mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 17:54:13 +08:00
6d106e0cac
The watchdog driver for the SUPERIO chip winbond w83627ehf does not work. If you open /dev/watchdog and write a character to /dev/watchdog then the watchdog will be triggered. However the watchdog will not trigger the hardware RESET after the timeout, because the watchdog has never been enabled. Signed-off-by: Herman Morsink Vollenbroek <h.morsinkvollenbroek@home.nl> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
386 lines
8.9 KiB
C
386 lines
8.9 KiB
C
/*
|
|
* w83627hf/thf WDT driver
|
|
*
|
|
* (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
|
|
* added support for W83627THF.
|
|
*
|
|
* (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
|
|
*
|
|
* Based on advantechwdt.c which is based on wdt.c.
|
|
* Original copyright messages:
|
|
*
|
|
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
|
|
*
|
|
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
|
|
* warranty for any of this software. This material is provided
|
|
* "AS-IS" and at no charge.
|
|
*
|
|
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
|
|
#define PFX WATCHDOG_NAME ": "
|
|
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
|
|
|
|
static unsigned long wdt_is_open;
|
|
static char expect_close;
|
|
static DEFINE_SPINLOCK(io_lock);
|
|
|
|
/* You must set this - there is no sane way to probe for this board. */
|
|
static int wdt_io = 0x2E;
|
|
module_param(wdt_io, int, 0);
|
|
MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
|
|
|
|
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
|
|
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
|
|
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
/*
|
|
* Kernel methods.
|
|
*/
|
|
|
|
#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
|
|
#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
|
|
(same as EFER) */
|
|
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
|
|
|
|
static void w83627hf_select_wd_register(void)
|
|
{
|
|
unsigned char c;
|
|
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
|
|
outb_p(0x87, WDT_EFER); /* Again according to manual */
|
|
|
|
outb(0x20, WDT_EFER); /* check chip version */
|
|
c = inb(WDT_EFDR);
|
|
if (c == 0x82) { /* W83627THF */
|
|
outb_p(0x2b, WDT_EFER); /* select GPIO3 */
|
|
c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
|
|
outb_p(0x2b, WDT_EFER);
|
|
outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
|
|
} else if (c == 0x88 || c == 0xa0) { /* W83627EHF / W83627DHG */
|
|
outb_p(0x2d, WDT_EFER); /* select GPIO5 */
|
|
c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
|
|
outb_p(0x2d, WDT_EFER);
|
|
outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
|
|
}
|
|
|
|
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
|
|
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
|
|
outb_p(0x30, WDT_EFER); /* select CR30 */
|
|
outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
|
|
}
|
|
|
|
static void w83627hf_unselect_wd_register(void)
|
|
{
|
|
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
|
|
}
|
|
|
|
/* tyan motherboards seem to set F5 to 0x4C ?
|
|
* So explicitly init to appropriate value. */
|
|
|
|
static void w83627hf_init(void)
|
|
{
|
|
unsigned char t;
|
|
|
|
w83627hf_select_wd_register();
|
|
|
|
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
|
|
t = inb_p(WDT_EFDR); /* read CRF6 */
|
|
if (t != 0) {
|
|
printk(KERN_INFO PFX
|
|
"Watchdog already running. Resetting timeout to %d sec\n",
|
|
timeout);
|
|
outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
|
|
}
|
|
|
|
outb_p(0xF5, WDT_EFER); /* Select CRF5 */
|
|
t = inb_p(WDT_EFDR); /* read CRF5 */
|
|
t &= ~0x0C; /* set second mode & disable keyboard
|
|
turning off watchdog */
|
|
t |= 0x02; /* enable the WDTO# output low pulse
|
|
to the KBRST# pin (PIN60) */
|
|
outb_p(t, WDT_EFDR); /* Write back to CRF5 */
|
|
|
|
outb_p(0xF7, WDT_EFER); /* Select CRF7 */
|
|
t = inb_p(WDT_EFDR); /* read CRF7 */
|
|
t &= ~0xC0; /* disable keyboard & mouse turning off
|
|
watchdog */
|
|
outb_p(t, WDT_EFDR); /* Write back to CRF7 */
|
|
|
|
w83627hf_unselect_wd_register();
|
|
}
|
|
|
|
static void wdt_ctrl(int timeout)
|
|
{
|
|
spin_lock(&io_lock);
|
|
|
|
w83627hf_select_wd_register();
|
|
|
|
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
|
|
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
|
|
|
|
w83627hf_unselect_wd_register();
|
|
|
|
spin_unlock(&io_lock);
|
|
}
|
|
|
|
static int wdt_ping(void)
|
|
{
|
|
wdt_ctrl(timeout);
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_disable(void)
|
|
{
|
|
wdt_ctrl(0);
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_set_heartbeat(int t)
|
|
{
|
|
if (t < 1 || t > 255)
|
|
return -EINVAL;
|
|
timeout = t;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t wdt_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
if (count) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
expect_close = 0;
|
|
|
|
for (i = 0; i != count; i++) {
|
|
char c;
|
|
if (get_user(c, buf + i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
expect_close = 42;
|
|
}
|
|
}
|
|
wdt_ping();
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
int new_timeout;
|
|
static const struct watchdog_info ident = {
|
|
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
|
|
WDIOF_MAGICCLOSE,
|
|
.firmware_version = 1,
|
|
.identity = "W83627HF WDT",
|
|
};
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
return -EFAULT;
|
|
break;
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, p);
|
|
case WDIOC_SETOPTIONS:
|
|
{
|
|
int options, retval = -EINVAL;
|
|
|
|
if (get_user(options, p))
|
|
return -EFAULT;
|
|
if (options & WDIOS_DISABLECARD) {
|
|
wdt_disable();
|
|
retval = 0;
|
|
}
|
|
if (options & WDIOS_ENABLECARD) {
|
|
wdt_ping();
|
|
retval = 0;
|
|
}
|
|
return retval;
|
|
}
|
|
case WDIOC_KEEPALIVE:
|
|
wdt_ping();
|
|
break;
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(new_timeout, p))
|
|
return -EFAULT;
|
|
if (wdt_set_heartbeat(new_timeout))
|
|
return -EINVAL;
|
|
wdt_ping();
|
|
/* Fall */
|
|
case WDIOC_GETTIMEOUT:
|
|
return put_user(timeout, p);
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &wdt_is_open))
|
|
return -EBUSY;
|
|
/*
|
|
* Activate
|
|
*/
|
|
|
|
wdt_ping();
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int wdt_close(struct inode *inode, struct file *file)
|
|
{
|
|
if (expect_close == 42)
|
|
wdt_disable();
|
|
else {
|
|
printk(KERN_CRIT PFX
|
|
"Unexpected close, not stopping watchdog!\n");
|
|
wdt_ping();
|
|
}
|
|
expect_close = 0;
|
|
clear_bit(0, &wdt_is_open);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Notifier for system down
|
|
*/
|
|
|
|
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
|
|
void *unused)
|
|
{
|
|
if (code == SYS_DOWN || code == SYS_HALT)
|
|
wdt_disable(); /* Turn the WDT off */
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/*
|
|
* Kernel Interfaces
|
|
*/
|
|
|
|
static const struct file_operations wdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = wdt_write,
|
|
.unlocked_ioctl = wdt_ioctl,
|
|
.open = wdt_open,
|
|
.release = wdt_close,
|
|
};
|
|
|
|
static struct miscdevice wdt_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &wdt_fops,
|
|
};
|
|
|
|
/*
|
|
* The WDT needs to learn about soft shutdowns in order to
|
|
* turn the timebomb registers off.
|
|
*/
|
|
|
|
static struct notifier_block wdt_notifier = {
|
|
.notifier_call = wdt_notify_sys,
|
|
};
|
|
|
|
static int __init wdt_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising.\n");
|
|
|
|
if (wdt_set_heartbeat(timeout)) {
|
|
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
|
|
printk(KERN_INFO PFX
|
|
"timeout value must be 1 <= timeout <= 255, using %d\n",
|
|
WATCHDOG_TIMEOUT);
|
|
}
|
|
|
|
if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
|
|
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
|
|
wdt_io);
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
w83627hf_init();
|
|
|
|
ret = register_reboot_notifier(&wdt_notifier);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR PFX
|
|
"cannot register reboot notifier (err=%d)\n", ret);
|
|
goto unreg_regions;
|
|
}
|
|
|
|
ret = misc_register(&wdt_miscdev);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR PFX
|
|
"cannot register miscdev on minor=%d (err=%d)\n",
|
|
WATCHDOG_MINOR, ret);
|
|
goto unreg_reboot;
|
|
}
|
|
|
|
printk(KERN_INFO PFX
|
|
"initialized. timeout=%d sec (nowayout=%d)\n",
|
|
timeout, nowayout);
|
|
|
|
out:
|
|
return ret;
|
|
unreg_reboot:
|
|
unregister_reboot_notifier(&wdt_notifier);
|
|
unreg_regions:
|
|
release_region(wdt_io, 1);
|
|
goto out;
|
|
}
|
|
|
|
static void __exit wdt_exit(void)
|
|
{
|
|
misc_deregister(&wdt_miscdev);
|
|
unregister_reboot_notifier(&wdt_notifier);
|
|
release_region(wdt_io, 1);
|
|
}
|
|
|
|
module_init(wdt_init);
|
|
module_exit(wdt_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
|
|
MODULE_DESCRIPTION("w83627hf/thf WDT driver");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|