAULT_STATS 0
/*
* files smaller than MB_DEFAULT_STREAM_THRESHOLD are served
* by the stream allocator, which purpose is to pack requests
* as close each to other as possible to produce smooth I/O traffic
* We use locality group prealloc space for stream request.
* We can tune the same via /proc/fs/ext4/<partition>/stream_req
*/
#define MB_DEFAULT_STREAM_THRESHOLD 16 /* 64K */
/*
* for which requests use 2^N search using buddies
*/
#define MB_DEFAULT_ORDER2_REQS 2
/*
* default group prealloc size 512 blocks
*/
#define MB_DEFAULT_GROUP_PREALLOC 512
/*
* Number of groups to search linearly before performing group scanning
* optimization.
*/
#define MB_DEFAULT_LINEAR_LIMIT 4
/*
* Minimum number of groups that should be present in the file system to perform
* group scanning optimizations.
*/
#define MB_DEFAULT_LINEAR_SCAN_THRESHOLD 16
/*
* The maximum order upto which CR1.5 can trim a particular allocation request.
* Example, if we have an order 7 request and max trim order of 3, CR1.5 can
* trim this upto order 4.
*/
#define MB_DEFAULT_CR1_5_TRIM_ORDER 3
/*
* Number of valid buddy orders
*/
#define MB_NUM_ORDERS(sb) ((sb)->s_blocksize_bits + 2)
struct ext4_free_data {
/* this links the free block information from sb_info */
struct list_head efd_list;
/* this links the free block information from group_info */
struct rb_node efd_node;
/* group which free block extent belongs */
ext4_group_t efd_group;
/* free block extent */
ext4_grpblk_t efd_start_cluster;
ext4_grpblk_t efd_count;
/* transaction which freed this extent */
tid_t efd_tid;
};
struct ext4_prealloc_space {
union {
struct rb_node inode_node; /* for inode PA rbtree */
struct list_head lg_list; /* for lg PAs */
} pa_node;
struct list_head pa_group_list;
union {
struct list_head pa_tmp_list;
struct rcu_head pa_rcu;
} u;
spinlock_t pa_lock;
atomic_t pa_count;
unsigned pa_deleted;
ext4_fsblk_t pa_pstart; /* phys. block */
ext4_lblk_t pa_lstart; /* log. block */
ext4_grpblk_t pa_len; /* len of preallocated chunk */
ext4_grpblk_t pa_free; /* how many blocks are free */
unsigned short pa_type; /* pa type. inode or group */
union {
rwlock_t *inode_lock; /* locks the rbtree holding this PA */
spinlock_t *lg_lock; /* locks the lg list holding this PA */
} pa_node_lock;
struct inode *pa_inode; /* used to get the inode during group discard */
};
enum {
MB_INODE_PA = 0,
MB_GROUP_PA = 1
};
struct ext4_free_extent {
ext4_lblk_t fe_logical;
ext4_grpblk_t fe_start; /* In cluster units */
ext4_group_t fe_group;
ext4_grpblk_t fe_len; /* In cluster units */
};
/*
* Locality group:
* we try to group all related changes together
* so that writeback can flush/allocate them together as well
* Size of lg_prealloc_list hash is determined by MB_DEFAULT_GROUP_PREALLOC
* (512). We store prealloc space into the hash based on the pa_free blocks
* order value.ie, fls(pa_free)-1;
*/
#define PREALLOC_TB_SIZE 10
struct ext4_locality_group {
/* for allocator */
/* to serialize allocates */
struct mutex lg_mutex;
/* list of preallocations */
struct list_head lg_prealloc_list[PREALLOC_TB_SIZE];
spinlock_t lg_prealloc_lock;
};
struct ext4_allocation_context {
struct inode *ac_inode;
struct super_block *ac_sb;
/* original request */
struct ext4_free_extent ac_o_ex;
/* goal request (normalized ac_o_ex) */
struct ext4_free_extent ac_g_ex;
/* the best found extent */
struct ext4_free_extent ac_b_ex;
/* copy of the best found extent taken before preallocation efforts */
struct ext4_free_extent ac_f_ex;
/*
* goal len can change in CR1.5, so save the original len. This is
* used while adjusting the PA window and for accounting.
*/
ext4_grpblk_t ac_orig_goal_len;
__u32 ac_groups_considered;
__u32 ac_flags; /* allocation hints */
__u16 ac_groups_scanned;
__u16 ac_groups_linear_remaining;
__u16 ac_found;
__u16 ac_cX_found[EXT4_MB_NUM_CRS];
__u16 ac_tail;
__u16 ac_buddy;
__u8 ac_status;
__u8 ac_criteria;
__u8 ac_2order; /* if request is to allocate 2^N blocks and
* N > 0, the field stores N, otherwise 0 */
__u8 ac_op; /* operation, for history only */
struct page *ac_bitmap_page;
struct page *ac_buddy_page;
struct ext4_prealloc_space *ac_pa;
struct ext4_locality_group *ac_lg;
};
#define AC_STATUS_CONTINUE 1
#define AC_STATUS_FOUND 2
#define AC_STATUS_BREAK 3
struct ext4_buddy {
struct page *bd_buddy_page;
void *bd_buddy;
struct page *bd_bitmap_page;
void *bd_bitmap;
struct ext4_group_info *bd_info;
struct super_block *bd_sb;
__u16 bd_blkbits;
ext4_group_t bd_group;
};
static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
struct ext4_free_extent *fex)
{
return ext4_group_first_block_no(sb, fex->fe_group) +
(fex->fe_start << EXT4_SB(sb)->s_cluster_bits);
}
typedef int (*ext4_mballoc_query_range_fn)(
struct super_block *sb,
ext4_group_t agno,
ext4_grpblk_t start,
ext4_grpblk_t len,
void *priv);
int
ext4_mballoc_query_range(
struct super_block *sb,
ext4_group_t agno,
ext4_grpblk_t start,
ext4_grpblk_t end,
ext4_mballoc_query_range_fn formatter,
void *priv);
#endif